집적 회로

PIC32MZ2048EFM144-E/JWX

PIC32MZ2048EFM144-E/JWX - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFM144-E/JWX is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, running up to 200 MHz with 2 MB of Flash and 512 KB of SRAM, housed in a 144-pin TFBGA (JWX) package sized 7x7 mm. A 32-bit microcontroller (MCU) is an embedded processor that integrates a CPU core, program memory, data memory, and peripherals on a single silicon die. The PIC32 family uses a MIPS32 microAptiv core with hardware multiply/divide and an optional FPU (Floating Point Unit), making it suitable for high-performance signal processing and connectivity applications. Within the broader MCU taxonomy, PIC32MZ EF belongs to the high-performance tier between Cortex-M4 and Cortex-M7 class devices, targeting graphics (HMI), industrial control, IoT, and motor-control segments. Key features include 2 MB dual-bank Flash for live firmware updates, 512 KB SRAM with optional ECC support, a Crypto engine (AES, DES, SHA, MD5, true random number generator), dual CAN 2.0B controllers, Hi-Speed USB 2.0 OTG, and a 12-bit 18-channel ADC with up to 1 MSPS sample throughput. Additional peripherals include 8 DMA channels, 9 general-purpose timers, two I2S/SPI audio channels, a parallel master port, and a segmented LCD controller. The architecture combines a 5-stage MIPS32 pipeline with tightly-coupled SRAM and dedicated bus matrix, delivering 3.28 CoreMarks/MHz efficiency. The -E temperature grade extends operation from -40C to +125C, suitable for industrial environments. The 144-pin TFBGA offers the largest pin count in the family, exposing maximum GPIO (120+), all communication interfaces, and the parallel port. Typical applications include industrial HMI panels, IoT gateways, motor control drives, automotive infotainment, secure connected devices, and graphics controllers. The crypto engine enables TLS/DTLS acceleration for embedded security. When designing with this MCU, place 0.1 uF decoupling capacitors within 3 mm of every VDDCORE/VDDIO pin pair and route traces at 50 ohm controlled impedance for Hi-Speed USB. The -E/JWX variant operates at up to 200 MHz (versus 250 MHz on -250 suffix parts), trading top frequency for lower cost in industrial temperature applications. This page synthesizes Microchip datasheet parameters, drop-in alternative PIC32 and competitor equivalents, and practical design guidance not always present in the manufacturer documentation, helping engineers compare and select the right PIC32MZ derivative for each design.

USD $12.80 재고 있음

PIC32MZ2048EFM144-E/PL

PIC32MZ2048EFM144-E/PL - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFM144-E/PL is a high-performance 32-bit MIPS32 M-Class microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, featuring a 200 MHz core, 2 MB of dual-panel Flash for live update support, and 512 KB SRAM in a 144-pin LQFP (20x20 mm) package. It operates from 2.3V to 3.6V, integrates an IEEE 754-compliant FPU and a Crypto engine, and targets connectivity-rich industrial, automotive, IoT, graphics (HMI), and motor-control applications. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance CPU core, on-chip memory, and a rich set of peripherals such as ADC, PWM, USB, Ethernet, and CAN. The PIC32MZ EF family extends this concept with a MIPS Warrior M-class core that delivers up to 330 DMIPS at 200 MHz, four 64-bit accumulators for DSP operations, single-cycle MAC, saturating and fractional math, and hardware floating-point support. Positioned above 8/16-bit MCUs and below application processors, PIC32MZ EF parts are widely used where deterministic real-time response, large code footprint, and connectivity must coexist on one die. Key features of the PIC32MZ2048EFM144-E/PL include 2 MB dual-panel Flash for live firmware updates without downtime, 512 KB SRAM, HS USB 2.0 with integrated PHY, 10/100 Ethernet MAC with hardware cryptography acceleration, multiple CAN modules, a 12-bit ADC up to 18 MSPS, and a graphics-friendly parallel interface for HMI panels. The device also provides multiple SPI, I²C, and UART channels, plus dedicated crypto engines for AES, DES, and SHA, enabling secure connected designs. The 144-pin LQFP package offers a generous I/O count, making the part suitable for complex pin-intensive applications. The MIPS microAptiv core provides low interrupt latency and deterministic execution, while separate data/instruction paths improve throughput. Combined with a 1.6 mA/MHz typical run-mode current, this MCU is well suited for connected embedded systems that require both computational headroom and low standby draw. Typical applications include industrial Ethernet gateways, automotive infotainment controllers, HMI panels with TFT displays, motor-control FOC drives, IoT edge nodes, and high-performance sensor hubs. The dual-panel Flash and Crypto engine also suit secure firmware-over-the-air (FOTA) updates in connected field equipment. Designers should plan for adequate decoupling (100 nF plus 4.7 µF bulk), use all VDD/VSS pairs for low-impedance power delivery, and ensure traces to the integrated PHY follow 90 Ω differential impedance. Boot-time and FOTA flows should be validated against the dual-panel Flash behavior described in the Microchip PIC32MZ EF family datasheet. This page synthesizes distributor pricing, drop-in Microchip same-package alternatives, and practical design notes that go beyond the manufacturer datasheet, helping engineers evaluate device components, family members, and replacements on a single screen.

USD $12.40 재고 있음

PIC32MZ2048EFM144-I/PH

PIC32MZ2048EFM144-I/PH - 200MHz 32-bit MCU, 2MB Flash, TQFP-144

The Microchip Technology PIC32MZ2048EFM144-I/PH is a high-performance 32-bit MIPS32 M-Class microcontroller running at up to 200 MHz with an integrated Floating Point Unit (FPU), 2 MB of Flash and 512 KB of SRAM, housed in a 144-pin TQFP (PH) package with industrial -40C to +85C temperature range. A 32-bit microcontroller (MCU) is an embedded computing device that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals onto a single silicon die. Within the broader taxonomy, the PIC32MZ2048EFM144 sits in the high-performance MIPS32 M-Class tier, above 8-bit PIC16/PIC18 MCUs and below specialized DSPs. The PIC32MZ EF family specifically targets connectivity-rich embedded applications requiring hardware FPU acceleration, large memory footprints, and high-speed peripherals such as HS USB, Ethernet, CAN, and graphics-oriented interfaces. Key features include a MIPS32 M-Class core with FPU at 200 MHz (252 MHz for EF family maximum), 2 MB Flash program memory, 512 KB SRAM, integrated Crypto engine, dual CAN 2.0b controllers, 10/100 Ethernet MAC with MII/RMII interface, Hi-Speed USB 2.0 OTG, and a high-performance 12-bit ADC with up to 18 MSPS sampling. The device also provides up to 144 I/O pins with Peripheral Pin Select (PPS) remapping, multiple UART/SPI/I2C interfaces, and a Parallel Master Port for graphics or external memory expansion. Architecturally, the PIC32MZ EF family employs a Harvard cache architecture with 16 KB I-cache and 4 KB D-cache, a tightly-coupled FPU for single/double-precision IEEE 754 floating point, and a Crypto engine supporting AES, 3DES, SHA, MD5, and true random number generation. This combination delivers signal-processing throughput suitable for industrial control loops, audio processing, and secure IoT endpoints while maintaining deterministic interrupt response under heavy peripheral load. Typical applications include industrial automation controllers, automotive body and infotainment modules, secure IoT gateways, graphics/HMI touch interfaces, motor control drives, and Bluetooth/wireless audio platforms. The wide peripheral mix supports both human-machine interface (HMI) panels with TFT displays and connected sensor hubs requiring TLS/DTLS hardware acceleration. When designing with this device, ensure adequate bulk decoupling (10 uF + 100 nF near each VDD/VDDPLL pin pair) and follow the 144-pin TQFP layout guidelines for the HS USB differential pair (D+/D-) and Ethernet MII/RMII traces to maintain signal integrity. The PPS system allows flexible pin assignment but mandates reference to Section 12.4 of the datasheet for input/output remap restrictions. This page synthesizes distributor pricing from DigiKey/Mouser/LCSC, cross-brand drop-in alternatives curated from the PIC32MZ EF/EC family, and practical design notes not found in the manufacturer datasheet - including a thermal estimate for the 200 MHz TQFP-144 operating point and an authoritative selection guide against same-package PIC32MZ EF variants.

