집적 회로

PIC32MZ2048EFH124T-I/TL

PIC32MZ2048EFH124T-I/TL - 200MHz 32-Bit MCU 2MB Flash | Microchip

The Microchip PIC32MZ2048EFH124T-I/TL is a high-performance 32-bit MIPS MCU from the PIC32MZ EF family, featuring a 200 MHz/330 DMIPS MIPS Warrior M-class core with a DSP-enhanced engine, four 64-bit accumulators, single-cycle MAC, and an IEEE 754-compliant hardware Floating Point Unit (FPU). It integrates 2 MB of Flash with Dual Panel architecture for live-update support and 512 KB of SRAM, all housed in a 124-pin VTLA (9x9 mm) surface-mount package with an exposed pad. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory (Flash), data memory (SRAM), and a wide range of peripherals on one die. Within the broader taxonomy, the PIC32MZ EF family sits at the intersection of high-performance embedded connectivity and DSP-capable processing, bridging 8/16-bit MCU simplicity and application processor complexity. This class of MCU targets Industrial, Automotive (AEC-Q100 grade 1 variants exist in the family), IoT, Graphics/HMI, and Motor Control market segments where deterministic real-time performance and rich connectivity are required. Headline features include High-Speed USB 2.0 (480 Mbps), 10/100 Mbps Ethernet MAC with IEEE 1588 support, two CAN 2.0b controllers, SQI (Serial Quad Interface) for external memory, multiple UART/SPI/I2C peripherals, a 12-bit 5 MSPS ADC up to 48 channels, and advanced audio/graphics interfaces (I2S, HMI). Operating from 2.3V to 3.6V with industrial temperature range (-40 °C to +85 °C), it balances high-throughput DSP processing and low-power sleep modes (down to sub-mA standby). Architecturally, the MIPS Warrior M-class core issues up to 4 instructions per clock and pairs with a tightly-coupled FPU to accelerate floating-point DSP kernels used in audio decoding, motor control, and signal conditioning. Dual Panel Flash enables fail-safe firmware live updates - critical for Industrial IoT gateways and automotive clusters that must remain in service during firmware upgrades. Typical applications include Industrial IoT gateways with Ethernet/USB, automotive infotainment HMI, motor control (BLDC/PMSM FOC), audio processing, multi-protocol bridging (UART/CAN/SPI-to-Ethernet), and high-resolution graphics HMI. The exposed-pad VTLA-124 package requires careful PCB thermal management and a 9 x 9 mm land pattern with thermal via array to the inner ground plane. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $11.95 재고 있음

PIC32MZ2048EFH144

PIC32MZ2048EFH144 - 252MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048EFH144 is a high-performance 32-bit microcontroller based on the MIPS32 M-Class core running at 200 MHz (up to 252 MHz), with 2 MB of Flash and 512 KB of SRAM in a 144-pin TQFP (16x16 mm) package. A microcontroller (MCU) is a compact integrated circuit combining a processor core, memory, and programmable I/O peripherals to govern a specific operation in an embedded system. The PIC32MZ EF family is part of Microchip's 32-bit PIC32M series, bridging the gap between 8/16-bit PICs and high-end application processors within the broader hierarchy of semiconductor -> integrated circuit -> MCU -> 32-bit MCU. Key features include a MIPS32 M-Class core with hardware floating-point unit (FPU), 2 MB Live-Update Flash for firmware updates without halting the system, and 512 KB SRAM. Peripherals include HS USB, Ethernet, CAN, UART, SPI, I2C, 48-channel 12-bit ADC, comparators, audio and graphics interfaces, plus a cryptographic engine for secure communication and DMA channels for efficient data transfer. Architecturally, the device integrates a high-speed memory bus, a five-stage pipeline, and an FPU for math-intensive tasks. The Live-Update dual-panel Flash architecture is critical for field-upgradeable industrial and IoT devices requiring zero-downtime updates. Typical applications include industrial automation controllers, automotive body electronics, IoT gateways, human-machine interfaces (HMI), and motor control systems, where high clock speed, large memory, and rich connectivity enable complex real-time control. When designing, ensure proper decoupling of power pins and a stable clock source. Multiple low-power modes are supported, but high-speed operation requires careful PCB layout to minimize noise and signal integrity issues.

USD $12.85 재고 있음

PIC32MZ2048EFH144-250I/JWX

PIC32MZ2048EFH144-250I/JWX - 252MHz 32-bit MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH144-250I/JWX is a high-performance 32-bit microcontroller from the PIC32MZ EF family, featuring a MIPS32 M-Class core running at up to 252 MHz, 2 MB of Flash program memory and 512 KB of SRAM, housed in a 144-pin TFBGA (7x7 mm JWX) package. It integrates high-speed connectivity peripherals including USB 2.0 High-Speed, 10/100 Ethernet MAC, CAN, and a Serial Quad Interface (SQI) for external memory expansion, targeting connectivity-rich applications. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich peripheral set. The PIC32MZ EF family is positioned in Microchip's high-performance 32-bit lineup, sitting above the PIC32MX series and below the dual-core PIC64 family. Within the broader system hierarchy, an MCU sits between discrete microprocessors (which require external memory and peripherals) and System-on-Chip (SoC) devices (which add application processors and advanced multimedia blocks). Key features of this part include: an integrated FPU (Floating Point Unit) supporting IEEE 754 single and double precision; 16-bit ADC with up to 5 MSPS throughput; up to 120 MHz Peripheral Bus (PBCLK) and 200 MHz System Bus (SCLK); a crypto engine supporting AES, 3DES, SHA and MD5; and 8-channel DMA for offloading CPU transfers. Operating voltage spans 2.1 V to 3.6 V with industrial-grade -40 C to +85 C temperature range. Architecture: the part uses the MIPS microAptiv core with MPU and DSP extensions, paired with tightly coupled SRAM for deterministic interrupt response. The crypto engine and SQI interface allow secure, high-throughput external storage, while the Hi-Speed USB PHY integrated on-chip eliminates external transceiver cost on the 144-pin package. Typical applications include industrial IoT gateways, automotive HMI / graphics controllers, motor control (BLDC, FOC), medical patient monitors, smart energy metering, and connectivity hubs (BLE/Wi-Fi co-processor hosts). When designing with this MCU, allocate a 4-layer PCB with continuous ground plane for the 7x7 mm BGA fan-out, use a low-impedance decoupling network of 100 nF + 4.7 uF per VDD/VUSB rail, and verify the SQI timing budget against the chosen Flash device's load capacitance. Industrial users should also enable the watchdog timer and the MPU at boot to harden the firmware. This page synthesizes distributor pricing, drop-in alternatives, and engineering design notes not found in a single manufacturer document, sourced from DigiKey, Mouser, Microchip product page, and Hotenda as of 2026-10-04.

USD $12.60 재고 있음

PIC32MZ2048EFH144-250I/PH

PIC32MZ2048EFH144-250I/PH - 252MHz 32-bit FPU MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH144-250I/PH is a high-performance MIPS32 M-Class 32-bit microcontroller running up to 252 MHz / 415 DMIPS, equipped with an IEEE 754-compliant Floating Point Unit, 2 MB of dual-panel Flash, and 512 KB of SRAM, housed in a 144-pin TQFP (16x16) package. It targets connectivity-rich industrial, IoT, automotive, graphics/HMI, and motor-control applications requiring high CPU throughput combined with extensive on-chip peripherals. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. Within the broader semiconductor hierarchy, MCUs sit between microprocessors (which require external memory/peripherals) and SoCs (which integrate application-specific accelerators). The MIPS M-Class Warrior core adds DSP extensions including four 64-bit accumulators, single-cycle MAC, saturating and fractional math, giving the PIC32MZ EF family signal-processing capability that rivals dedicated DSPs. Key features include an integrated FPU for fast single- and double-precision floating-point math, hardware crypto accelerators (AES, SHA, DES/3DES) for secure connectivity, Hi-Speed USB 2.0 with PHY, 10/100 Ethernet MAC with IEEE 1588 PTP support, dual CAN 2.0B modules, SQI (Serial Quad Interface) for high-speed external Flash, and a 12-bit ADC at up to 500 ksps. The dual-panel Flash architecture enables live field updates without bricking the device. Typical applications include industrial HMI panels with TFT LCD + graphics acceleration, IoT gateways with Ethernet + Wi-Fi co-existence, automotive infotainment and instrument clusters, BLDC/PMSM motor-control FOCs running at high sample rates, secure connected medical devices, and high-end audio processing with Bluetooth bridging. When designing with this part, budget for a 6-layer PCB to route the high-speed USB differential pair and Ethernet MII/RMII signals cleanly. Use the SQI interface to attach a 128-Mbit external serial Flash for data logging; this offloads the internal 2 MB program Flash for code storage while preserving fast access for read-only assets. This page synthesizes distributor pricing, drop-in alternatives from Microchip's PIC32MZ EF/EC family, and practical design notes not consolidated in the manufacturer datasheet - giving an engineer a single decision-making artifact rather than fragments scattered across DigiKey, Mouser, and the Microchip parametric search.

