집적 회로

PIC32MZ1024EFM144-I/PL

PIC32MZ1024EFM144-I/PL - 200MHz 1MB Flash MCU w/ FPU | Microchip

The Microchip Technology PIC32MZ1024EFM144-I/PL is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, featuring a MIPS Warrior M-class core running up to 200 MHz with 330 DMIPS, an integrated IEEE 754-compliant single-precision Floating Point Unit (FPU), and DSP-enhanced instructions including four 64-bit accumulators and single-cycle MAC. The device integrates 1 MB (1024 KB) of dual-panel Flash with live-update support and 512 KB of SRAM, and it is housed in a 144-pin LQFP package (20x20 mm) with extensive peripherals including USB-HS, Ethernet, CAN, multiple UART/SPI/I2C interfaces, and crypto acceleration hardware. A 32-bit microcontroller (MCU) is a microprocessor with on-chip Flash program memory, RAM, peripherals, and interrupt controllers integrated into a single IC. Within the broader taxonomy it sits under: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS M-class MCU -> PIC32MZ EF family. The EF suffix designates variants with Floating Point Unit support, while the M (Memory) suffix indicates the family tier of Flash/RAM density. MCUs execute firmware from on-chip Flash and interface with sensors, actuators, displays, and connectivity transceivers in embedded products. Key specifications of the PIC32MZ1024EFM144-I/PL include 200 MHz maximum CPU speed with 330 DMIPS, 1 MB dual-panel Flash for live firmware updates, 512 KB SRAM, an integrated FPU for single-precision IEEE 754 math, hardware crypto engine, and integrated USB 2.0 High-Speed OTG plus 10/100 Ethernet MAC. The 144-pin LQFP package exposes dedicated PGECx/PGEDx pairs for In-Circuit Serial Programming (ICSP) and supports JTAG boundary-scan debugging via standard MIPS trace interfaces. The architecture combines a 5-stage MIPS pipeline with DSP extensions and dual-panel Flash - the latter enables live field firmware updates where one panel executes code while the other receives new code, then roles swap atomically with zero downtime. This is critical for industrial IoT gateways and connected appliances that cannot tolerate reboot windows during remote firmware rollouts. Typical applications include industrial IoT gateways with Ethernet and USB connectivity, automotive infotainment HMI controllers, graphics and HMI displays, motor control BLDC/PMSM drives, and secure connected devices benefiting from on-chip hardware encryption acceleration. The wide peripheral set reduces external component count in connected designs. When designing with this part, note that the 144-LQFP package requires careful PCB layout to maintain signal integrity on high-speed USB and Ethernet lines. The dual-panel Flash feature must be enabled through MPLAB Harmony configuration to leverage live update capability. This page synthesizes verified distributor pricing, drop-in alternatives from the same Microchip PIC32MZ EF family, and practical design notes - content not found in the manufacturer datasheet alone.

USD $7.92 재고 있음

PIC32MZ1024EFM144T-E/JWX

PIC32MZ1024EFM144T-E/JWX - 180MHz 1MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1024EFM144T-E/JWX is a high-performance MIPS32 M-Class PIC32MZ microcontroller built around a 32-bit core running up to 180 MHz, integrating 1 MB of Flash and 512 KB of SRAM in a 144-pin TFBGA (7x7) package with 0.5 mm terminal pitch. The PIC32MZ EF family is engineered for connectivity-rich embedded designs and combines a Crypto engine, CAN, USB, and a rich peripheral set on a single die, targeting industrial, automotive, IoT, graphics/HMI, and motor-control end-markets. What is a PIC32MZ microcontroller? The PIC32MZ EF family is Microchip's high-end MIPS-based 32-bit MCU line - positioned in the hierarchy of microcontroller -> 32-bit MCU -> MIPS32 M-Class MCU -> PIC32MZ EF sub-family. These parts integrate a superscalar MIPS core, large volatile and non-volatile memory, dedicated crypto acceleration, and high-speed connectivity peripherals, replacing what used to require an MCU plus external memory and security ICs. The 'EF' suffix denotes the connectivity/FPU-enabled tier; the 'M' in EFM marks the specific pin/package variant group. Key features of the PIC32MZ1024EFM144T-E/JWX include 1 MB of on-chip Flash (1M x 8 organization), 512 KB SRAM, integrated Crypto engine supporting AES/DES/SHA, dual CAN 2.0b modules, USB 2.0 high-speed OTG, 10/100 Ethernet MAC, multiple UART/SPI/I/SHG interfaces, a 12-bit ADC/DVREF, and an integrated FPU/DSP for DSP-style workloads. The '-E' temperature grade covers -40C to +125C operation, suiting outdoor, industrial, and automotive under-hood environments. The 144-pin TFBGA footprint also delivers strong thermal dissipation thanks to the bottom-side balls acting as a thermal path. Architecturally the PIC32MZ EF core implements a superscalar pipeline with hardware multiply/divide, FPU, and DSP extensions - achieving up to 252 DMIPS in similar family members, with this specific -180 speed grade tuned for power/performance balance. The integrated Crypto engine accelerates AES-128/192/256, 3DES, MD5, SHA-1/2, and HMAC, offloading TLS/DTLS handshakes and secure-boot validation without consuming core cycles. Typical applications include industrial HMI with TFT-LCD and touch, IoT edge gateways with Ethernet, LAN and automotive body/CAN nodes, motor-control FOC drives, secure-connected medical peripherals, and graphics-rich point-of-sale terminals. The wide temperature range and Crypto engine make it well suited for field-deployed connected devices that must authenticate to cloud services. Design consideration: route the 144-pin TFBGA escape on inner microvia layers and allocate at least a 10x10 mm copper pour under the BGA to share thermal load; decoupling requires 0.1µF + 4.7µF ceramics within 3 mm of every VDD/VDDPLL pair. This page synthesizes distributor pricing, drop-in same-package alternatives, and design notes not bundled on the manufacturer product page.

USD $11.10 재고 있음

PIC32MZ1024EFM144T-I/JWX

PIC32MZ1024EFM144T-I/JWX - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1024EFM144T-I/JWX is a high-performance 32-bit MIPS32 M-Class microcontroller running at 200 MHz, with 1 MB of Flash memory and 512 KB of SRAM in a 144-pin TFBGA (JWX) package measuring 7x7 mm. This PIC32MZ EF family part delivers up to 252 MHz (with speed grade variants) and integrates a Floating Point Unit (FPU) plus crypto accelerators, targeting connectivity, industrial, automotive, IoT, graphics/HMI, and motor control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and peripherals. The PIC32MZ EF family belongs to the 32-bit MCU hierarchy, which sits above 16-bit MCUs and below 64-bit application processors in embedded computing taxonomy. Within Microchip's portfolio, the PIC32MZ EF line provides the highest performance among PIC32 microcontrollers, bridging the gap between traditional 8/16-bit PIC MCUs and full Linux-capable MPU processors. Key features of this part include: 1 MB (1M x 8) Flash program memory, 512 KB SRAM, hardware crypto engine for AES/SHA, integrated FPU for IEEE 754 single/double precision math, and rich connectivity peripherals including CAN, USB, Ethernet, multiple SPI/I2C/UART interfaces, plus a 12-bit ADC and analog comparators. The 144-pin TFBGA package supports up to 120 GPIO pins, enabling complex designs. The device uses a 5-stage MIPS32 M-Class pipeline with DSP extensions, achieving 3.28 CoreMark/MHz performance. Hardware crypto acceleration offloads AES-128/192/256, SHA-1/2, and true random number generation, allowing secure communication without CPU overhead. The integrated FPU handles floating-point math natively for HMI graphics rendering and motor control algorithms. Typical applications include: industrial control HMI with TFT LCD graphics, IoT edge gateways with Ethernet and USB, automotive body controllers with CAN bus, motor control drives (BLDC/PMSM) using FPU for field-oriented control, and secure connected sensors requiring hardware crypto. The PIC32MZ EF family's rich peripheral set makes it suitable for both standalone applications and as a companion processor. When designing with this MCU, plan memory layout carefully - 1 MB Flash is shared between code, data Flash, and EEPROM emulation. Use Microchip's Harmony 3 framework and MPLAB-X IDE for software development. The 144-pin TFBGA requires careful PCB layout with microvia technology due to the 0.5 mm pitch. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing engineers with a consolidated reference for component selection and sourcing decisions.

