집적 회로

하위 카테고리

📁 ADC/DAC 2368 제품 📁 증폭기 IC 510 제품 📁 오디오 코덱 15 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 137 제품 📁 DSP 906 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6537 제품 📁 인터페이스 IC 1019 제품 📁 LED 드라이버 1 제품 📁 로직 IC 260 제품 📁 메모리 IC 837 제품 📁 마이크로컨트롤러 17662 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (30297)

TMS320F28379DPTPS - 800MIPS Dual-Core C28x MCU 1MB Flash | TI
TMS320F28379DPTPS

TMS320F28379DPTPS - 800MIPS Dual-Core C28x MCU 1MB Flash | TI

The Texas Instruments TMS320F28379DPTPS is a C2000™ 32-bit dual-core Delfino™ microcontroller with 200 MHz CPU clock (800 MIPS), 1 MB (512K x 16) of flash, and 176 pins in a 24x24 mm HLQFP (PTP) package. Functional-Safety (FuSa) capable, it integrates 2x C28x CPUs, 2x Control Law Accelerators (CLAs), a single-precision FPU, TMU accelerator, VCU-II, 16-bit ADCs, configurable logic blocks (CLB), and EMIF. A C2000 Delfino microcontroller is a real-time control MCU optimized for high-performance digital signal processing in power electronics, motor control, and industrial automation. The Delfino family sits above the Piccolo series in the C2000 hierarchy (C28x core -> C2000 MCU -> real-time control MCU -> 32-bit embedded processor). It targets deterministic loop execution at sub-microsecond latencies for closed-loop control applications. The TMS320F28379DPTPS features dual 200 MHz C28x cores (each 200 MIPS), dual CLAs offloading control loops, 16-bit ADCs at up to 3.5 MSPS, sigma-delta filter interfaces, eight Enhanced PWM modules (16 channels), four Enhanced Capture (ECAP), three Enhanced Quadrature Encoder Pulse (EQEP), and a USB 2.0 Full-Speed + Mac + PHY. The 1 MB flash, 204 KB SRAM, and four ECC-protected memory zones support IEC 60730 / IEC 61508 / ISO 26262 functional safety libraries. Architecturally, the dual-core design partitions control and housekeeping tasks: one C28x core runs motor or power-converter state machines while the second CLA-accelerated core runs housekeeping, communications, or sensor-fusion code. The TMU accelerates trigonometric transforms (sin, cos, arctan) used in field-oriented control, and the VCU-II accelerates complex math (FFT, complex MAC) for signal-chain and grid-monitoring designs. Lock-step switching protection and dual-zone ECC support ASIL-D capable system designs. Typical applications include solar inverters and grid-tie energy storage, industrial servo drives and robot motor control, EV traction inverter and onboard chargers, digital power supplies (PFC + LLC + DCDC), and aerospace actuation systems. The 176-HLQFP package with 0.5 mm pitch is a long-running industrial footprint. When designing with this device, allocate 2 layers at minimum for ground/power pour, place decoupling within 2 mm of every VDDSOC/VDDIO pin, and use a 4-layer stack-up with dedicated ground plane for clean ADC reference and PWM signals. The high-performance analog rails (VDDA, VREFHI) must be sourced from a clean LDO with ferrite beads to isolate digital switching noise. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $11.80 재고 있음
TMS320F28379DZWTS - Dual-Core 800MIPS C2000 MCU | Texas Instruments
TMS320F28379DZWTS

TMS320F28379DZWTS - Dual-Core 800MIPS C2000 MCU | Texas Instruments

The Texas Instruments TMS320F28379DZWTS is a 32-bit dual-core C2000 Delfino microcontroller with 200 MHz CPU clock (800 MIPS aggregate), 1 MB Flash, and a 337-ball NFBGA package (16x16 mm). It integrates two TMS320C28x CPU cores, two Control Law Accelerators (CLAs), a Floating-Point Unit (FPU), Trigonometric Math Unit (TMU), and a Configurable Logic Block (CLB) for hardware-level custom logic. The device targets Functional Safety (FuSa) applications with built-in safety features and is part of TI's TMS320F2837xD family. A microcontroller (MCU) is a single-chip computer integrating CPU, memory, and peripherals that engineers program to sense, compute, and actuate in embedded systems. Within the taxonomy, MCUs sit under microcontrollers -> embedded processors -> digital ICs -> integrated circuits -> semiconductors. The C2000 Delfino family specifically targets real-time control: motor control, digital power, and servo loops where deterministic interrupt latency and per-MIPS cost dominate the design decision. Key specifications: 1 MB on-chip Flash (512K x 16), 204 KB SRAM, dual 200 MHz C28x cores, hardware FPU and TMU, three 12-bit ADCs at up to 3.5 MSPS each, four 16-bit ADCs (throughput to 200 ns), CMPSS (comparator/DAC subsystems), eight ePWM modules, two eQEP, three eCAP, two SDFM, USB 2.0 (host + device), CAN-FD, SPI, I2C, UART, and EMIF for external memory expansion. Architecturally, the dual C28x cores each have their own CLA, allowing parallel execution of control loops without CPU loading. The TMU accelerates sin/cos/atan math used in transforms and observer algorithms, while the CLB enables hardware-state-machine glue logic that previously required external CPLDs. Safety diagnostics include ECC on Flash and RAM, dual watchdog timers, lockstep on CPU and CLA, and a built-in self-test (BIST). Typical applications include industrial motor drives and multi-axis servo control, photovoltaic solar inverters and digital power conversion, electric vehicle traction inverters and onboard chargers, and renewable-energy grid-tie inverters. Industrial factory-automation controllers and PLCs leverage the deterministic CLA cores for sub-microsecond control loops. When designing with this MCU, plan the PCB for a 337-ball NFBGA (16x16 mm, 0.8 mm pitch) - a 4-layer stackup minimum, with all power rails decoupled within 5 mm of each ball group. Use TI's C2000Ware SDK and the Code Composer Studio IDE for development; software compatibility is preserved across F2837xD, F2837xS, and F2807x pin-compatible families. This page compiles distributor pricing (LCSC $20.79, Heisener $22.86 as of 2026-10-11), verified cross-references (TMS320F28379DZWTT, TMS320F28379DPTPS, F28379S - all TI and drop-in pin-compatible), and practical design notes not always present on datasheet excerpts.

USD $20.79 재고 있음
TMS320F28379SPTPS - 200MHz C28x Delfino MCU 1MB Flash | TI
TMS320F28379SPTPS

TMS320F28379SPTPS - 200MHz C28x Delfino MCU 1MB Flash | TI

The Texas Instruments TMS320F28379SPTPS is a 32-bit C2000™ C28x Delfino™ functional-safety microcontroller integrating one C28x CPU plus one Control Law Accelerator (CLA), a floating-point unit (FPU) and a Trigonometric Math Unit (TMU). The device operates up to 200 MHz, delivers up to 400 MIPS of computational throughput and includes 1 MB (512K x 16) of on-chip flash with ECC. It is housed in a 176-pin HLQFP (24x24 mm) package with an exposed thermal pad. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program and data memory, peripherals and I/O into one package. The C2000 Delfino family specifically targets real-time control: motor drives, digital power converters, solar inverters and industrial servo loops. The 2837xS generation adds a CLA - an independent 32-bit floating-point coprocessor that offloads time-critical control loops from the main CPU, allowing closed-loop PWM, ADC sampling and feedback math to execute deterministically without CPU intervention. Key specifications include a 16-bit ADC subsystem with up to 3.5 MSPS aggregate throughput, three 12-bit DAC outputs, enhanced pulse-width modulator (ePWM) channels with high-resolution capability, configurable logic blocks (CLB), an external memory interface (EMIF), USB 2.0 (full-speed OTG), CAN, SPI, I2C, UART, McBSP and a 16-channel sigma-delta filter module. Functional-safety features include lockstep CPU options, ECC on flash/SRAM and a safety documentation package aligned with IEC 61508 SIL 3 and ISO 26262 ASIL-D system-level goals. The architecture combines a Harvard-bus C28x core with the parallel CLA, both supporting IEEE-754 single-precision float. Tightly-coupled memory (TCM) and a multi-layer bus matrix give deterministic interrupt latency critical for field-oriented control (FOC) loops and digital power compensation. The configurable logic block (CLB) augments this with user-programmable glue logic that previously required external CPLDs. Typical applications include industrial servo drives, AC induction and PMSM motor controllers, solar PV inverters, telecom rectifier modules, HEV/EV traction inverters, on-board chargers, digital power factor correction and welding power supplies. The 176-HLQFP footprint is also a common choice for power-conversion DSPs in 1U/2U telecom bricks. When designing with this part, plan decoupling for the 1.2 V core rail: at least 10 µF bulk plus 0.1 µF per VDD pair, placed within 5 mm of the balls. Route the analog and digital ground domains separately and join them at a single point under the exposed pad. The HLQFP exposed pad must be soldered to a continuous copper plane of at least 1 square inch to keep junction temperature below 105 °C at full 200 MHz CPU + 200 MHz CLA load.