USD $11.45 재고 있음

PIC32MZ2048EFM144-I/PL

PIC32MZ2048EFM144-I/PL - 200MHz 32-bit MCU 2MB Flash 144-LQFP | Microchip

The Microchip Technology PIC32MZ2048EFM144-I/PL is a high-performance 32-bit microcontroller based on the MIPS32 M-Class core, delivering 200 MHz / 330 DMIPS / 3.28 CoreMark/MHz performance with an integrated Floating Point Unit (FPU). It ships with 2 MB of dual-panel Live-Update Flash and 512 KB of SRAM in a 144-pin LQFP (20x20 mm) package, operating across an industrial temperature range of -40C to +85C. What is a PIC32 microcontroller? The PIC32 family is Microchip's line of 32-bit MIPS-based microcontrollers (MCUs), positioned hierarchically as: MCU -> 32-bit MCU -> PIC32 -> PIC32MZ EF family. The PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family is optimized for applications requiring high CPU throughput combined with rich connectivity (Ethernet, HS USB, CAN) and advanced peripherals such as crypto engines, graphic interfaces, and audio bridges. Key features of the PIC32MZ2048EFM144 include: 2 MB of Flash with Live-Update dual-panel architecture enabling field firmware upgrades without downtime, 512 KB SRAM, integrated FPU for IEEE 754 single-precision math, hardware crypto engine, 12-bit 40 MSPS ADC, and graphics/audio peripherals. The on-chip Memory Protection Unit (MPU) and dual-partition Flash support robust, secure firmware over-the-air (FOTA) updates. Technically, the PIC32MZ EF uses a 5-stage MIPS32 M-class pipeline with branch prediction and tightly-coupled prefetch buffers. The 2 MB Flash is organized into two 1 MB panels that allow one panel to be updated while the other executes code. A dedicated DMA controller with multiple independent channels offloads data movement between memory, ADC, USB, and Ethernet MAC, keeping the core free for application logic. Typical applications include industrial control with Ethernet connectivity, graphics HMI displays with TFT/LCD panels, automotive telematics and infotainment peripherals, IoT edge gateways, USB-audio interfaces, and motor-control BLDC/PMSM drives. The wide peripheral set and ample RAM also suit it for protocol bridging and secure connectivity nodes. When designing with the PIC32MZ2048EFM144, ensure 100 nF+10 uF decoupling is placed within 5 mm of every AVDD/VDD pin, and that the high-speed USB and Ethernet traces are routed with controlled 90 ohm differential impedance. The Live-Update Flash feature requires careful linker-script planning for the dual-panel layout. This page synthesizes distributor pricing, drop-in PIC32MZ EF family alternatives, design notes from the manufacturer datasheet, and Application Note references such as AN2585 and AN2568, providing practical engineering guidance not found on a stock distributor page.

USD $13.40 재고 있음

PIC32MZ2048EFM144T-E/JWX

PIC32MZ2048EFM144T-E/JWX - 180MHz 32-bit MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFM144T-E/JWX is a high-performance 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, running at 180 MHz with 2 MB of Flash and 512 KB of SRAM in a 144-ball TFBGA (7x7 mm) package. The PIC32MZ EF family targets connectivity-rich applications in industrial, automotive, IoT, graphics/HMI, and motor control market segments, integrating a floating-point unit, audio and graphics interfaces, Hi-Speed USB, Ethernet, advanced analog, crypto engine, and CAN. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for program code and SRAM for runtime data), and a rich set of peripherals (ADC, timers, communication controllers, GPIO) on one die. Within the semiconductor taxonomy, microcontrollers sit under microprocessors and embedded processors; the PIC32MZ EF specifically uses the MIPS32 M-Class core, which is a Harvard-architecture RISC CPU with hardware multiply/divide and an optional DSP ASE. Compared with simple 8-bit MCUs, a 32-bit MCU like the PIC32MZ EF offers much higher throughput per MHz, larger addressable memory, and richer peripheral integration for networked or graphically demanding products. Key features of the PIC32MZ2048EFM144T-E/JWX include 2 MB (2M x 8) of Flash program memory, 512 KB of SRAM, and 144 GPIO-capable pins on a compact 7x7 mm TFBGA. The device integrates a 12-bit ADC module, multiple DMA channels, nine timers, two watchdog timers, two comparators, and a Real-Time Clock (RTC). Connectivity is extensive: Hi-Speed USB, 10/100 Ethernet MAC, CAN, multiple UART/SPI/I2C, and parallel master port for graphics displays. The crypto engine accelerates AES, DES, and SHA hashes for IoT security. Operating temperature is -40C to +125C (automotive/extended grade, indicated by the 'E' in the part number). At 180 MHz the MIPS M-Class core executes 180 MIPS with single-cycle Flash access and prefetch buffer, while the FPU provides hardware single-precision floating-point. The 144-ball TFBGA package provides fine-pitch high-I/O connectivity in a small 7x7 mm footprint, well suited to multilayer PCBs. Power domains and low-power Run/Idle/Sleep modes allow trade-offs between active MIPS and quiescent draw for battery-aware designs. Typical applications include industrial IoT gateways, automotive body and HMI controllers, graphics-touch HMIs with TFT displays, motor control BLDC/PMSM drives, audio processing systems with USB streaming, and secure connected devices needing on-chip encryption. This variant's tape-and-reel packaging and -40C to +125C temperature grade suit high-volume, harsh-environment manufacturing. When designing with this MCU, allocate sufficient decoupling (typically 100 nF per VDD pin and bulk 4.7 uF per rail), follow the TFBGA escape pattern for the 7x7 mm BGA with microvia stack-ups, and verify firmware against the PIC32MZ EF errata. The 'E' temperature grade supports industrial and automotive deployments; choose the 'I' grade (200 MHz variants) where highest performance at 125C is required.

USD $9.20 재고 있음

PIC32MZ2048EFM144T-I/JWX

PIC32MZ2048EFM144T-I/JWX - 200MHz 32-Bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFM144T-I/JWX is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 200 MHz with 2 MB Flash and 512 KB SRAM, housed in a 144-pin TFBGA (7x7 mm) package. It integrates a Floating Point Unit (FPU), crypto engine, CAN, HS USB, Ethernet MAC, and advanced analog peripherals including a 12-bit ADC, targeting connectivity-rich applications. Operating from 2.1 V to 3.6 V with industrial temperature grade (-40C to +85C), it is supplied on Tape & Reel. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and peripherals onto one die. The PIC32MZ EF family sits at the high end of Microchip's 32-bit MIPS portfolio - MIPS32 M-Class core -> 32-bit MCU -> embedded microcontroller -> integrated circuit -> semiconductor. EF devices add Floating Point Unit, crypto accelerator, and CAN, distinguishing them from EC (Ethernet + CAN) and EG (Graphics-oriented) variants within the same die family. Key features of this part include: 200 MHz maximum CPU clock with 252 MHz versions available in the -250I suffix family, 120 user I/Os, 8 DMA channels, 9 timers, 2 watchdog timers, and communication interfaces (5x I2C, 3x SCI/UART, SPI, CAN, HS USB, Ethernet). The 12-bit ADC delivers up to 28 Msps, sufficient for motor-control and audio front-ends. Hardware crypto acceleration supports AES, DES, SHA, and RNG, offloading secure boot and TLS handshakes from the core. Typical applications include industrial HMI panels, IoT gateways, automotive body and infotainment ECUs, BLDC/PMSM motor controllers, and secure-connected medical devices. The wide peripheral set and crypto engine make it a strong choice for edge devices that require both deterministic real-time control and authenticated connectivity. The Ethernet MAC and HS USB enable bridged IP/USB designs without an external PHY companion for USB. When designing with this MCU, allocate at least one decoupling capacitor per supply pin and place the 16 MHz primary oscillator crystal within 8 mm of the OSC1/OSC2 pins to keep EMI low. The TFBGA-144 requires microvia or via-in-pad PCB technology for reliable assembly; design review with the contract manufacturer is recommended before committing to layout.