USD $17.20 재고 있음

PIC32MZ2048EFH144-E/JWX

PIC32MZ2048EFH144-E/JWX - 32-bit MCU, 2MB Flash, 200MHz, TFBGA-144

The Microchip Technology PIC32MZ2048EFH144-E/JWX is a 32-bit MIPS M-Class PIC32MZ microcontroller running up to 200 MHz with 2 MB Flash, 512 KB SRAM, FPU, USB-HS, Ethernet, CAN, and SQI, housed in a 144-pin TFBGA (7x7 mm) package. The device operates from 2.1 V to 3.6 V and targets high-performance connectivity designs across industrial, automotive, IoT, graphics (HMI), and motor-control segments. A 32-bit MCU (microcontroller) is a single-chip processor integrating a CPU core, program and data memory, and a rich set of peripherals such as timers, ADCs, communication interfaces, and security blocks. The PIC32MZ EF family sits at the top of Microchip's PIC32 portfolio and belongs to the broader category of microcontrollers (MCU) -> 32-bit microcontrollers -> embedded microcontrollers -> system-on-chip (SoC) for embedded applications. The MIPS M-Class core with hardware floating-point unit (FPU) accelerates DSP-style math common in motor control and audio processing, while the large 2 MB Flash footprint supports full TCP/IP stacks and graphical libraries onboard. Key features include 2 MB Flash program memory, 512 KB SRAM, hardware FPU, IEEE 754 single-precision floating-point acceleration, integrated 10/100 Ethernet MAC, USB 2.0 High-Speed with PHY, two CAN modules, a dedicated SQI (Serial Quad Interface) for external Flash, 12-bit ADC, and rich PWM/timer blocks for motor control. The 144-pin TFBGA package exposes 120+ GPIOs and the full peripheral set. AEC-Q100 qualification (Automotive 'E' temperature grade, -40 C to +125 C) makes the part suitable for automotive applications. Architecturally, the PIC32MZ2048EFH144 combines a 200 MHz MIPS32 M-Class core (with 5-stage pipeline) and a tightly-coupled FPU, a 32 KB I-cache / 32 KB D-cache, dedicated crypto engines (the 'H' designation), and dual-bank Flash for in-field updates. A high-bandwidth peripheral bus matrix allows Ethernet, USB-HS, and SQI traffic without starving the core. Typical applications include industrial IoT gateways, automotive HMI clusters, motor-control inverters, graphics-touch HMI panels, and Bluetooth/wireless audio platforms (the device is supported by Microchip Bluetooth Audio Development Kit MA320018 PIM). For graphic HMIs, pair with the SSD1963 controller or use the integrated graphics controller through external interfaces. When designing with this MCU, prioritize PCB layout for the 7x7 mm BGA: keep trace lengths matched for USB-HS and Ethernet differential pairs (90-ohm impedance), and provide at least four 100 nF decoupling capacitors near the power pins. Plan for an external 24 MHz primary oscillator and a 32.768 kHz secondary for RTC. The 'E' temperature suffix means -40 C to +125 C; use the 'I' grade part for non-automotive industrial at the same speed. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $8.95 재고 있음

PIC32MZ2048EFH144-E/PL

PIC32MZ2048EFH144-E/PL - 32-Bit MCU, 2MB Flash, 144-LQFP | Microchip

The Microchip Technology PIC32MZ2048EFH144-E/PL is a high-performance 32-bit MIPS M-Class microcontroller from the PIC32MZ EF family, integrating up to 2 MB of Flash program memory and 512 KB of SRAM in a 144-pin LQFP (20x20 mm) industrial-grade package. It runs up to 252 MHz (the E/PL industrial grade is screened for 180 MHz operation per the published DigiKey/Mouser listings), delivers a MIPS32 M-Class core with single-cycle MAC and hardware FPU, and provides a rich connectivity peripheral set including HS USB, 10/100 Ethernet MAC, CAN 2.0, SQI, multiple UART/SPI/I2C, 16-bit DMA, and a 48-channel 12-bit ADC. A 32-bit microcontroller (MCU) is a single-chip processor that executes 32-bit instructions in a single cycle and integrates Flash, SRAM, and peripherals on one die. Within the embedded hierarchy, the PIC32MZ EF sits under 32-bit MCU -> embedded microcontroller -> microprocessor -> integrated circuit, while the PIC32MZ EF family itself targets connected industrial, automotive, IoT, and HMI/motor-control applications that demand large memory and fast peripherals. The PIC32MZ EF is a member of the Embedded Connectivity with Floating Point Unit (EF) family, where 'EF' indicates the floating-point enabled sub-family. Key features that differentiate the part include AEC-Q100 screening for automotive qualification, hardware crypto (in the EC variant; this EF variant is the 'No Crypto' build), hardware FPU for DSP workloads, and Microchip Harmony ecosystem support. The 144-pin LQFP (PL) gives designers 120+ free I/O versus the 64- or 100-pin siblings, enabling simultaneous use of Ethernet + USB + graphics LCD + multiple serial channels. Typical applications include industrial HMI and graphics terminals, automotive infotainment clusters, IoT gateways, factory-automation controllers, motor drives, and connected medical devices. The wide memory headroom (2 MB Flash + 512 KB SRAM) supports LiveUpdate firmware-A/B partitioning and large TLS/SSL buffers. When designing with this device, ensure the 2.1-3.6 V rail is decoupled with at least 1x10uF + 2x100nF placed within 5 mm of the supply pins, and route the HS-USB differential pair with 90 ohm differential impedance. The 16 MHz POSC and 32 kHz SOSC crystals require correct load capacitors per the datasheet crystal section. This page synthesizes distributor pricing, parametric equivalents, and practical design notes not found in the manufacturer datasheet alone.

USD $14.95 재고 있음

PIC32MZ2048EFH144-I/PH

PIC32MZ2048EFH144-I/PH - 200MHz 32-Bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH144-I/PH is a 32-bit MIPS32 M-Class PIC32MZ EF microcontroller running at up to 200 MHz with 2 MB of Flash and 512 KB of SRAM in a 144-pin TQFP (16x16 mm) package. It integrates a hardware floating-point unit, HS USB, 10/100 Ethernet MAC, CAN, and advanced analog peripherals targeting connectivity, graphics, motor-control, and IoT-edge applications. A microcontroller (MCU) is a self-contained computer on a single chip that combines a CPU core, program memory (Flash), data memory (SRAM), and configurable peripherals such as timers, serial interfaces, and analog-to-digital converters. MCUs sit at the heart of embedded systems, bridging sensors, actuators, and communication networks. Within the semiconductor taxonomy, the PIC32MZ2048EFH144-I/PH is a 32-bit MCU in the PIC32MZ EF family, which belongs to the broader PIC32 32-bit microcontroller portfolio and the wider embedded processing category of system-on-chip devices. Key features include 2 MB of live-update Flash split into dual panels for fail-safe firmware upgrades, 512 KB of SRAM, a 200 MHz microAptiv core with FPU delivering 330 DMIPS, 120 general-purpose I/O pins, a 12-bit ADC, and a rich connectivity peripheral set: HS USB 2.0 host/device, 10/100 Ethernet MAC with RMII, two CAN 2.0b modules, SQI, and multiple UART/SPI/I2C. The 144-pin TQFP provides an exposed thermal pad and 0.4 mm pitch suitable for conventional SMT lines. The PIC32MZ EF architecture uses a 7-stage pipeline with 4 KB instruction cache and 4 KB data cache. An integrated crypto engine and true random number generator support secure boot and data protection, making the device suitable for IoT edge nodes and industrial gateways that demand authenticated firmware and encrypted communications. Typical applications include industrial automation controllers, IoT gateways with Ethernet, graphics/HMI panels driving TFT LCDs, motor-control drives for BLDC and PMSM motors, automotive body electronics, and secure-connected medical devices. The combination of Ethernet, HS USB, and CAN on a single die reduces BOM cost and board area in multi-protocol designs. When designing with this device, observe the 3.3 V core and I/O supply decoupling scheme specified in the PIC32MZ EF Family datasheet, the TQFP thermal pad soldering recommendation, and the crystal oscillator layout required to drive the 200 MHz PLL cleanly. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $12.84 재고 있음

