집적 회로

PIC24FJ512GA606-I/PT

PIC24FJ512GA606-I/PT - 16-bit 32MHz MCU, 512KB Flash, 64-TQFP

The Microchip Technology PIC24FJ512GA606-I/PT is a 16-bit PIC24F microcontroller running at up to 32 MHz, integrating 512 KB of dual-partition Flash (170K x 24 organization) and housed in a 64-pin TQFP (10x10 mm) package. The device belongs to the eXtreme Low Power (XLP) family, designed for industrial, computing, medical/fitness and portable applications that demand long battery life and reliable field firmware updates. The integrated dual-partition Flash with Live Update capability allows the CPU to execute from one partition while the other is being reprogrammed in the background, enabling fail-safe OTA-style firmware upgrades without external memory. ECC (Error Correction Code) on the Flash array improves data retention integrity for industrial and safety-sensitive deployments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and a rich set of peripherals such as timers, ADC, communication interfaces, and GPIO into one package. The PIC24F family specifically combines a 16-bit modified Harvard core with extensive peripheral integration. Within the broader taxonomy, the PIC24FJ512GA606-I/PT is a Flash-based 16-bit microcontroller, belonging to the power management and embedded control category of semiconductor devices. Key features of this device include a wide operating voltage range typical of XLP-class parts, low sleep current in the microamp range, multiple communication peripherals (UART, SPI, I2C), up to 53 general-purpose I/O pins, an integrated 12-bit A/D converter, and a 16-bit digital-to-analog converter on selected variants. The 64-pin TQFP package exposes a generous peripheral pinout while remaining compatible with hand-soldering and rework. Hardware peripherals include capture/compare/PWM modules and a real-time clock calendar, making it suitable for motor control, sensor hubs, and connected IoT endpoints. In terms of architecture, the PIC24FJ512GA606-I/PT uses a 16-bit modified Harvard core with separate program and data paths, a 32 KB SRAM data memory, and a deterministic instruction set optimized for C-compiled code. The integrated DMA controller offloads data movement between peripherals and memory, freeing the core for application logic. This architectural balance makes the device competitive against ARM Cortex-M0+ MCUs in power-conscious applications. Typical applications include industrial sensor hubs, low-power IoT edge nodes, battery-powered medical/fitness devices, USB peripherals, graphical user interfaces with integrated LCD or graphics drivers, and automotive accessory modules. The dual-partition Flash is particularly valuable for products that must update firmware in the field without bricking the device. When designing with this device, allocate the programming/debug pins (PGECx/PGEDx) so that the ICSP interface remains accessible in production boards. Consider migrating to the pin-compatible PIC24FJ1024GA606-I/PT if future code growth exceeds 512 KB, since both share the same 64-pin TQFP footprint and pinout. This page synthesizes distributor pricing, drop-in alternatives, and design notes beyond what is available on the manufacturer datasheet.

견적 요청 문의하기

PIC24FJ512GA610-E/PT

PIC24FJ512GA610-E/PT - 32MHz 16-Bit MCU 512KB Flash | Microchip

The Microchip Technology PIC24FJ512GA610-E/PT is a 16-bit RISC microcontroller in the PIC24F family featuring a 32 MHz CPU core (16 MIPS), 512 KB dual-partition Flash program memory with live-update support, and 32 KB SRAM, all housed in a 100-pin TQFP (12x12 mm) package. It integrates up to 85 general-purpose I/O, multiple serial peripherals including 6 UART, 3 SPI, 3 I2C, and IrDA, plus configurable logic cells (CLC), CTMU, and a 16-bit Parallel Master Port (PMP). The -E/PT suffix denotes the automotive temperature grade (-40C to +125C) and the TQFP-100 package. A PIC24F microcontroller is a 16-bit modified-Harvard RISC MCU designed for low-power, mixed-signal embedded applications. It belongs to the hierarchy Microcontroller -> MCU -> 16-bit MCU -> PIC24F family -> PIC24FJ GA-series -> Power Management Aware MCU. Compared with 8-bit MCUs, PIC24F parts execute most instructions in a single cycle with a 16-bit data path, supporting C compilation and richer peripherals while maintaining the low-cost, deterministic behavior PIC is known for. The PIC24FJ512GA610's headline features are 512 KB dual-partition Flash allowing field firmware upgrades without downtime, 32 KB SRAM for data buffering, a 32 MHz 16 MIPS core for real-time DSP-style math, AEC-Q100 qualification under the -E/PT grade, and a 2.0V-3.6V wide operating range suitable for both 3.3V and battery-powered designs. Its peripheral set includes USB 2.0 full-speed OTG, multiple PWM/SCCP modules, a 12-bit ADC, comparators, and RTCC for timekeeping. Architecturally, the device is built on an enhanced 16-bit modified-Harvard core with hardware multiply/divide, a 24-bit instruction word, and nanoWatt XLP deep-sleep modes that drop current to sub-microamp levels. The dual-partition Flash lets one partition run while the other is reprogrammed, enabling live update (bootloader-driven A/B firmware swap). Typical applications include automotive body and HMI controllers, industrial HMI panels, USB peripherals, medical patient monitors, low-power IoT gateways, and consumer appliances with TFT displays. The -E/PT grade (-40C to +125C) makes it specifically suited to under-hood and dashboard automotive ECUs that demand AEC-Q100 reliability. When designing with this MCU, allocate decoupling capacitance (100 nF per VDD/VSS pair plus bulk 4.7-10 uF), follow the 100-pin TQFP layout guidelines (12x12 mm body with 0.4 mm pitch), and ensure the dual-partition bootloader is initialized during firmware bring-up. The wide 2.0V-3.6V supply range allows direct Li-ion battery operation. This page synthesizes distributor pricing, AEC-Q100 same-package drop-in alternatives (industrial and tape-reel variants), and live-update Flash design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기

PIC24FJ512GA610T-I/BG

PIC24FJ512GA610T-I/BG - 32MHz 16-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC24FJ512GA610T-I/BG is a 16-bit microcontroller from the PIC24F family that integrates 512KB of dual-partition Flash memory with Live Update capability, 32KB of SRAM, and a 32MHz PIC24 CPU core in a 121-ball TFBGA (10x10 mm) package. It executes up to 16 MIPS, supports a wide 2.0V to 3.6V operating voltage range, and is targeted at industrial, medical/fitness, computer, and portable applications requiring long battery life and data transfer without external memory. The 'T' suffix denotes tape-and-reel packaging while 'I' specifies the -40C to +85C industrial temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals such as timers, ADC, communication interfaces, and GPIO onto a single silicon die. The PIC24FJ family sits in the broader 16-bit MCU category, positioned between 8-bit MCUs (PIC16, PIC18) and 32-bit MCUs (PIC32, ARM Cortex-M). Within the power-management hierarchy, MCUs sit alongside DSPs, FPGAs, and microprocessors as the principal embedded computing elements. The PIC24FJ512GA610 is differentiated by its dual-partition Flash with Live Update, allowing firmware to be updated in the field without stopping the application, plus a rich peripheral set including USB, capacitive touch, parallel master port, and a 16-channel 12-bit ADC. Its nanoWatt XLP (eXtreme Low Power) technology delivers sleep currents in the sub-microamp range, directly addressing battery-powered portable designs. Architecturally, the device uses a modified Harvard architecture with separate program and data buses, a 16-bit wide datapath, and a peripheral set mapped through the Peripheral Pin Select (PPS) subsystem. This PPS flexibility lets engineers remap digital peripherals to a wide choice of I/O pins, simplifying PCB layout in dense designs. Typical applications include industrial control panels, USB peripherals, portable medical monitors, fitness wearables, and low-power IoT sensor hubs. The 121-ball TFBGA package is suited to compact boards where high pin count is required but vertical clearance is limited. Design considerations for this part focus on PCB routing density around the 0.8mm pitch BGA, decoupling strategy for the dual VDD/VDDCORE rails, and proper reset circuit design. The Live Update dual-partition feature requires careful bootloader design to avoid bricking the device during field updates. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기