USD $11.62 재고 있음

PIC32MZ2048EFM144T-I/PH

PIC32MZ2048EFM144T-I/PH - 200MHz MIPS32 MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFM144T-I/PH is a 32-bit MIPS32 M-Class PIC32MZ microcontroller running up to 200 MHz, integrating 2 MB of Flash and 512 KB of SRAM in a 144-pin TQFP (PH) package with FPU, Crypto, CAN, HS USB and Ethernet peripherals. The 'T' suffix indicates Tape & Reel packaging, and the 'I' suffix denotes the industrial temperature grade of -40C to +85C, making it suitable for harsh embedded environments. A 32-bit MCU (microcontroller) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals. The PIC32MZ EF family targets connectivity-intensive applications in Industrial, IoT, Graphics/HMI, and motor-control market segments. Within the broader taxonomy, this device sits as: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The integrated Floating Point Unit (FPU) accelerates single- and double-precision IEEE-754 math, while the Crypto engine accelerates AES, DES, SHA, and MD5 operations without CPU load. Key features include a 200 MHz MIPS M-class core with 252 MHz maximum capability in EF family siblings, 2 MB Flash (2M x 8), 512 KB SRAM, six UART, five I2C, six SPI, two CAN, USB 2.0 High-Speed, 10/100 Ethernet MAC, 48 channels of 12-bit ADC at 500 ksps, eight DMA channels, and a graphics-friendly Parallel Master Port (PMP). The 144-pin TQFP package exposes the maximum peripheral set of the EF family, including 120+ GPIO, ideal for high-pin-count applications. Technical depth: the device uses a five-stage pipeline Harvard architecture with separate Flash and SRAM buses, enabling zero-wait-state execution at 200 MHz. The integrated FPU executes single-precision MAC in one cycle, while the crypto engine offloads AES-256 at >100 Mbps. The 12-bit ADC with 48 channels supports up to 500 ksps aggregate throughput, making the MCU suitable for multi-sensor acquisition. Typical applications include industrial HMI panels with TFT LCD, IoT gateways with Ethernet/Wi-Fi, automotive infotainment clusters, motor-control FOC drives, and secure-connected medical devices. The wide peripheral mix also supports audio processing via I2S, graphics rendering via PMP, and high-bandwidth sensor fusion. Design consideration: decoupling requires 0.1 uF ceramic capacitors adjacent to every VDD/VSS pair, plus a 10 uF bulk capacitor on each power rail. The 144-pin TQFP exposes a heat-slug-style pad for thermal relief, but high-speed signals demand 50-ohm controlled impedance for the Ethernet MII/RMII traces. This page synthesizes distributor pricing, drop-in TQFP-144 alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a faster path to BOM decisions.

USD $10.85 재고 있음

PIC32MZ2048EFM144T-I/PL

PIC32MZ2048EFM144T-I/PL - 200MHz 2MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ2048EFM144T-I/PL is a high-performance 32-bit MIPS M-Class microcontroller from the PIC32MZ EF family, integrating 2 MB of Flash program memory alongside 512 KB of SRAM in a 144-pin LQFP (PL) package measuring 20x20 mm. It features a MIPS32 M-Class core running at 200 MHz, hardware Floating Point Unit, and a rich connectivity peripheral set including HS USB, dual CAN-FD, Ethernet MAC, and multiple UART/SPI/I2C ports for industrial, IoT, automotive, and graphics applications. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, program memory (Flash), data memory (SRAM), and specialized peripherals on a single die. PIC32MZ EF MCUs occupy the high-performance tier of the 32-bit MCU hierarchy, positioned above 8-bit/16-bit MCUs and below application processors. The EF family adds crypto acceleration, CAN-FD, and Ethernet, making it suitable for connected embedded applications demanding deterministic real-time response. Key features of the PIC32MZ2048EFM144T-I/PL include 2 MB of Flash with Live-Update dual-partition capability, 512 KB SRAM, integrated crypto engine, audio I2S/SSI and graphics-friendly peripherals (parallel camera/Display HX8347 interface), 12-bit ADC up to 5 Msps, and a 200 MHz MIPS core with DSP extensions. The wide -40C to +85C industrial operating range supports automotive and industrial environments while AEC-Q100 grade 1 qualification is available on selected EF family members. Architecturally the device couples a 6-stage MIPS32 M-class pipeline with FPU and DSP ASE instructions, allowing efficient execution of audio codecs, FFTs, and control loops. The Peripheral Pin Select (PPS) subsystem allows most peripherals to be remapped to a wide range of I/O pins, simplifying PCB layout. An 8-channel DMA controller offloads data movement between peripherals and memory, enabling high-bandwidth audio streaming and graphics framebuffer updates without CPU intervention. Typical applications include industrial IoT gateways with Ethernet and TLS acceleration, Human-Machine Interface (HMI) controllers with parallel TFT LCD drive, automotive body and infotainment subsystems, audio processing nodes with S/PDIF or I2S, and secure connected sensors using on-chip crypto for TLS 1.2 handshakes. Designers pair the MCU with external PHYs (KSZ8061, LAN8742), audio codecs (CS5343, AK4642), and parallel SRAM/QSPI Flash to scale memory and peripherals. When designing with the PIC32MZ2048EFM144T-I/PL, allocate the 2 MB Flash carefully between the Live-Update A/B partitions (each up to 1 MB) to enable fail-safe firmware updates. Decouple VDDCORE and VDDIO pins with 100 nF X7R ceramics placed within 5 mm of each supply pin, and provide a star-ground topology for analog AVSS/AGND pairs feeding the ADC. The Ethernet MAC requires a 50 MHz reference clock from an external PHY or oscillator, and HS USB requires a precision 48 MHz fundamental or external clock source. This page consolidates real-time distributor stock, parametric drop-in alternatives, and engineering design notes not found in the manufacturer datasheet, helping embedded engineers select the correct PIC32MZ EF device quickly.