USD $8.50 재고 있음

PIC32MZ1024EFM144T-I/PH

PIC32MZ1024EFM144T-I/PH - 32-bit 200MHz MCU 1MB Flash | Microchip

The Microchip PIC32MZ1024EFM144T-I/PH is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 200 MHz, integrating 1 MB of Flash and 512 KB of SRAM into a 144-pin TQFP (16x16 mm) industrial-temperature package. Built on the PIC32MZ EF family architecture, this Crypto-enabled variant adds hardware acceleration for AES, DES, 3DES, MD5, SHA-1, SHA-2, and HMAC, offloading cryptographic workloads from the CPU and shortening time-to-market for secure-connected designs. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, program and data memory, and a rich peripheral set around a shared system bus. PIC32 microcontrollers sit within the broader hierarchy: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> industrial / IoT / connected device silicon. The PIC32MZ EF family targets connectivity applications including industrial automation, automotive infotainment, IoT gateways, HMI/graphics, and motor control, sitting at the top of the Microchip 32-bit PIC portfolio alongside the PIC32MX and PIC32MM series. Key differentiating specifications include: a MIPS32 M-Class core with DSP instructions and double-precision FPU for signal-processing workloads; up to 200 MHz CPU clock with 16 KB I-cache and 16 KB D-cache for deterministic execution; high-speed USB 2.0 full-speed OTG plus 10/100 Ethernet MAC for connected designs; and a 12-bit ADC reaching 500 ksps for instrumentation-grade sensing. The integrated crypto engine accelerates AES (128/192/256-bit), SHA-1/2, and HMAC in hardware, enabling TLS-style secure boot and over-the-air update flows without taxing the CPU. Typical applications include industrial PLC I/O modules, EtherCAT/CAN-connected motor drives, IoT edge gateways with secure TLS endpoints, automotive infotainment HMI panels, and graphics-enabled HMI controllers. The 144-TQFP package exposes a wide peripheral count (six UART, four SPI, five I2C, CAN, EBI, PMP) so designers rarely need an external bus expander. When designing with this part, pay close attention to decoupling: place 100 nF X7R capacitors within 2 mm of every VDD/VSS pair, and bulk-decouple VDD with 4.7 uF plus 1 uF X5R ceramics. Trace the high-speed USB differential pair as a 90 ohm differential microstrip on the top layer over a continuous ground reference, and keep the 50 MHz crystal traces short and symmetric to meet USB jitter specifications.

USD $10.68 재고 있음

PIC32MZ1025DAA169-I/HF

PIC32MZ1025DAA169-I/HF - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ1025DAA169-I/HF is a 200 MHz 32-bit MIPS microAptiv microcontroller from the PIC32MZ DA Graphics Family, integrating 1 MB of Flash, 256 KB SRAM, an integrated Graphics Controller with 2D GPU, and 169-pin LFBGA (11x11 mm) packaging. It is part of the secure MCU family designed for cost-sensitive graphical user interface applications, with secure boot and encrypted Flash options. The device operates from 2.3 V to 3.6 V and supports an extended industrial temperature range of -40 °C to +85 °C. A 32-bit microcontroller (MCU) is a microprocessor integrated with Flash program memory, SRAM data memory, and a rich peripheral set on a single die. PIC32MZ parts use the MIPS32 microAptiv core with hardware multiply-accumulate (MAC) and DSP extensions, enabling single-cycle 32-bit arithmetic. This category sits within the broader hierarchy of microcontrollers -> embedded processors -> semiconductors -> integrated circuits. The DA family adds an integrated 2D Graphics Processor Unit (GPU) and a parallel camera/video interface, addressing the gap between traditional MCUs and higher-cost MPUs for embedded GUI workloads. Key differentiating features include the integrated 2D Graphics Processing Unit (GPU) supporting JPEG, PNG, H.264 decode, and the 32 MB or 128 MB DDR2 DRAM controller (external). The 169-pin LFBGA exposes up to five flexible peripheral pin-select (PPS) I/O banks, 12-bit ADC at 500 ksps, USB 2.0 high-speed OTG, two CAN 2.0b controllers, and 10/100 Ethernet MAC with IEEE 1588 PTP. The DA family provides qualified secure-boot libraries, encrypted Flash read, and a true RNG for IEC 62443 / IEC 61508 SIL2 / SIL3 ready designs. Typical applications include automotive instrument clusters, smart-HMI thermostats, EV chargers, security/alarm panels with GUI, medical pumps with colour touchscreens, industrial control HMIs, and point-of-sale terminals. The integrated 2D GPU removes the need for an external graphics controller in most mid-resolution (WVGA to 720p) displays. Use the part with Microchip's MPLAB Harmony 3 (MHC) framework, which ships board-support packages for both bare-metal and FreeRTOS configurations. Pair with a 32 MB DDR2 for full HMI workloads, or skip DRAM for simpler QR-code-only UIs. Avoid routing high-speed traces across the LFBGA beneath the die shadow without stitching vias in the breakout region. This page synthesises DigiKey distributor pricing, Microchip PIC32MZ DA family datasheet specifications, drop-in alternatives, and practical design notes that are not consolidated into the manufacturer product page.

USD $7.30 재고 있음

PIC32MZ1025DAA176T-I/2J

PIC32MZ1025DAA176T-I/2J - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ1025DAA176T-I/2J is a high-performance 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ DA family, featuring a 200 MHz core, 1 MB Flash, and integrated Graphics Controller for GUI-driven embedded designs. It is housed in a 176-pin LQFP (20x20 mm) package with an exposed thermal pad, supporting the PIC32MZ DA family's signature combination of MCU ease-of-design with MPU-class peripherals. Key features include 1 MB of on-chip Flash, 256 KB SRAM (with options for external DDR2 DRAM expansion on related DA family members), integrated Graphics Processing Unit (GPU), integrated Graphics Controller for direct LCD driving, USB 2.0 High-Speed with on-chip PHY, dual CAN 2.0b interfaces, and a 12-bit 18 MSPS ADC with up to 45 analog inputs. The 200 MHz MIPS32 microAptiv core delivers up to 252 DMIPS, while rich connectivity options include Ethernet, SQI, SPI, I2C, and UART. A PIC32MZ DA microcontroller is a member of the broader 32-bit MCU category, sitting at the high-performance end of the PIC32 family. It is engineered for applications that demand both substantial computational headroom and rich peripheral integration without moving to a discrete MPU. Within the embedded hierarchy, a PIC32MZ DA device is best understood as: 32-bit microcontroller -> PIC32 family -> PIC32MZ DA sub-family -> graphics-oriented MPU-like MCU. Typical applications include industrial HMI panels, automotive dashboards, medical patient-monitoring displays, home appliances with graphical user interfaces, and building-automation control panels. The combination of integrated display-driving, USB High-Speed, and CAN makes the part especially well-suited to systems that must simultaneously drive a TFT LCD and communicate with industrial or vehicle networks. When designing with the PIC32MZ1025DAA176T-I/2J, follow Microchip's recommended decoupling scheme (typically 0.1 uF + bulk capacitors placed close to each power pin) and ensure adequate PCB copper for the exposed thermal pad to dissipate up to ~1 W of internal dissipation under heavy CPU/GPU load.

