XMC4402F100K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
部品番号: XMC4402F100K256ABXQSA1 ✓ 生産中XMC4402F100K256ABXQSA1 概要
An Arm Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor core widely used in embedded control, industrial automation, communications, and connected equipment. The XMC4000 family combines the Cortex-M4 core with memory, timing, serial, digital, analog, and Ethernet-related resources on one integrated circuit. This integration allows an industrial controller to handle control loops, communication tasks, and supervisory logic without requiring several discrete processors.
The XMC4402F100K256ABXQSA1 provides 256 KB of Flash for program storage, 80 KB of SRAM for working memory, a maximum clock frequency of 120 MHz, and Ethernet support according to the Infineon product page. Its 32-bit architecture supports efficient handling of multiple I/O tasks, while the 100-pin LQFP exposed-pad package provides a high pin count for external interfaces and a thermal path for improved heat dissipation. The 3.3 V operating voltage is stated in the product listing.
The device is suitable for industrial automation controllers, networked sensors, motor-control supervisory systems, building automation equipment, and industrial communications equipment. Ethernet is particularly useful when the controller must exchange real-time status, configuration, or process data with supervisory systems. The 256 KB Flash capacity is appropriate for firmware, protocol stacks, and application code, while 80 KB of SRAM supports buffering and time-critical execution.
Designers should treat the exposed pad as a thermal and electrical land-pattern feature and follow the manufacturer land-pattern guidance when placing the device on a multilayer PCB. Decoupling should be placed directly at the supply pins, and the 120 MHz operating mode requires careful clock, reset, and signal-routing discipline. Firmware must also account for the exact peripheral assignments, clock configuration, startup behavior, and peripheral limits defined by the Infineon documentation for this ordering code.
This page summarizes the principal orderable-device characteristics and distinguishes the exact XMC4402F100K256ABXQSA1 configuration from related XMC family members. Engineers should compare peripheral mix, memory size, qualification, package, and software compatibility before approving any substitution. Use the Infineon product page and datasheet for the definitive pin description, electrical limits, exposed-pad layout, and configuration details.
ドロップイン代替品: XMC4402F100K256ABXQSA1 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XMC4402F100K256ABXQSA1 (同一形状・フットプリント) — 相違点: Product Type, Package, Architecture, Flash Memory, Ethernet Support.
XMC4400F100K256BAXUMA2
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XMC4400F100K512BAXUMA1
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XMC4300F100K256AAXUMA1
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XMC4300F100K256AAXQMA1
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XMC4400F100F512BAXUMA1
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XMC4402F100K256ABXQSA1 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Product Series | XMC4000 |
| CPU Core | ARM Cortex-M4 |
| Instruction Set | 32-bit RISC |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 |
| SRAM | 80 KB |
| Ethernet Support | Yes |
| Operating Voltage | 3.3 V |
| パッケージ | PG-LQFP-100-11 |
| ピン数 | 100 pins |
| Package Type | LQFP with exposed pad |
| 実装タイプ | Surface mount |
| Shipping Package | Tray |
| Qualification Segment | Industrial |
XMC4402F100K256ABXQSA1 tray ピン配置ガイド
XMC4402F100K256ABXQSA1 (tray パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XMC4402F100K256ABXQSA1.
詳細は データシート をご参照ください。
主な用途
XMC4402F100K256ABXQSA1 の用途: 6 件s: Industrial Automation Controller, Industrial Ethernet Gateway, Networked Sensor Hub, Motor-Control Supervisory System, Building Automation Equipment, Industrial Communication Equipment.
Industrial Automation Controller
The XMC4402F100K256ABXQSA1 fits industrial automation controllers that coordinate digital I/O, field-bus or serial communications, and supervisory logic around a 120 MHz Arm Cortex-M4 core. Its 256 KB Flash accommodates application firmware and communication stacks, while 80 KB of SRAM supports working buffers and time-critical tasks. The 100-pin LQFP exposes substantially more peripheral connections than a small-package MCU. Ethernet support also permits the controller to exchange diagnostics, configuration data, and process status with a supervisory system. Designers should allocate supply bypassing directly to the device pins and follow the exposed-pad land pattern to maintain signal integrity and heat dissipation at 120 MHz.
おすすめ
Industrial Ethernet Gateway
The XMC4402F100K256ABXQSA1 is suitable for an industrial Ethernet gateway that translates local sensor or actuator data into network traffic while retaining local real-time control. Its 120 MHz single-core Cortex-M4 architecture supports responsive protocol handling, and the 256 KB Flash provides room for firmware, network stacks, and configuration parameters. The 80 KB SRAM reduces pressure during packet buffering or protocol processing. A practical implementation requires an appropriate Ethernet PHY, magnetics, isolation as required by the installation, controlled-impedance routing, and firmware drivers matching the selected device configuration. The exposed pad should be connected according to the manufacturer package guidance and tied to the intended ground reference.