USD $25.10 재고 있음
TMS320F28P550SG-Q1 - C2000 MCU 150MHz, 512KB Flash | TI
TMS320F28P550SG-Q1

TMS320F28P550SG-Q1 - C2000 MCU 150MHz, 512KB Flash | TI

The TMS320F28P550SG-Q1 is a C2000 real-time microcontroller from Texas Instruments, designed for power electronics applications. It features a 32-bit C28x CPU running at 150 MHz, 512 KB of flash memory, and a Control Law Accelerator (CLA) for real-time control. The device integrates five ADCs, a Configurable Logic Block (CLB), AES encryption, and a Neural Processing Unit (NPU), supporting high-power-density designs with GaN and SiC technologies. A C2000 MCU is a high-performance microcontroller optimized for real-time control in power conversion and motor control. As a member of the C2000 family, it sits in the hierarchy of embedded processors, bridging the gap between traditional MCUs and digital signal processors. The F28P55x series is specifically designed for ultra-low latency control loops. Key features include 150 MHz CPU speed, 512 KB flash, 256 KB RAM, and a 120 MHz CLA. The device has five 12-bit ADCs with up to 4 MSPS, and an enhanced PWM module for GaN/SiC switching. The NPU accelerates AI-based algorithms for industrial applications. The architecture combines the C28x DSP core with a CLA coprocessor, enabling concurrent control and computation. The device supports functional safety features and is AEC-Q100 qualified for automotive use. It operates from a 3.3V supply. Typical applications include automotive traction inverters, on-board chargers, solar inverters, and industrial motor drives. The high-resolution PWM and ADC capabilities make it suitable for high-frequency power conversion. For design, ensure robust decoupling on the VDD and VDDIO pins with 0.1uF and 10uF capacitors close to the package. Use the onboard temperature sensor for thermal monitoring.

USD $8.50 재고 있음
TMS320F28P559SJ-Q1 - 150MHz C2000 MCU 1.1MB Flash | Texas Instruments
TMS320F28P559SJ-Q1

TMS320F28P559SJ-Q1 - 150MHz C2000 MCU 1.1MB Flash | Texas Instruments

The Texas Instruments TMS320F28P559SJ-Q1 is an automotive-qualified C2000 real-time 32-bit microcontroller running at 150 MHz, integrating a C28x CPU with a Control Law Accelerator (CLA), 1.1MB flash memory, five ADCs, Configurable Logic Blocks (CLB), AES hardware security, and an on-chip Neural Processing Unit (NPU). It is available in a 100-pin LQFP (14x14 mm) package such as the F28P559SJ9PZQ1. A real-time MCU is a microcontroller optimized for deterministic, low-latency execution of closed-loop control algorithms. Within the embedded processor hierarchy, the C2000 family sits at the top of the TI real-time control portfolio, bridging general-purpose MCUs and DSPs, and is the de facto industry standard for digital power and motor control. Key features include the 150 MHz C28x fixed-point core for single-cycle 32-bit multiply operations, the parallel CLA floating-point co-processor that offloads control loops to cut ISR latency, and five high-precision ADCs enabling simultaneous multi-phase current sampling. The NPU accelerates edge-AI tasks such as motor condition monitoring, while AES encryption supports secure firmware updates for automotive systems. The F28P55x architecture targets high power density and high switching-frequency power electronics, including GaN and SiC based converters. Integrated CLB blocks replace external CPLD logic for PWM augmentation, and the rich ePWM, eQEP, and communication peripheral set (CAN, SPI, SCI, I2C) supports complete digital control systems on one chip. According to TI datasheet SPRSP85D (April 2024, revised April 2026), the F28P55x series also adds Programmable Gain Amplifiers (PGA) and USB support relative to the F28003x series. Typical applications include automotive onboard chargers and traction inverters, solar string inverters, servo and BLDC motor drives, and DC-DC fast charging modules. The AEC-Q100 automotive qualification makes it suitable for automotive OEM and Tier-1 designs requiring functional-safety workflows. When designing with this device, allocate flash headroom for OTA software updates and use the TI C2000Ware SDK reference designs, which include digital power and InstaSPIN motor control libraries validated on this family. This page synthesizes distributor availability data, drop-in alternatives within the same 100-LQFP footprint, and practical design notes not found in the manufacturer datasheet, so engineers can evaluate the TMS320F28P559SJ-Q1 for digital power, motor control, and automotive edge-AI designs in one place.

견적 요청 재고 있음
TMS320F28P650SH-Q1 - 400 MIPS C2000 MCU with FPU64 | Texas Instruments
TMS320F28P650SH-Q1

TMS320F28P650SH-Q1 - 400 MIPS C2000 MCU with FPU64 | Texas Instruments

The Texas Instruments TMS320F28P650SH-Q1 is a real-time microcontroller from the C2000 family, designed for high-performance control applications. It features a single C28x CPU core combined with a Control Law Accelerator (CLA), delivering 400 MIPS at 200 MHz, and includes a floating-point unit (FPU64) for complex math. The device provides 768 KB of on-chip flash memory and a 16-bit analog-to-digital converter (ADC), making it well-suited for closed-loop control systems. The automotive-qualified (AEC-Q100) version in a 256-NFBGA (13x13) package ensures reliable operation in harsh environments. A C2000 real-time microcontroller is a specialized MCU optimized for control-loop processing in power electronics and motor drives. Unlike general-purpose MCUs, C2000 devices integrate high-speed ADCs, PWM generation units, and a hardware accelerator (CLA) to offload the CPU for faster response times. This makes them essential in applications like frequency inverters, electric vehicle traction, and grid power conversion. Key features include 400 MIPS performance with a dual-core architecture (C28x + CLA), FPU64 for single-cycle double-precision math, and 768 KB flash for extensive code storage. The 16-bit ADC provides high-resolution sensing, while the functional safety (FuSa) capability improves system reliability. The Q1 suffix indicates AEC-Q100 qualification, suitable for automotive applications. In terms of technical depth, the C28x CPU is a 32-bit fixed-point core with a Harvard architecture, while the CLA is a coprocessor that executes control algorithms in parallel with the CPU. The FPU64 enables double-precision floating-point operations, crucial for stabilization algorithms. The 256-NFBGA package offers a compact footprint with 256 balls, facilitating high-density PCB designs. Typical applications include industrial motor drives, solar inverters, electric vehicle powertrain, and grid-tied power converters. The 400 MIPS performance and high-resolution ADC make it ideal for high-frequency switching converters and servo control loops. When designing with this MCU, ensure adequate decoupling on the VDD and VDDA pins, and follow the recommended layout for the analog-to-digital converter reference. The CLA shares memory with the C28x, so proper synchronization is required to avoid data race conditions. For automotive revisions, maintain compliance with AEC-Q100 guidelines by closely following TI's reference designs.