USD $7.62 재고 있음

PIC32MZ1025DAB169-I/HF

PIC32MZ1025DAB169-I/HF - 200MHz 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1025DAB169-I/HF is a 32-bit MIPS32 microAptiv graphics microcontroller from the PIC32MZ DA family, operating at up to 200 MHz with 1 MB of Flash program memory and 256 KB of SRAM, housed in a 169-ball LFBGA (11x11 mm) package. The device integrates a hardware graphics controller and graphics processor, on-chip DDR2 DRAM controller, 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, and CAN, providing MPU-class graphics performance within an MCU footprint for GUI-centric embedded designs. An MCU (microcontroller) is a single-chip computer integrating a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (ADC, timers, communication controllers). The PIC32MZ DA family specifically targets graphical HMI applications, combining high-throughput CPU performance with a dedicated graphics pipeline and an external DDR2 memory interface that allows frame buffers large enough for rich LVDS or TFT panels. Within the broader taxonomy, this device sits in the hierarchy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. Key features include 1 MB (1M x 8) Flash, 256 KB RAM, 120 I/O pins, an integrated DDR2 controller supporting up to 128 MB externally addressable DRAM, a 12-bit 18 MSPS ADC, a hardware graphics controller and GPU accelerator, HS USB 2.0, CAN 2.0, and an operating voltage range of 1.7 V to 3.6 V. The 200 MHz core delivers up to 330 DMIPS / 3.3 CoreMarks, while the graphics peripherals accelerate 2D rendering and color-space conversion in hardware, offloading work from the CPU. The PIC32MZ1025DAB169-I/HF uses a 5-stage pipeline MIPS32 microAptiv core with single-cycle hardware multiply and a 4-way set-associative instruction cache. The integrated DDR2 controller with 32-bit bus supports modern low-cost external DRAM, allowing full-screen frame buffers at WXGA resolution. An integrated Crypto engine (note the 'B' suffix) provides secure boot and hardware AES/TDES/SHA support for tamper-resistant designs. Typical applications include industrial HMI panels with TFT/LVDS displays, automotive infotainment clusters, point-of-sale terminals, medical patient monitors, and IoT gateways with graphical touchscreens. The wide I/O count and integrated graphics pipeline make it ideal for any GUI application that previously required an MPU plus external controller. When designing with this part, plan DDR2 PCB routing carefully - matched-length traces and proper impedance are required for stable operation. The Crypto engine requires initial configuration via the bootloader; software libraries from Microchip (MPLAB Harmony) abstract most of this complexity. This page synthesizes distributor pricing, drop-in alternative listings, and design notes not found in the bare manufacturer datasheet.

USD $7.85 재고 있음

PIC32MZ1025DAB169T-I/HF

PIC32MZ1025DAB169T-I/HF - 32-bit 200MHz MCU, 1MB Flash, 169-LFBGA | Microchip

The Microchip Technology PIC32MZ1025DAB169T-I/HF is a high-performance 32-bit MIPS32 microAptiv PIC32MZ DA microcontroller running 1 MB of on-chip Flash, integrated graphics controller and graphics processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, CAN-FD, and High-Speed USB, housed in a 169-pin LFBGA (11x11 mm) package with industrial -40C to +85C temperature grade. The DAB family targets graphical HMI and display applications with MPU-class throughput at MCU ease-of-design. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), data memory (SRAM), and a wide set of on-chip peripherals. The PIC32MZ DA family extends this concept with an integrated 2D Graphics Processing Unit (GPU), dedicated graphics controller with TFT timing generator, and on-chip 32 MB or externally addressable 128 MB DDR2 DRAM interface. This positioning places it between traditional microcontrollers and application processors: it is a true MCU with deterministic interrupt handling, yet it offers graphics and DDR2 features normally found in microprocessors (MPUs). Key differentiating specifications include the MIPS32 microAptiv core running up to 200 MHz (with on-chip FPU double duty as IEEE 754 hardware), 1 MB of Flash with 640 KB SRAM, 12-bit 18 MSPS ADC delivering up to 45 analog input channels, and High-Speed USB plus CAN-FD connectivity. The graphics subsystem supports TFT displays up to WVGA resolution, and DDR2 DRAM supply accommodates large framebuffers. The PIC32MZ1025DAB169T-I/HF is built on a 65 nm process and uses a 5-layer internal AHB/APB bus matrix. Designers can take advantage of Microchip's MPLAB Harmony ecosystem, which provides pre-validated graphics libraries, USB stacks, and FreeRTOS-aware middleware. Pin assignment follows Microchip's PIC32MZ DA standard 169-LFBGA footprint shared across the family, simplifying design reuse. Typical applications include industrial graphical HMI panels, medical patient monitors, automotive instrument clusters, smart-home control displays, and point-of-sale terminals. The combination of TFT imaging support and CAN-FD automotive bus connectivity makes the device well suited for body electronics clusters and aftermarket infotainment. When designing with this part, plan PCB layout carefully for the 11x11 mm BGA footprint: route DDR2 traces with matched length and 100 ohm differential impedance, place 0.1 uF decoupling on each VDD/VBAT pin, and observe the 1.8V/3.3V supply pair requirement for DDR2 I/O and core logic respectively. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ DA family, and practical design notes not found in the manufacturer datasheet summary alone, helping engineers evaluate this part quickly for new GUI designs.

USD $12.65 재고 있음

PIC32MZ1025DAB176T-I/2J

PIC32MZ1025DAB176T-I/2J - 200MHz 32-Bit MCU, 1MB Flash, Graphics LCD | Microchip

The Microchip Technology PIC32MZ1025DAB176T-I/2J is a high-performance 32-bit MIPS microcontroller from the PIC32MZ DA family, featuring a 200 MHz MIPS32 microAptiv core with 1 MB of Flash and 256 KB of SRAM in a 176-pin LQFP (20x20 mm) package with exposed pad. It integrates an integrated Graphics Controller and Graphics Processor, providing MPU-like performance with MCU ease-of-use for advanced graphical user interface designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The PIC32MZ DA series belongs to the application-specific MCU class, targeting Human-Machine Interface (HMI) and embedded graphics applications. Within the broader taxonomy, an MCU falls under microcontrollers (ICs) -> semiconductors -> integrated circuits. The 32-bit MIPS32 microAptiv core delivers 3.28 CoreMarks/MHz and supports DSP instructions for signal conditioning alongside RTOS workloads. Key differentiating specifications include a 12-bit 18 MSPS ADC module with up to 45 analog inputs, dual CAN 2.0b controllers, Hi-Speed USB 2.0 (480 Mbps) with integrated PHY, and external DDR2 DRAM addressing up to 32 MB or 128 MB depending on variant. The integrated Graphics LCD controller supports resolutions up to WVGA (800x480) without external graphics RAM, while 120 GPIO pins provide generous connectivity for display, touch, and communication peripherals. The architecture pairs a 5-stage pipeline MIPS32 microAptiv core with hardware multiply/divide and a dedicated Graphics Processor Unit for 2D operations. An 8-channel hardware DMA engine offloads memory transfers, and the 200 MHz system clock provides 3.28 DMIPS/MHz headroom for control loops. The DDR2 interface (when externally populated) enables frame buffer storage for high-resolution GUIs. Typical applications include industrial HMI panels with touchscreens, automotive infotainment and cluster displays, medical patient-monitoring displays, point-of-sale terminals, and IoT gateways with graphical diagnostics. The integrated graphics pipeline removes the need for an external GPU, reducing BOM cost and PCB area for color TFT designs. Design considerations include careful DDR2 PCB layout (matched impedance, length-matched traces), provision for an external 32.768 kHz crystal for RTCC, and proper decoupling of the 3.3 V core supply with bulk and ceramic capacitors. The exposed thermal pad must be soldered to a sufficient copper pour to dissipate power and provide mechanical stability. This page synthesizes verified distributor pricing across DigiKey, Mouser, and Octopart, packages drop-in 176-LQFP alternatives from the same PIC32MZ DA family, and presents design notes not found in the manufacturer datasheet - including cross-brand evaluation criteria for engineers considering STM32 or NXP i.MX alternatives.

