XC7Z100-L2FFG1156I - 800MHz Zynq-7000 SoC | AMD Xilinx
部品番号: XC7Z100-L2FFG1156I ✓ 生産中XC7Z100-L2FFG1156I 概要
A Zynq-7000 SoC belongs to the heterogeneous computing hierarchy that combines an ARM application processor and FPGA logic in one package. Unlike a standalone FPGA, the device can execute operating-system software while programmable logic handles parallel data paths, protocol handling, image processing, or low-latency control. The Kintex-7 fabric provides the logic resources needed for parallel architectures, while the Cortex-A9 subsystem supports conventional software execution through its ARM instruction-set architecture.
Key device characteristics include 444,000 FPGA logic cells, an 800 MHz Cortex-A9 core speed, dual ARM Cortex-A9 MPCore processing, and CoreSight debugging. The XC7Z100 designation identifies the highest-density member of the Zynq-7000 portfolio. The -2 speed designation and industrial temperature suffix distinguish this ordering code from other XC7Z100 variants. The large FCBGA package exposes a high-density mix of FPGA I/O, dedicated memory interfaces, serial transceivers, power pins, ground pins, and processor signals.
The device is intended for industrial embedded processing, machine vision, control systems, communications equipment, and test-and-measurement platforms. In these systems, the processor subsystem can manage software workloads, control flow, networking, and operating-system services, while FPGA logic accelerates deterministic operations that benefit from parallel processing. CoreSight support assists designers with hardware-assisted debug, trace, and verification of programmable logic and processor execution.
PCB implementation requires careful attention to the 1156-ball FCBGA escape routing, power delivery, decoupling, and thermal management. Use the AMD package pinout and UG865 package guidance when assigning balls and laying out the board. The high pin count makes via-in-pad or fanout techniques potentially necessary, while high-speed memory and transceiver interfaces require length matching and continuous return-path planning.
This page combines the manufacturer-device identity, searchable package and processor specifications, verified source links, practical implementation guidance, and a conservative assessment of drop-in alternatives. Because the exact XC7Z100-L2FFG1156I package and pin assignment details are not reproduced here, use the AMD Zynq-7000 package placement diagram and device pinout files before fabrication.
ドロップイン代替品: XC7Z100-L2FFG1156I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
XC7Z100-2FFG1156I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC7Z100-L2FFG1156I 最大定格&電気的特性
| Product Type | Zynq-7000 adaptive system-on-chip (SoC) |
| FPGA Family | Kintex-7 FPGA fabric |
| Processor Cores | 2 ARM Cortex-A9 MPCore cores |
| Processor Core Speed | 800 MHz |
| FPGA Logic Cells | 444,000 logic cells |
| Programmable Technology | 28 nm |
| Core Supply Voltage | 1 V |
| Debug Support | CoreSight |
| パッケージ | 1156-ball FCBGA |
| Package Dimensions | 35 mm x 35 mm |
| Ball Count | 1156 balls |
| 実装タイプ | Surface mount |
| Speed Grade | -2 |
| Temperature Grade | Industrial |
| Datasheet File Size | 717 KB |
| Datasheet Publication Date | 2016-07-28 |
XC7Z100-L2FFG1156I 35 mm x 35 mm ピン配置ガイド
XC7Z100-L2FFG1156I (35 mm x 35 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC7Z100-L2FFG1156I.
詳細は データシート をご参照ください。
主な用途
XC7Z100-L2FFG1156I の用途: 6 件s: Industrial Machine Vision, Programmable Logic Control, Communications Infrastructure, Test and Measurement, Video Processing, Aerospace and Defense Processing.
Industrial Machine Vision
The XC7Z100-L2FFG1156I fits industrial machine-vision systems that combine sensor acquisition, parallel image processing, and higher-level control. Its 444,000 Kintex-7 logic cells can accelerate pixel operations, filtering, thresholding, and data reduction, while the dual ARM Cortex-A9 subsystem at 800 MHz can run camera control, image analysis, communications, and supervisory software. Placing both functions in one package reduces interprocessor data movement compared with a separate processor-and-FPGA architecture. The implementation must still account for the 1156-ball FCBGA escape requirements, DDR memory routing, transceiver or sensor interfaces, power-decoupling density, and thermal performance under continuous imaging workloads.
おすすめ
Programmable Logic Control
The XC7Z100-L2FFG1156I is suited to programmable logic control systems requiring deterministic I/O handling alongside a hosted application processor. FPGA fabric can implement timing-critical state machines, motor-control interfaces, encoder processing, or protocol engines, while the 800 MHz dual-core Cortex-A9 subsystem executes control algorithms, diagnostics, and communication services. The 444,000 logic cells provide substantial room for parallel datapaths without using another external FPGA. For industrial deployment, engineers should partition real-time functions into programmable logic, reserve the processor for supervisory tasks, and validate timing and I/O standards against the package pinout before releasing the PCB.