USD $15.80 재고 있음
TMS320LF2406APZA - 16-Bit DSP 40MHz 64KB Flash MCU | TI
TMS320LF2406APZA

TMS320LF2406APZA - 16-Bit DSP 40MHz 64KB Flash MCU | TI

The Texas Instruments TMS320LF2406APZA is a 16-bit fixed-point digital signal controller from the C2000 C24x family, delivering 40 MIPS at a 40-MHz clock with a 25-ns instruction cycle, integrating 64KB (32K x 16) of on-chip flash memory in a 100-pin LQFP (14x14 mm) surface-mount package operating from a low-power 3.3-V supply. A digital signal processor (DSP) is a specialized microprocessor architected for high-speed real-time numeric computation. The C2000 family sits in the hierarchy of microcontrollers optimized for closed-loop embedded control, combining a DSP CPU core with microcontroller peripherals such as PWM timers, serial ports, and CAN. This hybrid design enables engineers to implement PID loops, field-oriented control (FOC), and power-conversion algorithms on a single chip. Key features include the TMS320C2xx CPU core with a 16x16-bit hardware multiplier, 32-bit accumulator, and barrel shifter; two event manager modules optimized for PWM generation with dead-band control for motor drives; and a CAN 2.0B communications module. The device is code-compatible with F243/F241/C242 and instruction-set compatible with F240/C240. Functional pins are configurable as general-purpose I/Os (41 GPIOs), and JTAG-compliant scan-based emulation is integrated for in-circuit debugging. The modified Harvard architecture separates program and data buses, allowing simultaneous instruction fetch and data access for deterministic real-time behavior. Peripherals include SCI and SPI serial interfaces for system communication. The 3.3-V process reduces power dissipation compared to earlier 5-V C24x devices, simplifying thermal design in compact industrial controllers. Flash supports in-system programming for field firmware updates. Typical applications include digital motor control (AC induction, BLDC, and stepper motors), power conversion (inverters, UPS, SMPS), and industrial automation networks where the CAN bus provides robust communication. Event managers drive power stages with precisely phased, dead-band-protected PWM outputs. Design tip: decouple the 3.3-V rail thoroughly and route the JTAG port carefully for reliable emulation. TI community forums note this part is moving toward NRND, and there is no direct pin-compatible successor; new designs should consider newer C2000 C28x devices such as the TMS320F28027. This page synthesizes distributor pricing, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for evaluating the TMS320LF2406APZA against modern C2000 C28x successors.

USD $10.75 재고 있음
TMS320LF2407APGEA - 16-Bit DSP 40MHz 64KB Flash MCU | Texas Instruments
TMS320LF2407APGEA

TMS320LF2407APGEA - 16-Bit DSP 40MHz 64KB Flash MCU | Texas Instruments

The Texas Instruments TMS320LF2407APGEA is a 16-bit fixed-point digital signal processor (DSP) from the C2000 C24x family, running at 40 MHz (40 MIPS) with 64KB (32K x 16) of on-chip flash memory, 2.5K x 16 data RAM, and a 3.3V supply, housed in a 144-pin LQFP (20x20 mm) package. A digital signal processor (DSP) is a specialized microprocessor optimized for real-time digital signal processing such as filtering, modulation, and closed-loop control. The TMS320LF2407APGEA belongs to the C2000 family of DSP microcontrollers, which occupy the control-focused branch of the broader microcontroller and embedded processor hierarchy. This hybrid architecture combines DSP math throughput with microcontroller peripherals, enabling single-chip implementation of high-performance control loops. Key features include the 16-bit C2xx core with a 32-bit accumulator and 16x16-bit hardware multiplier for single-cycle multiply-accumulate operations, two event managers (EVA and EVB) optimized for digital motor control, a CAN 2.0B communications module, SPI and SCI serial interfaces, up to 41 GPIO pins, a 10-bit ADC with 16 channels, a watchdog timer, and JTAG scan-based emulation for debugging. The flash memory supports in-system programming for field firmware updates. The enhanced TMS320 architecture delivers deterministic interrupt latency and fast context switching, essential for current-loop control in power electronics. Functional pins are configurable as general-purpose inputs/outputs (GPIOs) for maximum design flexibility. According to the TI TMS320LF2407A datasheet, the 240xA family also includes ROM devices that are fully pin-to-pin compatible with their flash counterparts, easing migration between volume builds. Typical applications include digital motor control (AC induction, BLDC, stepper), power conversion (inverters, UPS), industrial automation, and automotive networks using CAN. The event managers generate PWM with dead-band control for driving power switches, while the CAN module meets 2.0B specifications for networked systems. Design tip: decouple the 3.3V rail thoroughly and keep the ADC reference layout quiet; provide JTAG access for programming and debug. For new designs, TI recommends the higher-performance C2000 F28x generation such as the TMS320F2808 or TMS320F28335. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-10-11.

USD $7.80 재고 있음
TMS320LF6APZS - 16-Bit 40MHz DSP MCU | Texas Instruments
TMS320LF2406APZS

TMS320LF6APZS - 16-Bit 40MHz DSP MCU | Texas Instruments

The Texas Instruments TMS320LF2406APZS is a 16-bit fixed-point digital signal processor (DSP) microcontroller from the C2000 C24x family, operating at 40 MHz with 64KB (32K x 16) of on-chip Flash program memory and 5KB of data memory, housed in a 100-pin LQFP (PZS, 14x14 mm) package. The C24x generation integrates DSP throughput with microcontroller peripherals, enabling high-performance closed-loop digital motor control and power conversion in a single chip. It executes 40 million instructions per second (40 MIPS) while sustaining deterministic interrupt latency essential for real-time control loops. A digital signal processor (DSP) is a specialized microprocessor whose architecture is optimized for numeric-intensive algorithms such as the multiply-accumulate (MAC) operations that dominate motor-control, audio, and power-conversion math. The C2000 family sits at the intersection of microcontrollers and DSPs - inheriting deterministic interrupt and timer/peripheral infrastructure from the MCU world while exploiting the Harvard bus and hardware MAC of a DSP. Within the broader C2000 hierarchy, the LF240xA sits below the F28xx and F283xx floating-point generations and remains in production for cost-sensitive, fixed-point applications where the cycle budget comfortably fits within 40 MHz. Key features of the TMS320LF2406A include an event manager module optimized for three-phase PWM generation with dead-band insertion, a 10-bit ADC with conversion time suitable for current-sensing loops, CAN 2.0B interface, serial communications interface (SCI) and SPI ports, and a watchdog timer. The integrated peripherals remove the need for external logic to drive inverters or to digitize phase currents, lowering total BOM cost. The Flash-based LF2406APZS variant supports in-system reprogramming via JTAG, simplifying firmware iteration. Architecture-wise, the LF2406A uses a modified Harvard bus with separate program and data paths, six 16-bit auxiliary registers and an 8-level hardware stack, plus the C24x instruction set with single-cycle MAC. Power management includes 3.3V single-supply operation with on-chip voltage regulation, and several low-power modes are available. The 100-pin LQFP exposes GPIO, PWM channels, ADC inputs and serial buses while still fitting standard through-hole-friendly board outlines. Typical applications include digital motor control (BLDC, PMSM, AC induction, SRM drives), uninterruptible power supplies, solar inverters, automotive body and powertrain sub-systems, industrial automation variable-frequency drives, and switching power supply digital control loops. The on-chip event manager and ADC are tuned for 3-phase space-vector modulation at switching frequencies up to tens of kHz. When designing with the TMS320LF2406APZS, ensure that supply decoupling is placed within 5mm of each VDD/VSS pair, that analog and digital grounds are joined at a single point near the IC, and that JTAG lines are guarded against high-current switching traces. Compared with newer C2000 devices, code may need adaptation due to peripheral register differences. This page synthesizes distributor pricing, same- and cross-brand drop-in alternatives, lifecycle context, and practical design notes not found in the manufacturer datasheet alone.