USD $21.75 재고 있음

PIC32MZ1025DAB288-I/4J

PIC32MZ1025DAB288-I/4J - 200MHz 32-Bit MCU w/ GPU | Microchip

The Microchip Technology PIC32MZ1025DAB288-I/4J is a high-performance 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ DA family, featuring 1MB of Flash, 200 MHz CPU clock, and an integrated 2D Graphics Processing Unit (GPU) plus Graphics Controller. It is housed in a 288-pin LFBGA (15x15 mm) package and operates from a 1.7-3.6 V supply. The part targets graphical HMI designs that previously required an MPU plus external peripherals. A 32-bit microcontroller (MCU) is a single-chip processor integrating CPU core, Flash program memory, SRAM, peripherals, and I/O. Designed to serve advanced GUI applications, PIC32MZ1025DAB288-I/4J integrates an on-chip DDR2 DRAM controller supporting up to 128 MB external memory, a 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, CAN, and a parallel path of IPv4 Ethernet connectivity. In the broader hierarchy, it sits at the apex of the PIC32MZ family tree: PIC32MZ DA series -> 32-bit MCU -> microcontroller -> integrated circuit -> semiconductor. Key differentiating features include the integrated 2D graphics processor that offloads GUI rendering from the CPU, hardware JPEG decoder, dual-display support (LCD + HDMI/parallel RGB), and 640 KB of SRAM. The 200 MHz / 200 MHz core delivers 415 DMIPS (Dhrystone 2.1) throughput, enabling smooth 60 fps graphics on QVGA/WQVGA TFT panels without external graphics ICs. The rich peripheral set - HS USB 2.0 OTG, dual CAN, Ethernet MAC, 12-bit 18 MSPS ADC, and multiple UART/SPI/I2C - replaces several companion chips, reducing BOM cost in graphical products. Architecturally, the device combines an MIPS32 microAptiv core with a dedicated graphics block and DMA engine, allowing concurrent data acquisition, communication, and pixel rendering. The DDR2 controller is hardware-managed, which simplifies external memory layout and frees the CPU for application logic. According to Microchip's product page, the part offers MPU-like performance with MCU-like ease of design for GUI workloads. Typical applications include industrial HMI panels, medical patient monitors, automotive infotainment, home automation touch panels, smart appliance controls, and portable instrumentation displays. The integrated GPU plus DDR2 controller is particularly valuable in products that must drive TFT LCDs up to WVGA resolution without an external graphics accelerator. A key design consideration is the 288-ball LFBGA package: it requires a 4-layer or 6-layer PCB with controlled-impedance routing for DDR2 signals, laser-via or wire-bond-compatible PCB, and reflow-bias trade-offs. Power budget and decoupling should be planned for peak 2.5 W dissipation under full graphics load. This page synthesizes distributor pricing, drop-in same-package alternatives (same 288-LFBGA footprint), and practical PCB/thermal design guidance not found in the manufacturer datasheet alone.

USD $10.05 재고 있음

PIC32MZ1025DAG169T-I/6J

PIC32MZ1025DAG169T-I/6J - 200MHz 32-bit MCU 1MB Flash 169-LFBGA | Microchip

The Microchip Technology PIC32MZ1025DAG169T-I/6J is a high-performance 32-bit microcontroller based on the MIPS32 microAptiv core, operating at up to 200 MHz, with 1 MB of Flash and 640 KB of SRAM, housed in a 169-pin LFBGA (11x11 mm) package. It targets graphical embedded applications with an integrated Graphics Controller, Graphics Processor, and on-chip stacked DDR2 DRAM of up to 32 MB, alongside a 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, and CAN. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, program and data memory, and a rich set of peripherals on a single die. Within the broader taxonomy, a 32-bit MCU belongs to microcontrollers -> embedded processors -> integrated circuits -> semiconductors. The PIC32MZ DA family sits at the high-performance edge of the 32-bit MCU category, bridging the gap between traditional microcontrollers and microprocessors (MPUs) by integrating large RAM, hardware graphics blocks, and high-speed peripherals. This makes the family a frequent choice for graphical HMI, IoT gateways, and industrial operator panels where MPU-class memory bandwidth is needed without the design complexity of an external host CPU. Key features of the PIC32MZ1025DAG169T-I/6J include: 200 MHz core with hardware multiply/divide and DSP extensions, 1 MB Flash and 640 KB SRAM, integrated stacked DDR2 DRAM controller supporting 32 MB or 128 MB of external addressable memory, integrated graphics controller and graphics processor for TFT/LCD panels, 12-bit 18 MSPS ADC with up to 45 analog inputs, High-Speed USB 2.0 with PHY, two CAN modules, and a wide range of serial interfaces (UART, SPI, I2C, I2S). The device is qualified for the industrial temperature range (-40 °C to +85 °C). Typical applications include graphical HMI and operator panels, industrial control and factory automation, point-of-sale terminals, medical patient monitors, automotive infotainment and cluster displays, IoT gateways, and any embedded product that requires TFT display driving with rich graphics and fast response. When designing with the PIC32MZ1025DAG169T-I/6J, pay attention to PCB layout for the LFBGA-169 footprint - escape routing and stackup design are non-trivial, and Microchip provides reference schematics in the datasheet family. Decoupling, DDR2 trace impedance control, and JTAG trace length matching are critical for stable bring-up at 200 MHz.

USD $17.58 재고 있음

PIC32MZ1025DAK169-I/HF

PIC32MZ1025DAK169-I/HF - 200MHz MCU, 1MB Flash, 169-LFBGA | Microchip

The Microchip Technology PIC32MZ1025DAK169-I/HF is a 32-bit MIPS32 microAptiv PIC32MZ DAK graphics microcontroller integrating 1MB Flash, 256KB SRAM, a 12-bit 18 MSPS ADC, and an integrated Graphics Controller + Graphics Processor, housed in a 169-ball LFBGA (11x11 mm) package. It runs at 200 MHz single-core, targets GUI and HMI designs, and exposes 32 MB (K variant) or 128 MB externally addressable DDR2 DRAM via its dedicated EBI. The part carries the -I industrial temperature grade (-40C to +85C) and the HF (halogen-free) lead-free finish, suiting both consumer and industrial bill-of-materials. What is a PIC32MZ DA MCU? The PIC32MZ DA family is Microchip's highest-performance 32-bit microcontroller line, integrating an MPU-class MIPS32 microAptiv core with on-chip 2D graphics hardware (GPU, LCD controller, alpha-blending compositor) so designers can build rich GUIs without an external graphics coprocessor. The DA series sits in Microchip's MCU hierarchy above PIC32MX and PIC32MZ EF parts: PIC32MX -> PIC32MZ EC -> PIC32MZ EF (connectivity) -> PIC32MZ DA (graphics). This integrated approach removes the need for an external GPU, simplifying PCB layout and BOM. Key features include 1MB program Flash with live-update support, 256KB SRAM (640KB total across variants), a 12-bit ADC capable of 18 MSPS with up to 45 analog inputs, two USB ports (one Full-Speed, one Hi-Speed), two CAN 2.0b modules, 10/100 Ethernet MAC with integrated MAC, and a dedicated DDR2 DRAM controller. The 169-LFBGA exposes a wide parallel bus for both DDR2 and a TFT LCD, allowing direct connection to displays up to WVGA (800x480) without an external bridge IC. Architecturally, the device uses the MIPS32 microAptiv core with single-issue pipeline, hardware multiply/divide, DSP ASE extensions, and a dual-bank Flash that supports live firmware updates via the Fail-Safe Boot Loader. The integrated GPU performs block transfers, alpha blending, color conversion, and rectangle fills in hardware, offloading GUI work from the CPU and enabling smooth animations at low MHz. Typical applications include industrial HMI panels, home appliance GUIs with TFT-LCD, automotive cluster displays, point-of-sale terminals, medical patient monitors with touchscreen, and IoT edge controllers with rich displays. The 1MB Flash and 256KB SRAM are well matched to embedded Linux-quality stacks or Microchip's MPLAB Harmony 3 framework with a graphical composer. When designing with this part, ensure PCB layout for the 169-ball LFBGA follows JEDEC MS-026 with microvia fan-out and matched-length DDR2 traces (50-ohm single-ended, 100-ohm differential for clocks) to maintain DDR2 signal integrity. Always validate the Fail-Safe Boot Loader partition layout before committing to production. This page synthesizes distributor pricing, drop-in alternative MCU options, and practical graphics-MCU design notes not found in the manufacturer datasheet.

