ADS4129IRGZ25
ADS4129IRGZ25 - 12-Bit 250MSPS Ultra-Low-Power ADC | Texas Instruments
The Texas Instruments ADS4129IRGZ25 is a 12-bit, 250-MSPS, ultra-low-power analog-to-digital converter (ADC) with one pipelined input channel, housed in a 48-pin VQFN (RGZ) package measuring 7x7 mm. It uses a proprietary architecture to achieve 250 MSPS sampling with substantially lower power consumption than conventional pipelined ADCs, and it operates from a 1.8 V analog and 1.8 V/3.3 V digital supply. The part belongs to TI's ADS414x/2x ADC family, sharing pinout and core IP with the 14-bit ADS4149, 12-bit ADS4128/4129, and lower-speed ADS4142/4122 variants.
An analog-to-digital converter (ADC) is a semiconductor device that converts continuous-time analog signals into discrete digital codes for downstream processing by FPGAs, DSPs, microcontrollers, or ASICs. The pipelined ADC architecture the ADS4129IRGZ25 uses breaks the conversion into multiple low-resolution stages, each driving a residue that is amplified and quantized by the next stage. Pipelined ADCs sit in the hierarchy: pipelined ADC -> successive-approximation (SAR) and flash alternatives -> data converter -> signal chain IC -> semiconductor. They are the dominant architecture for sample rates from 50 MSPS to 500 MSPS, where SAR converters are too slow and flash converters consume excessive power.
Key features of the ADS4129IRGZ25 include 12-bit resolution, 250 MSPS maximum sampling rate, LVDS-based DDR (double data rate) or CMOS digital output interfaces, integrated internal reference (with the option to drive an external reference), programmable analog input full-scale range, and a serial control interface (SPI) for register configuration. The device supports both single-ended and differential analog inputs, with input bandwidth typically exceeding 700 MHz. Power consumption scales with sample rate, allowing designers to trade speed for power in the same hardware.
Typical applications include high-speed instrumentation, communications test equipment, cable-headend downstream receivers, software-defined radio (SDR), radar signal processing front ends, medical imaging front ends (ultrasound beamforming), and industrial high-speed data acquisition. The combination of 250 MSPS, 12 bits, low power, and small 7x7 mm package makes it well suited to size-constrained, thermally limited designs.
When designing with the ADS4129IRGZ25, ensure the analog input network uses a properly terminated, bandwidth-matched differential transformer or differential amplifier - poor input matching will directly degrade SNR. Decouple AVDD and DRVDD with a 1 uF plus 0.1 uF capacitor pair placed within 2 mm of each supply pin, and provide an isolated ground plane for the digital return currents to avoid coupling switching noise back into the analog front end.
This page synthesizes distributor pricing, drop-in alternatives from the same TI family and pin-compatible cross-brand parts, application companion chips, and practical design notes that go beyond what the manufacturer datasheet alone provides.
견적 요청
문의하기