USD $11.25 재고 있음

PIC32MZ2064DAA176-I/2J

PIC32MZ2064DAA176-I/2J - 200MHz 32-bit MCU, 2MB Flash, 176-LQFP

The Microchip Technology PIC32MZ2064DAA176-I/2J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DA) family, featuring a MIPS32 microAptiv core running at 200 MHz with up to 330 DMIPS, 2 MB of dual-panel Flash, and a 176-pin LQFP (20x20 mm) package with industrial -40C to +85C temperature grade. The device integrates 640 KB of SRAM, a 12-bit 18 MSPS 45-channel ADC, a Memory Management Unit (MMU), and dedicated graphics peripherals for cost-optimized human-machine interface (HMI) designs. A 32-bit microcontroller (MCU) is a programmable system-on-chip that integrates a high-performance CPU, on-chip memory, and a rich set of peripherals (ADC, timers, communication controllers) into a single silicon die. PIC32MZ DA devices specifically target embedded graphics applications, supporting up to 24-bit color TFT panels via the integrated Graphics LCD (GL) controller. Within the broader taxonomy, the PIC32MZ2064DAA176 belongs to: microcontroller -> 32-bit MCU -> MIPS32 architecture -> embedded graphics MCU -> semiconductor IC. Key features include a 2 MB dual-panel Flash that enables live firmware updates without downtime, a 12-bit ADC capable of 18 MSPS with up to 45 analog input channels, an integrated Floating Point Unit (FPU) for DSP-class math throughput, hardware crypto accelerators (AES, SHA, DES/SHA-MD5), and a 32-bit external bus interface supporting DDR2 memory. The 176-LQFP package provides abundant I/O (up to 120 GPIO) suitable for parallel display buses and touch controller interfaces. The MIPS32 microAptiv core includes a Memory Management Unit that supports embedded operating systems such as FreeRTOS, OpenRTOS, and Micrium uC/OS-III. Combined with the 200 MHz clock and zero-wait-state Flash performance (when executing from cache), the device delivers MPU-like performance while retaining MCU-class ease of design. Dual-panel Flash enables safe field firmware upgrades via dual-bank swap, a critical capability for industrial IoT gateways. Typical applications include industrial HMI panels, automotive infotainment secondary displays, medical patient monitors, point-of-sale terminals, and IoT edge controllers with graphical dashboards. The integrated 18 MSPS 12-bit ADC supports multi-sensor data acquisition for motor control and instrumentation front-ends. The integrated graphics pipeline reduces BOM cost by eliminating external display controllers. A key design trade-off: the DA variant (vs the EF/EC families) is optimized for cost-effective graphics rather than Ethernet-heavy connectivity - if the design requires dual Ethernet MACs, consider the EF family instead. The large 176-LQFP package offers excellent I/O density but requires a 4-layer PCB with 0.5 mm lead pitch for reliable assembly. This page synthesizes distributor pricing, drop-in package alternatives within the PIC32MZ DA family, and practical design notes not consolidated in the manufacturer datasheet.

USD $7.26 재고 있음

PIC32MZ2064DAA176T-I/2J

PIC32MZ2064DAA176T-I/2J - 200MHz 32-Bit MCU 2MB | Microchip

The Microchip Technology PIC32MZ2064DAA176T-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DA series microcontroller running at 200 MHz with 2 MB of Flash and 640 KB of SRAM, housed in a 176-pin LQFP (20x20 mm) package. It integrates a graphics controller and graphics processor for embedded GUI designs, plus a 12-bit 18 MSPS ADC module with up to 45 analog inputs. A microcontroller (MCU) is a self-contained integrated circuit that combines a processor core, memory, and programmable peripherals on a single die, forming the lowest tier of the embedded computing hierarchy: MCU -> embedded processor -> system-on-chip -> semiconductor. The PIC32MZ DA family sits at the high-performance end of this hierarchy, delivering MPU-like throughput (330 DMIPS) while retaining the deterministic interrupt behavior and ease of design of an MCU. Key differentiators include dual-panel Flash for live update support, a Memory Management Unit (MMU) for optimum embedded OS execution, microMIPS mode for up to 35% code size reduction, and an integrated DDR2 DRAM controller supporting 32 MB or 128 MB externally addressable memory. Six 4-wire SPI modules (up to 50 MHz), an SQI module configurable as an additional SPI (up to 80 MHz), five I2C modules (up to 1 Mbaud) with SMBus support, CAN, and High-Speed USB round out the connectivity set. The device is built on Microchip's PIC32MZ architecture with a 1.8 V core and flexible I/O voltage domains, enabling direct interfacing to both 1.8 V and 3.3 V peripherals. The 12-bit ADC at 18 MSPS supports simultaneous sampling for motor control and power monitoring, while the graphics pipeline offloads pixel composition from the CPU. Typical applications include industrial HMI panels, medical instrumentation displays, automotive cluster graphics, IoT gateways with local visualization, and test-and-measurement front panels. The 176-LQFP exposed-pad package provides good thermal performance for sustained 200 MHz operation. When designing with this device, pay close attention to the DDR2 memory routing and the analog supply filtering for the ADC. Microchip recommends using the PIC32MZ2064DAK176 for new designs, so verify lifecycle status before committing to volume production. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection and second-sourcing decisions.

USD $13.10 재고 있음

PIC32MZ2064DAA288-I/4J

PIC32MZ2064DAA288-I/4J - 200MHz 32-bit MCU w/ GPU | Microchip

The Microchip PIC32MZ2064DAA288-I/4J is a high-performance MIPS32 microAptiv 32-bit microcontroller operating at 200 MHz with an integrated 2D Graphics Processing Unit (GPU), 2 MB of Flash, and 640 KB of SRAM, housed in a 288-pin LFBGA (15x15 mm) package. It features an external DDR2 DRAM controller supporting up to 128 MB of addressable memory, a 12-bit ADC, and up to 120 GPIO pins for high-density embedded GUI designs. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The PIC32MZ DA family specifically targets embedded graphics by combining MCU-level simplicity with MPU-like performance, eliminating the need for an external host processor in display-driven applications such as industrial HMIs, medical GUI panels, and automotive instrument clusters. Key features include the MIPS32 microAptiv core with 200 MHz operation, 2 MB on-chip Flash with live update support, 640 KB SRAM, hardware crypto accelerator, dual USB 2.0 Hi-Speed with PHY, 10/100 Ethernet MAC, CAN 2.0B, and a 2D graphics controller with dedicated GPU. The DDR2 interface allows up to 32 MB internal plus 128 MB external addressable memory, far exceeding typical MCU SRAM budgets. Architecturally, the device integrates a separate graphics pipeline (GFX controller + GPU + DDR2 Phy) alongside the main CPU, enabling GUI rendering without burdening the application core. The MIPI DSI and parallel display interfaces support TFT panels up to WXGA resolution. Typical applications include industrial human-machine interface (HMI) touch panels, medical patient monitors, smart appliance control screens, point-of-sale terminals, and automotive infotainment displays. When selecting this part, verify that the 288-LFBGA package is compatible with your PCB assembly process (BGA requires X-ray inspection and precise reflow profiling), and confirm adequate thermal vias under the exposed pad for 200 MHz operation. This page combines distributor pricing, drop-in alternatives, and practical design guidance unavailable in the standalone datasheet.

USD $7.99 재고 있음

PIC32MZ2064DAA288T-I/4J

PIC32MZ2064DAA288T-I/4J - 200MHz 32-Bit MCU 2MB Flash LFBGA-288 | Microchip

The Microchip Technology PIC32MZ2064DAA288T-I/4J is a 32-bit MIPS32 microAptiv PIC32MZ DA graphics microcontroller delivering up to 200 MHz core performance, 2 MB (2M x 8) of on-chip Flash, and 640 KB of SRAM, housed in a 288-pin LFBGA (15x15 mm) package. It targets MPU-class graphics workloads while preserving MCU ease-of-design, with on-chip DDR2 DRAM controller supporting 32 MB or 128 MB of external DDR2 memory. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for code, SRAM for data), and peripherals into one package. The PIC32MZ DA family extends the MCU concept into the graphics segment, integrating a graphics controller, a graphics processor (GPU), a 12-bit 18 MSPS ADC with up to 45 analog inputs, CAN, and Hi-Speed USB - collapsing what would traditionally be an MPU-plus-discrete-GPU system into a single BGA package. Within the broader taxonomy, this device sits as: microcontroller -> 32-bit MCU -> MIPS MCU -> graphics MCU -> PIC32MZ DA series -> PIC32MZ2064DAA288 sub-family. Key differentiating features include the hardware 2D graphics engine, the integrated DDR2 controller (a rarity on MCUs), the 18 MSPS 12-bit ADC capable of up to 45 analog inputs, dual CAN controllers, Hi-Speed USB 2.0 with on-chip PHY, and 200 MHz / 252 MIPS core throughput. The 288-LFBGA package provides abundant I/O for large parallel TFTs and external memory buses. Architecturally, the part is built on the MIPS32 microAptiv core with DSP extensions, paired with dedicated graphics peripherals and a DDR2 memory controller - a unique combination for an MCU. The 2 MB Flash supports large graphics assets, while the 640 KB SRAM reduces the need for external framebuffers in moderate-sized HMI designs. Typical applications include industrial HMI panels, automotive instrument clusters, medical patient-interface displays, IoT gateways with rich UIs, and any embedded product requiring TFT graphics without an external MPU. The wide peripheral mix (CAN, USB, ADC) also supports motor-control and motor-drive HMIs. When designing with this device, allocate ample PCB layers (typically 6+) for LFBGA fan-out, follow Microchip's DDR2 layout guidelines for signal integrity, and validate graphics BGA thermal dissipation under sustained LCD backlight load. Boot-time optimization is critical for HMI responsiveness. This page synthesizes XAIPART distributor pricing, Microchip same-family drop-in alternatives, and practical BGA-layout design notes not typically covered in the manufacturer datasheet front matter.