USD $10.85 재고 있음
TMS320VC5416GGU160 - 160 MIPS Fixed-Point DSP, 144-BGA | TI
TMS320VC5416GGU160

TMS320VC5416GGU160 - 160 MIPS Fixed-Point DSP, 144-BGA | TI

The Texas Instruments TMS320VC5416GGU160 is a 16-bit fixed-point digital signal processor (DSP) based on an advanced modified Harvard architecture, delivering up to 160 MIPS at 1.6 V core voltage in a 144-ball MicroStar BGA (GGU) package. It runs at a 160 MHz clock cycle time of 6.25 ns, and integrates 128K x 16-bit on-chip RAM (8K program + 8K data + 112K unified) along with a three-bus data memory structure. The device also provides a 16-bit host-port interface (HPI), multi-channel buffered serial ports (McBSP), and a 16-bit external memory interface. A fixed-point DSP (Digital Signal Processor) is a specialized microprocessor whose architecture is optimized for the repetitive, multiply-accumulate (MAC) math operations at the heart of real-time signal processing. Unlike general-purpose microcontrollers, fixed-point DSPs expose multiple parallel memory buses, hardware MAC units, and deterministic interrupt latency, placing them in the taxonomy: DSP -> fixed-point DSP -> embedded processor -> semiconductor. The TMS320C54x family specifically targets low-power, high-throughput audio, telephony, and control applications, and the 5416 sits at the top of the C54x performance stack at its 160 MIPS rating. Key features of the TMS320VC5416GGU160 include a 40-bit ALU, two 40-bit accumulators, eight auxiliary registers with a dedicated arithmetic unit for circular buffering, an integrated PLL with software-programmable multipliers (×1, ×2, ×4, ÷2), and an enhanced 8/16-bit host-port interface (HPI8/HPI16). The 5416 also adds a 16-bit timer and a standard UART. Power management supports IDLE1, IDLE2, and IDLE3 low-power modes that consume as little as 1 mW in deep idle. The GGU package (12x12 mm, 0.8 mm pitch) provides thermal resistance around 38 C/W for surface-mount designs. The modified Harvard architecture separates program and data memory into independent buses, allowing the CPU to fetch an instruction, read two operands, and write a result in a single cycle - the parallel structure that makes the 5416 well-suited for FIR/IIR filters, Viterbi decoders, vocoders, and echo-cancellation routines. The 6.25 ns cycle time at 1.6 V makes it one of the fastest members of the C54x generation. The 23-bit program address bus and 16-bit external data address bus allow it to address up to 8M x 16 of program space and 64K x 16 of data space externally. Typical applications include VoIP gateways, speech codecs and voice-band processing, digital audio mixing consoles, hearing-aid DSP, modems and ADSL front-ends, industrial motor control, secure biometric authentication, and portable low-power DSP modules. The wide I/O voltage tolerance (3.3 V I/O) also enables straightforward interface to common peripherals like McBSP-connected codecs. When designing with the TMS320VC5416GGU160, ensure the core supply is regulated to 1.6 V (a TPS76350 or similar LDO may be used) and that the I/O supply is 3.3 V. The PLL reference must be sourced from a clean, low-jitter clock; jitter directly translates into instruction-cycle jitter. Decouple each VDD pin with a 0.1 µF ceramic cap placed within 2 mm of the ball. The GGU package is not user-reworkable - plan for socketed prototypes or BGA rework services during development.

USD $10.15 재고 있음
TMS32C6416EZLZA6E3 - 600MHz Fixed-Point DSP 532-FCBGA | TI
TMS32C6416EZLZA6E3

TMS32C6416EZLZA6E3 - 600MHz Fixed-Point DSP 532-FCBGA | TI

The Texas Instruments TMS32C6416EZLZA6E3 is a high-performance C64x fixed-point Digital Signal Processor (DSP) clocked at up to 600 MHz, delivering up to 4800 MIPS of processing throughput, packaged in a 532-ball FCBGA (23x23 mm) ZLZ package and rated for the extended industrial temperature range of -40C to +105C. A DSP (Digital Signal Processor) is a specialized microprocessor whose architecture is optimized for the mathematical operations common in signal processing - multiply-accumulate (MAC), FIR/IIR filtering, FFT, and convolution. Compared with general-purpose microcontrollers, DSPs feature wider datapaths, hardware MAC units, deterministic instruction cycles, and specialized memory architectures that sustain high data throughput. The C64x family specifically uses a VelociTI.2 Very Long Instruction Word (VLIW) architecture capable of issuing eight 32-bit instructions per clock cycle, making the C64x part of a hierarchy that runs: DSP -> VLIW DSP -> C6000 series -> C64x family -> TI digital signal processors. Key features include a VelociTI.2 VLIW core with eight functional units, dual 64-bit data paths per CPU on the C64x, integrated L1/L2 memory controller, a 32-bit EMIF for external SDRAM/SRAM, three multi-channel buffered serial ports (McBSPs), a 33-bit PCI interface, and dedicated VCP/TCP co-processors that accelerate 3G wireless channel decoding. According to TI product documentation, the ZLZ variant combines the C64x DSP core with on-chip L2 SRAM and a flexible set of peripherals. Typical applications include software-defined radio (SDR), 3G/4G baseband channel cards, real-time video transcoding, high-density voice/fax channel banks, professional audio processing, medical imaging front-ends, and military/aerospace signal intelligence. The PCI interface allows direct plug-in deployment on CompactPCI/cPCI carrier boards, while the EMIF and HPI support host-processor coupling. When designing with this device, allocate PCB area for the 532-ball FCBGA (1.0 mm pitch), provide at least four PCB layers with a continuous ground plane for thermal spreading, and follow TI's SPRA433 / SPRU401 guidance for JTAG, clock, and EMIF signal integrity. For new designs, consider the TMS320C6416T family which offers higher clock rates and is the recommended successor.

USD $131.50 재고 있음
TMS5701224CPGEQQ1 - Hercules Safety MCU, 160MHz R4F, 1.25MB Flash | Texas Instruments
TMS5701224CPGEQQ1

TMS5701224CPGEQQ1 - Hercules Safety MCU, 160MHz R4F, 1.25MB Flash | Texas Instruments

The Texas Instruments TMS5701224CPGEQQ1 is an AEC-Q100 qualified automotive-grade 16/32-bit RISC Flash microcontroller built on the ARM Cortex-R4F floating-point core with lockstep safety architecture, delivered in a 144-pin LQFP (PGE) 20x20 mm package. It operates at up to 160 MHz, integrates 1.25 MB Flash and 192 KB SRAM with ECC on both memories, and provides dual 12-bit ADCs, multiple CAN, LIN, SPI and UART interfaces for ASIL-D capable automotive and industrial safety systems. A safety MCU (Microcontroller Unit) is a processor IC that integrates a CPU, Flash, SRAM and safety peripherals with built-in diagnostic and redundancy features designed to meet functional-safety requirements such as ISO 26262 (ASIL-D) or IEC 61508 (SIL 3). Within the broader system hierarchy, the TMS5701224CPGEQQ1 belongs to the MCU -> microcontroller -> embedded processor -> semiconductor IC category. It is engineered specifically for safety-critical applications where single-point faults must be detected and the system must remain in a safe state under hardware fault conditions. Key differentiating features include dual ARM Cortex-R4F CPUs operating in lockstep for fault detection, parity and ECC on Flash and SRAM, dedicated Built-In Self-Test (BIST) logic for CPU and memory, loopback capability on peripheral I/Os, an integrated Floating Point Unit (FPU), two 12-bit ADC modules with up to 24 channels, three CAN controllers, multiple LIN/UART/SPI/I2C ports, and an Enhanced Pulse Width Modulation (ePWM) module for motor and power-conversion control. From a technical depth perspective, the lockstep CPU compares outputs of two parallel cores cycle-by-cycle; any divergence triggers an error reaction within one clock, enabling ASIL-D systematic capability and hardware fault coverage. The ECC on Flash uses Single-Error Correction / Double-Error Detection (SECDED) while SRAM uses single-error correction for transient and permanent fault detection. The 1.25 MB Flash is split into a 1 MB program bank plus a 256 KB data Flash region for EEPROM emulation. Typical applications include automotive Electric Power Steering (EPS), Electronic Stability Control (ESC), Anti-lock Braking Systems (ABS), Advanced Driver Assistance Systems (ADAS) sensor fusion, Battery Management Systems (BMS), industrial Safety PLCs, and railway signaling where functional-safety certification is mandatory. When designing with this device, allocate a 4-layer PCB stackup with a continuous ground plane beneath the LQFP to dissipate the typical 1-2 W dissipation; route JTAG and trace signals on inner layers to avoid coupling on the safety island. Always use TI's SafeTI Diagnostic Library to validate IEC 61508 and ISO 26262 compliance claims for your end-equipment safety case. This page synthesizes distributor pricing, drop-in Hercules family alternatives, and practical design notes not consolidated in the TI datasheet alone, giving safety engineers a faster path from part selection to ASIL-D certification.