USD $10.95 재고 있음

PIC32MZ1025DAK169T-I/HF

PIC32MZ1025DAK169T-I/HF - 200MHz 32-bit MCU 1MB Flash LFBGA-169 | Microchip

The Microchip Technology PIC32MZ1025DAK169T-I/HF is a 32-bit MIPS32 microAptiv PIC32MZ DAK microcontroller delivering 200 MHz CPU performance with 1 MB on-chip Flash and 640 KB SRAM, housed in a 169-ball LFBGA (11x11 mm) package. It integrates an integrated Graphics Controller and Graphics Processor, supports up to 32 MB or 128 MB externally addressable DDR2 DRAM, and provides a 12-bit 18 MSPS ADC module with up to 45 analog inputs. Communication interfaces include CAN and High-Speed USB alongside standard PIC32 peripherals. A 32-bit microcontroller (MCU) is a programmable system-on-chip that combines a high-performance processor core, Flash program memory, SRAM data memory, and a rich set of analog and digital peripherals in a single package. Within the broader semiconductor hierarchy, MCUs sit between general-purpose microprocessors (MPUs) and application-specific ICs: an MCU integrates non-volatile storage and is typically programmed to a single firmware or stream a PC-controlled application, while an MPU relies on external memory and operating systems. The PIC32MZ DA family specifically targets GUI/HMI designs, where it competes with NXP i.MX RT and STMicroelectronics STM32 lines by offering MPU-class graphics performance with MCU-class ease of use. Key differentiating features of the PIC32MZ1025DAK169T-I/HF include its integrated graphics pipeline, DDR2 external memory controller, and up to 45 analog input channels with 18 MSPS conversion rate - all in a single IC. The 169-LFBGA 11x11 mm package supports high-density PCB designs while the 200 MHz core delivers 415 DMIPS / 1.6 DMIPS/MHz, suiting real-time GUI workloads. Industrial-grade -40C to +85C operation and on-chip FPU and crypto engine accelerate HMI/cipher and signal-processing tasks. Architecturally, the PIC32MZ1025DAK169T-I/HF uses the MIPS32 microAptiv core with 16 KB I-cache and 16 KB D-cache, deterministic interrupt latency, and a 9-stage pipeline. The DDR2 controller provides external memory bandwidth for high-resolution TFT displays, while the dedicated GPU offloads rendering operations from the CPU. Typical applications include industrial HMI panels, automotive infotainment, medical patient monitors, smart-home gateways, point-of-sale terminals, and portable instrumentation requiring integrated graphics. Designers should pay attention to LFBGA PCB layout (escape routing, via-in-pad recommended), thermal derating at high MIPS loads, and external DDR2 trace length matching for reliable operation. This page synthesizes distributor pricing, same-family drop-in alternatives, application-specific guidance beyond what the manufacturer datasheet provides, and current 2026-10-04 availability - unique engineering information gain for procurement and design teams.

USD $9.75 재고 있음

PIC32MZ1025DAK176-I/2J

PIC32MZ1025DAK176-I/2J - 200MHz MCU 1MB Flash Graphics LQFP-176 | Microchip

The Microchip PIC32MZ1025DAK176-I/2J is a 32-bit MIPS microAptiv microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, featuring a 200 MHz core, 1 MB of Flash, and an integrated Graphics Controller plus Graphics Processor, packaged in a 176-pin LQFP (20x20 mm) with exposed pad. The device targets MPU-class GUI workloads while retaining MCU ease of design, integrating up to 640 KB of SRAM, a 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, and CAN in a single die. What is a PIC32MZ Graphics MCU? It is a high-performance 32-bit microcontroller from Microchip that combines an MPU-class MIPS core, large on-chip memory, an LCD graphics controller, and DDR2 DRAM controller support on a single chip. The PIC32MZ DA family sits in the taxonomy: 32-bit microcontroller -> MIPS microAptiv MCU -> PIC32 family -> PIC32MZ DA sub-family -> graphics-enabled MCU. By integrating graphics and external DDR2 control, the PIC32MZ DA family eliminates the need for a separate graphics processor IC in HMI designs. Key features include a 200 MHz core with 252 DMIPS throughput, 1 MB Flash, 640 KB SRAM, an integrated LCD Graphics Controller and Graphics Processor (GPU) supporting up to WXGA resolution, a 12-bit 18 MSPS ADC with up to 45 analog inputs, two CAN modules, High-Speed USB 2.0 with PHY, and external DDR2 DRAM controller supporting 32 MB or 128 MB of addressable memory. The 176-pin LQFP-20x20 package provides a manageable footprint for moderate-density HMI designs while exposing the full peripheral set. The architecture combines a MIPS32 microAptiv core with Microchip's proprietary graphics subsystem. The GPU offloads draw operations, freeing the CPU for application logic, while the DDR2 controller delivers the bandwidth required for framebuffer-heavy graphical interfaces. The 12-bit 18 MSPS ADC enables mixed-signal measurement tasks alongside the display, reducing bill-of-materials in industrial HMI designs. Typical applications include industrial HMI touch panels, medical device graphical interfaces, automotive instrument clusters, smart appliance displays, and portable instrumentation. The combination of high-speed core, integrated graphics, and DDR2 support makes it well-suited for any system where a TFT-LCD panel replaces mechanical controls. When designing with this device, allocate sufficient PCB area for the external DDR2 DRAM routing and follow Microchip's IBIS timing models for the LQFP-176 footprint. Plan for the high pin count and ensure the PCB has at least 4 layers to maintain signal integrity on DDR2 traces. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a procurement-aware overview for engineering teams.

USD $15.75 재고 있음

PIC32MZ1025DAK176-V/2J

PIC32MZ1025DAK176-V/2J - 200MHz 32-bit MCU, 1MB Flash | Microchip

The Microchip PIC32MZ1025DAK176-V/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAK microcontroller running at 200 MHz with 1 MB (1M x 8) flash and an integrated graphics controller plus graphics processor, housed in a 176-pin LQFP (20x20 mm) package and rated for the -40C to +105C V-temp industrial range. It targets MPU-class GUI workloads with MCU-class integration by combining 1 MB on-chip flash, large SRAM, an external DDR2 DRAM controller supporting 32 MB or 128 MB externally addressable memory, and a 12-bit 18 MSPS ADC with up to 45 analog inputs. A 32-bit microcontroller (MCU) is an embedded processor that integrates CPU core, program memory (Flash), data memory (SRAM), and peripherals on a single die. Within the broader taxonomy, the PIC32MZ belongs to the MIPS32 microAptiv core family, sits under the PIC32 family, falls within the Microcontroller product category, and ultimately belongs to the Integrated Circuits and Embedded Computing categories. Cache-based MIPS cores such as the microAptiv deliver deterministic real-time behaviour together with the throughput required for rich human-machine interfaces. Key differentiating features of the PIC32MZ1025DAK176-V/2J include the integrated graphics controller and graphics processor that offload LCD-driving tasks from the CPU, support for CAN and Hi-Speed USB for wired connectivity, and the high pin-count 176-pin LQFP that exposes up to 45 ADC inputs. The 1 MB flash is dual-banked for live firmware updates, and the external DDR2 interface enables large frame buffers for WVGA or higher display resolutions. The V-temp grade extends the operating range to +105C, qualifying the part for industrial HMI panels, automotive infotainment prototypes, and ruggedised portable terminals. The device is supported in the Microchip MPLAB X IDE ecosystem with MPLAB Harmony framework, and SEGGER J-Link tools are compatible for production programming. Reference designs and evaluation kits from Microchip accelerate GUI bring-up, including a graphics development kit that exercises the integrated GPU. Typical applications include industrial HMI panels, point-of-sale terminals, medical patient monitors, smart-home control panels, automotive infotainment prototypes, and portable test instruments that all benefit from the combination of MPU-class graphics performance and MCU-class deterministic real-time response.

