집적 회로

하위 카테고리

📁 ADC/DAC 2518 제품 📁 증폭기 IC 793 제품 📁 오디오 코덱 16 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 287 제품 📁 DSP 962 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6666 제품 📁 인터페이스 IC 1568 제품 📁 LED 드라이버 1 제품 📁 로직 IC 305 제품 📁 메모리 IC 875 제품 📁 마이크로컨트롤러 18688 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (32725)

S912XDT256F1CAL - 16-bit S12X MCU 256KB 80MHz | NXP
S912XDT256F1CAL

S912XDT256F1CAL - 16-bit S12X MCU 256KB 80MHz | NXP

The NXP S912XDT256F1CAL is a 16-bit automotive-qualified HCS12X (S12X core) microcontroller delivering 80 MHz bus performance, 256KB of on-chip Flash memory, and integrated XGATE co-processor functionality in a 112-pin LQFP (20x20 mm) surface-mount package, rated for -40C to +85C operation. A 16-bit microcontroller is a single-chip computing device whose CPU processes 16-bit-wide instructions and data, sitting between entry-level 8-bit MCUs and 32-bit MCUs in the embedded hierarchy. The HCS12X family from NXP (originally Freescale Semiconductor) is an upward-compatible evolution of the widely adopted HCS12 architecture, retaining the same interrupt stacking and programmer model while adding an instruction queue, enhanced indexed addressing, and an expanded instruction set. Key features of the S912XDT256F1CAL include the 16-bit S12X CISC CPU operating at 80 MHz, 256KB (256K x 8) of Flash program memory, automotive-grade qualification, and industrial temperature coverage to +85C. The device is pin-compatible within the S12XD family, allowing Flash-size migration between variants on the same PCB. Peripherals in the S12XD family (such as CAN, SCI, SPI, and PWM modules) support typical automotive and industrial networking workloads. The S12X core uses a CISC architecture with an instruction queue that improves bus utilization, and the enhanced indexed addressing modes reduce code size in control loops. The XGATE peripheral co-processor available on S12XD devices offloads interrupt servicing and communication handling from the main CPU, effectively boosting real-time throughput without raising core frequency. Typical applications include automotive body control modules, gateway nodes, HVAC controllers, and industrial automation systems where a proven, qualified 16-bit platform with CAN connectivity is required. The -40C to +85C industrial range suits under-hood adjacent and factory-floor environments. Design consideration: this part is marked End of Life by NXP, so new designs should plan a migration path to the S12XE/S12XS families or NXP 32-bit parts, while existing designs can secure last-time-buy stock. This page synthesizes distributor availability data, drop-in family alternatives, lifecycle status, and practical design notes not found in a single manufacturer source.

견적 요청 재고 있음
S912XDT256F1MAL - 16-bit MCU, 256KB Flash, 80MHz | NXP
S912XDT256F1MAL

S912XDT256F1MAL - 16-bit MCU, 256KB Flash, 80MHz | NXP

The NXP Semiconductors S912XDT256F1MAL is a 16-bit HCS12X microcontroller built on the S12X core, integrating 256KB of on-chip Flash and 16KB of RAM, operating at a 80MHz bus frequency. The device is housed in a 112-pin LQFP (20x20 mm) package with an automotive operating temperature range of -40C to +125C. It is supplied in Tray packaging and is qualified to AEC-Q100 standards for automotive and industrial environments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash/RAM), and a rich set of peripherals (timers, ADC, communication interfaces, GPIO) into one IC. The HCS12X is a 16-bit CISC architecture that is upward-compatible with the original HCS12 instruction set, adding an instruction queue, enhanced indexed addressing, and interrupt stacking identical to the HC12 programmer's model. Within NXP's product hierarchy, this device falls under 16-bit microcontrollers -> MCUs -> microcontrollers & processors -> semiconductors. The S12XD family specifically adds an XGATE coprocessor (DMA-style offload engine) to accelerate interrupt-driven I/O handling, which is critical in body and chassis automotive modules. Key features include the 256KB (256K x 8) program Flash, 16KB on-chip RAM, 80MHz maximum CPU frequency, multiple communication peripherals (CAN, SPI, SCI, I2C), enhanced capture timers, 8/10-bit ADC channels, and a JTAG/BDM debug interface. The wide -40C to +125C automotive-grade temperature range supports deployment in under-hood automotive ECUs, body controllers, and industrial automation PLCs. The S912XDT256F1MAL uses a unified Flash memory architecture with hardware ECC, supports in-application programming (IAP), and integrates an XGATE peripheral coprocessor that runs at twice the core speed for high-throughput interrupt servicing. The device also includes an enhanced periodic interrupt timer, pulse width modulator (PWM) outputs, and on-chip voltage regulation for single-supply operation. Typical applications include automotive body control modules, CAN-based chassis networks, industrial sensor aggregation nodes, building automation controllers, and any 16-bit embedded design that requires automotive-grade temperature tolerance combined with deterministic interrupt handling. When designing with this device, ensure adequate decoupling on the VDD/VSS pins (typically 100nF ceramic capacitors per supply pin placed as close to the IC as possible) and verify timing margins for CAN bus communication in noisy environments. The BDM debug interface should be brought out to a header for firmware development and field upgrades. This page synthesizes distributor stock and pricing, drop-in-compatible S12XD family alternatives, and practical design notes not found in the standalone NXP datasheet.