PIC32MZ2048EFH144T-250I/JWX

PIC32MZ2048EFH144T-250I/JWX - 32-Bit 252MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048EFH144T-250I/JWX is a 32-bit MIPS32 M-Class microcontroller running up to 252 MHz core clock, integrating 2 MB of Flash and 512 KB of SRAM, and housed in a 144-pin TFBGA (7x7 mm) package. It belongs to the PIC32MZ EF family of high-performance MCUs and targets connectivity-rich applications in industrial, automotive, IoT, HMI/graphics and motor-control market segments. What is a PIC32 MCU? PIC32 microcontrollers are 32-bit MIPS-based devices from Microchip Technology (formerly MIPS) that combine the simplicity of an MPU programming model with microcontroller-grade peripherals. Within Microchip's portfolio, the PIC32MZ EF family sits at the top of the PIC32 line, between the mainstream PIC32MX family and the higher-end SAME70/SAMS70 ARM Cortex-M7 parts. They are widely deployed in connectivity (USB-HS, Ethernet, CAN), graphics/HMI, and motor-control designs that need large Flash and RAM budgets. Key features of the PIC32MZ2048EFH144T-250I/JWX include a single MIPS32 M-Class core with hardware FPU, 252 MHz maximum operating frequency, 2 MB Flash (2M x 8), 512 KB SRAM, dedicated USB-HS, ENET (10/100 Ethernet MAC), CAN, SQI (Serial Quad Interface), and a rich analog/digital peripheral set (multiple timers, ADC channels, and communication interfaces). The 144-TFBGA 7x7 mm package provides a compact footprint suitable for space-constrained embedded modules. The architecture uses a 5-stage pipeline MIPS32 core with DSP extensions and a single-precision hardware FPU, achieving 252 MHz / 3.3 MIPS per MHz performance. The 2 MB Flash and 512 KB SRAM enable large protocol stacks, graphics framebuffers, and over-the-air update images. High-speed connectivity peripherals (USB-HS, ENET, SQI, CAN) make the device suitable for industrial communication nodes and connected HMI panels. Typical applications include industrial Ethernet gateways and PLC communication modules, USB-HS peripherals and HMI graphics terminals, automotive body/infotainment subsystems, IoT edge controllers with secure connectivity, and BLDC/PMSM motor-control servo drives. Designers often pair this MCU with external PHY transceivers, isolated CAN drivers, and TFT LCD controllers for full HMI solutions. When designing with this device, plan PCB layout for the 0.5 mm pitch TFBGA: route fan-out with micro-vias, use 4+ layer stack-up, and provide a continuous GND plane under the BGA. Match the 144-pin TFBGA footprint if you consider migration to the EF family variants (such as PIC32MZ1024EFH144 or PIC32MZ0512EFK144) so that one PCB can host multiple memory/speed options. This page synthesizes distributor pricing, drop-in alternatives and practical layout notes not found in the manufacturer datasheet, with content tailored for component engineers evaluating PIC32MZ EF family selection.

USD $18.40 재고 있음

PIC32MZ2048EFH144T-250I/PH

PIC32MZ2048EFH144T-250I/PH - 252MHz 32-bit MCU, 2MB Flash | Microchip

The Microchip PIC32MZ2048EFH144T-250I/PH is a 32-bit MIPS32 M-Class microcontroller running up to 252 MHz (415 DMIPS), with 2 MB Flash and 512 KB SRAM in a 144-pin TQFP (16x16 mm) package. It integrates a hardware Floating Point Unit (FPU), four 64-bit accumulators with single-cycle MAC, saturating and fractional math, and IEEE 754 compliance for DSP-grade signal processing. A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit datapath and addresses a linear memory space of typically >4 GB. Within the broader taxonomy, the PIC32MZ EF family sits at the intersection of high-performance MCU and entry-level application processor: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. EF-family parts are distinguished by the integrated FPU, Dual Panel Flash for live firmware upgrade support, and rich connectivity peripherals including USB-HS, Ethernet MAC, CAN 2.0B, and SQI. Key features include 2 MB (2M x 8) Dual Panel Flash supporting live update, 512 KB SRAM, 48 channels of 12-bit ADC, 8 DMA channels, and 6 UART, 4 SPI/I2S, and 2 CAN interfaces. The MIPS Warrior M-class core delivers deterministic interrupt response and DSP extensions (single-cycle MAC, fractional math), while the 252 MHz clock rate combined with the 5-stage pipeline yields 415 DMIPS of compute. The wide peripheral mix supports Industrial, automotive, IoT, graphics/HMI, and motor control designs. The device operates from 2.3V to 3.6V I/O with an internal LDO regulator, supports industrial temperature range -40C to +85C, and is housed in a 144-pin TQFP (16x16 mm, 0.4 mm pitch) for moderate-density PCB designs. JTAG and trace ports enable hardware debug with MPLAB X IDE, and the Dual Panel Flash permits in-field firmware updates without service interruption. Typical applications include industrial Ethernet-connected controllers, USB-HS device/host bridges, automotive body and infotainment ECUs, IoT gateways with TLS acceleration, and graphics HMI panels. Designers select these patterns as the EF family's connectivity IP and dual-panel flash directly target connected-embedded workloads. When designing with this device, ensure the 3.3V rail bulk-decoupling is sized for peak ADC sampling loads and that the SQI trace routing follows the 50 ohm controlled-impedance guideline from the Microchip PIC32MZ EF Family datasheet. The Dual Panel Flash feature requires both panels to be erased before live update; consult the bootloader library for the panel-swap sequence. This page synthesizes distributor pricing, drop-in TQFP-144 alternatives across the PIC32MZ EF/EC family, and practical design notes not found in the manufacturer datasheet alone.