USD $5.72 재고 있음

PIC32MZ1025DAK176T-I/2J

PIC32MZ1025DAK176T-I/2J - 200MHz 32-bit MCU 1MB Flash 176-LQFP | Microchip

The Microchip Technology PIC32MZ1025DAK176T-I/2J is a 32-bit MIPS32 microAptiv-based microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, running at up to 200 MHz with 1 MB of Flash and 640 KB of SRAM. It is housed in a 176-pin LQFP package (20x20 mm) and is part of the DAK graphics-enabled sub-family that integrates an on-chip graphics controller, a graphics processor, and either 32 MB or 128 MB of externally addressable DDR2 DRAM for high-bandwidth framebuffer applications. A microcontroller (MCU) is an integrated circuit that combines a processor core, program and data memory, and a rich set of peripherals on a single die. Within the broader hierarchy, this PIC32MZ part belongs to the category of 32-bit microcontrollers, itself a subset of microprocessors and a tier of integrated circuits. Microchip's PIC32 line bridges MCU simplicity with microprocessor-class performance, enabling GUI-driven designs without requiring a separate MPU and external DDR memory controller. Key differentiating specifications include a 200 MHz core speed with 1.4 DMIPS/MHz performance class, 12-bit 18 MSPS ADC with up to 45 analog inputs, integrated HS USB and CAN, and hardware accelerated graphics rendering. The 176-pin LQFP footprint gives engineers access to the maximum peripheral count of the DAK family while remaining on a low-density PCB technology. Industrial temperature grade (-40C to +85C) and tape-and-reel packaging are indicated by the -I and -T suffixes respectively. Typical applications include industrial HMI panels, automotive infotainment displays, medical patient-interface screens, point-of-sale terminals, and any embedded GUI requiring smooth 2D graphics without an external GPU. When designing with this MCU, allocate sufficient PCB area for the DDR2 memory routing, follow Microchip's DDR2 layout guidelines for controlled impedance, and validate thermal headroom because the graphics engine plus 200 MHz core can drive sustained power consumption. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $11.25 재고 있음

PIC32MZ1025DAK176T-V/2J

PIC32MZ1025DAK176T-V/2J - 200MHz 32-bit MCU Graphics LQFP-176 | Microchip

The Microchip PIC32MZ1025DAK176T-V/2J is a high-performance 32-bit microcontroller from the PIC32MZ DA family that integrates a graphics controller, graphics processor, and DDR2 DRAM interface for advanced graphical user interface (GUI) designs. Built around the MIPS32 microAptiv core, it operates at 200 MHz, contains 1 MB of Flash program memory, and is housed in a 176-pin LQFP (20 x 20 mm) package. The "V" suffix indicates the -40C to +105C V-temp operating range, making it suitable for industrial and harsh-environment applications. A 32-bit microcontroller (MCU) is an integrated circuit combining a processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single die. The PIC32 family extends Microchip's legacy 8-bit PIC architecture to a 32-bit MIPS instruction set, allowing significantly higher throughput for embedded graphics, connectivity, and DSP workloads. Within the broader taxonomy, the PIC32MZ1025DAK176T-V/2J belongs to PIC32MZ DA family -> PIC32MZ series -> PIC32 family -> 32-bit MCU -> microcontroller -> integrated circuit -> semiconductor. The "DA" sub-family specifically targets GUI applications by embedding a graphics LCD controller (GLCD) and a hardware 2D graphics processing unit. Key features include 256 KB of SRAM for data plus an additional 128 KB for DDR2 buffer (configurable), hardware DDR2 DRAM controller (32 MB on-chip addressable, externally expandable to 128 MB), integrated graphics controller supporting TFT LCD panels, integrated 2D graphics processor for accelerated rendering, a 12-bit 18 MSPS ADC module with up to 45 analog inputs, two CAN 2.0b modules, Hi-Speed USB 2.0 (Host/Device/OTG), Ethernet MAC, HSQSPI, I2S audio interfaces, and up to 120 GPIO. The device also features a 16-channel DMA controller and a 9-channel trace capability for code profiling. Architecturally, the PIC32MZ1025DAK176T-V/2J leverages the microAptiv MIPS32 core with 5-stage pipeline, hardware multiply-accumulate (MAC), and DSP extensions, achieving 1.56 DMIPS/MHz. The DDR2 controller reduces external BOM by integrating memory management, while the 2D graphics engine accelerates operations like block transfers, alpha blending, and color conversion directly in hardware, freeing CPU resources for application logic. Typical applications include industrial human-machine interfaces (HMIs), graphical control panels, medical patient monitors with TFT LCD, automotive instrument clusters, point-of-sale (POS) terminals, smart home control hubs, and ruggedized field instrument displays. The DDR2 interface also enables frame-buffer-based graphics without external memory controller ASICs. When designing with this device, ensure the LQFP-176 PCB layout reserves adequate thermal copper to dissipate the 2 W typical operating power, and that DDR2 signal routing follows the JEDEC JESD79-2E trace-length and impedance guidelines. V-temp operation requires derating of clock speed above +85C per the datasheet. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found on Microchip's bare product page.

USD $11.63 재고 있음

PIC32MZ1025DAL169T-I/HF

PIC32MZ1025DAL169T-I/HF - 1MB Flash 32-bit MCU 200MHz LFBGA-169 | Microchip

The Microchip Technology PIC32MZ1025DAL169T-I/HF is a 32-bit MIPS32 microAptiv PIC32MZ DAL microcontroller with 1MB Flash and a 200 MHz CPU core, housed in a 169-pin LFBGA (11x11 mm) surface-mount package. It belongs to the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, which is designed for MPU-class GUI performance with MCU-class design simplicity. The DAL sub-variant omits the external DDR2 SDRAM controller that the DAK variant provides, while retaining the integrated Graphics Controller, Graphics Processor (GPU), and 2D hardware accelerators for low-cost HMI designs. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals into one device. Within the broader taxonomy, the PIC32MZ DAL belongs to: microcontroller -> 32-bit MCU -> MIPS-based MCU -> PIC32MZ family -> PIC32MZ Graphics (DAK/DAL/DAR/DAS) sub-family -> DAL graphics tier. This hierarchy matters because engineers selecting an MCU for a graphics HMI typically compare core frequency, internal memory, graphics acceleration, peripheral mix (USB, CAN, ADC), and package size against competing MPU/MCU products. Key features of this part include: 1 MB on-chip Flash (the '1025' designator indicates the Flash density in KB), 256 KB SRAM, 200 MHz maximum CPU clock, 12-bit 18 MSPS ADC with up to 45 analog inputs, USB 2.0 High-Speed OTG, two CAN 2.0b modules, an integrated Graphics Controller with parallel RGB output, and 8-/16-bit PMP. The 'T' suffix denotes Tape and Reel packaging, and the 'I/HF' industrial temperature grade ranges from -40C to +85C. Architecturally, the PIC32MZ1025DAL169T uses the MIPS32 microAptiv core with a 5-stage pipeline, hardware Multiply/Divide, DSP ASE, and a dedicated bus matrix that allows concurrent DMA between SRAM and peripherals. The integrated Graphics Processor (GPU) offloads line-draw, block-copy, and alpha-blend operations from the CPU, which is essential for driving TFT LCDs at QVGA/WQVGA without taxing the application thread. Typical applications include industrial HMI panels, home appliance user interfaces, automotive infotainment secondary displays, medical device GUIs, and low-cost point-of-sale terminals. The combination of on-chip 2D GPU and HS USB makes it well suited for connected, touch-driven products. When designing with this MCU, note that the LFBGA-169 package requires PCB micro-via technology (laser-drilled, ~0.1 mm pad pitch) and controlled-impedance routing for the parallel RGB bus; expect 4-6 layer stack-ups and follow Microchip's TB3137 PCB layout guidelines for fan-out and length-matching. The DAL variant does not support external DDR2 - if you need higher frame-buffer headroom for >WVGA panels, step up to the DAK sub-family. This page synthesizes distributor pricing, same-family drop-in alternatives, and PCB design notes that are not found in the manufacturer datasheet alone.