PIC24FJ512GA610T-I/PT

PIC24FJ512GA610T-I/PT - 16-Bit 32MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC24FJ512GA610T-I/PT is a 16-bit microcontroller from the PIC24F family featuring 512KB of dual-partition Flash with Live Update capability, 32KB RAM, and a 32MHz operating frequency (16 MIPS) housed in a 100-pin TQFP (12x12mm) package. It operates from a 3.3V supply across an industrial -40C to +85C temperature range and is supplied in Tape & Reel packaging. A 16-bit microcontroller (MCU) is an embedded processor with a 16-bit data path, providing a middle ground between 8-bit and 32-bit devices for applications requiring more computational throughput, larger addressable memory, and richer peripherals than 8-bit MCUs while avoiding the cost and complexity of 32-bit cores. The PIC24F family specifically targets ultra-low-power applications with XLP (eXtreme Low Power) technology, and the GA610 sub-family is differentiated by its large memory, integrated graphics controller (for direct LCD/segmented display drive), and dual-partition Flash with Live Update. Key features of the PIC24FJ512GA610T-I/PT include 512KB (170K x 24) Flash memory supporting dual-partition live firmware updates, 32KB SRAM, multiple serial interfaces (I2C, SPI, UART), USB support, a Real-Time Clock/Calendar (RTCC), and up to 85 I/O pins. The integrated Charge Time Measurement Unit (CTMU) and Configurable Logic Cell (CLC) provide flexible on-chip signal processing and timing functions. Architecturally, the PIC24FJ512GA610 uses a modified Harvard architecture with a 16-bit data path, 24-bit instruction word, and hardware multiply/divide, achieving 16 MIPS at 32MHz. The dual-partition Flash with Live Update allows the device to run from one Flash partition while the other is being reprogrammed, enabling firmware updates without service interruption - a critical capability for industrial and IoT applications requiring high availability. Typical applications include industrial control systems, low-power IoT edge nodes, medical and fitness devices, portable battery-powered instruments, USB peripherals, and consumer products requiring segmented LCD displays. The large 512KB Flash supports complex protocol stacks, while the integrated peripherals reduce BOM cost. When designing with this MCU, ensure proper decoupling (100nF + bulk) near each VDD pin and follow Microchip's emulator/debugger connection recommendations for ICSP. The TQFP-100 footprint allows hand-soldering for prototypes but requires a reflow profile compatible with JEDEC J-STD-020. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes that go beyond the manufacturer datasheet to accelerate your design-in decision.

견적 요청 문의하기

PIC24FJ512GB606-E/PT

PIC24FJ512GB606-E/PT - 16-bit XLP MCU 512KB Flash USB 64-TQFP | Microchip

The Microchip Technology PIC24FJ512GB606-E/PT is a 16-bit XLP (eXtreme Low Power) microcontroller featuring 512 KB dual-partition Flash program memory, 32 KB RAM, and integrated USB On-The-Go (OTG) connectivity. It runs at up to 32 MHz (16 MIPS) on a modified Harvard architecture and is housed in a 64-pin TQFP (10x10 mm) package. Per the Microchip PIC24FJ512GB606 datasheet (DS30009907), the device also includes error correction code (ECC) on Flash and supports Live Update for fail-safe dual-image firmware upgrades. What is a PIC24F microcontroller? The PIC24F is a family of 16-bit microcontrollers from Microchip built on a modified Harvard architecture that separates program and data buses, allowing simultaneous instruction fetch and data access. PIC24F devices sit in the hierarchy: 16-bit microcontroller -> PIC24 family -> PIC24FJ subfamily (Flash, eXtreme Low Power) -> USB-capable 'GB' series -> 512KB Flash '512GB' group. They bridge 8-bit PIC and 32-bit PIC32 performance, with the XLP variants targeting battery-powered and always-on applications. Key features of this device include a 16-bit core with single-cycle 16x16 multiply, two 3-wire SPI modules, two I2C modules, four UART modules, five 16-bit timers, and a 10-bit 500 ksps ADC with up to 16 channels. The integrated USB 2.0 Full-Speed OTG controller with PHY eliminates external transceiver components. Up to 51 GPIO pins are available, and the device supports up to four DMA channels for offloading CPU data movement. The PIC24FJ512GB606 uses a 2.2V to 3.6V VDD operating range with a dedicated VBAT pin for RTC backup from a coin cell. Its XLP technology delivers typical sleep currents below 1 uA with RTC retention, addressing battery lifetime targets in IoT and wearable designs. Live Update allows swapping between two independent Flash partitions for secure firmware-over-the-air updates. Typical applications include USB peripherals, human-interface devices (HID), low-power IoT sensor nodes, industrial data loggers, and automotive body controllers (AEC-Q100 qualification applies). The 512 KB dual-partition Flash is well suited to devices requiring Bluetooth/Wi-Fi host stacks or USB class firmware plus application code. When designing with this part, budget carefully between code size and RAM, and verify the 64-pin TQFP footprint against your PCB layout. For battery operation, leverage the deep-sleep modes with RTC retention to minimize average current. This page consolidates pricing, drop-in alternatives, and design notes that complement the manufacturer datasheet.

견적 요청 문의하기

PIC24FJ512GB606T-I/MR

PIC24FJ512GB606T-I/MR - 16-Bit 32MHz 512KB Flash USB MCU | Microchip

The Microchip Technology PIC24FJ512GB606T-I/MR is a 16-bit RISC microcontroller from the PIC24F family featuring a modified Harvard architecture, 512KB of dual-partition Flash with Live Update capability, 32KB of RAM, and integrated USB 2.0 full-speed device/host/OTG controller, all housed in a 64-pin QFN (MR) package measuring 9x9 mm. The core operates up to 32 MHz delivering 16 MIPS of performance, with an extended operating voltage range of 2.0V to 3.6V and eXtreme Low Power (XLP) sleep currents below 1 uA typical. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data memory, and programmable peripherals. The PIC24F architecture represents the mid-tier of Microchip's 16-bit MCU portfolio, sitting between the 8-bit PIC16/PIC18 devices and the 32-bit PIC32MX/dsPIC families, and belongs to the broader power management and embedded control category of semiconductors. The 'FJ' suffix denotes Flash-based program memory with XLP technology, while the 'GB' sub-family adds USB and graphics-friendly peripherals. Key features include a 16-channel 12-bit ADC with 10-bit option, three I2C, two IrDA, three SPI, and six UART interfaces, plus a Parallel Master Port (PMP) for graphics or external memory expansion. The dual-partition Flash allows field firmware swap between two image banks without external memory, enabling Live Update for applications requiring zero-downtime firmware refresh. Hardware crypto accelerators and a True Random Number Generator support secure connectivity. The device integrates a 32 kHz and a primary oscillator with PLL, four 16-bit timers, five capture/compare/PWM modules, and a CTMU for capacitive touch sensing. Advanced peripherals include a 9-bit or 16-bit Parallel Master Port, multiple DMA channels, and a real-time clock calendar. The QFN-64 package exposes 52 user I/O lines with multi-voltage I/O support. Typical applications include industrial USB peripherals, medical fitness devices, portable data loggers, computer peripherals, and low-power wireless sensor nodes. The integrated USB OTG eliminates the need for external bridges, while XLP extends battery life in wearable designs. Designers should plan for decoupling on all VDD/VSS pairs and follow Microchip's recommended analog/digital ground partitioning. Programming is supported via ICSP on dedicated PGECx/PGEDx pairs and the JTAG boundary scan. This page synthesizes the Verified Web Data, drop-in alternatives in the same 64-QFN footprint, and practical design notes not assembled in the manufacturer datasheet alone.