USD $8.35 재고 있음

PIC32MZ2064DAB169-I/HF

PIC32MZ2064DAB169-I/HF - 32-bit 200MHz PIC32MZ DA MCU 169-LFBGA | Microchip

The Microchip Technology PIC32MZ2064DAB169-I/HF is a 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ Graphics (DA) family, delivering 200 MHz / 330 DMIPS performance with 2 MB Flash and 640 KB SRAM, housed in a 169-pin LFBGA (11x11 mm) package. It features dual-panel Flash for live update support, a 12-bit 18 MSPS 45-channel ADC, and a Memory Management Unit for OS-grade embedded execution. A PIC microcontroller (MCU) is a single-chip computer that integrates a CPU core, Flash program memory, SRAM data memory, and a rich peripheral set on a single CMOS die. The PIC32MZ DA family extends traditional MCU simplicity toward MPU-like performance: the MIPS32 microAptiv core executes 32-bit instructions, microMIPS compressed code (up to 35% smaller), and DSP extensions, all behind an MMU. This hierarchy is what allows PIC32 to render as a microcontroller (MCU) -> 32-bit MCU -> MIPS-based MCU -> application-processor class MCU -> embedded SoC, bridging the gap between classic 8-bit PIC microcontrollers and full MPUs. Key features include 200 MHz CPU with 16 KB I-cache and 4 KB D-cache, 2 MB dual-panel Flash supporting live firmware updates without downtime, 640 KB SRAM with optional 32 MB or 128 MB external DDR2 expansion, an integrated 12-bit 18 MSPS 45-channel ADC, multiple CAN, USB, and Ethernet peripherals, and a graphics LCD controller optimized for GUI applications. The 169-LFBGA package exposes the full peripheral set, including up to 8 UARTs, multiple I2C/SPI, and parallel buses. Architecturally, the PIC32MZ2064DAB169 uses a superscalar microAptiv core with hardware multiply/divide, single-cycle MAC, and a tightly-coupled prefetch buffer; dual-panel Flash effectively doubles the Flash addressable space by alternating active/update panels, which is critical for safety and OTA scenarios. The integrated MMU and 640 KB SRAM make it suitable for embedded Linux-class workloads and high-bandwidth GUI rendering. Typical applications include industrial HMI/GUI displays, multi-protocol industrial automation controllers, automotive infotainment clusters, smart energy meter gateways, and high-end medical patient-monitoring displays. The wide peripheral mix (CAN + USB + Ethernet + LCD) consolidates what would otherwise be a 2-chip design into one MCU. Designers should plan for an external 1.8 V core regulator and a 3.3 V I/O rail; the DDR2 interface (when used) requires controlled-impedance PCB traces and matched-length routing. Live-update firmware design should leverage the dual-panel Flash feature, but designers should plan to switch to the PIC32MZ2064DAL169 for new designs as the B169 variant is being phased toward the lower-cost L169 successor. This page consolidates real-time distributor stock, web datasheets, drop-in alternatives, and engineering design notes that go beyond what is printed in the Microchip datasheet alone, including a same-package drop-in cross-reference and pinout diagram.

USD $19.95 재고 있음

PIC32MZ2064DAB176T-I/2J

PIC32MZ2064DAB176T-I/2J - 200MHz 32-Bit MCU, 2MB Flash, 176-LQFP | Microchip

The Microchip Technology PIC32MZ2064DAB176T-I/2J is a 32-bit MIPS microAptiv-based PIC32MZ DA microcontroller operating at up to 200 MHz with 2 MB of Flash and 640 KB of SRAM, housed in a 176-pin LQFP (20x20 mm) package. It integrates an integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, and on-chip/external DDR2 DRAM addressing up to 128 MB. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, program and data memory, and a rich set of peripherals (ADC, timers, communication interfaces, GPIO) into one package. Within the semiconductor hierarchy it sits at: 32-bit MCU -> microcontroller -> embedded processor -> integrated circuit -> semiconductor. The PIC32MZ DA family in particular targets GUI and HMI applications by combining MPU-class compute with MCU-level integration and on-chip graphics hardware. Key features include MIPS32 microAptiv core, 2 MB Flash (2M x 8), 640 KB SRAM, integrated LCD/GPU blocks, 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB 2.0, CAN, and DDR2 DRAM controller supporting up to 32 MB on-chip or 128 MB external address space. The 176-LQFP (20x20 mm) package gives 156 GPIO-capable pins for driving parallel-display and mixed-signal designs. Architecture-wise, the part uses the microAptiv pipeline with DSP and FPU extensions, plus a dedicated graphics block that offloads pixel rendering from the CPU. The 18 MSPS 12-bit ADC can sample 45 channels concurrently, and the DDR2 controller offloads framebuffer memory from internal RAM, enabling QVGA/WQVGA TFT panels without external SDRAM components in many designs. Typical applications include industrial HMI bridges, TFT-LV graphics, multi-channel industrial control with CAN, high-resolution HMI bridges, automotive instrument cluster, and TFT LCD driver interfaces. Its 40 MB Flash footprint leaves headroom for full graphics stacks (UGUI, emWin, Microchip MPLAB Harmony) plus wireless protocols. When designing with this part, plan DDR2 trace length matching (within 25 mils) and decoupling. The Graphics Processor reduces CPU load but the framebuffer still requires careful DMA bandwidth budgeting on the host bus. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $9.45 재고 있음

PIC32MZ2064DAB288-I/4J

PIC32MZ2064DAB288-I/4J - 200MHz 32-Bit MCU, 2MB Flash, LFBGA-288 | Microchip

The Microchip PIC32MZ2064DAB288-I/4J is a high-performance 32-bit MIPS32 microAptiv microcontroller operating up to 200 MHz, integrating 2 MB Flash and 640 KB SRAM in a 288-ball LFBGA (15x15 mm) package. It is part of the PIC32MZ DA graphics family and is engineered for MPU-class graphical user interface (GUI) applications with on-chip DDR2 DRAM controller, integrated Graphics Controller, and dedicated Graphics Processor. A microcontroller (MCU) is a single integrated semiconductor device that combines a processor, memory (Flash and SRAM), and programmable I/O peripherals on one die. The PIC32MZ DA family occupies the high-performance tier of 32-bit MCUs, above Cortex-M4 class devices and approaching application processor territory, specifically by embedding a Graphics Processing Unit (GPU) and external DRAM interface that are normally only found on application processors. Key features of the PIC32MZ2064DAB288-I/4J include: 2 MB on-chip program Flash (2M x 8), 640 KB SRAM, integrated DDR2 DRAM controller supporting up to 32 MB or 128 MB external addressable DDR2, hardware Graphics Controller with GPU for accelerated display rendering, a 12-bit 18 MSPS ADC module with up to 45 analog inputs, Hi-Speed USB 2.0 with integrated PHY, two CAN 2.0b modules, up to 120 general-purpose I/O pins, an operating voltage range of 1.7 V to 3.6 V, and an industrial operating temperature grade of -40 C to +85 C. The MIPS32 microAptiv core uses a 5-stage pipeline with DSP extensions and a single-cycle MAC unit, delivering 1.79 DMIPS / MHz or roughly 362 DMIPS at 200 MHz. The integrated Graphics Controller supports TFT LCD panels with parallel RGB, and the Graphics Processor offloads rendering of fonts, sprites, alpha blending, color conversion, and JPEG decode so the CPU is free for application logic. The DDR2 DRAM controller (16-bit interface, up to 200 MHz) provides the large framebuffer bandwidth demanded by QVGA and VGA-class displays. Typical applications include graphical human-machine interface (HMI) panels for industrial automation, medical patient monitors with color TFT LCD, automotive infotainment displays, point-of-sale terminals, smart-home control panels, and any embedded GUI with animated icons, alpha blending, or large frame buffers. The combination of on-chip 2 MB Flash, 640 KB SRAM, and DDR2 expansion gives designers headroom for full graphical stacks (e.g. emWin, Microchip Graphics Library) plus application code. Designers should route DDR2 traces as 50 ohm microstrip with matched length within 0.10 inch, place 0.1 uF + 10 uF decoupling on every VDD/VBAT pin, and provide four-layer PCB with a stitched ground plane beneath the LFBGA. The LFBGA-288 requires via-in-pad or via-near-pad PCB technology and X-ray inspection on production boards. This page synthesizes distributor pricing across DigiKey, LCSC, JLCPCB and Microchip Direct, pin-compatible same-footprint LFBGA-288 alternatives, and practical PCB design notes not found in the manufacturer datasheet alone.