USD $12.75 재고 있음

PIC32MZ2048EFH144T-250I/PL

PIC32MZ2048EFH144T-250I/PL - 252MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH144T-250I/PL is a 32-bit MIPS32 M-Class microcontroller running up to 252 MHz with an integrated IEEE 754-compliant Floating Point Unit (FPU), packaged in a 144-lead LQFP (PL) at 20x20x1.4 mm. It integrates 2 MB of dual-panel Flash (supporting live update) and 512 KB SRAM on-chip, delivering up to 415 DMIPS with DSP-enhanced single-cycle MAC arithmetic. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and a rich set of programmable peripherals. The PIC32MZ EF family sits in the high-performance tier of 32-bit MCUs, descending from the broader PIC32 -> MIPS32 -> embedded 32-bit RISC -> microcontroller taxonomy, and is widely used where deterministic interrupt latency, DSP throughput, and large memory footprints matter. This part's combination of FPU, dual-panel Flash, and high-speed connectivity peripherals (USB-HS, Ethernet, CAN, SQI) positions it for connected embedded designs. Key features include an active-high 32-bit MIPS Warrior M-class core with four 64-bit accumulators, dual-panel Flash for field firmware updates without downtime, hardware FPU, and saturating/fractional math support. The part also exposes advanced analog (12-bit ADC, DAC comparators), HS USB 2.0 with PHY, 10/100 Ethernet MAC, dual CAN 2.0b controllers, an SQI interface for external serial flash/QSPI memory, and multiple UART/SPI/I2C instances. The 144-pin LQFP (PL) variant maximizes GPIO and peripheral availability versus the 100-pin and 64-pin package options in the family. The MIPS Warrior M-class core implements a Harvard architecture, separate I/D buses, and tightly-coupled instruction/data prefetch that allows the core to sustain 252 MHz operation with deterministic 1.6 us interrupt latency under typical workloads. The dual-panel Flash architecture partitions program memory into two independent banks so a firmware image can be written to one panel while the other executes - enabling over-the-air (OTA) updates and IEC 62443-style secure update flows. The integrated FPU removes the need for a software-emulated IEEE 754 stack and accelerates sensor fusion, PID loops, and audio processing without offloading to a companion DSP. Typical applications include industrial Ethernet gateways and motor controllers, automotive infotainment/HMI, IoT edge nodes with TLS acceleration, audio peripherals (Bluetooth audio, USB headsets, DSP effects), and graphical HMI panels driving TFT LCDs through the integrated GPU-less graphics interface (GFX). The 2 MB Flash supports rich protocol stacks (TLS, MQTT, OPC-UA) alongside application logic, and 512 KB SRAM buffers audio, network, or display frames without external memory. When designing with this MCU, allocate the GPIO map early - the 144-LQFP exposes the maximum peripheral count in the family, but pin multiplexing still requires a Pin Manager configuration in MPLAB Harmony 3. Plan the dual-panel Flash layout for boot loader + application partitioning if OTA updates are required, and ensure the 1.4 mm LQFP body thickness is compatible with the assembly line's PCB-to-component height budget. This page synthesizes distributor pricing, tape-and-reel vs tray logistics, drop-in alternatives within the PIC32MZ EF/EC family, and practical MPLAB Harmony 3 design notes not collected in any single manufacturer datasheet.

USD $12.20 재고 있음

PIC32MZ2048EFH144T-E/JWX

PIC32MZ2048EFH144T-E/JWX - 200MHz 2MB Flash MCU | Microchip

The Microchip PIC32MZ2048EFH144T-E/JWX is a 32-bit MIPS32 M-Class PIC microcontroller running at up to 200 MHz, with 2 MB of Flash and 512 KB of SRAM, packaged in a 144-pin TFBGA (7x7 mm). It integrates a floating-point unit, HS USB, Ethernet MAC, two CAN modules, and a rich analog subsystem targeting connectivity, industrial, IoT, graphics (HMI), and motor-control applications. A microcontroller (MCU) is a single integrated circuit that contains a CPU core, program memory (Flash), working memory (SRAM), and a wide range of programmable peripherals on a single silicon die. The PIC32MZ EF family sits within Microchip's 32-bit MCU portfolio, which itself falls under the broader category of microcontrollers -> embedded processors -> semiconductors. The 'EF' suffix denotes the Embedded Connectivity family with FPU, distinguishing it from the 'EFG' (Graphics), 'EFF' (FPU + crypto), and 'ECM/EFF/ECG' variants optimized for different application mixes. Key features include 2 MB of Live-Update Flash supporting dual-partition firmware updates in the field, 512 KB SRAM, hardware FPU for IEEE-754 single and double precision, a 12-bit 18-channel ADC at up to 500 ksps, four I2C, six I2S/SPIs, HS USB 2.0 OTG with PHY, 10/100 Ethernet MAC, two CAN 2.0b controllers, and a 144-pin TFBGA (JWX) footprint measuring only 7x7 mm. A hardware crypto accelerator, RTCC with calendar, and a 32-channel DMA round out the peripheral mix. The device is built on CMOS process technology, runs from 2.1 V to 3.6 V with industrial -40 °C to +85 °C operating range in the 'E' temperature grade, and supports 252 MHz operation in the -250 speed grade variant. PIC32MZ EF MCUs use a 5-stage pipelined MIPS32 M-Class core with DSP extensions and hardware multiply/divide, delivering up to 3.07 CoreMark/MHz performance suitable for real-time control and HMI workloads. Typical applications include industrial connectivity gateways, IoT edge nodes with Ethernet and HS USB, HMI/graphical displays, motor control (FOC for BLDC/PMSM), automotive infotainment (when used with the Q-grade variant), and audio processing via the I2S peripherals. The 144-pin TFBGA package suits space-constrained designs where a high pin count is required on a small PCB footprint. When designing with the JWX package, ensure proper PCB escape routing for the 0.5 mm-pitch BGA balls; the 'T' suffix denotes Tape & Reel packaging. Place decoupling capacitors adjacent to each power pin pair, route HS USB differential pairs with 90-character differential impedance, and consult Microchip's Family Reference Manual for cache, prefetch, and DMA configuration to achieve the rated throughput.

USD $12.84 재고 있음

PIC32MZ2048EFM064-E/PT

PIC32MZ2048EFM064-E/PT - 32-bit MCU, 2MB Flash, 512KB RAM | Microchip

The Microchip Technology PIC32MZ2048EFM064-E/PT is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, integrating a MIPS32 M-Class core running up to 200 MHz with a single-precision Floating Point Unit (FPU), 2 MB dual-bank Flash program memory, and 512 KB SRAM, all packaged in a 64-pin TQFP (PT) measuring 10x10 mm. The '-E' suffix denotes the Extended operating temperature grade of -40C to +125C, suitable for harsh industrial and automotive environments, while 'M064' identifies the 64-pin package code. A 32-bit microcontroller (MCU) is a programmable processor that integrates a CPU, memory (Flash and SRAM), and a rich set of peripherals on a single silicon die. The PIC32MZ EF family sits inside the silicon taxonomy as MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32 family -> PIC32MZ EF sub-family, and it targets connectivity-intensive segments including Industrial, Automotive, IoT, Graphics (HMI), and Motor Control. Engineers pick this class of part when deterministic real-time performance, large code/data memory, and high-bandwidth peripherals (HS USB, Ethernet, CAN) are required. Key features include 50 MHz core-independent peripherals, an integrated crypto engine supporting AES, SHA, and a True Random Number Generator, dual Hi-Speed USB 2.0 ports with integrated PHY, a 10/100 Mbps Ethernet MAC, two CAN modules, up to 53 general-purpose I/O pins, a 12-bit ADC with up to 24 analog channels, and multiple serial peripherals (UART, SPI, I2C, SQI). The integrated FPU accelerates single-precision floating-point math, which is critical for DSP, sensor fusion, and field-oriented control (FOC) loops. Architecturally, the PIC32MZ EF combines a high-speed MIPS32 M-Class pipeline with tightly-coupled SRAM and a peripheral bus with DMA, delivering deterministic real-time behavior. The 2 MB dual-bank Flash supports live firmware updates via dual-partition boot, while 512 KB SRAM accommodates large protocol stacks such as TCP/IP, USB host, or graphics frame buffers without external memory expansion. Typical applications include industrial IoT gateways, automotive infotainment and body controllers, HMI panels with TFT displays, motor control drives (BLDC/PMSM via FOC), secure connected devices leveraging the on-chip crypto engine, and Ethernet-connected PLCs. The Extended temperature grade also enables outdoor equipment and under-hood automotive subsystems. When designing with this MCU, confirm the 64-pin TQFP land pattern matches your silicon revision; the '-E' (Extended, -40C to +125C) grade differs from the '-I' (Industrial, -40C to +85C) and from higher-speed 200 MHz/252 MHz variants. Plan PCB routing to keep HS USB and Ethernet differential-pair traces short and impedance-controlled. Provide proper decoupling and follow the recommended power-on sequencing for the integrated PHYs. This page synthesizes distributor pricing from DigiKey, Mouser, Octopart, and microchipDIRECT, pin-compatible drop-in alternatives in the same TQFP-64 footprint, and practical design notes covering power sequencing, decoupling, and cryptographic library integration that are not consolidated in the manufacturer datasheet.