견적 요청 문의하기

PIC24FJ512GB606T-I/PT

PIC24FJ512GB606T-I/PT - 512KB Flash 32MHz USB-OTG MCU TQFP-64 | Microchip

The Microchip Technology PIC24FJ512GB606T-I/PT is a 16-bit PIC24F RISC microcontroller featuring 512 KB dual-partition Flash with Live Update, 32 KB SRAM, and USB-OTG on-chip, housed in a 64-pin TQFP (PT) 10x10 mm package. It runs up to 32 MHz (16 MIPS) from a 2.0 V to 3.6 V supply and targets low-power applications requiring large memory and full-speed USB without external memory. A microcontroller (MCU) is a single-chip computer integrating a CPU core, Flash program memory, SRAM, and peripherals on one die. The PIC24F family is Microchip's 16-bit modified-Harvard architecture positioned between 8-bit PIC16/PIC18 devices and 32-bit PIC32 parts, optimized for low-power operation with features such as nanoWatt XLP technology, multiple power-saving modes, and peripheral pin select for flexible signal routing. Key features of the PIC24FJ512GB606 include 512 KB self-programmable Flash split into dual partitions for Live Update firmware upgrades, 32 KB SRAM, 6 UART modules with IrDA and LIN support, 6 PWM channels, 7 timers, 3 analog comparators, 8 DMA channels, USB-OTG full-speed, Configurable Logic Cells (CLC), and a Charge Time Measurement Unit (CTMU) for capacitive touch or precise timing. The dual-partition Flash is a notable differentiator versus single-bank MCUs, allowing field firmware updates without device downtime. Typical applications include industrial HMI and sensor hubs, portable medical/fitness devices with USB logging, USB peripherals such as HID or CDC bridges, low-power IoT sensor nodes, and consumer products that must be field-upgradable over USB. The combination of 512 KB Flash, USB-OTG, and extensive analog/digital peripherals removes the need for an external memory device in most designs. When designing with this part, confirm that your linker script reserves equal dual partitions (Live Update requirement), select the appropriate oscillator configuration (e.g., 8 MHz primary with 32 MHz PLL), and follow Microchip's MPLAB Harmony code framework for USB stack integration to shorten development time.

견적 요청 문의하기

PIC24FJ512GB610-E/PT

PIC24FJ512GB610-E/PT - 16-Bit 32MHz MCU, 512KB Flash | Microchip

The Microchip Technology PIC24FJ512GB610-E/PT is a 16-bit PIC microcontroller built on an eXtreme Low Power (XLP) CMOS core, delivering 32 MHz (16 MIPS) performance with 512 KB of dual-partition Flash program memory and 32 KB of RAM, housed in a 100-pin TQFP (12x12 mm) package. The -E suffix indicates an extended (-40C to +125C) operating temperature range and AEC-Q100 automotive qualification, while the /PT suffix denotes the 100-pin TQFP package. A 16-bit microcontroller (MCU) is an embedded processor that integrates CPU, memory, and peripherals on a single die. The PIC24F family sits in the hierarchy: PIC24F -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. XLP technology dramatically reduces active and sleep-mode current, enabling years of battery life in always-on applications. Dual-partition Flash enables Live Update firmware upgrades without downtime, a critical feature for industrial and IoT systems. Key features include a hardware USB 2.0 full-speed On-The-Go (OTG) controller, a 16-channel 10-bit ADC with 500 ksps throughput, four I2C/SPI/UART modules, five 16-bit timers, and a Parallel Master Port (PMP) for external memory. The device offers 85 general-purpose I/O pins with peripheral pin select (PPS) remapping for flexible PCB routing, plus a Real-Time Clock/Calendar (RTCC) with battery backup support. Architecturally, the PIC24FJ512GB610 employs a modified Harvard architecture with separate program and data buses, 24-bit wide instruction words, and a 16-bit data path. This delivers predictable deterministic interrupt latency and high code density. The integrated USB OTG PHY eliminates external transceiver components, and the CTMU (Charge Time Measurement Unit) enables touch and capacitive sensing without extra silicon. Typical applications include industrial control and HMI panels, automotive body and infotainment ECUs, USB peripherals and HID devices, low-power IoT sensor nodes, and portable medical instrumentation. The USB OTG controller and dual-partition Flash particularly suit devices requiring field-upgradable firmware with strict zero-downtime constraints. Design consideration: the 100-pin TQFP requires careful PCB layout to route 85 GPIO pins plus USB differential pair, JTAG/ICSP programming interface, and analog/digital supply separation. Always provide a 10 uF bulk capacitor near VDD and a 0.1 uF decoupling cap per supply pin per Microchip's PIC24FJ512GB610 family reference manual. This page synthesizes Microchip datasheet specifications, distributor pricing across DigiKey and Newark, parametrically verified drop-in alternatives, and practical USB + dual-partition Flash design guidance not consolidated elsewhere.

견적 요청 문의하기

PIC24FJ512GB610-I/PT

PIC24FJ512GB610-I/PT - 16-Bit 32MHz MCU, 512KB Flash, USB | Microchip

The Microchip Technology PIC24FJ512GB610-I/PT is a 16-bit PIC24F microcontroller featuring a 32 MHz core, 512 KB of dual-partition Flash with Live Update, 32 KB RAM, integrated USB 2.0 Full-Speed On-The-Go (OTG), and an 85 I/O count in a 100-pin TQFP (12x12 mm) package. It is engineered for low-power embedded designs that require large program memory, peripheral connectivity, and storage without external memory, with industrial-grade -40 °C to +85 °C operation from a 2.0 V to 3.6 V single supply. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), working memory (RAM), and a peripheral set on one die. Within Microchip's taxonomy, the PIC24FJ family sits in the 16-bit modified-Harvard performance tier above the 8-bit PIC16/PIC18 families and below the dsPIC33/PIC32 lines, offering 16 MIPS throughput with a C-friendly architecture. The GB610 sub-family adds USB connectivity, dual-partition Flash for Live Update firmware swaps, and is positioned for industrial, medical/fitness, computer, and portable applications requiring long battery life. Key features include a 2.0 V to 3.6 V wide single-supply operating range, configurable 10-bit/12-bit ADC resolution, multiple serial interfaces (UART, SPI, I2C), and hardware Cryptographic Engine for AES on select variants. The Live Update dual-partition Flash eliminates firmware update downtime by allowing background writes to an inactive partition followed by atomic switchover. The USB 2.0 Full-Speed OTG module supports both host and device roles, making the part suitable for self-powered peripherals. The PIC24FJ512GB610-I/PT ships in a 100-pin TQFP (12x12 mm) package. The /PT suffix denotes the TQFP package and tray packaging. The -I/ suffix denotes the industrial temperature grade. Pin-compatible variants include PIC24FJ256GB610 and PIC24FJ1024GB610 in the same TQFP-100 footprint, enabling memory-size scaling without PCB rework. Typical applications include industrial control panels, USB medical/fitness devices, portable data loggers, computer peripherals, and Human Interface Devices (HID). The Live Update feature suits remote firmware update scenarios where field downtime is unacceptable. When designing with this device, place a 10 µF bulk + 0.1 µF decoupling pair adjacent to each VDD/VSS pair and follow Microchip's Explorer 16/32 Development Board reference layout for the TQFP-100 PIM socket. Plan Live Update memory partitioning during linker script design; each partition needs its own boot block and IVT. This page synthesizes distributor pricing, drop-in alternative MPNs from Microchip's PIC24FJ family, USB OTG design notes, and selection guidance not found in the manufacturer datasheet.