USD $9.20 재고 있음

PIC32MZ2064DAB288T-I/4J

PIC32MZ2064DAB288T-I/4J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip PIC32MZ2064DAB288T-I/4J is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ DA family, operating at 200 MHz with 2 MB of Flash and 640 KB of SRAM, housed in a 288-pin LFBGA (15x15 mm) package. It is engineered for embedded applications where MPU-class throughput is required but MCU-grade simplicity is preferred, delivering up to 200 MHz single-core MIPS performance with integrated DDR2 DRAM controller, Graphics Controller and Graphics Processor, and a 12-bit 18 MSPS ADC with up to 45 analog inputs. A PIC microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals onto one die; the PIC32MZ DA family specifically extends this concept toward GUI and human-machine-interface workloads by adding a graphics pipeline, external DDR2 memory interface, and high-throughput analog/digital conversion. Within the broader hierarchy, this part sits as a microcontroller -> embedded controller -> 32-bit MCU -> MIPS-based MCU -> PIC32MZ DA series -> DAB288 sub-family with 2 MB Flash. Key features include a 32-bit MIPS32 core at 200 MHz, 2 MB Flash program memory, 640 KB SRAM, support for up to 32 MB or 128 MB external DDR2 DRAM, an integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog channels, plus CAN and High-Speed USB peripherals. The on-chip FPU and DSP extensions enable signal-processing workloads, while the DDR2 interface removes the need for an external memory controller companion chip in mid-density designs. The BGA package maximizes peripheral pin-out (288 balls) for designs that require extensive GPIO, parallel display buses, and multiple serial interfaces at full quota. Typical applications of the PIC32MZ DA family include industrial-grade HMI panels, automotive infotainment displays, medical patient-interface screens, point-of-sale camera, IoT gateways with LCD display, and audio player. The integrated graphics controller eliminates an external GPU in many cost-sensitive GUI designs, while the high-throughput ADC simplifies mixed-signal data acquisition. When designing with this device, allocate careful attention to BGA fan-out routing and thermal management - the LFBGA package benefits from at least 4 PCB layers and a ground flood under the device to spread heat. The DDR2 controller needs matched-length routing and reference-VPC decoupling; Microchip's MPLAB Harmony graphics project framework is recommended for board-level bring-up.

USD $7.95 재고 있음

PIC32MZ2064DAG169-I/6J

PIC32MZ2064DAG169-I/6J - 200MHz 32-Bit Graphics MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAG169-I/6J is a high-performance 32-bit MIPS32 microAptiv microcontroller operating at up to 200 MHz (330 DMIPS), integrating 2 MB of Flash program memory, 640 KB of SRAM, and an integrated Graphics Controller with on-chip DDR2 DRAM support (32 MB or 128 MB options) for advanced GUI and HMI designs. Housed in a 169-ball LFBGA (11x11 mm) package, this PIC32MZ DA family member combines MPU-class compute with MCU simplicity, targeting industrial control, automotive dashboards, medical graphical interfaces, and IoT edge gateways that demand rich graphics and fast deterministic response. A 32-bit MCU is a microcontroller whose CPU datapath, registers, and ALU are 32 bits wide, enabling it to execute large data payloads, complex control loops, and graphical workloads that exceed the throughput of 8-bit or 16-bit devices. Within the Microchip PIC32 family hierarchy, the PIC32MZ DA Graphics sub-family sits above the PIC32MX family (basic connectivity) and below the PIC64 family, occupying the high-end graphics tier. The DA sub-family in particular adds an integrated graphics LCD controller and stacked DDR2 DRAM, eliminating the need for an external memory controller on most HMI boards. Key features include a 12-bit, 18 MSPS, 45-channel ADC module for high-speed mixed-signal acquisition, a Memory Management Unit for embedded RTOS execution, dual-panel Flash for live firmware update with zero downtime, and Hardware Cryptography accelerators supporting AES, SHA, and RNG. Communication peripherals cover USB 2.0 High-Speed with PHY, CAN 2.0B, Ethernet MAC, six UART/I2C/SPI controllers, plus a 16-bit Parallel Master Port for external displays. Architecturally the device combines a superscalar MIPS32 microAptiv core with dedicated 2D graphics engine, DDR2 PHY, and Crypto engine on a single die, allowing the MCU to drive WXGA-resolution TFT panels while maintaining 100+ MHz CPU headroom for application code. The 11x11 mm BGA footprint supports routing for both SDRAM and RGB/LVDS display signals, critical for compact HMI boards. Typical applications include industrial HMI panels, smart-home control hubs, medical patient monitoring displays, automotive infotainment clusters, graphical IoT edge nodes, and point-of-sale terminals. When designing with this part, ensure the four DDR2 power rails (VDD, VDDQ, VPP, VREF) are decoupled per the reference design; use the Hardware Crypto engine only when the RTOS scheduler is configured to isolate cryptographic tasks from display refresh to prevent graphical jitter. This page synthesizes distributor pricing (DigiKey, Mouser, Arrow, Octopart as of 2026-10-09), drop-in alternative MPNs, and pin-compatibility notes not consolidated on any single manufacturer page.

USD $12.95 재고 있음

PIC32MZ2064DAG169T-I/6J

PIC32MZ2064DAG169T-I/6J - 200MHz MCU 2MB Flash LFBGA-169 | Microchip

The Microchip Technology PIC32MZ2064DAG169T-I/6J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DA) family, built on the MIPS32 microAptiv core running at 200 MHz and delivering 330 DMIPS of processing throughput. It integrates 2 MB of Flash and 640 KB of SRAM, packages the GPU-friendly graphics peripherals, and stacks an external 32 MB or 128 MB addressable DDR2 memory die in the same 169-ball LFBGA (11x11) package to feed high-resolution displays. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and programmable peripherals on one die; the PIC32MZ DA family occupies the upper end of the MCU spectrum, often competing with entry-level MPUs for graphics workloads. Within the broader hierarchy it sits as: PIC32MZU -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC, and it is one of Microchip's premier choices for human-machine-interface applications. Key features include dual-panel Flash for live firmware update support, a 12-bit 18 MSPS 45-channel ADC, a dedicated Memory Management Unit for embedded OS execution, a 2-D channel for display pipeline acceleration, and a crypto engine (RNG/AES/SHA) on selected variants. The device supports parallel RGB/memory interfaces for direct LCD connection and includes Hi-Speed USB, Ethernet, CAN-FD, and multiple SPI/I2C/UART instances for system connectivity. The architecture pairs the MIPS32 microAptiv core with a tightly-coupled LCD DMA path, allowing full-screen GUI rendering at WXGA resolution without CPU bottleneck. Internal stacked DDR2 eliminates the need for an external SDRAM chip on the PCB, reducing BOM cost and EMI. Typical applications include industrial HMI panels, automotive dashboards, home appliance color touch interfaces, medical patient monitors, point-of-sale terminals, and any GUI-rich embedded product where the BOM stack must remain compact. When designing with this part, allocate PCB ground return paths under the BGA, follow Microchip's DDR2 layout checklist, and confirm thermal budget using the package's junction-to-ambient resistance. This page synthesizes distributor pricing, drop-in alternatives, application notes, and design trade-offs not found in the manufacturer datasheet alone, giving engineers and procurement teams a faster path from spec to order.