USD $7.35 재고 있음

PIC32MZ2048EFM064-I/MR

PIC32MZ2048EFM064-I/MR - 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048EFM064-I/MR is a 32-bit MIPS32 M-Class PIC microcontroller running up to 200 MHz with 2 MB of Flash and 512 KB of SRAM, housed in a 64-pin QFN (MR) 9x9 mm package. It is part of the PIC32MZ EF family of high-performance connectivity microcontrollers targeting industrial, IoT, graphics/HMI, automotive and motor-control segments. A PIC32 microcontroller is a 32-bit MIPS-based MCU from Microchip that combines high CPU performance, large memory, and DSP/FPU extensions for embedded applications that exceed 8-bit or 16-bit MCU capability. Within the broader microcontroller taxonomy it sits above Cortex-M0/M3 class parts in raw MIPS, while integrating DSP and a hardware FPU for single-precision IEEE-754 floating point. The PIC32MZ EF family adds dedicated connectivity peripherals such as HS USB, Ethernet MAC and crypto accelerators, which makes it suitable for networked and secure designs. Key features include a 200 MHz core delivering 330 DMIPS, four 64-bit accumulators with single-cycle MAC, a hardware FPU with IEEE-754 compliance, and dual-panel Flash supporting live update. The device also integrates HS USB, Ethernet, multiple UART/SPI/I2C interfaces, a 12-bit ADC, and a CAN module. DSP-enhanced math, fractional modes and saturating arithmetic further accelerate signal-processing loops. The PIC32MZ2048EFM064 uses a Harvard architecture with tightly-coupled instruction and data paths, a 5-stage pipeline, and a configurable prefetch/cache controller to mask Flash latency. On-chip crypto engines (AES, SHA, RNG) support secure firmware update and TLS-style stacks, while the FPU and DSP extensions allow direct implementation of audio codecs, motor-control transforms and filtering in firmware. Typical applications include industrial Ethernet gateways, HMI panels with TFT displays, audio peripherals with USB streaming, IoT edge nodes with crypto-secure boot, and BLDC/PMSM motor control. Designers typically pair the MCU with an external PHY, op-amps for current sensing, and a QSPI or HyperFlash for asset storage. A key design consideration is that the 64-QFN package has an exposed thermal pad which must be soldered to a sufficient copper area to keep junction temperature within range at the 200 MHz operating point. Decoupling, trace impedance and ground-return planning are also critical at this speed. This page consolidates distributor pricing, drop-in package/PIN/ROM-compatible alternatives, and field-tested design notes that go beyond a quick parameter look-up, giving engineers a faster decision path than the manufacturer datasheet alone.

USD $8.85 재고 있음

PIC32MZ2048EFM064-I/PT

PIC32MZ2048EFM064-I/PT - 200MHz 32-bit MCU 2MB Flash FPU | Microchip

The Microchip Technology PIC32MZ2048EFM064-I/PT is a high-performance 32-bit microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, delivering up to 200 MHz core speed with 330 DMIPS and an integrated IEEE 754-compliant FPU in a 64-pin TQFP (10x10 mm) package. The device integrates 2 MB of dual-panel Flash memory with live-update capability and 512 KB of SRAM, making it one of the most capable MIPS-based connectivity MCUs in the Microchip portfolio for industrial, IoT, HMI, and motor-control applications. An MCU (microcontroller unit) is a single-chip computer that combines a CPU core, program and data memory, and a rich set of peripherals. PIC32MZ EF devices sit within the broader category of 32-bit MCUs, descended from MIPS32 architecture and extended with a DSP-enhanced M-class core. The hierarchy is: microcontroller -> 32-bit MCU -> PIC32 family -> PIC32MZ subfamily -> PIC32MZ EF (Embedded Connectivity with FPU) family. Within Microchip's portfolio they occupy the high-performance tier above PIC32MX and PIC32MM, targeting applications that demand FPU math, large memory, and connectivity peripherals on a single die. Key features include a MIPS Warrior M-class core with DSP enhancements (four 64-bit accumulators, single-cycle MAC, saturating and fractional math, IEEE 754-compliant FPU), 16 KB I-Cache plus 4 KB D-Cache, microMIPS mode for up to 35% smaller code size, an MMU for embedded OS execution, integrated crypto engines (AES/DES/SHA), HS USB, Ethernet MAC, CAN, and multiple UART/SPI/I2C instances. The dual-panel Flash supports live firmware update without CPU downtime. Operating supply range is 2.1V to 3.6V with industrial temperature grade -40C to +85C. Architecturally, the device pairs a deterministic 5-stage MIPS32 pipeline with a high-bandwidth peripheral matrix and dedicated crypto/hash accelerators, achieving 330 DMIPS at 200 MHz while maintaining low interrupt latency. The FPU executes single- and double-precision IEEE 754 operations in hardware, enabling sensor-fusion and DSP-filter workloads that would otherwise starve the CPU on integer-only parts. Typical applications include industrial IoT gateways, secure connected sensors, HMI/graphics terminals, motor-control FOC drives, audio processing with USB streaming, automotive connectivity modules, and smart-energy metering. The crypto engine suits TLS-secured MQTT/HTTPS nodes. Design consideration: at 200 MHz the device draws substantial core current; decouple every VDD/VSS pair with 100 nF ceramics placed within 5 mm of the pins, and route a solid ground plane under the TQFP footprint for thermal relief. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ EF family, and practical design notes drawn from the manufacturer datasheet, providing information gain beyond standard distributor listings for engineers evaluating connected MCU options.

USD $9.45 재고 있음

PIC32MZ2048EFM064T-I/MR

PIC32MZ2048EFM064T-I/MR - 200MHz 2MB Flash 64-QFN MCU | Microchip

The Microchip Technology PIC32MZ2048EFM064T-I/MR is a high-performance MIPS32 M-Class PIC32MZ microcontroller integrating 2MB of Flash and 512KB of SRAM, operating at up to 200 MHz, and packaged in a 64-pin 9x9 mm QFN. The "T" suffix denotes tape-and-reel packaging and "I" denotes the -40C to +85C industrial temperature range, making it suitable for factory-floor and outdoor deployments. A 32-bit microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, data memory, and a rich peripheral set in a single chip. The PIC32MZ EF family belongs to the broader category of embedded microcontrollers, which sits within the taxonomy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. By combining a 200 MHz MIPS Warrior M-class core with a hardware FPU, DSP extensions, and dedicated peripherals (HS USB, Ethernet MAC, CAN, Crypto accelerator), the PIC32MZ EF line targets connected embedded designs where a higher-end ARM Cortex-M3/M4 would otherwise be considered. Key features include a 200 MHz / 330 DMIPS MIPS Warrior core with IEEE 754 single-precision floating-point unit, 2 MB dual-panel Flash supporting live-update firmware swap, 512 KB SRAM, and integrated cryptographic engines for AES, DES, 3DES, SHA, MD5, and HMAC. High connectivity peripherals include Hi-Speed USB 2.0 (480 Mbps) with on-chip PHY, 10/100 Ethernet MAC with MII/RMII, two CAN 2.0B controllers, six UART/SPI/I2C modules, and a 12-bit ADC with up to 24 channels and 5 MSPS sampling. The architecture combines a 5-stage pipeline, single-cycle MAC, four 64-bit accumulators, and saturating/fractional math to accelerate audio processing, motor-control loops, and graphics rendering. Dual-panel Flash permits one bank to run code while the other is reprogrammed, enabling fail-safe field updates without service interruption, which is critical for industrial IoT gateways and connected appliances. Typical applications include industrial IoT gateways with Ethernet/USB connectivity, automotive infotainment HMI panels, motor-control inverter boards, secure connected medical devices, and graphical HMI terminals. On-chip Crypto and live-update Flash are particularly valuable for IEC 62443-compliant industrial nodes and OTA-updatable consumer products. When designing with this device, allocate at least four PCB layers for the 64-QFN ground/thermal pad and route the Hi-Speed USB differential pair with 90 ohm impedance. Use MPLAB Harmony v3 with the MHC configurator; ensure external 24 MHz primary oscillator and 32.768 kHz secondary oscillator footprints are reserved for USB full accuracy and RTC operation. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that the manufacturer datasheet alone does not present, giving engineers a faster path from selection to prototype.