おすすめ
Communications Infrastructure
The XC7Z100-L2FFG1156I can support communications equipment that benefits from combining packet processing in software with hardware-assisted data paths. The ARM Cortex-A9 subsystem handles the control plane, operating-system services, management protocols, and higher-layer processing, while the 444,000-cell Kintex-7 fabric can implement packet classification, buffering, filtering, or custom interfaces. Its 800 MHz processor speed supports responsive management workloads, and the large FPGA fabric allows protocol-specific logic to be consolidated with the processor. Board-level implementation requires careful treatment of high-speed transceiver paths, reference clocks, memory topology, power integrity, and thermal dissipation rather than treating the large FCBGA as a conventional low-pin-count device.
おすすめ
Test and Measurement
The XC7Z100-L2FFG1156I is appropriate for test-and-measurement instruments that need flexible acquisition, timing, and signal-processing logic alongside an embedded control processor. FPGA fabric can implement parallel ADC channels, digital pattern generation, trigger logic, and real-time processing, while the dual-core ARM subsystem manages instrument control, calibration, data storage, and user interfaces. The 444,000 logic cells provide a high-capacity fabric for consolidating multiple channels, and the 800 MHz Cortex-A9 speed supports an embedded control application. Success depends on disciplined clock planning, low-noise power design, controlled-impedance routing, DDR memory implementation, and thermal testing across the intended ambient range.
おすすめ
Video Processing
The XC7Z100-L2FFG1156I fits video-processing systems where software control and real-time pixel manipulation must coexist. The Kintex-7 FPGA fabric can process multiple video streams, perform scaling or filtering, and interface to sensors or displays through parallel, serial, or network-based pathways. The dual-core Cortex-A9 subsystem at 800 MHz can execute configuration, analytics, buffering management, and network services. Consolidating these functions in one SoC can reduce board area and latency relative to a discrete processor and FPGA design. Engineers should establish early whether the chosen external memory, display interface, and synchronization network meet the required throughput, then validate power cycling and signal integrity on the 1156-ball FCBGA layout.
おすすめ
Aerospace and Defense Processing
The XC7Z100-L2FFG1156I can serve as a high-density adaptive computing platform in aerospace, defense, and ruggedized industrial systems that combine real-time signal processing with embedded control software. Its 444,000-cell Kintex-7 fabric supports parallel algorithms and configurable I/O, while the 800 MHz dual-core ARM subsystem supports mission software, health monitoring, and configuration management. The large FPGA resource count can consolidate functions that would otherwise require multiple programmable devices, while CoreSight aids hardware-assisted verification. Qualification for a specific flight or defense application must be established independently; the part's industrial suffix does not itself establish AEC-Q100, MIL-STD, or program-specific qualification.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC7Z100-L2FFG1156I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC7Z100-2FFG1156I |
|---|---|---|
| Brand | AMD | AMD |
| Package | 1156-ball FCBGA (35 mm x 35 mm) | 1156-ball FCBGA (35 mm x 35 mm) |
| Processor | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| Core Speed | 800 MHz | 800 MHz |
| FPGA Logic Cells | 444,000 logic cells | 444,000 logic cells |
| FPGA Fabric | Kintex-7 | Kintex-7 |
| Process Technology | 28 nm | 28 nm |
| Core Supply Voltage | 1 V | 1 V |
| Debug Support | CoreSight | CoreSight |
| Ordering Suffix | -L2FFG1156I | -2FFG1156I |
主な差別化要因
- Combines an 800 MHz dual-core ARM processor with programmable Kintex-7 logic (vs XC7Z100-2FFG1156I)
- Provides the highest-density Zynq-7000 resource level identified for this device family (vs XC7Z100-2FFG1156I)
- Combines software processing and hardware acceleration in one 1156-ball package (vs XC7Z100-2FFG1156I)
設計ノート
Plan the 1156-ball FCBGA escape before committing the stack-up. Use the AMD XC7Z100-FFG1156 package placement diagram and official pinout files to identify power, ground, high-speed transceiver, memory, clock, and general I/O balls. Verify every ball location mechanically against the selected package drawing because package suffixes and device variants can differ in bonding, power, or configuration details.
Implement each required power rail as a separate, low-impedance delivery network with dense local decoupling at the device. Place the smallest-value capacitors directly beneath or adjacent to the FCBGA balls, use multiple vias for each supply and ground connection, and keep sensitive routing away from switching-converter power stages. Validate voltage tolerance, sequencing, startup behavior, and transient response against the AMD reference design.
Estimate junction temperature from total device dissipation, the PCB thermal resistance, and the intended ambient temperature before defining the heatsink and airflow strategy. The FCBGA has many short thermal connections, but package performance still depends on via arrays, copper distribution, board construction, enclosure heat transfer, and neighboring heat sources. Test the assembled PCB under worst-case processor and FPGA utilization rather than relying only on a nominal calculation.
Use continuous reference planes and controlled-impedance routing for DDR memory, clocks, serial transceivers, and other high-speed interfaces. Match clock and data routing according to the AMD device and design-migration guidance, and avoid plane splits, stubs, and right-angle transitions where they create reflection or crosstalk. Validate the final stack-up with field solvers and verify eye diagrams on production hardware.
コンプライアンス情報
The industrial temperature suffix does not establish AEC-Q100 qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the cited device information and remain unknown.