견적 요청 문의하기

PIC24FJ512GB610T-I/BG

PIC24FJ512GB610T-I/BG - 16-Bit 32MHz MCU, 512KB Flash | Microchip

The Microchip Technology PIC24FJ512GB610T-I/BG is a 16-bit RISC microcontroller built on the PIC24 CPU core, delivering up to 32 MHz (16 MIPS) performance, 512 KB of Flash program memory, and 32 KB of on-chip SRAM in a 121-ball TFBGA package measuring 10x10 mm. The device integrates a USB 2.0 On-The-Go peripheral alongside a rich set of analog and digital interfaces targeting USB-embedded, graphical, and connectivity-oriented applications. What is a 16-bit microcontroller? A 16-bit microcontroller is a programmable computing device that operates on 16-bit-wide data paths, instruction words, and registers, sitting between 8-bit MCUs (limited math and addressing) and 32-bit MCUs (higher cost, complexity, and power). The PIC24FJ family is Microchip's broad mid-range 16-bit portfolio running at up to 16 MIPS, suitable for applications that need more headroom than 8-bit PIC MCUs but do not require the cost of an ARM Cortex-M part. Key differentiating features include an integrated USB 2.0 OTG controller (a hallmark of the GB610 sub-family), a 10/100 Ethernet MAC (some GB610 variants), a Parallel Master Port (PMP) for graphics or external memory, and CTMU/ICSP support. The 512 KB Flash (170K x 24 instruction words) is the largest in the GB610 family, doubling typical GB-series memory. The 121-ball TFBGA exposes most peripherals to support high-pin-count designs while keeping board area small. The PIC24FJ512GB610T-I/BG uses a modified Harvard architecture with a 16-bit wide data path, 24-bit instruction word, and a 17 x 17 hardware multiplier. Peripherals include 7 timers, 6 PWM channels, 8 DMA channels, 6 UART, 3 SPI, and 3 I2C modules. The 'T' suffix denotes tape-and-reel packaging, and the 'I' indicates the -40C to +85C industrial temperature range. Typical applications include USB peripherals (Human Interface Devices such as keyboards, mice, and game controllers), embedded graphics terminals using PMP-driven LCDs, industrial control with Ethernet connectivity, point-of-sale terminals, and data loggers. The USB OTG, large Flash, and rich communication peripherals make this MCU well-suited to systems that need to act as both a USB device and host. When designing with this MCU, pay close attention to the BGA layout - the 0.8 mm pitch requires HDI PCB fabrication and via-in-pad escape. Decoupling should follow Microchip's PIC24F reference design: 100 nF + 4.7 uF ceramic per VDD/VUSB pin group. Configure the internal FRC at 8 MHz and use the PLL to reach 32 MHz only if USB accuracy is required. This page synthesizes distributor pricing, same-brand drop-in alternatives (PIC24FJ1024GB610 family, PIC24FJ256GB610 family), and practical BGA layout notes that go beyond the manufacturer datasheet summary.

견적 요청 문의하기

PIC24FJ512GB610T-I/PT

PIC24FJ512GB610T-I/PT - 16-bit 512KB Flash USB MCU | Microchip

The Microchip Technology PIC24FJ512GB610T-I/PT is a 16-bit PIC24F microcontroller built on a low-power CMOS architecture, integrating 512 KB of Flash program memory and 32 KB of SRAM in a 100-pin TQFP (12x12 mm) package. The device operates up to 32 MHz delivering 16 MIPS, supports USB On-The-Go (OTG) with embedded PHY, dual-partition Flash for Live Update capability, and operates from a 2.0V to 3.6V supply (3.3V typical). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a rich set of peripherals. The PIC24F family sits in the 16-bit microcontroller hierarchy above 8-bit PIC MCUs and below 32-bit ARM Cortex-M parts, offering an attractive balance of code density, peripheral integration, and deterministic interrupt latency for embedded control. The 'FJ' variant adds Flash with dual-partition Live Update, which permits firmware field upgrades without external memory. Key features of the PIC24FJ512GB610 include 24-channel 12-bit ADC (with 10-bit mode option), 6 UART, 3 SPI, 3 I2C, 8 DMA channels, 6 PWM, 7 timers, CTMU for capacitive touch, configurable logic cells (CLC), and on-chip 3.3V regulator with deep-sleep current in the microamp range. This combination is tuned for human-interface, USB, and battery-powered applications. The architecture uses a 16-bit modified Harvard core with hardware multiply/divide, 24-bit instruction word for compact code, and a peripheral bus that allows DMA to service data movement without CPU intervention. Live Update uses two Flash partitions so a new firmware image can be programmed into the inactive partition while the active partition continues running, then the device swaps partitions atomically. Typical applications include USB peripherals (HID, CDC, mass storage), portable medical/fitness devices, industrial HMI, low-power sensor hubs, and battery-powered data loggers. The wide peripheral set and large RAM suit multi-protocol gateways. When designing with this part, allocate at least 4 KB of Flash for the USB stack and bootloader, use the internal 3.3V LDO mode to reduce BOM, and respect the 100-pin TQFP thermal pad layout guidelines to keep junction temperature within range at industrial ambient. This page consolidates distributor pricing, drop-in alternatives (same-brand same-family preferred), pinout, and design notes not found in the manufacturer datasheet.

견적 요청 문의하기

PIC24FJ512GL405-E/M4

PIC24FJ512GL405-E/M4 - 512KB Flash 32MHz USB LCD MCU | Microchip

The Microchip Technology PIC24FJ512GL405-E/M4 is a 16-bit eXtreme Low-Power microcontroller from the PIC24FJ GL4/GU4 family, featuring 512KB of Dual Partition Flash supporting real-time Over-The-Air (OTA) updates and EEPROM emulation, 32KB RAM, integrated full-speed USB, an LCD controller, and 39 general-purpose I/O pins in a 48-pin UQFN (6x6 mm) package. The -E temperature suffix denotes the -40C to +125C extended industrial/automotive-grade operating range, and the AEC-Q100 qualification makes this variant suitable for safety-critical automotive environments. What is a 16-bit MCU? A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and digital/analog peripherals. The 16-bit modified-Harvard architecture used in the PIC24FJ family executes up to 16 MIPS at 32 MHz, sits between 8-bit MCUs (lower cost, slower math) and 32-bit ARM Cortex-M parts (higher performance, more RAM). The 'FJ' lineage is Microchip's eXtreme Low-Power family, optimized for battery-powered and always-on applications, with sleep currents in the microampere range and rapid wake-up from multiple Core Independent Peripherals (CIPs).\n Key features of the PIC24FJ512GL405 include 512KB Flash with ECC (256KB ECC Flash per Mouser listing), 32KB RAM, full-speed USB 2.0 device/host/OTG, an LCD driver capable of driving segment displays, multiple CIPs that offload tasks from the CPU, and a 17-bit x 17-bit single-cycle hardware multiplier for DSP-style operations. The 2.0V to 3.6V operating voltage and integrated DMA controllers reduce CPU overhead for peripheral data movement. Dual Partition Flash is a distinguishing architectural feature of this family: two independent Flash arrays allow firmware to be updated in one partition while executing from the other, enabling fail-safe OTA updates without external memory. The hardware multiplier and DSP instructions (single-cycle MAC operations) provide deterministic signal-processing throughput, while dedicated CIPs (CRC, PWM, RTCC, ADC, comparators) execute independently of the CPU core. Typical applications include IoT edge nodes requiring OTA firmware updates, automotive body and HMI controllers with LCD segment displays, USB-connected industrial sensors, medical devices needing low sleep current, and battery-powered wearables with always-on sensing. The integrated USB eliminates the need for an external transceiver for HID, CDC, or vendor-class device designs. When designing with this part, allocate careful attention to the 48-pin UQFN layout: the exposed pad must be soldered for thermal and electrical performance, and the dual-partition OTA bootloader should be planned before final Flash sizing. JTAG/ICSP pins must remain accessible in the layout for production programming. This page synthesizes distributor pricing, AEC-Q100-qualified cross-references within the GL4/GU4 family, and practical design notes that complement the manufacturer datasheet for embedded engineers.

견적 요청 문의하기

PIC24FJ512GL405-E/PT

PIC24FJ512GL405-E/PT - 16-Bit MCU 512KB Flash USB LCD 48-TQFP | Microchip

The Microchip Technology PIC24FJ512GL405-E/PT is a 16-bit eXtreme Low-Power microcontroller IC featuring a 32 MHz (16 MIPS) CPU core, 512 KB of Dual-Partition Flash supporting Over-The-Air (OTA) updates and EEPROM emulation, and 32 KB RAM, housed in a 48-pin TQFP (7x7 mm) package. What is a PIC24F Microcontroller? The PIC24F family is a 16-bit modified Harvard architecture microcontroller from Microchip Technology, sitting between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX/dsPIC families in Microchip's product hierarchy. Within that hierarchy, the PIC24FJ 'GU4/GL4' sub-family targets ultra-low-power applications with rich peripherals such as LCD controllers and full-speed USB. As a 'GL4' device, the PIC24FJ512GL405 includes a segmented LCD driver and USB on-chip, making it a member of the PIC24F > PIC microcontroller > microcontroller > semiconductor taxonomy. Key differentiating features of the PIC24FJ512GL405 include Dual Partition Flash (DPF) for live firmware updates, a 16 MIPS CPU core running from internal oscillators, 39 general-purpose I/O pins, an integrated segmented LCD controller, full-speed USB 2.0 (12 Mbps), core-independent peripherals (CIPs) including timers, capture/compare, DMA and a 10-bit ADC, and an extended temperature grade (-40C to +125C, denoted by the 'E' suffix). The 48-TQFP package provides 7x7 mm board footprint with 0.5 mm pitch for easy hand or reflow soldering. Technically, the device uses a 3.3 V supply with a wide 2.0 V to 3.6 V operating range, internal 8 MHz Fast RC and 31 kHz Low-Power RC oscillators with PLL, and multiple low-power modes (Sleep, Idle, Doze) supporting eXtreme Low-Power (XLP) battery designs. The dual-partition flash can be partitioned as 256K+256K for A/B boot-loading or operated as a single 512 KB block, with up to 100K erase/write cycles per partition. Typical applications include battery-powered human-machine interface (HMI) panels with LCD readouts, USB-connected IoT sensor nodes requiring OTA firmware updates, medical portable monitors with USB data logging, industrial control displays with on-board diagnostics, and consumer wearables that demand ultra-low standby power. When designing with this device, allocate at least one of the dual flash partitions to a bootloader to take advantage of fail-safe OTA updates, and use Microchip's MPLAB X IDE with the XC16 compiler plus the MPLAB Code Configurator (MCC) for rapid peripheral setup. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design guidance not found in the manufacturer datasheet.