USD $12.10 재고 있음
TMS5701227CPGEQQ1 - 160MHz Cortex-R4F Dual-Core MCU | Texas Instruments
TMS5701227CPGEQQ1

TMS5701227CPGEQQ1 - 160MHz Cortex-R4F Dual-Core MCU | Texas Instruments

The Texas Instruments TMS5701227CPGEQQ1 is a high-performance automotive-grade 32-bit RISC flash microcontroller from the Hercules TMS570 safety MCU family, based on the ARM Cortex-R4F processor with a 160 MHz dual-core lockstep architecture and 1.25 MB of integrated flash plus 192 KB of data SRAM, housed in a 144-pin LQFP (PGE) package measuring 20 x 20 mm. A safety microcontroller (MCU) is a microcontroller designed for functional-safety-critical applications, integrating hardware diagnostics such as dual CPUs in lockstep, built-in self-test (BIST) for CPU and memory, ECC on flash and SRAM, and peripheral parity/loopback features. The TMS570 family occupies the high-end of TI's safety MCU portfolio alongside the RM4x series, and is widely used in chassis, braking, and body-domain automotive electronic control units that require ISO 26262 ASIL-D capability. Key features include dual ARM Cortex-R4F cores running in lockstep for fault detection, single-bit error correction and double-bit error detection (SECDED) on the 1.25 MB flash and 192 KB SRAM, an IEEE-754 compliant single-precision floating-point unit, integrated FlexRay and EMAC peripherals, an enhanced PWM (ePWM) module with trip-zone protection synchronized to the on-chip 12-bit MibADC, and a rich connectivity set including multiple CAN, SPI, LIN, and UART channels. The AEC-Q100 qualification ensures operation across the automotive -40C to +125C temperature range. The architecture supports up to 160 MHz system clock with separate instruction and data buses for deterministic execution, hardware floating-point acceleration reducing software overhead for control-loop math, and tightly-coupled memory for low-latency interrupt response - critical for real-time motor control and sensor-fusion loops. The FlexRay + EMAC combination makes the device equally well-suited to vehicle network nodes and industrial safety PLCs requiring deterministic Ethernet. Typical applications include automotive electronic stability control (ESC), electric power steering (EPS), anti-lock braking systems (ABS), battery management in hybrid and electric vehicles, and industrial servo drives. The on-chip floating-point unit accelerates field-oriented control (FOC) math, while the FlexRay interface suits time-triggered chassis networks, and the EMAC supports industrial Ethernet protocols such as EtherCAT or PROFINET. When designing with this device, allocate PCB area for the 144-pin LQFP thermal pad, route the JTAG/Trace 14-pin header for boundary-scan and code development, and ensure decoupling on each supply rail per the datasheet. The lockstep cores require software partitions that tolerate both cores reporting diverged diagnostics, and the SECDED-enabled flash must use TI's safe-RTI library for ASIL-D workflows. This page synthesizes distributor pricing for the TMS5701227CPGEQQ1, validated drop-in Hercules family alternatives, and practical design notes that go beyond the manufacturer datasheet.

USD $21.50 재고 있음
TMUX136RSER - 6GHz 2-Ch SPDT Analog Switch | TI UQFN-10
TMUX136RSER

TMUX136RSER - 6GHz 2-Ch SPDT Analog Switch | TI UQFN-10

The Texas Instruments TMUX136RSER is a high-performance 6-GHz, 2-channel, 2:1 (SPDT) analog switch with powered-off protection, packaged in a 10-pin UQFN (RSE, 2.0 x 1.5 mm) and rated for a typical on-resistance of 9.5 ohm. It supports a wide VCC range of 2.3 V to 4.8 V and offers 1.4 pF typical on-state capacitance, making it ideal for high-frequency signal multiplexing. What is an analog switch/multiplexer? An analog switch (also called a multiplexer or MUX) is a solid-state semiconductor device that routes analog or digital signals between multiple input/output paths under digital control, using MOSFET transistors as the switching elements. Analog switches sit within the broader hierarchy of interface ICs -> signal routing -> semiconductor ICs. The 2:1 (SPDT) configuration means each of the two independent channels can connect a common pin to one of two possible inputs, a topology commonly used for signal multiplexing, source selection, and USB/MIPI/LVDS switching. Key features include a -3 dB bandwidth of 6 GHz, 1.4 pF on-state capacitance (Con), 9.5 ohm typical on-resistance (Ron), and 1.8 V-compatible control inputs that interface directly with low-voltage processor GPIOs. Power-off protection forces all I/O pins into high-impedance mode when VCC is removed, protecting downstream components and preventing back-powering through the signal path. The flow-through pinout places inputs and outputs on opposite sides of the package, simplifying PCB routing. The architecture uses N-channel MOSFET pass transistors driven by a charge-pump-assisted gate driver, which achieves low Ron flatness across the input signal range and supports bidirectional signal paths. The 6 GHz bandwidth enables pass-through of high-speed differential protocols such as USB 2.0, MIPI DSI/CSI, and LVDS without significant insertion loss. Typical applications include tablet and notebook signal multiplexing, smartphone MIPI/DSI switching, USB 2.0 high-speed signal routing, and audio signal path selection. The device also finds use in test equipment and instrumentation where high-bandwidth signal multiplexing is required. When designing with this device, observe the absolute maximum ratings for analog signal voltage. Use controlled-impedance PCB traces (typically 50 ohm single-ended or 90 ohm differential) for high-frequency signals to preserve signal quality at the rated 6 GHz bandwidth. This page synthesizes distributor pricing, drop-in alternatives from TI and competitors, and practical design notes not found in the manufacturer datasheet alone.

USD $0.38 재고 있음
TMUX7208 - 44V Latch-Up Immune 8:1 MUX | Texas Instruments
TMUX7208

TMUX7208 - 44V Latch-Up Immune 8:1 MUX | Texas Instruments

The Texas Instruments TMUX7208 is a precision 8:1 single-channel multiplexer designed for high-voltage, high-performance signal routing. It operates from a single supply of 4.5V to 44V, dual supplies of ±4.5V to ±22V, or asymmetric supplies such as VDD=12V and VSS=-5V. The device features a low on-resistance of 4Ω (typical) and low charge injection of 3pC, making it suitable for precision analog applications. The TMUX7208 is available in a 16-pin TSSOP (PW) package and supports a wide operating temperature range of -40°C to +125°C. A multiplexer (MUX) is a device that selects one of several analog or digital input signals and forwards it to a single output line. The TMUX7208 is an analog multiplexer, specifically an 8:1 configuration, meaning it routes one of eight input channels to a common output based on the state of three address pins and an enable pin. This functionality is essential in data acquisition systems, test equipment, and industrial automation where multiple sensors or signals need to be sampled sequentially by a single ADC or measurement circuit. Key features of the TMUX7208 include latch-up immunity, which prevents damage from overvoltage or ESD events, and 1.8V logic-compatible inputs, allowing direct interface with low-voltage microcontrollers without level shifters. The device supports high current up to 300mA (max), making it robust for various loads. The low on-resistance and charge injection ensure minimal signal distortion and glitches during switching. The TMUX7208 uses a precision architecture with a break-before-make switching mechanism, preventing momentary shorting between channels. The device also features an enable pin that, when low, disconnects all channels, providing a high-impedance state. This is useful for power-down or isolation scenarios. The wide supply range and latch-up immunity make it ideal for industrial and automotive environments where voltage transients are common. Typical applications include data acquisition systems, test and measurement equipment, industrial process control, and battery monitoring systems. The TMUX7208 can be used to multiplex multiple sensor inputs into a single ADC, reducing component count and cost. Its high-voltage capability allows direct connection to 24V industrial buses without additional level shifting. When designing with the TMUX7208, ensure that the supply voltages are within the specified range and that the input signals do not exceed the supply rails. Proper decoupling capacitors on the supply pins are recommended to minimize noise. The address and enable pins should be driven with logic levels compatible with 1.8V to 5V, as the device is 1.8V logic compatible.