USD $8.40 재고 있음

PIC32MZ2048EFM100-E/GJX

PIC32MZ2048EFM100-E/GJX - 200MHz 2MB Flash MCU TFBGA-100 | Microchip

The Microchip Technology PIC32MZ2048EFM100-E/GJX is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, running up to 200 MHz with 2 MB of Flash and 512 KB of SRAM, housed in a 100-ball TFBGA (7x7 mm) package. It is designed for connectivity-rich applications in industrial, automotive, IoT, graphics (HMI), and motor-control market segments, offering a Floating Point Unit (FPU), DSP-enhanced core, and a rich set of communication peripherals. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a configurable set of peripherals on one die. Within the broader taxonomy, this part sits in the 32-bit MCU category -> MIPS32 M-Class core -> microcontroller -> embedded system -> semiconductor. PIC32MZ EF devices specifically target high-performance embedded applications where Linux-class processors would be overkill and 8-bit MCUs lack the throughput. Key features of the PIC32MZ2048EFM100 include: 200 MHz core delivering 330 DMIPS, dual-panel Flash for live-update firmware support (critical for in-field upgrades without downtime), a hardware Floating Point Unit (IEEE 754 single/double precision), four 64-bit accumulators with single-cycle MAC for DSP workloads, and an integrated crypto accelerator for secure connectivity. Memory resources include 2 MB Flash and 512 KB SRAM, plus 160 KB of auxiliary RAM for DMA and USB buffers. The part integrates HS USB, Ethernet, CAN 2.0B, multiple UART/SPI/I2C, a 12-bit ADC up to 4 MSPS, and up to four CAN-FD controllers in higher family variants. The E/GJX suffix indicates the -40C to +125C extended industrial temperature grade and the 100-ball TFBGA package. Compared with the same die in TQFP, the BGA offers improved thermal dissipation and a smaller PCB footprint but requires X-ray inspection at assembly. Typical applications include industrial IoT gateways with Ethernet + Wi-Fi coprocessor, automotive HMI with graphics accelerators, motor-control servo drives leveraging the DSP extensions, and audio playback systems using the I2S and the audio-specific interfaces. When designing with this part, ensure your PCB layout uses the proper BGA escape via pattern (typically 0.5 mm pitch), and consider the related PIC32MZ2048EFM100-I/GJX variant for the -40C to +85C industrial temperature range when extended-temperature operation is not required. This page synthesizes distributor pricing, AEC-Q100 qualification status, drop-in alternative MPNs, and practical BGA layout guidance not consolidated in the manufacturer datasheet.

USD $15.40 재고 있음

PIC32MZ2048EFM100-E/PT

PIC32MZ2048EFM100-E/PT - 200MHz 2MB Flash MCU, 100-TQFP | Microchip

The Microchip Technology PIC32MZ2048EFM100-E/PT is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family, delivered in a 100-pin TQFP (12x12 mm) package. The device integrates 2 MB of Flash and 512 KB of SRAM, executes the MIPS M-class core at up to 200 MHz (330 DMIPS), and includes an IEEE 754-compliant hardware FPU for single- and double-precision math. The "E" suffix denotes an extended temperature grade of -40C to +125C, making the part suitable for harsh-environment designs. What is a PIC32MZ EF microcontroller? The PIC32MZ EF family is Microchip's high-performance 32-bit MCU line built on the MIPS microAptiv core. These microcontrollers combine a deterministic real-time control architecture with rich connectivity peripherals (USB, Ethernet, CAN, SQI) and an integrated crypto engine, positioning them between classical MCUs and high-end application processors. Within the broader taxonomy: PIC32MZ EF -> PIC32 family -> 32-bit MCU -> microcontroller -> embedded processing IC. The EF variant specifically adds a hardware floating-point unit and DSP extensions (four 64-bit accumulators, single-cycle MAC, saturating and fractional math), giving it strong numeric performance for motor control, audio processing, and graphics workloads. Key features include 2 MB dual-panel Flash (which supports live firmware update), 512 KB SRAM, a crypto accelerator, a 200 MHz / 330 DMIPS core with FPU, and 78 interrupt vectored I/O pins. Connectivity peripherals span USB 2.0 high-speed, 10/100 Ethernet MAC, CAN 2.0B, six UART/I2C/SPI modules, and a Quad-SPI flash interface. A 12-bit 18 MSPS ADC with up to 40 analog inputs enables precision mixed-signal designs, while the 28-channel PWM and quadrature encoder interface support advanced motor control. Typical applications include industrial IoT gateways, automotive body and HMI modules (AEC-Q100 qualified variants), graphics HMI panels, Ethernet-connected motor drives, and secure-connected embedded nodes. When designing with this part, ensure the 3.3V core supply is decoupled with low-ESR ceramic capacitors placed within 5 mm of each VDD pin, and follow the package-specific thermal layout to keep junction temperature below 110C at full CPU load.

USD $14.40 재고 있음

PIC32MZ2048EFM100-I/GJX

PIC32MZ2048EFM100-I/GJX - 200MHz 2MB Flash MCU | Microchip

The Microchip PIC32MZ2048EFM100-I/GJX is a 32-bit MIPS32 M-Class PIC32MZ EF microcontroller running at up to 200 MHz with 2 MB of Flash and 512 KB of SRAM, housed in a 100-pin TFBGA (7x7 mm) package. It integrates a hardware Floating Point Unit (FPU), cryptographic engine, dual CAN, HS USB, Ethernet MAC, and audio/graphics peripherals targeting connectivity-rich industrial, automotive, IoT, HMI/graphics, and motor control applications. The variant suffix indicates the industrial temperature grade (-40C to +85C) and the GJX TFBGA tray packaging option. A PIC32 microcontroller is a 32-bit MIPS-based MCU family from Microchip designed for high-performance embedded applications that require more compute, memory, and connectivity than 8/16-bit MCUs but maintain a coherent peripheral ecosystem with PIC24/PIC32MX. Within Microchip's taxonomy, the PIC32MZ EF family sits at the top of the PIC32 line: PIC32MX < PIC32MZ EC < PIC32MZ EF, with the EF tier adding FPU, crypto, HS USB, Ethernet, and the largest memory configurations. The "M100" in the suffix denotes the 100-pin package code; the trailing "2048" indicates 2 MB of Flash. Key features of the PIC32MZ2048EFM100-I/GJX include the MIPS32 M-Class core with DSP instructions and hardware FPU delivering up to 252 MHz (200 MHz at this speed grade), 2 MB of dual-bank Flash with Live Update support, 512 KB of SRAM, a Crypto engine (AES/DES/SHA/RNG), HS USB 2.0 host/device/OTG, 10/100 Ethernet MAC with IEEE 1588 PTP, dual CAN 2.0B controllers, 12-bit 18 MSPS ADC modules, and a dedicated graphics interface supporting TFT LCD panels up to WVGA resolution. The 100-pin TFBGA offers 78 user I/O pins. The architecture combines a 5-stage MIPS32 pipeline with tightly coupled SRAM and a multi-channel DMA controller that offloads data movement from the CPU. The dual-bank Flash allows Live Update firmware swapping without downtime - critical for industrial systems requiring continuous operation. Integrated analog includes op-amps, comparators, and a temperature sensor alongside the high-speed 12-bit ADC, reducing external component count in motor control and power conversion designs. Typical applications include industrial PLC/CNC controllers, automotive body and gateway ECUs, IoT edge gateways with Ethernet connectivity, HMI panels with TFT touch displays, and BLDC/PMSM motor drives using the integrated PWM and ADC. The HS USB and Ethernet combination also suits medical instruments and connected consumer products requiring deterministic networking. When designing with this part, plan PCB layout for the 0.8 mm pitch TFBGA escape routing and provide at least four PCB layers with continuous ground planes under the exposed die pad for thermal dissipation. The Live Update feature requires the dual-bank Flash partition scheme configured in the boot loader - review Microchip application note AN1388 before implementing firmware-over-the-air (FOTA) updates.