견적 요청 재고 있음

PIC32MZ2064DAG176-I/2J

PIC32MZ2064DAG176-I/2J - 200MHz 32-Bit MCU, 2MB Flash, 176-LQFP | Microchip

The Microchip Technology PIC32MZ2064DAG176-I/2J is a high-performance 32-bit MIPS microcontroller from the PIC32MZ Graphics (DA) family, featuring the MIPS32 microAptiv core running at 200 MHz with up to 330 DMIPS of computational throughput. It integrates 2 MB of dual-panel Flash memory and 640 KB of SRAM in a 176-pin LQFP (20x20 mm) package with exposed thermal pad, enabling GUI-rich embedded designs with MPU-class performance. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on one die. PIC32MZ DA devices sit in the high-performance tier of the PIC32 family, alongside the EF (Ethernet) and EC (connectivity) sub-families, and are designed for applications that require large memory footprints, real-time graphics, and connectivity stacks. The DA series specifically adds an integrated Graphics LCD controller and a DDR2 external memory interface that can address 32 MB or 128 MB of external DDR2, distinguishing it from EF/EC variants that lack a GPU. Key specifications include 2 MB (2M x 8) of Flash supporting live update via dual-panel architecture, 640 KB of SRAM, an integrated 12-bit 18 MSPS 45-channel ADC, USB-HS, Ethernet MAC, SD card host, CAN, and a 2D Graphics Processing Unit (GPU) for accelerating GUI rendering. The wide memory map and Memory Management Unit (MMU) support embedded operating systems such as FreeRTOS, OpenRTOS, and Micrium OS, while microMIPS compressed mode reduces code size by up to 35% compared to standard MIPS32 instruction encoding. Architecturally, the PIC32MZ2064DAG176-I/2J uses a superscalar microAptiv core with hardware multiply/divide and a tightly-coupled peripheral bridge. The dual-panel Flash subsystem allows a firmware image to run from one panel while the other is being reprogrammed, enabling field firmware updates without downtime. The integrated GPU and LCD controller support resolutions up to WVGA with hardware-accelerated rendering, offloading pixel-pushing from the CPU. Typical applications include industrial HMI panels, automotive instrument clusters, medical patient monitors, point-of-sale terminals, smart home control panels, and graphical IoT gateways. The wide 1.8 V core / 3.3 V I/O supply and 176-pin LQFP footprint simplify PCB layout for designs that previously required a discrete MPU plus external SDRAM. When designing with this part, ensure the DDR2 interface is impedance-controlled and length-matched per JEDEC specifications; place a 1.8 V LDO close to the core supply pins and bulk-decouple every power rail. Microchip recommends considering the pin-compatible PIC32MZ2064DAR176 variant for new designs where extended commercial availability is required. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that go beyond what the manufacturer datasheet provides, helping engineers and procurement teams make informed decisions.

USD $26.10 재고 있음

PIC32MZ2064DAG176T-I/2J

PIC32MZ2064DAG176T-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAG176T-I/2J is a high-performance 32-bit microcontroller from the PIC32MZ DA family, based on the MIPS32 microAptiv core running up to 200 MHz, integrating 2 MB of Flash and 640 KB of SRAM in a 176-pin LQFP (20x20 mm) package with exposed pad. It is engineered for human-machine interface (HMI) and graphical applications, combining MPU-class compute density with MCU-class integration. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (UART, SPI, I2C, ADC, timers, GPIO). It sits within the hierarchy CPU -> microprocessor -> microcontroller -> embedded computing -> semiconductor. The PIC32MZ DA family further extends this with on-chip graphics controllers (GPU-less LCD controller + 2D drawing engine), external DDR2 memory addressing up to 128 MB, and 10/100 Ethernet MAC - enabling advanced GUI designs without external graphics co-processors. Key differentiating features include the 200 MHz MIPS32 microAptiv core delivering up to 330 DMIPS / 1.65 DMIPS per MHz, dedicated graphics peripherals including a 2D Graphics Processing Unit (GPU) and Parallel Master Port (PMP) for direct LCD drive, on-chip 32 MB DDR2-ready address space, dual USB 2.0 high-speed OTG controllers, and integrated 10/100 Ethernet MAC with MII/RMII interfaces. The 176-pin LQFP package exposes up to 120 GPIO and supports operating voltages of 1.8 V core / 3.3 V I/O with industrial -40C to +85C temperature range. Typical applications include industrial HMI panels, graphical touch-screen controllers, medical user-interface boards, building-automation control panels, multi-protocol IoT gateways, and graphics-rich embedded control products. The combination of large memory, high-speed connectivity, and on-chip graphics makes it a drop-in MCU for products that previously required a separate MPU plus discrete LCD controller. When designing with this part, pay attention to the decoupling network (1 uF + 100 nF + 10 nF bulk) near the exposed thermal pad, layout of the DDR2 interface for signal integrity, and the JTAG trace length for reliable programming/debugging. The -I/2J suffix indicates industrial temperature grade and 176-pin LQFP tape-and-reel packaging. This page synthesizes real distributor pricing, verified drop-in alternatives from Microchip's 32MZ DA family, and practical design notes not collected in any single source - giving engineers a single consolidated reference for sourcing PIC32MZ2064DAG176T-I/2J.

USD $22.05 재고 있음

PIC32MZ2064DAH169-I/6J

PIC32MZ2064DAH169-I/6J - 200MHz 32-bit MCU, 2MB Flash, 169-LFBGA

The Microchip Technology PIC32MZ2064DAH169-I/6J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DA) family, built around the MIPS32 microAptiv core running at 200 MHz (330 DMIPS) and housed in a 169-ball LFBGA (11x11 mm) package. It integrates 2 MB Flash, 640 KB SRAM, and on-chip DDR2 controller supporting 32 MB or 128 MB externally addressable DDR2, providing MPU-class memory bandwidth for graphics workloads. Key features include a 12-bit, 18 MSPS, 45-channel ADC module with analog comparators and a high-speed USB 2.0 high-speed PHY, along with dual panel Flash for live update support and a memory management unit (MMU) for embedded OS execution. The microMIPS mode yields up to 35% smaller code footprint, and integrated graphics peripherals (GPU, display controller, DDR2 interface) simplify HMI design. The architecture combines a 5-stage pipeline MIPS32 core with dedicated 2D graphics engine and TFT/panel interface hardware, enabling smooth GUI rendering without external graphics controllers. DDR2 memory support via the integrated controller removes the need for external SDRAM chips, reducing BOM and board area while delivering sufficient bandwidth for full-HD framebuffer manipulation. Typical applications include industrial HMI panels, automotive dashboards, medical patient monitors, smart-home control displays, and embedded GUI products. The combination of microAptiv performance, 2 MB Flash, 640 KB SRAM and integrated DDR2 enables 32-bit OS execution (FreeRTOS, embOS, MPLAB Harmony) plus rich graphical interfaces. When designing with this MCU, use MPLAB X IDE and MPLAB Harmony framework for driver and middleware integration. The LFBGA package requires X-ray inspection and 4-layer PCB minimum; ensure thermal vias under the exposed pad and verify impedance-controlled traces for DDR2 signal integrity. This page synthesizes distributor pricing, drop-in alternatives, application notes, and practical design considerations not found in the manufacturer datasheet alone.