USD $8.30 재고 있음

PIC32MZ1025DAL176-I/2J

PIC32MZ1025DAL176-I/2J - 200MHz 1MB Flash MCU with Graphics Controller | Microchip

The Microchip PIC32MZ1025DAL176-I/2J is a high-performance 32-bit MIPS microAptiv microcontroller in the PIC32MZ DA family, engineered for MPU-class graphical user interface designs. It integrates 1MB of Flash and 640KB of SRAM, supports up to 32MB on-chip or 128MB external DDR2 DRAM addressable memory, and runs at 200MHz. Housed in a 176-pin LQFP exposed-pad package (20x20mm), this part combines a dedicated Graphics Controller, a Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog inputs, CAN, and Hi-Speed USB on a single die. A 32-bit microcontroller (MCU) is an embedded processor that integrates CPU core, memory, and peripherals into one IC. Within the broader taxonomy, this part belongs to the MIPS32 microAptiv family -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. The PIC32MZ DA series specifically targets GUI applications where designers want MPU-level graphics performance while keeping the programming model of an MCU, avoiding the complexity of a full Linux-capable application processor. Key features include: 200MHz core clock delivering up to 330 DMIPS and 1.5 DMIPS/MHz efficiency; 1MB Flash with prefetch cache for deterministic execution; 640KB SRAM; integrated 2D Graphics Processing Unit supporting HX8347, SSD1963, and other TFT controllers; Hi-Speed USB 2.0 with integrated PHY; CAN 2.0B module; 12-bit 18 MSPS ADC with up to 45 analog inputs (analog touch-screen friendly); and a wide operating voltage range centered at 1.8V core / 3.3V I/O. Architecturally, the part pairs a MIPS32 microAptiv core with a high-bandwidth multi-port SRAM subsystem, dual-port DDR2 controller, and dedicated Graphics Controller/Processor blocks. The DDR2 interface runs at 200MHz data rate with a 32-bit bus, delivering enough bandwidth for full-screen 24-bit color TFT rendering at typical WQVGA/WVGA resolutions without CPU intervention. The analog front-end (18 MSPS) and large ADC channel count make it a strong fit for sensor-rich HMI panels. Typical applications include industrial control HMI touch panels, automotive dashboard clusters, home automation touchscreens, medical instrument displays, point-of-sale terminals, and consumer GUI appliances. Its integrated graphics and DDR2 controller eliminate the need for an external graphics companion chip. Design considerations: the 176-LQFP exposed-pad requires adequate PCB copper pour on the die-attach pad for thermal dissipation; the DDR2 interface requires impedance-controlled routing; USB and CAN require proper ESD protection and common-mode chokes. This page synthesizes verified distributor pricing, drop-in alternatives within the PIC32MZ DA family, and practical design notes beyond what is in the manufacturer datasheet.

USD $5.50 재고 있음

PIC32MZ1025DAL176-V/2J

PIC32MZ1025DAL176-V/2J - 200MHz 32-Bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1025DAL176-V/2J is a 32-bit MIPS microAptiv PIC32MZ DAL graphics microcontroller running at 200 MHz with 1 MB of Flash and a 176-pin LQFP (20x20 mm) package. It is part of the PIC32MZ DA family that delivers MPU-like performance with MCU ease of design for graphical HMI applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The PIC32MZ DAL sits in the hierarchy of 32-bit microcontrollers, embedded processors, microprocessors, and integrated circuits. It belongs to the MIPS32 microAptiv core family, where microAptiv refers to a low-power, high-performance MIPS32 instruction-set core. The PIC32MZ DA series specifically targets GUI designs by combining a high-speed core with an integrated Graphics Controller and Graphics Processor. Key features include a 32-bit single-core MIPS32 microAptiv CPU at 200 MHz, 1 MB of Flash program memory organized as 1M x 8, on-chip 32 MB or 128 MB externally addressable DDR2 DRAM, an integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC module with up to 45 analog inputs, plus CAN and High-Speed USB. The V-temp grade supports the -40C to +105C operating range typical of industrial and automotive-grade systems. Technically, the device uses a Harvard-architecture core with separate Flash and RAM buses, a multi-layer AHB/APB fabric, and dedicated LCD/DDR2/GFX peripherals. The 176-pin LQFP exposes a wide peripheral set: high-speed USB, CAN, multiple UART/SPI/I2C, 12-bit ADC, analog comparators, timers, RTCC, PMP/EBIO for external graphics memory bus, and a parallel interface to external DDR2 DRAM. Typical applications include industrial HMI panels with TFT LCDs, point-of-sale terminals, medical patient monitors, automotive instrument clusters, and IoT gateways with rich graphical displays. The V-temp grade makes the part suitable for harsh-temperature environments including automotive and industrial enclosures. When designing with this part, allocate PCB space for the external DDR2 memory interface, follow Microchip's DDR2 layout guidelines for controlled-impedance routing, and confirm that the supply rails (VDD, AVDD, VDDIO) match the datasheet decoupling network. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the standalone Microchip product page.

USD $6.12 재고 있음

PIC32MZ1025DAL176T-I/2J

PIC32MZ1025DAL176T-I/2J - 32-bit MCU, 1MB Flash, 200MHz, LQFP-176

The Microchip Technology PIC32MZ1025DAL176T-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAL microcontroller with 1MB (1M x 8) Flash, 200 MHz CPU speed, and integrated Graphics Controller + Graphics Processor, packaged in a 176-pin LQFP (20x20 mm) with exposed pad. It delivers MPU-class performance with MCU-class development flow for GUI and HMI designs, targeting applications that demand 2D graphics, DDR2 memory expansion, USB, CAN, and rich analog peripherals on a single chip. What is a 32-bit microcontroller? A 32-bit microcontroller (MCU) is an embedded computing device whose data path, registers, and ALU are 32 bits wide, enabling higher throughput, larger address space, and richer software ecosystems than 8- or 16-bit MCUs. The PIC32MZ DA family sits in the broader hierarchy as: 32-bit microcontroller -> MIPS32 microAptiv core -> PIC32MZ DA family -> graphics-enabled MCU -> embedded semiconductor. These devices bridge the gap between traditional MCUs and application processors by combining deterministic real-time control with MPU-level peripherals such as large parallel external memory buses, LCD controllers, and 2D graphics engines. Key features include a 200 MHz core, up to 32MB or 128MB externally addressable DDR2 DRAM, integrated Graphics Controller and Graphics Processor for TFT LCD panels, 12-bit 18 MSPS ADC with up to 45 analog inputs, High-Speed USB, CAN, and a wide set of communication peripherals (UART, SPI, I2S, I2C). The 176-pin LQFP-EP package provides ample GPIO for parallel bus and TFT data lines, while still allowing hand-soldering and standard PCB assembly. The PIC32MZ1025DAL176T-I/2J leverages a 5-stage pipeline MIPS32 microAptiv core with DSP extensions, hardware multiply-accumulate, and a tightly coupled prefetch cache, supporting deterministic interrupt response for real-time HMI tasks. The integrated 2D Graphics Processor accelerates primitive rendering, blit, and alpha-blend operations so the CPU is not taxed when driving WVGA-class TFT displays. Typical applications include industrial HMI panels, medical patient monitors, point-of-sale terminals, smart home control displays, and automotive cluster/instrument displays. The device is also used in any GUI-heavy embedded product that benefits from DDR2 expansion to host full-color framebuffers and large fonts/icon sets. When designing with this part, allocate sufficient PCB area for the DDR2 routing (length-matched byte lanes, controlled impedance) and ensure the exposed thermal pad is soldered to a sufficient copper pour for thermal dissipation under heavy CPU + graphics load. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet - giving engineers and buyers a faster decision path than the Microchip product page alone.