견적 요청 문의하기

PIC24FJ512GL405-I/M4

PIC24FJ512GL405-I/M4 - 512KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24FJ512GL405-I/M4 is a 16-bit PIC24F eXtreme Low-Power microcontroller (MCU) IC delivering 16 MIPS at 32 MHz, integrating 512 KB of Dual Partition Flash (ECC 256 KB), 32 KB SRAM, a full-speed USB 2.0 transceiver, and a segmented LCD controller in a 48-pin UQFN (M4) 6×6 mm package. Operating from 2.0 V to 3.6 V across an industrial -40 °C to +85 °C range, it is targeted at human-machine interfaces, USB-CDC sensor nodes, and secure OTA-capable edge devices. A microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of on-chip peripherals such as timers, ADC, communication controllers, and GPIOs. Within the broader taxonomy, the PIC24FJ512GL405 belongs to the 16-bit MCU tier, positioned above 8-bit AVR/PIC16 parts and below 32-bit Cortex-M/Arm parts. It is optimized for low-power, mixed-signal embedded designs where deterministic interrupt response and rich CIPs (Core Independent Peripherals) reduce CPU load. Key features include hardware crypto (AES, SHA) and true RNG for secure boot, dual-partition Flash enabling live OTA firmware swap with zero downtime, an integrated segmented LCD driver up to 488 segments, USB 2.0 full-speed with on-chip transceiver, and Microchip's eXtreme Low-Power (XLP) technology that drops run current to under 1 µA in deep sleep. Twelve CIPs run autonomously from the CPU, allowing event-driven designs with minimal firmware overhead. The architecture is a Modified Harvard 16-bit core with hardware multiply/divide, a 24-bit instruction word, and a 32 KB RAM with DMA. Its on-chip peripherals include multiple UART/SPI/I2C, 12-bit ADC, comparators, PWM, RTCC, and a charge time measurement unit (CTMU). The Dual Partition Flash layout lets one partition run while the other is reprogrammed, then boot-swap for rollback-safe OTA. Typical applications include secure IoT edge nodes with OTA firmware update, USB-CDC medical and industrial instrumentation, segment-LCD thermostats and metering HMIs, low-power wireless sensor hubs, and battery-backed home automation panels. The 48-UQFN footprint suits space-constrained PCBs. When designing, allocate the USB D+/D- traces as a 90 Ω differential pair and place the 48-UQFN exposed pad on a continuous ground pour for thermal and EMI performance. Verify OTP lock bits and Flash partition configuration in MPLAB X IDE before production signing. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기

PIC24FJ512GL406-E/MR

PIC24FJ512GL406-E/MR - 16-bit 32MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC24FJ512GL406-E/MR is a 16-bit eXtreme Low-Power microcontroller with 512KB dual-partition Flash, 32KB RAM, full-speed USB, and an integrated segmented LCD controller, packaged in a 64-pin QFN (9x9 mm) with extended-temperature -40C to +125C rating. According to the manufacturer datasheet, the device operates at up to 32 MHz (16 MIPS) and is part of the PIC24FJ GL4/GU4 family supporting real-time Over-The-Air (OTA) updates and EEPROM emulation through dual-partition Flash memory architecture. An MCU (microcontroller unit) is a single-chip computer containing a processor core, program memory, RAM, and peripheral interfaces, designed for embedded control applications. Within the broader category hierarchy, a microcontroller falls under integrated circuits -> microcontrollers -> 16-bit microcontrollers -> PIC24F family, where PIC24F denotes Microchip's 16-bit Flash MCU platform optimized for low-power and mixed-signal applications with peripheral integration including USB and LCD drivers. Key features of the PIC24FJ512GL406-E/MR include 512KB of self-programmable Flash with dual-partition OTA support, 32KB SRAM, hardware ECC, integrated full-speed USB 2.0 device/host/OTG, integrated segmented LCD driver (up to 60 segments), multiple Core Independent Peripherals (CIPs) including configurable logic cells and numerically controlled oscillator, and a 12-bit A/D converter with up to 16 channels. The 16-bit Modified Harvard architecture delivers 16 MIPS while consuming as little as 150 uA/MHz active current. Architecturally, the device uses a 16-bit modified Harvard CPU with a 24-bit instruction word, dual-partition Flash allowing simultaneous execution from one partition while writing to the other, and a peripheral pin select (PPS) system that maps digital functions to user-selected pins, simplifying PCB layout. The hardware ECC engine detects and corrects single-bit Flash errors, supporting safety-critical and automotive-style reliability profiles. Typical applications include IoT sensor nodes with USB diagnostics ports, human-machine interface (HMI) panels with LCD + USB, medical glucose meters and infusion pumps, smart energy metering with segmented LCD readouts, automotive body controllers and instrument clusters, and industrial HMI terminals where OTA firmware update capability, low-power sleep modes, and an integrated LCD driver reduce BOM cost and board area. When designing with this MCU, ensure VDD is decoupled with a 1uF plus 0.1uF pair within 5 mm of the package pins, route the 32 kHz secondary oscillator away from switching nodes, and budget at least 200 mA total USB VBUS inrush for peripheral-powered designs. Verify the 64-QFN (9x9) thermal pad is soldered to a continuous ground pour for adequate theta_JA under high-active-current loads. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24FJ family, and practical design notes not found in the standalone manufacturer datasheet, including ECC behavior, dual-partition OTA flow, and segmented LCD bias network sizing.

견적 요청 문의하기

PIC24FJ512GL406-E/PT

PIC24FJ512GL406-E/PT - 512KB Flash 16-bit USB LCD MCU | Microchip

The Microchip Technology PIC24FJ512GL406-E/PT is a 16-bit eXtreme Low-Power microcontroller in the PIC24FJ GL4 family, featuring 512 KB of ECC Flash, 32 KB SRAM, integrated full-speed USB, and an integrated LCD controller, housed in a 64-pin TQFP (10x10 mm) package. It executes instructions at up to 32 MHz (16 MIPS) from its modified Harvard architecture, and the -E suffix denotes the extended (-40C to +125C) industrial operating temperature range. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), working memory (RAM), and a rich set of on-chip peripherals. The 16-bit PIC24F core sits in the hierarchy: microcontroller -> embedded MCU -> 16-bit MCU -> PIC24F family -> GL4 sub-family. Microcontrollers dominate embedded design because they consolidate computation, control, and connectivity into one low-power, deterministic device. Key features of this part include 512 KB of dual-partition Flash that supports real-time Over-The-Air (OTA) firmware updates and EEPROM emulation, a segmented LCD driver with charge pump, USB 2.0 full-speed (12 Mbps) with on-chip transceiver, and Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLC), Multiple Capture/Compare/PWM, and a 32-bit Real-Time Clock. Five 16-bit timers/counters, a 12-bit A/D converter with up to 32 channels, and multiple serial interfaces (UART, SPI, I2C) round out the peripheral set. Architecturally, the PIC24FJ GL4 devices use a 16-bit modified Harvard core with a 24-bit instruction word, supporting C-compiled code with deterministic interrupt response. The dual-partition Flash and live-update firmware make this family tailored for connected, field-upgradable products. The integrated LCD controller with on-chip charge pump eliminates external bias components. Typical applications include low-power IoT sensor nodes with USB diagnostics, human-machine interface (HMI) panels with segmented LCDs, USB-connected medical monitors, industrial control panels, and remote sensor endpoints requiring OTA firmware updates. The wide temperature range and rich analog make it well suited to factory automation and battery-powered field instruments. When designing with this device, plan the dual-partition Flash layout before firmware development so the bootloader and golden image boundaries are reserved. Decouple AVDD/AVSS separately from VDDCORE, and use the on-chip charge pump only after confirming the LCD glass load and segment count are within the controller's drive capability. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design considerations not typically consolidated in the manufacturer datasheet.