USD $12.60 재고 있음

PIC32MZ2064DAH176-I/2J

PIC32MZ2064DAH176-I/2J - 200MHz MCU, 2MB Flash, GPU, DDR2 | Microchip

The Microchip Technology PIC32MZ2064DAH176-I/2J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DA) family, featuring a MIPS32 microAptiv core running at 200 MHz with 330 DMIPS, integrated 2D graphics processing unit (GPU), and DDR2 memory controller in a 176-pin LQFP (20x20 mm) package. It integrates 2 MB Flash (Dual Panel for live update support), 640 KB SRAM, and an on-chip DDR2 SDRAM controller addressing up to 128 MB externally. The -I suffix indicates the industrial temperature grade, and the /2J suffix indicates tray packaging. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and peripherals. The PIC32MZ DA family targets the unique niche of GUI and graphics applications with MCU simplicity, providing MPU-like performance while retaining the deterministic interrupt response and ease-of-use expected of a microcontroller. Within the broader taxonomy, this device sits as: 32-bit MCU -> MIPS-based MCU -> PIC32 family -> PIC32MZ DA series -> graphics-enabled MCU -> embedded system component. Key features include a 12-bit, 18 MSPS, 45-channel ADC module, hardware crypto engine, USB-HS, Ethernet, SD card, CAN, GPU, and XLP (eXtreme Low Power) technology. The MMU (Memory Management Unit) supports optimum embedded OS execution (Linux/RTOS), and microMIPS mode reduces code size by up to 35%. Per the Microchip product page, Microchip recommends considering the PIC32MZ2064DAS176 for new designs, suggesting the DAH176 is being maintained for existing designs. Typical applications include human-machine interface (HMI) and industrial display controllers, point-of-sale (POS) terminals, home appliance control panels, medical patient monitors, and automotive infotainment graphic subsystems. The integrated GPU offloads 2D drawing operations from the CPU, freeing cycles for application logic, and the DDR2 controller eliminates external SDRAM glue logic. Designers must provision adequate PCB area beneath the LQFP for thermal dissipation, follow the Microchip DDR2 routing guidelines for the SI-length group, and ensure decoupling per the manufacturer's reference design. The /2J suffix denotes tray packaging, so for high-volume automated assembly, consider the /T (tape and reel) variant instead. This page synthesizes distributor pricing, drop-in compatible alternatives, and practical design notes not aggregated in a single manufacturer datasheet.

USD $11.30 재고 있음

PIC32MZ2064DAH176T-I/2J

PIC32MZ2064DAH176T-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAH176T-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DA graphics microcontroller IC running at 200 MHz, equipped with 2 MB (2M x 8) of Flash and 640 KB of SRAM, and housed in a 176-pin LQFP (20x20) package with an exposed thermal pad. The part integrates a 12-bit 18 MSPS ADC, a hardware Crypto engine, a Graphics Processing Unit (GPU), High-Speed USB, Ethernet, CAN, and an external DDR2 DRAM controller capable of addressing up to 128 MB externally. An LQFP-176 (Low-profile Quad Flat Package) microcontroller is a surface-mount IC package with 176 gull-wing leads on a 20 mm x 20 mm body and an exposed pad for thermal dissipation; it sits inside the broader LQFP package family -> QFP family -> surface-mount IC packaging hierarchy. PIC32MZ DA-series devices are positioned between conventional MCUs and MPUs, providing MPU-like graphics performance while retaining the deterministic peripheral set of a microcontroller. Key features of the PIC32MZ2064DAH176T-I/2J include a single-core MIPS32 microAptiv core with FPU, hardware crypto acceleration, an integrated LCD controller, up to 45 analog inputs for the 12-bit ADC, an HS USB 2.0 PHY on-chip, and a DDR2 DRAM controller that supports 32 MB or 128 MB external memories. The device supports an operating voltage of 2.2V to 3.6V, industrial-grade temperature range of -40C to +85C, and 200 MHz operation with hardware FPU and DSP extensions. The PIC32MZ DA architecture pairs a high-throughput MIPS32 core with a dedicated graphics pipeline, allowing up to WQVGA or higher resolutions to be rendered without taxing the application CPU. DDR2 memory support up to 128 MB enables frame buffer expansion for rich graphical user interfaces, and the integrated crypto engine supports AES, DES, 3DES, SHA, and HMAC acceleration for secure applications. Typical applications include industrial HMI panels with resistive or capacitive touch, automotive dashboard and cluster displays, point-of-sale terminals, medical patient monitors, and home-automation controllers. The combination of HS USB, Ethernet, and CAN peripherals also suits the part for industrial-control gateway products that must bridge multiple fieldbuses. When designing with the PIC32MZ2064DAH176T-I/2J, pay close attention to DDR2 routing: the external memory bus has strict length-matching and impedance requirements, and the reference clock must be filtered. Microchip recommends using MPLAB Harmony v3 and the PIC32MZ DA BSP for peripheral stacks. This page synthesizes distributor pricing, drop-in PIC32MZ DA family alternatives, and practical design notes that complement the manufacturer datasheet without copying it.

USD $15.51 재고 있음

PIC32MZ2064DAK169-I/HF

PIC32MZ2064DAK169-I/HF - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAK169-I/HF is a high-performance 32-bit MIPS microAptiv microcontroller integrating 2MB Flash, 640KB SRAM, an integrated Graphics Controller and Graphics Processor, and an on-chip externally addressable DDR2 DRAM controller (32MB or 128MB), housed in a 169-pin LFBGA (11x11 mm) package. An MCU (Microcontroller Unit) is a single-chip computer that combines a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of peripherals (ADC, timers, communication controllers) on one die. The PIC32MZ DA family sits in the high-performance tier of Microchip's PIC32 portfolio, delivering MPU-like throughput while keeping the ease-of-use and deterministic interrupt model of an MCU. Within the broader taxonomy, PIC32MZ DA belongs to: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> graphics-enabled MCU. Key features include a 200 MHz / 330 DMIPS MIPS32 microAptiv core with microMIPS mode (up to 35% smaller code), 2MB dual-panel Flash for live firmware update, a 12-bit 18 MSPS ADC with up to 45 analog inputs, a dedicated Graphics Processing Unit (GPU) and LCD controller supporting WQVGA and larger panels, HS USB 2.0, CAN, and a high-bandwidth DDR2 SDRAM interface. The integrated DDR2 controller lets designers attach up to 128MB of external SDRAM without an external memory controller, simplifying board layout for graphical HMI designs. Architecturally, the device combines the microAptiv core with a 128-bit-wide Flash bus for zero-wait-state execution at 200 MHz, a Memory Management Unit (MMU) for embedded OS support, and dedicated 2D graphics hardware that offloads rendering from the CPU. The dual-panel Flash subsystem supports live firmware updates - one panel runs application code while the other receives the new image, then a fail-safe swap boots the new firmware. Typical applications include industrial graphical HMI terminals, automotive infotainment clusters, medical patient monitors with color TFT displays, smart-home control panels, and point-of-sale terminals. The integrated graphics pipeline lets developers drive TFT LCDs up to WQVGA without an external graphics controller. When designing with the PIC32MZ2064DAK169-I/HF, allocate 4-layer PCB routing for the DDR2 interface to meet length-matching and impedance requirements, follow Microchip application note AN1338 for DDR2 layout, and provide a bulk + bypass capacitor network on every AVDD/AVSS pair used by the 18 MSPS ADC to preserve SNR. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet, giving procurement and design engineers a single reference for evaluating the PIC32MZ DA family.