USD $1.85 재고 있음
TMUX8108 - 100V Flat RON 8:1 MUX | Texas Instruments
TMUX8108

TMUX8108 - 100V Flat RON 8:1 MUX | Texas Instruments

The TMUX8108 is a modern high-voltage analog multiplexer from Texas Instruments, offering a single-ended 8:1 configuration with flat on-resistance (RON) and latch-up immunity. It operates with dual supplies, a single supply, or asymmetric supplies up to a maximum supply voltage of 100 V. The device supports bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins, and all logic inputs support 1.8 V, 3.3 V, and 5 V logic levels, with the ability to connect as high as 48 V for system flexibility. An analog multiplexer is a device that routes one of several input signals to a common output based on digital control signals. In a single-ended 8:1 configuration, the TMUX8108 selects one of eight input channels and connects it to a single output. This functionality is essential in data acquisition systems, test equipment, and industrial automation where multiple sensors or signals need to be sampled sequentially by a single ADC or measurement circuit. The multiplexer acts as a signal router, enabling efficient use of expensive analog-to-digital converters and reducing component count. Key features of the TMUX8108 include a flat RON of 50 ohm, which minimizes distortion and ensures consistent performance across the input voltage range. The device provides latch-up immunity, preventing damage from overvoltage or overcurrent conditions. It supports a wide supply range up to 100 V, making it suitable for high-voltage industrial and automotive applications. The logic inputs are compatible with 1.8 V, 3.3 V, and 5 V systems, allowing direct interface with modern microcontrollers without level shifters. Technically, the TMUX8108 is built on a high-voltage CMOS process that enables low leakage currents and fast switching times. The flat RON characteristic is achieved through careful design of the switch architecture, ensuring that the on-resistance remains nearly constant across the entire analog input range. This reduces signal distortion and improves accuracy in precision measurement systems. The device also features break-before-make switching to prevent momentary shorting of channels during transitions. Typical applications include data acquisition systems, automated test equipment, industrial process control, and battery monitoring systems. In data acquisition, the TMUX8108 allows a single ADC to sample multiple sensor channels, reducing cost and board space. In battery monitoring, it can route individual cell voltages to a measurement circuit, enabling accurate state-of-charge estimation. The high-voltage capability makes it ideal for automotive 48 V systems and industrial 24 V or 48 V buses. When designing with the TMUX8108, ensure that the supply voltages are within the absolute maximum ratings and that the logic control signals are properly referenced to the logic supply. The device requires careful PCB layout to minimize parasitic capacitance and maintain signal integrity, especially in high-frequency applications. Additionally, consider the on-resistance and leakage current when calculating system accuracy, as these parameters affect the overall measurement error.

USD $2.19 재고 있음
TMUX8108PWR - 100V Flat RON 8:1 Analog MUX | Texas Instruments
TMUX8108PWR

TMUX8108PWR - 100V Flat RON 8:1 Analog MUX | Texas Instruments

The Texas Instruments TMUX8108PWR is a 100-V rated, flat on-resistance, single 8:1 (single-ended) analog multiplexer housed in a 16-pin TSSOP (PWR) package. It delivers a consistent on-resistance of approximately 50 ohm across the full analog signal range and supply conditions, supports single, dual, or asymmetric supplies up to 100 V total, and features latch-up immunity plus 1.8-V-compatible logic inputs. An analog multiplexer is a switching IC that routes one of several analog signal inputs to a single common output under digital control, forming part of the broader family of analog switches within signal-chain and power-management integrated circuits. Multiplexers are essential wherever many sensors, test points, or signal sources share a single downstream amplifier, ADC, or measurement instrument, saving board area, cost, and channel count on data converters. Key differentiating features of the TMUX8108 include its 100-V maximum supply rating, far above the 36 V ceiling of conventional CMOS multiplexers, its flat RON characteristic that minimizes signal-dependent gain error across the signal range, and latch-up immunity that protects the device in harsh industrial and medical environments where voltage transients are common. Control logic accepts 1.8 V, 3.3 V, and 5 V levels and, according to TI product documentation, logic inputs can be driven as high as 48 V, giving designers exceptional flexibility in interfacing with mixed-voltage systems. The device supports bidirectional analog and digital signals on the source (Sx) and drain (D) pins and provides break-before-make switching to prevent momentary channel shorting. Consistent analog parametric performance is maintained across the entire supply voltage range, simplifying design reuse from low-voltage to high-voltage systems. Typical applications include industrial programmable logic controller analog input modules, battery test and formation equipment, medical diagnostic instrumentation front ends, and automated test equipment (ATE) signal routing, all of which benefit from the high supply ceiling and rugged latch-up immunity. Designers should observe the total supply constraint of 100 V across VDD and VSS and verify signal swing stays within the supply rails; the flat RON makes channel-to-channel matching predictable even at high common-mode voltages. This page synthesizes verified distributor data, drop-in alternatives, and practical design guidance not found in the manufacturer datasheet, with pricing referenced as of 2026-09-03.

USD $2.05 재고 있음
TMUX8108RUMR - 100V 8:1 Analog Mux, 48Ohm | Texas Instruments
TMUX8108RUMR

TMUX8108RUMR - 100V 8:1 Analog Mux, 48Ohm | Texas Instruments

The Texas Instruments TMUX8108RUMR is a 100 V, flat RON, single 8:1 analog multiplexer with latch-up immunity and 1.8 V logic compatibility, housed in a 16-pin WQFN (4x4 mm, RUM) package with a typical on-resistance of 48 ohm. An analog multiplexer is a switching IC that routes one of several analog input signals to a single output channel under digital control. Within the signal-chain hierarchy, it sits between sensors or signal sources and amplifiers, ADCs, or measurement front ends, acting as a electronically controlled switch matrix. Multiplexer ICs belong to the broader family of analog switches, which themselves are part of the interface and signal-routing layer of power and data acquisition systems. Key features of the TMUX8108 include support for dual, single, or asymmetric supplies up to a maximum supply voltage of 100 V, low and flat on-capacitance behavior across the signal range, low OFF leakage current, and robust latch-up immunity that protects the device in harsh industrial environments. The 1.8 V-compatible logic inputs allow direct interfacing with modern low-voltage microcontrollers and FPGAs without level shifting. Technically, the TMUX810x family provides consistent analog parametric performance across the entire supply voltage range, meaning RON, leakage, and switching behavior remain stable whether the part runs from plus/minus supplies or a single high-voltage rail. This flat RON characteristic minimizes signal-dependent gain error in precision measurement paths, a common weakness of older high-voltage mux architectures. Typical applications include industrial programmable logic controller (PLC) analog input modules, automated test equipment (ATE) signal routing, battery test and formation systems operating at high cell voltages, and high-voltage data acquisition front ends. The 8:1 configuration suits multi-channel monitoring where several sense points share one precision ADC. A key design consideration is supply configuration: because the device accepts up to 100 V total supply, designers should verify signal swing stays within the supply rails and account for on-resistance times channel-current voltage drops in error budgets. This page synthesizes distributor pricing, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet, giving engineers a complete selection resource in one place.