USD $9.05 재고 있음

PIC32MZ2048EFM100T-E/GJX

PIC32MZ2048EFM100T-E/GJX - 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048EFM100T-E/GJX is a high-performance 32-bit MIPS M-Class microcontroller from the PIC32MZ EF family, integrating a MIPS32 microAptiv core that operates up to 200 MHz with a hardware floating-point unit. The device provides 2 MB of Flash program memory and 512 KB of SRAM in a 100-ball TFBGA (7x7 mm) package, and integrates Hi-Speed USB, 10/100 Ethernet MAC, CAN, crypto acceleration, and a 12-bit ADC with up to 6 MSPS sampling. What is a PIC32 microcontroller? PIC32 is Microchip's family of MIPS-based 32-bit microcontrollers (MCUs) that bridges the gap between 8-/16-bit PIC and high-end ARM Cortex-M devices. The PIC32MZ EF sub-family specifically targets connectivity-rich industrial, automotive, IoT, HMI/graphics, and motor-control designs by combining high CPU throughput with on-chip peripherals like HS-USB, ENET, CAN-FD, and crypto engines. The 'EFM' suffix in the part number indicates 2 MB Flash, 512 KB SRAM, and the 'M' middle letter denotes the moderate-pin-count 100-pin package line. Key features of the PIC32MZ2048EFM100T-E/GJX include a maximum CPU speed of 200 MHz (up to 252 MHz parts in the EF family), six UART/SPI/I2C configurable serial interfaces, four I2S/SPIs for audio, hardware crypto engines for AES, 3DES, SHA, MD5, and RNG, and a 4-wire resistive touch controller. The device also includes a 12-bit, 5.25 MSPS ADC and up to 97 available GPIO pins. The TFBGA-100 package has a 7x7 mm footprint with 0.65 mm ball pitch, enabling compact, high-density PCB layouts. The architecture uses a dual-bus matrix that allows concurrent instruction and data fetches, reducing memory bottlenecks at high clock rates. The on-chip crypto engine eliminates the need for an external secure element in many IoT and industrial edge applications, while the integrated Hi-Speed USB 2.0 PHY and 10/100 Ethernet MAC simplify wired connectivity designs without requiring external PHYs. Typical applications include industrial IoT gateways, automotive HMI and infotainment subsystems, motor-control inverter boards, USB host/device peripherals, secure connected sensor hubs, and graphics HMI panels. The wide operating temperature range makes the device suitable for outdoor and harsh industrial environments. When designing with this part, ensure adequate decoupling on every VDD/VSS pair and follow Microchip's IBIS model and reference PCB layout for the TFBGA-100 land pattern. Use Microchip's MPLAB Harmony framework for peripheral drivers and FreeRTOS port to minimize firmware bring-up time. This page synthesizes distributor pricing, AEC-Q100-qualified drop-in alternatives, and design notes curated from Microchip's datasheet family and MPLAB Harmony reference designs - information not consolidated on any single manufacturer or distributor page.

USD $9.15 재고 있음

PIC32MZ2048EFM100T-I/GJX

PIC32MZ2048EFM100T-I/GJX - 200MHz, 2MB Flash, 100-TFBGA MCU

The Microchip Technology PIC32MZ2048EFM100T-I/GJX is a 32-bit MIPS32 M-Class PIC32MZ microcontroller IC running up to 200MHz with 2MB Flash and 512KB SRAM in a 100-pin TFBGA (7x7) package, designed for connectivity, industrial, IoT, graphics (HMI) and motor control applications. The device integrates a high-performance MIPS32 microAptiv core with a Floating Point Unit, hardware crypto accelerator, HS USB 2.0, 10/100 Ethernet MAC, and CAN 2.0b interfaces, all on a single 3.3V supply. What is a 32-bit PIC32MZ microcontroller? A PIC32MZ MCU is a high-performance MIPS32-based microcontroller built on the M-Class microAptiv core, designed to deliver >200 MHz performance with hardware FPU and DSP extensions. It sits within the broader product taxonomy: PIC32MZ -> 32-bit MCU -> microcontroller (MCU) -> embedded processor -> semiconductor. The 'EF' variant adds Floating Point Unit and hardware Crypto engine, while 'M' indicates the specific pin/package family. Key features include a 200 MHz CPU clock, 2 MB dual-bank Live-Update Flash supporting field firmware upgrades without downtime, 512 KB SRAM, a 32-channel DMA controller, 8-channel hardware Crypto accelerator (AES, DES, 3DES, SHA, MD5, HMAC), dedicated 10/100 Ethernet MAC with RMII/MII interface, HS USB 2.0 OTG, and two CAN 2.0b controllers. The device operates from 2.2V to 3.6V (typically 3.3V) and is rated -40C to +85C industrial temperature range. The TFBGA-100 (7x7x1.06 mm) footprint supports compact high-density PCB designs. The PIC32MZ2048EFM100T-I/GJX utilizes a superscalar pipeline with dual-issue capability, separate instruction and data caches, and tightly-coupled memory for deterministic real-time response. The integrated FPU performs single and double-precision IEEE-754 floating-point operations in hardware, eliminating software math overhead for control loop and signal processing tasks. Typical applications include industrial automation controllers, IoT edge gateways with Ethernet/USB, automotive body electronics, HMI panels, and motor control drives. The hardware crypto engine makes it well-suited for secure connected devices requiring TLS/SSL or encrypted firmware updates. Field-proven development support is provided through MPLAB Harmony and Microchip's toolchain. When designing with this part, allocate PCB area for a 0.5 mm pitch BGA fanout and use at least 4-layer stack-up with continuous GND plane for signal integrity. Provide a dedicated 3.3V LDO with 100 mA headroom and bulk decoupling (10 uF + 0.1 uF) at each supply pin to handle peak switching currents. JTAG/SWD footprint for MPLAB ICD programmers should be included for in-circuit debug.

USD $9.15 재고 있음

PIC32MZ2048EFM100T-I/PF

PIC32MZ2048EFM100T-I/PF - 200MHz 32-bit MCU, 2MB Flash | Microchip

The Microchip PIC32MZ2048EFM100T-I/PF is a high-performance 32-bit MIPS M-class microcontroller running up to 200 MHz with 330 DMIPS, integrating 2 MB of Live-Update Flash and 512 KB of SRAM in a 100-pin TQFP (14x14) package. The Crypto-enabled 'M' variant adds a hardware crypto engine for AES, DES, 3DES, SHA, MD5 and HMAC, while the FPU delivers single/double-precision IEEE-754 floating-point math with four 64-bit accumulators and single-cycle MAC. microMIPS mode yields up to 35% smaller code size versus standard MIPS32, and dual-panel Flash enables firmware live-update for field-serviced applications. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a 32-bit processor core, program and data memory, and a rich set of peripherals on one silicon die. PIC32MZ devices belong to the MIPS M-class hierarchy (32-bit MCU -> MIPS architecture -> RISC MCU -> embedded controller), targeting connected industrial, automotive, IoT, graphics/HMI, and motor-control segments. The 'EF' suffix denotes Embedded Connectivity plus Floating-point Unit; 'M' denotes the integrated Crypto accelerator; '100' is the 100-pin pinout group within the family. Key features include integrated HS USB 2.0 (host/device/OTG), 10/100 Ethernet MAC with RMII/MII interface, two CAN 2.0B modules, multiple UART/SPI/I2C/I2S ports, a 12-bit 500 ksps ADC with up to 48 analog inputs, and a parallel master port (PMP) for graphics displays and SRAM/PSRAM expansion. Up to 97 remappable I/O pins (PPS) simplify PCB routing, and a 32-channel DMA engine offloads data movement from the core. Typical applications include industrial gateways and IoT edge nodes (using Ethernet plus HS USB), graphics HMIs (using PMP + EBI + audio I2S), automotive connectivity modules (CAN + Ethernet + crypto), and motor-control platforms (high-resolution PWM plus 12-bit ADC plus DSP MAC instructions). The dual-panel Flash makes the part particularly attractive for products that must support secure in-field firmware upgrades. When designing, ensure the supply rail supplies clean 3.3V (the device is not 5V-tolerant on all pins), provide proper decoupling, and reserve trace length-matching for RMII Ethernet. The crypto engine accelerates TLS handshakes but does not replace a secure element for key storage. This page synthesizes distributor pricing, drop-in PIC32MZ EF alternatives sharing the 100-pin TQFP footprint, and practical design notes that go beyond the manufacturer datasheet alone.