おすすめ
Networked Sensor Hub
A networked sensor hub can use the XMC4402F100K256ABXQSA1 to sample external sensors, perform local filtering and threshold logic, and publish results over Ethernet. The Cortex-M4 core's 120 MHz maximum frequency provides useful performance margin for protocol processing alongside control tasks. With 256 KB of Flash and 80 KB of SRAM, the device can hold substantial firmware and maintain working data without continuous external-memory access. The 100-pin package provides enough pins for digital sensor interfaces, serial converters, status indicators, and communication circuitry. Design validation should cover input thresholds, analog limits, clock accuracy, Ethernet physical-layer requirements, and firmware timing under the worst supported sensor and network loading.
おすすめ
Motor-Control Supervisory System
The XMC4402F100K256ABXQSA1 can serve as the supervisory processor in an industrial motor-control system, handling command interpretation, diagnostics, communications, and protection coordination while a dedicated control stage executes fast current-loop functions. Its 120 MHz Cortex-M4 core supports concurrent supervisory tasks, and the 256 KB Flash is suitable for control algorithms, parameter storage, and communication firmware. The 80 KB SRAM allows meaningful task and diagnostic buffering. The 100-pin LQFP package also provides a broad pin budget for encoder, resolver, brake, fault, and communications signals. Exact use requires reviewing pin multiplexing, peripheral availability, timing, and safety architecture in the manufacturer documentation.
おすすめ
Building Automation Equipment
The XMC4402F100K256ABXQSA1 is appropriate for building-automation equipment such as room controllers, HVAC supervisory units, and distributed building gateways. Its industrial Arm Cortex-M4 architecture combines real-time I/O handling with Ethernet connectivity, enabling local control while sharing occupancy, temperature, alarm, and equipment-status information. The 256 KB Flash supports application logic and network protocol code, and 80 KB of SRAM supports message processing and state retention. The 100-pin package permits integration of room sensors, digital outputs, bus transceivers, and service interfaces. Firmware must implement appropriate watchdogs, safe-state behavior, communications retry logic, and recovery paths for intermittent network conditions.
おすすめ
Industrial Communication Equipment
The XMC4402F100K256ABXQSA1 fits communication equipment that must combine deterministic embedded processing with an Ethernet interface. At up to 120 MHz, the Cortex-M4 core can service protocol state machines, packet processing, diagnostics, and configuration updates. Its 256 KB Flash provides code storage for network stacks and field protocols, while 80 KB of SRAM supports transmit and receive buffers. The high-pin-count LQFP package can accommodate digital status lines, serial peripherals, management interfaces, and clock-related circuitry. Layout must account for controlled-impedance Ethernet routing, separation of sensitive analog or low-speed signals, local PHY decoupling, and a solid exposed-pad thermal and ground connection.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XMC4402F100K256ABXQSA1 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XMC4400F100K256BAXUMA2 | XMC4400F100K512BAXUMA1 | XMC4300F100K256AAXUMA1 | XMC4300F100K256AAXQMA1 | XMC4400F100F512BAXUMA1 |
|---|---|---|---|---|---|---|
| Package | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 |
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon |
| Product Series | XMC4000, XMC4402 | XMC4000, XMC4400 | XMC4000, XMC4400 | XMC4000, XMC4300 | XMC4000, XMC4300 | XMC4000, XMC4400 |
| CPU Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Flash Memory | 256 KB | 256 KB | 512 KB | 256 KB | 256 KB | 512 KB |
主な差別化要因
- Exact 256 KB Flash configuration (vs XMC4400F100K512BAXUMA1)
- XMC4402 Ethernet-oriented device configuration (vs XMC4300F100K256AAXUMA1)
- Deterministic memory budget for industrial firmware (vs XMC4400F100F512BAXUMA1)
設計ノート
Use the Infineon PG-LQFP-100-11 land pattern and exposed-pad guidance without changing pad dimensions or thermal-via geometry. Keep the exposed-pad connection, ground reference, and decouplers consistent with the manufacturer stack-up recommendations. At a maximum clock frequency of 120 MHz, route clocks away from Ethernet and high-speed digital nets, and avoid placing test points or copper disruptions beneath sensitive package edges.
Place the required supply and ground decoupling capacitors immediately adjacent to the corresponding pins, with the shortest possible current-loop path. Verify startup current, active current, I/O drive demand, Ethernet-PHY load, regulator headroom, and worst-case supply tolerance. The device operates from a 3.3 V rail, but total rail current also depends on external Ethernet and interface circuitry, so size the regulator for the complete board rather than the microcontroller alone.
Plan the Ethernet section as a controlled-impedance interface. Use the manufacturer's reference layout for PHY, magnetics, line-side components, and return paths; keep the digital processor and clock nets separated from differential pairs wherever practical. Provide local PHY and filtering capacitors at their pins, avoid long stubs, and follow isolation requirements when the Ethernet transformer or an alternative network interface is used.
Do not treat the XMC4402 order code as interchangeable with XMC4400 or XMC4300 solely because their order codes contain 100K256 and use related packages. Before a board revision, compare the complete pin description, peripheral instance map, clock tree, Ethernet implementation, memory map, startup behavior, exposed-pad connection, and qualification markings. A replacement also requires validation of the existing firmware and boot configuration.
コンプライアンス情報
The product is identified as an industrial microcontroller, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not identified in the cited product pages.