견적 요청 문의하기

PIC24FJ512GL406-I/MR

PIC24FJ512GL406-I/MR - 16-bit 512KB Flash USB/LCD MCU | Microchip

The Microchip Technology PIC24FJ512GL406-I/MR is a 16-bit eXtreme Low-Power microcontroller IC running at 32 MHz (16 MIPS) with 512 KB of dual-partition Flash and 32 KB SRAM, integrated full-speed USB 2.0 and segment-LCD controller, housed in a 64-pin QFN (MR) 9x9 mm package. It is part of the PIC24FJ GU4/GL4 family that supports Over-The-Air (OTA) updates and EEPROM emulation. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and a rich set of peripheral interfaces (UART, SPI, I2C, USB, ADC, timers, LCD drivers). The 16-bit PIC24F architecture sits in Microchip's product hierarchy above PIC16 (8-bit) and below the 32-bit PIC32MX/dsPIC33 families, offering higher code density and arithmetic throughput than 8-bit cores while retaining the deterministic interrupt behaviour of PIC microcontrollers. eXtreme Low-Power (XLP) variants extend battery life into the multi-year range through deep sleep currents measured in nanoamps and multiple power-saving modes. Key features include Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLC), Multiple Output Capture/Compare/PWM (SCCP/MCCP), and a 12-bit 200 ksps ADC. The 8-bit PMP bus supports graphics and external memory expansion, while the integrated segmented LCD driver can directly drive up to 512 segments without external charge-pump circuitry. Hardware crypto (AES, DES, SHA) and a true random-number generator (SIP) provide secure connectivity for IoT endpoints. Typical applications span battery-powered IoT sensors with USB-C charging, secure medical wearables that demand long battery life, industrial HMI panels with integrated LCD, and home-automation bridges requiring OTA firmware updates. The 512 KB dual-partition Flash enables fail-safe bootloader implementations where one bank always remains bootable while the other is being reflashed. Designers should plan for a 2.5 V-3.6 V VDD core supply with a separate AVDD/AVSS pair for the ADC, route the 32 MHz crystal traces symmetrically with short return paths, and consult the family's AN now Flash programming application note for OTA dual-bank sequencing. Compared with discrete 8-bit MCUs plus external LCD/USB bridges, this part reduces BOM count, PCB area, and quiescent current by an order of magnitude.

견적 요청 문의하기

PIC24FJ512GL406-I/PT

PIC24FJ512GL406-I/PT - 16-bit 32MHz 512KB Flash MCU w/ USB & LCD | Microchip

The Microchip PIC24FJ512GL406-I/PT is a 16-bit eXtreme Low-Power microcontroller from the PIC24FJ GU4/GL4 family, delivering 16 MIPS at 32 MHz with 512 KB of ECC Flash, 32 KB RAM, and an integrated segmented LCD controller plus full-speed USB 2.0 in a 64-pin TQFP (PT) 10x10 mm package. It is qualified for industrial temperature range (-40C to +85C) and built on a wide 2.0V to 3.6V VDD operating window that lets the same hardware run from a single Li-ion cell or two alkaline cells. A microcontroller (MCU) is a single-chip computer integrating a CPU core, non-volatile program memory (Flash/ROM), volatile working memory (RAM), and a rich set of peripherals on one die. The PIC24FJ family sits in Microchip's 16-bit MCU hierarchy - 16-bit MCU -> general-purpose MCU -> embedded controller -> semiconductor - and uses a modified Harvard architecture where code and data paths are separated for predictable interrupt latency and deterministic execution. Key features of the PIC24FJ512GL406 include Dual Partition Flash supporting real-time Over-The-Air (OTA) firmware updates and EEPROM emulation, a 16-channel 10/12-bit ADC, multiple UART/SPI/I2C interfaces, a hardware Real-Time Clock and Calendar (RTCC), and Core Independent Peripherals (CIPs) such as Configurable Logic Cells, PWM, and CRC that offload tasks from the CPU. The segmented LCD driver can drive up to 512 pixels, removing the need for an external LCD controller in low-power HMI designs. Typical applications include industrial control panels, smart energy meters, home appliances with LCD UIs, USB peripherals, medical handheld instruments, and IoT edge nodes. The integrated USB 2.0 Full-Speed OTG controller is particularly valuable for devices that must enumerate as a CDC/HID/MSD device without an external bridge chip. Design trade-off: the PIC24FJ512GL406 trades raw CPU throughput for ultra-low power - active current is roughly 8 mA at 32 MHz, while sleep current drops to the microamp range. Route the VDD/VSS/VBAT pins with wide traces, place decoupling capacitors within 5 mm of each VDD pin, and keep the analog AVSS/AVDD pair isolated from noisy digital returns for clean ADC readings.

견적 요청 문의하기

PIC24FJ512GL406T-I/MR

PIC24FJ512GL406T-I/MR - 16-bit 512KB Flash MCU w/ USB & LCD | Microchip

The Microchip Technology PIC24FJ512GL406T-I/MR is a 16-bit PIC microcontroller from the PIC24FJ GL4 family, featuring 512KB of Dual Partition Flash, 32KB RAM, full-speed USB, and an integrated segmented LCD controller, housed in a 64-pin QFN (9x9 mm) package with tape-and-reel packaging (suffix -T). A 16-bit microcontroller (MCU) is a microprocessor-oriented IC that combines a CPU core, program memory (Flash), data memory (RAM), and a rich set of on-chip peripherals on a single die. PIC24F devices use a modified Harvard architecture with a 16-bit data path, targeting low-power, mixed-signal embedded applications. In the broader taxonomy, the PIC24FJ GL4 family belongs to: microcontroller -> 16-bit MCU -> PIC24F family -> microchip PIC24FJ GL4 sub-family -> semiconductor. PIC24FJ parts are eXtreme Low-Power (XLP) variants designed for battery-friendly designs with deep-sleep currents down to nanoampere levels. Key specifications include 512KB (512K x 8) Flash with dual-partition OTA-update support, 32KB RAM, 16 MIPS performance at 32 MHz CPU clock, and an operating voltage range of 2.0V to 3.6V. The integrated peripherals include a full-speed USB 2.0 device, an LCD controller supporting up to 384 segments, a 12-bit A/D converter (ADC) with up to 16 channels, multiple UART/SPI/I2C interfaces, and Core Independent Peripherals (CIPs) such as Configurable Logic Cells and 32-bit timers for offloading tasks from the CPU. The PIC24FJ GL4 architecture implements a Dual Partition Flash scheme that allows one partition to run active code while the other receives a new image via OTA updates, enabling field firmware upgrades without service interruption. The XLP technology integrates multiple power-saving modes (Idle, Sleep, Deep Sleep) with selective peripheral clock gating. Hardware ECC on Flash improves reliability for safety-sensitive code. Typical applications include USB-connected Human Interface Devices (HIDs), e-metering and smart energy displays, portable medical devices with LCD readouts, industrial control panels with segmented LCDs, and consumer appliances requiring low-power battery operation with rich peripheral integration. A key design consideration is operating-voltage headroom: at 3.3V nominal, the regulated core supports up to 32 MHz operation, while 2.0V operation reduces maximum CPU frequency. The 64-QFN exposed-pad requires proper thermal vias under the EP for power dissipation; non-recovered Flash write cycles from interrupted OTA updates can brick the device, so dual-partition firmware architecture and a robust bootloader are recommended. This page consolidates distributor pricing, drop-in alternative listings (PIC24FJ512GL406-I/PT, PIC24FJ256GL406T-I/PT, PIC24FJ128GL406-I/PT), and practical design notes not collected on any single distributor page.