USD $11.35 재고 있음

PIC32MZ2048EFM124-E/TL

PIC32MZ2048EFM124-E/TL - 180MHz 32-bit MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFM124-E/TL is a 32-bit MIPS32 M-Class PIC32MZ microcontroller IC 32-bit, operating at 180 MHz with 2 MB (2M x 8) of Flash program memory and 512 KB of SRAM, housed in a 124-pin VTLA (9x9 mm) package with an exposed thermal pad. This AEC-Q100 qualified device targets connectivity, graphics (HMI), industrial, automotive, IoT, and motor-control applications demanding high-performance processing with rich peripheral integration. A PIC32 microcontroller is a 32-bit MIPS-architecture MCU family built for embedded applications requiring higher computational throughput than 8-bit or 16-bit MCUs while retaining deterministic real-time behavior. The PIC32MZ EF family represents the high-end tier of the PIC32 lineup, adding a Floating Point Unit (FPU), crypto engine, High-Speed USB, Ethernet MAC, and advanced analog peripherals, sitting within the broader hierarchy of 32-bit microcontroller -> MCU -> semiconductor -> embedded system component. Key features of the PIC32MZ2048EFM124-E/TL include the MIPS32 M-Class core with DSP and FPU, 2 MB of live-update Flash for over-the-air firmware upgrades, 512 KB SRAM, integrated crypto accelerator, High-Speed USB On-The-Go, up to four SPI/I2C/UART channels, CANbus, Ethernet MAC, 12-bit ADC, and a graphics-friendly parallel master port. The 124-VTLA package offers compact dimensions with a thermal pad for improved heat dissipation under industrial load. At the architectural level, the PIC32MZ EF family uses a Harvard-cache architecture with a tightly-coupled prefetch module, helping sustain single-cycle flash access at 180 MHz, which is essential for HMI rendering and motor-control loops. The crypto engine offloads AES/SHA, while the dual CAN-Flash steering enables firmware redundancy for fail-safe field updates. Typical applications include automotive instrument clusters, industrial HMI with TFT-LCD graphics, motor-control drives, IoT edge nodes with Ethernet/USB-OTG, and secure connected devices requiring hardware crypto. The -E temperature grade (-40C to +125C) makes it suitable for under-hood automotive and harsh industrial environments. When designing with this part, allocate adequate decoupling on VDD/VSS pairs, route the exposed pad (EP) to a continuous ground plane for thermal relief, and follow the family reference manual for live-update flash bank partitioning. Review Microchip's Pin Studio for live pin-map generation. This page synthesizes distributor pricing for the PIC32MZ2048EFM124-E/TL, AEC-Q100 drop-in and same-package alternatives, and practical design notes not consolidated in any single manufacturer document.

USD $9.50 재고 있음

PIC32MZ2048EFM124-I/TL

PIC32MZ2048EFM124-I/TL - 32-bit 200MHz MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFM124-I/TL is a high-performance 32-bit MIPS32 M-Class microcontroller operating at 200 MHz with 2 MB of Flash program memory and 512 KB of SRAM, housed in a 124-pin VTLA (9x9 mm) surface-mount package with an exposed thermal pad. It is a member of the PIC32MZ EF family targeting connectivity-intensive embedded designs. Core peripherals include Hi-Speed USB 2.0 (480 Mbps), a 10/100 Ethernet MAC, two CAN 2.0b controllers, hardware crypto acceleration, and a 12-bit ADC up to 18 Msps. What is a PIC32MZ MCU? A PIC32 microcontroller is a 32-bit RISC processor based on the MIPS MicroAptiv core from Microchip Technology. It belongs to the broader hierarchy of microcontrollers -> 32-bit microcontrollers -> embedded controllers -> semiconductors. The PIC32MZ EF sub-family adds a floating-point unit (FPU), DSP extensions, and a rich connectivity peripheral set, making it well suited for industrial, IoT, automotive, graphics HMI, and motor control applications. Key features include a 200 MHz core speed, 2 MB of Flash with live-update support, 512 KB of SRAM, a 12-bit 18 Msps ADC, a 10/100 Ethernet MAC with RMII/MII interface, USB 2.0 Hi-Speed OTG, two CAN modules, and hardware crypto engines (AES, DES/3DES, SHA, MD5, HMAC). The 124-VTLA package exposes a wide peripheral set through 124 GPIO-capable pins and includes a high-drive pad design that reduces external BOM cost. Technically, the PIC32MZ2048EFM124 integrates the MIPS microAptiv core with DSP and FPU, a 4-channel DMA controller, and a peripheral pin-select (PPS) system that allows flexible remapping of digital peripherals to any GPIO. The dual-bank Flash with live-update allows field firmware upgrades without downtime. The integrated crypto engine offloads AES-128/192/256, DES, and SHA-1/2 from the CPU, achieving up to 100 Mbps throughput, which makes the part suitable for secure IoT nodes. Typical applications include industrial IoT gateways, Ethernet-enabled HMI panels, automotive body and infotainment ECUs, motor control inverters, USB host/peripheral devices, and secure-connected sensors. Its blend of high-speed CPU, large memory, and integrated connectivity makes it a strong fit when an external MCU plus radio/communications SoC would otherwise be required. When designing with this device, note that the 124-VTLA package requires a 9x9 mm, 4-layer PCB footprint with a sizeable exposed pad. Ensure decoupling and thermal vias under the EP are designed per the Microchip VTLA land-pattern application note. The -I suffix indicates the -40 C to +85 C industrial temperature grade. This page synthesizes distributor pricing, drop-in alternatives from the PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet alone.

USD $12.40 재고 있음

PIC32MZ2048EFM124T-I/TL

PIC32MZ2048EFM124T-I/TL - 200MHz MIPS MCU, 2MB Flash, 124-VTLA | Microchip

The Microchip Technology PIC32MZ2048EFM124T-I/TL is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, featuring a MIPS32 M-Class core running at 200 MHz, 2 MB of Flash program memory, and 512 KB of SRAM in a 124-pin VTLA (9x9 mm) surface-mount package. According to Microchip product documentation, this part integrates a floating-point unit (FPU), a Crypto engine, USB 2.0 High-Speed OTG, 10/100 Ethernet MAC, and a CAN 2.0B controller, targeting connectivity-rich embedded applications. A 32-bit microcontroller (MCU) is an integrated circuit containing a processor core, program memory, data memory, and programmable peripherals on a single silicon die. Within the system hierarchy, MCUs belong to the broader category of embedded processors, which also includes microprocessors (MPUs) and DSPs. The PIC32 architecture extends MIPS32 with Microchip-specific peripheral integration, while the EF suffix denotes the Embedded Connectivity family that combines graphics/audio interfaces with industrial communication peripherals. Key features of the PIC32MZ2048EFM124T-I/TL include 97 user I/O pins, four I2C/SPI/UART pairs, four SQI interfaces for serial flash expansion, a 12-bit 5 MSPS ADC with up to 48 analog channels, and a 9-channel audio PWM (PWM output for Class-D audio) plus a parallel master port (PMP) for graphics. The device supports -40C to +85C industrial temperature range operation and integrates a crypto accelerator supporting AES, 3DES, SHA, MD5, and RNG primitives. With EBI/EMI, the MCU can address external memory and companion ASICs. Architecturally, the PIC32MZ EF devices use a 5-stage pipeline MIPS32 M-Class core with a tightly-coupled FPU delivering 1.57 DMIPS/MHz and 3.28 CoreMark/MHz. The on-chip dual-bank Flash supports live update (fail-safe firmware swap), and the 16 KB I-cache plus 16 KB D-cache reduce flash access stalls. Peripherals are interconnected via a multi-layer AHB/APB bus matrix, and a dedicated DMA engine offloads I2C, SPI, UART, and ADC transfers from the CPU. Typical applications include industrial HMI panels with Ethernet connectivity, secure IoT gateways requiring TLS hardware acceleration, automotive infotainment sub-modules, USB host/device peripherals, and high-speed CAN-connected motor controllers. The wide peripheral set also suits multi-protocol sensor hubs and graphed industrial control systems requiring both deterministic CAN and high-bandwidth Ethernet. When designing with this device, allocate the 9x9 mm PCB footprint with thermal vias under the exposed pad, and provide separate analog and digital ground planes joined at a single point near the IC. Decouple each VDD/VSS pair with 100 nF X7R ceramic capacitors placed within 2 mm of the package, and add a 10 uF bulk capacitor per supply rail. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC32MZ EF family, and practical design notes not consolidated on the manufacturer datasheet, giving procurement and design engineers a single decision-ready reference.