USD $8.11 재고 있음
TMUXHS4412IRUAR - 20Gbps 4-Ch 2:1/1:2 Mux/Demux | Texas Instruments
TMUXHS4412IRUAR

TMUXHS4412IRUAR - 20Gbps 4-Ch 2:1/1:2 Mux/Demux | Texas Instruments

The Texas Instruments TMUXHS4412IRUAR is a 4-channel, 20 Gbps bidirectional differential 2:1/1:2 multiplexer/demultiplexer in a 42-pin WQFN (RUA, 3.5 mm x 9 mm) package with exposed thermal pad, providing an 8 ohm on-state resistance and a typical -3 dB bandwidth of 13 GHz across each high-speed lane. The device supports USB 3.2 Gen 2x2, USB 3.2 Gen 1, USB 2.0, DisplayPort 1.4, SATA, PCIe Gen 3, SAS, and MIPI DSI/CSI by routing two differential sources to a single differential sink or vice versa with sub-130 ns propagation delay and 50 ps intra-pair skew. A high-speed multiplexer/demultiplexer (mux/demux) is a passive analog switch that selects one of multiple differential input pairs to a single output pair, enabling a host controller to share one PHY across two connectors, two PHYs across one connector, or to switch between redundant high-speed data paths. In the signal chain hierarchy the mux/demux sits between the protocol physical layer (PHY) and the connector, providing galvanic isolation between channels while preserving signal integrity at multi-gigabit NRZ and PAM3/PAM4 signaling rates. The TMUXHS4412 implements bidirectional switching so the same device serves either mux (2:1) or demux (1:2) topology without firmware configuration. Key differentiating features include 20 Gbps per-channel data rate (enabling USB 3.2 Gen 2x2 with two channels aggregated), 50 ps intra-pair skew, 8 ohm RON, 0.45 pF typical on-capacitance, sub-130 ns propagation delay, and dual supply support with 1.71 V to 1.98 V core and 3.0 V to 3.6 V I/O. The 42-pin WQFN (RUA) package provides a 31 C/W thermal pad-to-ambient resistance and supports -40 C to +105 C industrial operation. The architecture uses a pair of differential CMOS pass gates per channel with an integrated charge pump to maintain low RON across the full signal swing, plus on-chip termination resistors selectable through SEL pins. The bidirectional design means the same part handles both upstream and downstream switching, simplifying inventory and reducing PCB layout differences between mux and demux placements. Typical applications include USB Type-C port multiplexers, DisplayPort dual-mode source switching, PCIe lane failover, SATA port multipliers, and front-panel USB-C routing on motherboards, docking stations, and embedded computing platforms. The wide 3.0 V to 3.6 V supply range makes it compatible with both 3.3 V I/O rail and modern sub-1.8 V core supplies. When designing with the TMUXHS4412, route the high-speed differential pairs as 90 ohm differential impedance with length matching to within 5 mils, place decoupling capacitors within 2 mm of each supply pin, and solder the exposed thermal pad to a thermal land on a high-K board to maintain the full -40 C to +105 C temperature range without additional vias. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that are not consolidated in the manufacturer datasheet, including 8 ohm RON and 13 GHz bandwidth values verified from the TI TMUXHS4412 datasheet.

USD $2.91 재고 있음
TMUXHS4446RETR - USB-C 10Gbps Alt Mode Crossbar Mux | Texas Instruments
TMUXHS4446RETR

TMUXHS4446RETR - USB-C 10Gbps Alt Mode Crossbar Mux | Texas Instruments

The Texas Instruments TMUXHS4446RETR is a high-speed bidirectional passive crosspoint switch (crossbar/Xbar) that switches USB 3.2 Gen2 SuperSpeed and DisplayPort 1.4/2.1 signals up to 10Gbps UHBR10 over a USB Type-C interface, housed in a 40-pin WQFN (6x3 mm) package with a typical on-resistance of 7 ohm. A crosspoint switch, also called a crossbar mux, is a type of analog signal switch that can route any of its input lanes to any of its output lanes in a non-blocking matrix fashion. Within the signal-routing hierarchy, it sits above simple SPDT analog switches and USB 2:1 muxes, offering full lane-level flexibility for multi-protocol interfaces. Crossbar muxes are key building blocks of USB-C Alternate Mode systems, where a single reversible connector must carry either USB SuperSpeed data or DisplayPort video depending on negotiation. Key features include support for 10Gbps data rates compliant with USB 3.2 Gen2 and DisplayPort UHBR10, a passive switch architecture that adds no signal retiming or protocol awareness, integrated switching for the low-speed SBU (Sideband Use) lines used by the DisplayPort auxiliary channel, and a 7-ohm typical on-resistance that minimizes insertion loss. The 4-circuit, 4:4 configuration maps directly onto the four SuperSpeed differential lane pairs of a USB-C connector. The passive, bidirectional architecture means the device does not distinguish between source and sink: signals pass equally well in either direction, simplifying orientation and role handling in USB-C designs. Wide, flat differential lanes are laid out inside the WQFN-40 to maintain controlled impedance and low crosstalk at multi-gigabit speeds. Typical applications include USB-C docking stations, laptop and tablet USB-C Alternate Mode ports, USB-C monitors and display adapters, and multi-function hubs that multiplex USB 3.2 Gen2 and DisplayPort 1.4/2.1 over the same connector. Design consideration: at 10Gbps, keep the passive high-speed lanes short, impedance-controlled, and decoupled from the switching-control logic; insertion loss and via stubs matter more than with low-speed muxes. This page synthesizes distributor pricing, package data, application guidance, and design notes not found in a single manufacturer datasheet.

USD $1.32 재고 있음
TMUXHS4446RETT - USB-C 10Gbps Alt Mode Crossbar Mux | Texas Instruments
TMUXHS4446RETT

TMUXHS4446RETT - USB-C 10Gbps Alt Mode Crossbar Mux | Texas Instruments

The Texas Instruments TMUXHS4446RETT is a high-speed bidirectional passive crosspoint switch (crossbar, Xbar) that switches USB 3.2 Gen2 SuperSpeed and DisplayPort 1.4/2.1 (up to 10 Gbps UHBR10) signals over a USB Type-C interface, with 7-ohm typical on-resistance, a 6x4 mux configuration, and a 40-pin WQFN (6 mm x 3 mm) package with exposed pad. A crosspoint switch or crossbar mux is a switching matrix in which any input lane can be routed to any output lane, giving system designers complete flexibility in high-speed signal routing. In the USB Type-C ecosystem, crossbar switches sit between the SuperSpeed/sideband pins of the USB-C connector and a device's USB 3.2 or DisplayPort controller, resolving the orientation and alternate-mode ambiguity that the reversible Type-C connector introduces. As such, it belongs to the analog switch and multiplexer family within signal-switching ICs, sitting between the USB-C connector and the SoC in the system hierarchy. Key features include support for USB 3.2 Gen2 (10 Gbps) SuperSpeed lanes and DisplayPort 1.4/2.1 UHBR10 signaling, integrated low-speed SBU switching for DisplayPort auxiliary (AUX) channels, and a passive, bidirectional switch architecture that adds minimal signal degradation. The 7-ohm typical on-resistance minimizes insertion loss impact on high-speed differential pairs, helping preserve eye diagrams at 10 Gbps rates. Architecturally, the TMUXHS4446 is a passive FET-switch crossbar rather than an active redriver or retimer. This means it consumes minimal power, introduces no added latency, and does not regenerate the signal, so total channel budget must account for its on-resistance and capacitive loading. Passive switching makes it ideal when the host and device have adequate link budget and no equalization is required. Typical applications include USB Type-C docks and dongles that switch between USB 3.2 and DisplayPort alternate mode, notebooks and tablets routing DP 1.4/2.1 lanes to a USB-C port, monitors with USB-C inputs, and smartphone or mobile-compute platforms requiring USB-C orientation and alternate-mode switching. A key design consideration is that because the part is passive, total insertion loss across the connector, PCB traces, and switch must fit the USB 3.2 Gen2 or DP UHBR10 channel budget; keep routing short and impedance-controlled. Follow TI's datasheet layout guidance for the exposed-pad WQFN. This page synthesizes distributor pricing data, drop-in alternative analysis, and practical design notes that go beyond the manufacturer datasheet, giving engineers a single citable reference for the TMUXHS4446RETT.