USD $6.06 재고 있음

PIC32MZ1025DAL176T-V/2J

PIC32MZ1025DAL176T-V/2J - 200MHz MCU, 1MB Flash, 176-LQFP | Microchip

The Microchip Technology PIC32MZ1025DAL176T-V/2J is a 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, integrating 1 MB of Flash, 640 KB of SRAM, an integrated Graphics Controller, and a dedicated Graphics Processor in a 176-pin LQFP package measuring 20x20 mm. It operates at a maximum core clock of 200 MHz and supports up to 45 analog inputs through a 12-bit 18 MSPS ADC module, with an externally addressable DDR2 DRAM interface (32 MB or 128 MB). What is a 32-bit microcontroller? A 32-bit microcontroller (MCU) is a single-chip computer with a 32-bit data path, allowing it to process larger data words per instruction cycle than 8-bit or 16-bit devices. Within the broader semiconductor hierarchy, MCUs sit below microprocessors (MPUs) in RAM/Flash integration but above discrete logic ICs in functional density. The PIC32MZ DAL family targets MPU-like performance while keeping the deterministic interrupt response and ease-of-use of an MCU. Key features of the PIC32MZ1025DAL176T-V/2J include an integrated Graphics Controller with dedicated 2D GPU, hardware JPEG decoder, and TFT/LCD interface. The device offers 200 MHz CPU clock, 1 MB Flash, 640 KB SRAM, CAN, Hi-Speed USB 2.0 (480 Mbps), and 12-bit 18 MSPS ADC with up to 45 analog inputs. The V-temp grade (V in part number) supports -40C to +105C operation for industrial and harsh-environment designs. Architecturally, the PIC32MZ1025DAL176T-V/2J is built on the MIPS32 microAptiv core with separate instruction and data caches, a 9-stage pipeline, and DSP extensions. The integrated Graphics Controller offloads 2D rendering and JPEG decode from the CPU, enabling smooth GUI performance for HMI displays. The DDR2 interface allows a large frame buffer to be placed off-chip, simplifying the design of an eye-digit display with high color depth. Typical applications include industrial human-machine interface (HMI) panels, automotive infotainment and cluster displays, point-of-sale terminals, medical patient monitors, and graphics-enabled IoT gateways. Designers choose this part for integrated display driving without an external graphics controller. A critical design consideration for the LQFP-176 footprint is PCB escape: with 176 pins at 0.5 mm pitch, fan-out is challenging on a 4-layer board. Inner-layer power planes should be dedicated to the DDR2 interface to maintain signal integrity above 200 MHz. The integrated DDR2 PHY also requires matched trace lengths (per the datasheet) and proper termination. This page synthesizes distributor pricing, V/2J tape-and-reel variant details, and same-package drop-in PIC32MZ DAL alternatives not collated in the manufacturer datasheet, providing engineers with a single-source reference for sourcing and second-source decisions.

USD $8.55 재고 있음

PIC32MZ1025DAR169-I/6J

PIC32MZ1025DAR169-I/6J - 200MHz 32-bit MCU w/ Graphics | Microchip

The Microchip Technology PIC32MZ1025DAR169-I/6J is a 32-bit MIPS32 microAptiv PIC32MZ DAR microcontroller running at 200 MHz with 1 MB of Flash program memory, 640 KB of SRAM, and an integrated graphics controller, housed in a 169-ball LFBGA (11x11 mm) package. It is the DAR variant of the PIC32MZ Graphics family, offering an integrated 2D Graphics Processor Unit (GPU), a DDR2 DRAM controller for externally addressable memory, and a 12-bit ADC module rated at 18 MSPS with up to 45 analog inputs. A microcontroller (MCU) is a self-contained computer on a single chip that integrates a CPU core, program memory, data memory, and configurable peripherals. The PIC32MZ1025DAR169-I/6J sits in the 32-bit MCU hierarchy: MIPS32 microAptiv core -> PIC32MZ 32-bit MCU -> graphics-capable MCU -> embedded system-on-chip. Unlike a general-purpose MPU, it boots directly from on-chip Flash and requires no external memory to run, while the integrated DDR2 controller lets designers add 32 MB or 128 MB of external DRAM for frame buffers and rich GUI content. Key differentiators include the 200 MHz core delivering 330 DMIPS, the integrated graphics pipeline that offloads rendering from the CPU, 640 KB of on-chip SRAM, and a rich peripheral set spanning CAN, HS USB, Ethernet MAC, and multiple serial interfaces. The 169-ball LFBGA package provides high I/O density for display, memory, and connectivity interfaces in a compact 11x11 mm footprint. The device targets embedded GUI applications such as industrial HMI panels, medical instrumentation displays, automotive cluster and infotainment modules, and IoT gateways that require both real-time control and graphical output. Its 1.7 V to 1.9 V core supply and wide -40C to +85C industrial temperature range suit space-constrained, thermally challenging designs. When designing with this MCU, pay close attention to the DDR2 routing, the analog supply filtering for the 12-bit ADC, and the BGA land pattern and via-in-pad requirements. The integrated graphics controller reduces BOM cost by eliminating a discrete display controller, but requires careful frame-buffer bandwidth planning. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, sourcing, and layout decisions.

USD $13.10 재고 있음

PIC32MZ1025DAR169-V/6J

PIC32MZ1025DAR169-V/6J - 200MHz 32-bit MCU with DDR2 & GPU | Microchip

The Microchip Technology PIC32MZ1025DAR169-V/6J is a high-performance 32-bit MIPS-based microcontroller from the PIC32MZ Graphics (DA) family, featuring a MIPS32 microAptiv core running at 200 MHz, 1 MB of Flash, 640 KB of SRAM, and an integrated 2D Graphics Processing Unit (GPU) plus Graphics Controller, packaged in a 169-ball 11x11 mm LFBGA. The /6J suffix indicates a 169-ball LFBGA, while the V-temperature grade is -40C to +125C for industrial/automotive-style use cases. The part targets applications that demand MPU-like performance with MCU-level integration, including Human-Machine Interface (HMI) panels, industrial control dashboards, and graphics-rich embedded displays. What is a PIC32MZ DA-series microcontroller? It is a class of 32-bit MIPS microcontrollers from Microchip that combines a high-speed CPU, large memory, DDR2 DRAM controller, LCD graphics controller, GPU, 12-bit ADC, USB, CAN, and Ethernet peripherals into a single chip, enabling HMI designs without an external MPU. It sits in the taxonomy: PIC32MZ -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. Key features highlighted in the verified data include a 2 MB Flash maximum (1 MB on this -1025 variant), 640 KB of SRAM, stacked DDR2 with 32 MB or 128 MB external addressable DRAM support, integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog inputs, and on-chip HS USB plus CAN. The 200 MHz core delivers 252 DMIPS / 3.28 CoreMarks per MHz-class throughput for graphics and DSP tasks. The architecture uses a 32-bit MIPS microAptiv core with MMU and DSP ASE extensions, paired with a dedicated 2D GPU that accelerates block transfer, alpha blending, color conversion, image scaling, and text rendering. The DDR2 controller supports LPDDR and stacked-package DDR2, eliminating the need for an external memory bus. Peripherals include up to six UART, three or four SPI, five I2C, two CAN, HS USB 2.0 host/device/OTG, 10/100 Ethernet MAC, and a 12-bit 18 MSPS ADC. Typical applications are industrial HMI touch panels, automotive cluster/instrument displays, point-of-sale terminals with GUI, medical patient monitors, and any embedded GUI on TFT-LCD panels up to WVGA. The 169-ball LFBGA at 11x11 mm is the largest pin-count option in the family, maximizing GPIO for parallel RGB/8080 display interfaces. When designing with this part, allow sufficient BGA escape routing on the PCB, follow Microchip's DDR2 layout guide for the stacked-DDR2 variant, and use MPLAB Harmony 3 for peripheral and graphics stacks. The V-temperature grade requires junction-temperature monitoring if the device is mounted in a sealed enclosure with limited airflow. This page synthesizes distributor pricing, same-family drop-in alternatives, and design guidance not consolidated on the manufacturer datasheet landing page.

USD $9.60 재고 있음

하위 카테고리

제품 (32725)