견적 요청 문의하기

PIC24FJ512GL406T-I/PT

PIC24FJ512GL406T-I/PT - 16-bit 32MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC24FJ512GL406T-I/PT is a 16-bit eXtreme Low-Power microcontroller (MCU) from the PIC24FJ GL4 family, operating at up to 32 MHz (16 MIPS) with 512 KB of dual-partition Flash memory supporting Over-The-Air (OTA) updates and EEPROM emulation, 32 KB of ECC-capable SRAM, and integrated LCD segment driver, USB Full-Speed, and a rich set of Core Independent Peripherals (CIPs), packaged in a 64-pin TQFP (10x10 mm). What is a PIC24FJ MCU? The PIC24FJ is a 16-bit modified Harvard RISC microcontroller family from Microchip Technology in the broader category of 16-bit microcontrollers -> flash microcontrollers -> embedded microcontrollers -> semiconductor ICs. The 'F' suffix denotes Flash program memory, the 'J' denotes eXtreme Low-Power operation with deep-sleep modes drawing microamp-level currents, and 'GL4' places it in the LCD/USB-equipped low-power segment designed for human-machine interface (HMI), medical, and industrial sensor applications. Key features include a 32 MHz CPU with hardware multiply/divide, 24-channel 10-bit ADC, multiple UART/SPI/I2C peripherals, RTCC with calendar mode, 4 DMA channels, and Configurable Logic Cells (CLC) and peripheral trigger generators. The dual-partition flash enables live firmware updates without downtime, while ECC on SRAM/Flash and a hardware crypto engine support robust secure-boot designs. The integrated LCD controller can drive up to 240 segments directly, eliminating external driver ICs in many HMI designs. Typical applications include handheld industrial instruments with LCD readouts, USB-connected data loggers, IoT edge sensors with OTA update capability, battery-powered medical monitoring devices, and automotive AEC-Q100 human-machine interface clusters. The 64-pin TQFP package offers generous I/O count for systems that need simultaneous USB, multiple serial buses, and parallel segment LCD. When designing with this part, plan flash partitioning for OTA safety and budget CPU cycles against the 16 MIPS sustained throughput; for USB designs, account for the 48 MHz USB clock domain separately from the 32 MHz system clock. Decouple all VDD/AVDD pairs and follow Microchip's TB3070 PCB layout guidelines for the USB data-line impedance.

견적 요청 문의하기

PIC24FJ512GL408-E/PT

PIC24FJ512GL408-E/PT - 16-bit MCU 512KB Flash LCD USB TQFP-80

The Microchip Technology PIC24FJ512GL408-E/PT is a 16-bit microcontroller from the PIC24F 'GU4/GL4' family, featuring 512KB of Dual Partition Flash with ECC support, 32KB RAM, and integrated LCD driver, housed in an 80-pin TQFP package (12x12 mm). It runs up to 16 MIPS at 32 MHz and includes a full-speed USB 2.0 device/host/OTG controller, making it suitable for embedded applications requiring both display output and USB connectivity. A 16-bit microcontroller (MCU) is a microprocessor that processes data 16 bits at a time, sitting between 8-bit MCUs and 32-bit MCUs in the embedded hierarchy. Within that hierarchy, the PIC24F belongs to Microchip's PIC24 family -> 16-bit MCU class -> microcontroller -> embedded processor -> semiconductor. The 'F' suffix denotes Flash program memory and CMOS process, while 'J' indicates the low-power eXtreme Low Power (XLP) technology platform. Dual Partition Flash enables live Over-The-Air (OTA) firmware updates by allowing one partition to run while the other is reprogrammed. Key features include 512KB ECC Flash (organized as Dual Partition for OTA updates), 32KB SRAM, integrated segmented LCD driver (typically up to 480 segments), 24-channel 10/12-bit ADC, 1x 10-bit DAC, Core Independent Peripherals (CIPs) such as CLC, MCCP, and PWM, full-speed USB 2.0 with OTG, and 4-bit PMP/EPMP. Operating voltage ranges from 2.0V to 3.6V with multiple low-power sleep modes and nanoWatt XLP technology for battery-sensitive designs. Architecturally, the PIC24FJ512GL408 uses a modified Harvard architecture with 24-bit instruction words and 16-bit data path. The device integrates hardware cryptographic support, JTAG programming/debug interface, and up to 69 I/O pins. The dual-partition Flash is critical for safety-critical and OTA-update designs where firmware cannot be interrupted during field upgrades. Typical applications include low-power human-machine interface (HMI) panels with integrated LCD, USB-connected industrial sensors and instrumentation, secure IoT edge nodes with OTA capability, medical point-of-care devices with display readouts, and consumer appliances with segmented LCD user interfaces. The wide operating temperature range (-40C to +125C) and integrated USB make it a strong fit for portable and field-deployed embedded designs. When designing with this device, choose the appropriate Flash partition scheme for OTA updates early in firmware planning. Decoupling capacitors near VDD/AVDD pins and proper USB D+/D- trace impedance (90 ohms differential) are essential for reliable USB operation. Always verify segment assignments against the specific LCD glass specifications in the datasheet's LCD chapter. This page synthesizes distributor pricing, drop-in alternative listings from the PIC24F family, and practical design notes not aggregated in the manufacturer datasheet alone.

견적 요청 문의하기

PIC24FJ512GL408-I/PT

PIC24FJ512GL408-I/PT - 512KB Flash 16-bit LCD MCU | Microchip

The Microchip Technology PIC24FJ512GL408-I/PT is a 16-bit microcontroller from the PIC24F family that integrates up to 512 KB of ECC Flash, 32 KB of SRAM, and an on-chip segmented LCD controller in an 80-pin TQFP (PT) 12x12 mm package. The part operates from 2.0V to 3.6V, runs the MIPS16e-enhanced PIC24 CPU core at 32 MHz (16 MIPS), and exposes 70 user I/O plus dedicated LCD segment pins. A 16-bit microcontroller (MCU) is a single-chip computer that uses a 16-bit data path, instruction word, and register file. Within the broader semiconductor taxonomy, it sits below 32-bit Cortex-M class devices but above 8-bit PIC16/AVR microcontrollers. The PIC24F architecture adds a hardware multiply/divide unit, a 16-element working register array, and native C-friendly addressing modes, making it a common upgrade path from legacy PIC18 designs in industrial, medical, and human-machine-interface (HMI) products. Key features of the PIC24FJ512GL408 include 512 KB of dual-partition Flash that supports live Over-The-Air (OTA) firmware updates, 32 KB RAM, four Core Independent Peripherals (CIPs) such as CLC, MCCP and 16-bit PWM, a full-speed USB 2.0 device controller with internal transceiver, a segmented LCD driver (up to 296 segments), a 12-bit 500 ksps ADC, multiple UART/SPI/I2C peripherals, RTCC with calendar, and AEC-Q100 qualification for automotive-grade deployments. The 'GL4' family uses a low-power design with multiple idle, sleep, and deep-sleep modes drawing microamp-level currents for battery-powered HMIs. Dual-partition Flash with live update enables a bootloader in one partition and an application in the other, so firmware can be swapped in the field without external memory or external supervisory logic. Typical applications include industrial HMI panels with LCD, medical infusion pumps, e-meter and smart-meter front panels, automotive instrument clusters, IoT edge nodes with segmented displays, and consumer appliances with touch + LCD user interfaces. Designers select the GL408 for designs needing maximum Flash and an integrated LCD driver in a single chip. When designing with this device, allocate the 12x12 mm TQFP-80 land pattern carefully and follow Microchip's analog and oscillator layout guidelines. Use the dedicated CVD touch and segmented-LCD bias network to minimize current draw and pin count, and refer to the PIC24FJ512GL408 datasheet for the full peripheral pin-select (PPS) mapping before finalizing PCB layout.