견적 요청 재고 있음
TP2274 - 36V Quad 7MHz EMI-Hardened CMOS Op-Amp | 3PEAK
TP2274

TP2274 - 36V Quad 7MHz EMI-Hardened CMOS Op-Amp | 3PEAK

The 3PEAK TP2274 is a quad-channel, 36-V CMOS operational amplifier featuring EMI hardening (EMIRR of 84 dB at 900 MHz), 7-MHz gain-bandwidth product, 20-V/μs slew rate, and rail-to-rail output (RRO) swing in a 14-pin SOIC package. It operates from a single 2.7 V to 36 V supply (or dual ±1.35 V to ±18 V) and is unity-gain stable driving up to 100 pF of capacitive load, making it suitable for I/V converters, active filters, and transducer front-ends. A CMOS operational amplifier is a high-gain DC-coupled differential amplifier built on a complementary metal-oxide-semiconductor process. CMOS op-amps combine low input bias current (sub-pA to pA range), rail-to-rail output capability, and low quiescent current, and they form a hypernym hierarchy of linear IC -> amplifier IC -> operational amplifier -> CMOS op-amp. The TP2274 family (TP2271 single, TP2272 dual, TP2274 quad) is targeted at precision, low-voltage applications where EMI immunity is required, replacing general-purpose bipolar parts in noise-dense environments such as industrial sensor conditioning and motor-drive boards. Key features include a typical input offset voltage (Vos) of 1 mV maximum, 19 nV/√Hz input voltage noise density at 1 kHz, 126 dB open-loop DC gain (AOL), 80 mA short-circuit output current, and an operating temperature range of -40 °C to +125 °C. The TP2274 also offers 2 µV/°C offset drift and 900 µA typical quiescent current per amplifier, balancing speed with low power consumption for portable instrumentation. Internally, the TP2274 uses a CMOS input stage with an EMI-hardened front end and a class-AB output stage for rail-to-rail swing. Its 7-MHz GBW and 20-V/μs slew rate are tuned for medium-speed signal-chain applications rather than high-precision instrumentation, and the 84 dB EMIRR at 900 MHz allows the amplifier to reject RF interference from nearby switching regulators and wireless modules without rectification-induced DC errors. Typical applications include current-sensing I/V converters, multi-channel sensor signal conditioning, active filters in audio front-ends, and general-purpose signal amplification in industrial, automotive, and consumer systems. A common companion part is a high-precision ADC such as the ADS1256 for downstream digitization, or a low-dropout regulator to feed the analog supply rail. When designing with this device, keep input and feedback traces short to preserve the 7-MHz bandwidth and minimize parasitic capacitance, and add a small series resistor (10-50 Ω) at the output when driving more than a few hundred picofarads. Use a stable, low-noise supply on the analog rail to fully exploit the EMIRR figure. This page synthesizes distributor pricing, drop-in cross-references, and practical design notes not found in the manufacturer datasheet.

USD $0.19 재고 있음
TPLD2001 - 18-GPIO PLD with I2C/SPI | Texas Instruments
TPLD2001

TPLD2001 - 18-GPIO PLD with I2C/SPI | Texas Instruments

The TPLD2001 is a programmable logic device (PLD) from Texas Instruments featuring 18 GPIOs and a selectable I2C/SPI interface. It is supplied in a 20-VSSOP package and integrates configurable macro-cells built from 2-, 3-, and 4-bit lookup tables (LUTs) together with sequential logic and analog blocks. The device operates from 1.71V to 5.5V over -40°C to 125°C and is qualified for automotive applications. A programmable logic device is an integrated circuit whose logic function is defined by the user after manufacturing. In the TPLD family, InterConnect Studio is used to configure the non-volatile memory, either by emulating OTP memory or permanently programming the one-time programmable fuse. PLDs sit between standard fixed-function logic and large CPLDs/FPGAs, providing a compact, low-power way to integrate glue logic, timing, reset, power sequencing, and I/O expansion functions. Key features include 18 GPIOs, 14 macrocells, and a configurable I2C/SPI port for system communication and in-system configuration. The 2/3/4-bit LUT macrocells allow flexible combinatorial logic; sequential blocks support timers, delays, and state machines. The wide 1.71V to 5.5V supply range permits operation from Li-ion batteries, 3.3V rails, or 5V industrial buses, and the -40°C to 125°C temperature range covers automotive and industrial environments. The device's analog blocks provide voltage monitoring and reset generation, eliminating external supervisor ICs. Its low power and compact 20-VSSOP package make it suitable for space-constrained designs. Because logic functions are configured in the OTP memory and the same base part can be used across many designs, inventory can be consolidated. The selectable I2C/SPI port also allows integration into microcontroller-based systems for status readback or dynamic reconfiguration when the non-volatile logic is emulated. Typical applications include timing delay generation, voltage monitoring and reset generation, power sequencing, I/O expansion, and glue logic consolidation in automotive body electronics, industrial sensors, and consumer devices. Designers can use InterConnect Studio to implement and simulate logic before programming. When designing with TPLD2001, plan the OTP programming step during production and verify I/O assignments before programming, because OTP cannot be changed after the permanent fuse is blown.

견적 요청 재고 있음
TPS4141-Q1 - 1200V Configurable Divider | Texas Instruments
TPS4141-Q1

TPS4141-Q1 - 1200V Configurable Divider | Texas Instruments

The Texas Instruments TPS4141-Q1 is a high-voltage precision matched resistor divider with an integrated programmable-gain amplifier (PGA), designed for accurate high-voltage measurement in automotive and industrial applications. The device supports input voltages up to 1200V and provides four configurable divider ratios via the DIV0 and DIV1 inputs. It is available in a 10.30mm × 10.30mm SOIC-11 (DWQ) package, optimized for space-constrained automotive systems. A high-voltage precision resistor divider is a specialized analog front-end IC that scales high-voltage inputs down to a safe range for downstream ADC or microcontroller measurement. It combines matched precision resistors with a PGA to maintain accuracy across temperature and voltage extremes, eliminating the need for discrete resistor networks and trimming. This architecture reduces board area and improves measurement reliability in high-voltage environments. The TPS4141-Q1 integrates a high-voltage switch that connects or disconnects the high-voltage sense pin, providing uni-directional current blocking when disconnected. The programmable-gain amplifier supports four divider ratios using DIV0 and DIV1, enabling flexible measurement scaling for different voltage ranges. External precision reference voltage can be supplied from REF to HVGND for bi-directional voltage measurement, and switching between uni-directional and bi-directional sensing during operation is possible. The device is AEC-Q100 qualified for automotive applications, ensuring robust performance over a wide temperature range. Its high-voltage capability and integrated switch make it suitable for battery management systems, traction inverters, and industrial motor drives where precise voltage monitoring is critical. The integrated PGA and matched resistors provide high accuracy, reducing system calibration overhead. Typical applications include electric vehicle battery pack voltage monitoring, solar inverter DC bus sensing, and industrial 24V/48V system voltage measurement. The high-voltage switch allows the sense line to be disconnected for safety or power saving, while the divider ratios allow the same device to serve multiple voltage ranges. Designers should ensure proper PCB clearance and creepage distances for 1200V operation, and use the external REF for bi-directional measurements when needed.

견적 요청 재고 있음