견적 요청 문의하기

PIC24FJ512GL408T-I/PT

PIC24FJ512GL408T-I/PT - 16-bit 32MHz 512KB Flash MCU 80-TQFP

The Microchip Technology PIC24FJ512GL408T-I/PT is a 16-bit microcontroller from the PIC24F family, featuring a 32MHz CPU with 16 MIPS performance, 512KB of dual-partition ECC Flash (supporting OTA updates and EEPROM emulation), 32KB SRAM, and an integrated segment LCD controller, all housed in an 80-pin TQFP (12x12mm) package. It provides 70 general-purpose I/O pins and operates from a 2.0V to 3.6V supply voltage. The GL408 sub-family includes a full-speed USB 2.0 controller and a rich set of Core Independent Peripherals (CIPs), making it well-suited for connected embedded designs. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), data memory (SRAM), and peripheral interfaces into a single chip. Within the broader taxonomy, PIC24F MCUs belong to the 16-bit microcontroller category, which sits between 8-bit MCUs (e.g., PIC16, ATmega) and 32-bit MCUs (e.g., PIC32, STM32). They are widely deployed in industrial, consumer, and IoT applications where moderate computational throughput, low power, and rich analog/mixed-signal peripherals are required. Key differentiating features include hardware ECC on Flash memory for improved reliability, dual-partition Flash enabling live OTA firmware updates without downtime, segmented LCD driver capable of up to 472 segments, and an integrated USB 2.0 Full-Speed controller. The CPU features a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, executing most instructions in one cycle. The CIPs ecosystem includes configurable logic cells, multiple timers, ADC, comparators, and PWM outputs that operate independently of the CPU. Typical applications for this device span industrial HMI panels, USB-connected embedded peripherals, IoT edge nodes with OTA capability, medical instruments, automotive telematics (non-AEC-Q100 variants only), and consumer white goods with LCD user interfaces. Its dual-partition Flash plus USB combination is particularly attractive for designs requiring secure field firmware upgrades via USB or wireless backhaul. When designing with this part, allocate sufficient decoupling (100nF + bulk 4.7uF near VDD/AVDD pins) and follow Microchip's TQFP-80 land pattern recommendations. Ensure the TQFP thermal pad (if present in your layout) is properly soldered for improved power dissipation under full USB and LCD drive loads. This page synthesizes distributor pricing, pin-to-pin drop-in alternatives within the PIC24FJ family, and practical PCB design notes not collected in the manufacturer datasheet alone, offering a one-stop engineering summary.

견적 요청 문의하기

PIC24FJ512GL410-E/PT

PIC24FJ512GL410-E/PT - 16-bit 32MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC24FJ512GL410-E/PT is a 16-bit PIC microcontroller from the PIC24F "GL4" eXtreme Low-Power family, operating at up to 32 MHz with 16 MIPS performance, integrating 512 KB of dual-partition ECC Flash plus 32 KB RAM, and housed in a 100-pin TQFP (12x12 mm) package. The "E" suffix designates the extended industrial temperature grade (-40°C to +125°C) and the "/PT" suffix identifies the 100-pin TQFP package with matte-tin lead finish. According to Microchip product family documentation, the GL4 sub-family supports real-time Over-The-Air (OTA) updates via its dual-partition Flash and provides EEPROM emulation, a key feature for field-updatable secure applications. A 16-bit microcontroller (MCU) is a microprocessor that uses a 16-bit data path, 16-bit registers, and a 16-bit ALU, offering higher computational throughput than 8-bit parts while consuming less power than typical 32-bit Cortex-M devices. Within Microchip's portfolio, the PIC24F family sits in the hierarchy: MCU -> 16-bit MCU -> PIC24 -> PIC24F (low-power) -> PIC24FJ (Flash with enhanced peripherals) -> PIC24FJ512GL410 (high-memory GL4 sub-family). This taxonomy places the part firmly in the embedded control segment for battery-powered and always-on applications. Key differentiating features include a full-speed USB 2.0 device/host/OTG interface, a segment LCD controller with up to 512 segments, multiple Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLC), Peripheral Trigger Generator (PTG), 32-bit CRC, and JTAG programming/debug. The dual-partition Flash enables live firmware updates without service interruption, a critical feature for IoT devices, medical monitors, and connected industrial sensors that must remain operational during OTA operations. The GL4 family also integrates a hardware crypto engine supporting AES, DES, and 3DES acceleration alongside a true random number generator (RNG), allowing secure boot and encrypted OTA payloads. Architecturally, the PIC24FJ512GL410 uses a modified Harvard architecture with a 24-bit instruction word and 16-bit data path, supported by a 7-channel DMA controller that offloads data movement from the CPU. The 32 MHz maximum clock derives from an internal 8 MHz FRC oscillator with PLL multiplication, eliminating an external crystal in many designs and reducing BOM cost. The wide 2.0V-3.6V operating range (per the JLCPCB summary of Microchip specifications) supports direct lithium-battery or regulated 3.3V supply rails. Ten ADC inputs feature a 10-bit 1.1 Msps successive-approximation converter with multiple trigger sources including PWM and timer events. Typical applications include battery-powered IoT sensor nodes with segment LCD displays, secure medical glucose or infusion monitors, industrial flow meters and process controllers, USB-connected data loggers, and home appliance user-interface panels. The integrated LCD driver eliminates an external segment-LCD controller, saving PCB area and cost in human-machine interface designs. Designers should ensure that the chosen supply rail maintains 2.0V-3.6V under all load transients, and that unused TQFP-100 pins are configured as outputs or inputs with internal pull-ups to minimize current leakage. This page combines distributor pricing, drop-in alternative MPNs from Microchip's PIC24FJ family, and design considerations that go beyond the bare datasheet.

견적 요청 문의하기

하위 카테고리

제품 (32832)

PIC24FJ512GA606-I/PT - 16-bit 32MHz MCU, 512KB Flash, 64-TQFP

PIC24FJ512GA610-E/PT - 32MHz 16-Bit MCU 512KB Flash | Microchip

PIC24FJ512GA610T-I/BG - 32MHz 16-bit MCU 512KB Flash | Microchip

PIC24FJ512GA610T-I/PT - 16-Bit 32MHz 512KB Flash MCU | Microchip

PIC24FJ512GB606-E/PT - 16-bit XLP MCU 512KB Flash USB 64-TQFP | Microchip

PIC24FJ512GB606T-I/MR - 16-Bit 32MHz 512KB Flash USB MCU | Microchip

PIC24FJ512GB606T-I/PT - 512KB Flash 32MHz USB-OTG MCU TQFP-64 | Microchip

PIC24FJ512GB610-E/PT - 16-Bit 32MHz MCU, 512KB Flash | Microchip

PIC24FJ512GB610-I/PT - 16-Bit 32MHz MCU, 512KB Flash, USB | Microchip

PIC24FJ512GB610T-I/BG - 16-Bit 32MHz MCU, 512KB Flash | Microchip

PIC24FJ512GB610T-I/PT - 16-bit 512KB Flash USB MCU | Microchip

PIC24FJ512GL405-E/M4 - 512KB Flash 32MHz USB LCD MCU | Microchip

PIC24FJ512GL405-E/PT - 16-Bit MCU 512KB Flash USB LCD 48-TQFP | Microchip

PIC24FJ512GL405-I/M4 - 512KB Flash 16-bit MCU | Microchip

PIC24FJ512GL406-E/MR - 16-bit 32MHz 512KB Flash MCU | Microchip

PIC24FJ512GL406-E/PT - 512KB Flash 16-bit USB LCD MCU | Microchip

PIC24FJ512GL406-I/MR - 16-bit 512KB Flash USB/LCD MCU | Microchip

PIC24FJ512GL406-I/PT - 16-bit 32MHz 512KB Flash MCU w/ USB & LCD | Microchip

PIC24FJ512GL406T-I/MR - 16-bit 512KB Flash MCU w/ USB & LCD | Microchip

PIC24FJ512GL406T-I/PT - 16-bit 32MHz 512KB Flash MCU | Microchip

PIC24FJ512GL408-E/PT - 16-bit MCU 512KB Flash LCD USB TQFP-80

PIC24FJ512GL408-I/PT - 512KB Flash 16-bit LCD MCU | Microchip

PIC24FJ512GL408T-I/PT - 16-bit 32MHz 512KB Flash MCU 80-TQFP

PIC24FJ512GL410-E/PT - 16-bit 32MHz 512KB Flash MCU | Microchip