USD $15.82 재고 있음
S912XDT256F1MALR - 16-bit MCU, 256KB Flash, 80MHz | NXP
S912XDT256F1MALR

S912XDT256F1MALR - 16-bit MCU, 256KB Flash, 80MHz | NXP

The NXP S912XDT256F1MALR is a 16-bit HCS12X microcontroller with 256KB Flash memory, 80 MHz CPU speed, and automotive-grade temperature range (-40C to +125C), housed in a 112-pin LQFP (20x20 mm) package. It is a Tape-and-Reel packaged variant of the S912XDT256F1MAL designed for high-throughput automotive body and powertrain applications, delivering deterministic interrupt handling for safety-critical control loops. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, plus a rich set of peripheral interfaces (timers, ADC, communication controllers, GPIO) into one IC. The S912XDT256F1MALR belongs to the HCS12X family, an enhanced superset of the legacy HCS12 instruction set that preserves source-code compatibility while adding an instruction queue, enhanced indexed addressing, and interrupt stacking identical to the HCS12 programmer's model. In a broader taxonomy the device sits within the hierarchy microcontroller -> embedded processor -> semiconductor IC. Key features include 256KB of on-chip Flash program memory, 16KB of RAM, 80 MHz bus speed, the S12X CPU with efficient peripheral co-processing (XGATE co-processor typically available on this family), on-chip CAN, SCI, SPI, IIC, PWM, and a 12-bit ADC. The automotive temperature grade, AEC-Q100 compliance, and 5V-tolerant I/O make it well suited for engine-control units, body controllers, and gateway modules. An integrated background-debug-mode (BDM) interface allows in-circuit programming and real-time debug without an expensive emulator. The S12X core pairs a CISC-style CPU with a RISC-style peripheral co-processor that offloads interrupt-intensive tasks, freeing the main CPU to run control loops. Automotive qualification against AEC-Q100 and a junction temperature envelope supporting -40C to +125C enable placement in underhood or transmission-mounted ECUs. Extensive timer resources, an ATD (analog-to-digital) module, and CAN 2.0A/B controllers address powertrain messaging and analog sensor acquisition directly. Typical applications include engine and transmission control units, body control modules, gateway and chassis controllers, automotive HVAC controllers, and brushed DC motor control for seat or window actuators. Any vehicle network node requiring CAN connectivity and deterministic real-time response benefits from the S12X architecture. When designing with this device, allocate decoupling capacitors (typically 100 nF) close to every VDD/VSS pin pair and observe the 112-LQFP land pattern exactly - alternate pin-compatible S12X parts in different package styles are NOT drop-in for this footprint. Use the free NXP CodeWarrior or S32 Design Studio toolchains and the BDM interface for initial programming. This page synthesizes distributor pricing, S12X family drop-in alternatives, and practical PCB-layout notes not consolidated in the NXP datasheet.

USD $10.95 재고 있음
S912XDT256F1VAA - 16-bit HCS12X MCU, 256KB Flash, 80MHz | NXP
S912XDT256F1VAA

S912XDT256F1VAA - 16-bit HCS12X MCU, 256KB Flash, 80MHz | NXP

The NXP Semiconductors (formerly Freescale) S912XDT256F1VAA is a 16-bit HCS12X-family microcontroller built around the S12X CPU core, delivering 80MHz of CPU clock, 256KB of on-chip Flash, 14KB RAM and 4KB EEPROM in a 80-pin QFP (14x14 mm) automotive-grade package. It features the enhanced XGATE co-processor for I/O offload, dual CAN 2.0 A/B controllers, three SPI, eight SCI/UART, two I2C and a 16-channel 10-bit ADC, with an operating voltage range of 2.5V to 5.5V and a -40C to +105C industrial/automotive temperature rating. Background: A 16-bit MCU (microcontroller unit) is a single-chip computer integrating a processor, volatile and non-volatile memory, and configurable peripherals on one die. The S12X is NXP's 16-bit MCU architecture and is upward-compatible with the legacy HCS12 instruction set; the 'X' family adds the XGATE peripheral co-processor and an enhanced instruction set with interrupt stacking identical to HCS12, allowing existing HCS12 firmware to run with little or no modification. Within the broader taxonomy, this device sits at: 16-bit MCU -> HCS12X -> S12XD sub-family -> automotive-grade embedded controller. Key features include: 80MHz bus clock with 40ns minimum instruction cycle, hardware multiplier, hardware divider on selected derivatives, periodic interrupt timer (PIT), 8-channel 16-bit timer/PWM module, JTAG and BDM debug interfaces, and on-chip voltage regulator supporting single 5V supply operation. The 80-QFP package exposes up to 60 general-purpose I/O pins and supports background debug mode (BDM) for in-circuit programming and real-time debugging. Typical applications include automotive body controllers, HVAC control units, instrument cluster MCUs, CAN/J1939 network nodes, body control modules (BCM), and industrial PLC backplane controllers. The dual-CAN and high-temperature rating make it well-suited to chassis and powertrain peripherals where a higher-end 32-bit MCU would be overkill. Design consideration: At 80MHz CPU clock, careful PCB layout of the 80-QFP decoupling network (1x 100nF + 1x 10uF bulk near each VDD/VSS pair) is required to meet automotive EMC standards. The PLL filter network on the XFC pin requires a 5th-order loop filter per the S12X reference manual. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet alone.

USD $13.60 재고 있음
S912XDT256J1MAA - 16-Bit 80MHz 256KB MCU | NXP
S912XDT256J1MAA

S912XDT256J1MAA - 16-Bit 80MHz 256KB MCU | NXP

The NXP Semiconductors S912XDT256J1MAA is a 16-bit HCS12X microcontroller operating at up to 80 MHz, with 256 KB of embedded flash memory, supplied in an 80-pin QFP package measuring 14 mm by 14 mm. It belongs to the S12X automotive microcontroller family and combines a high-performance core, embedded memory, and external peripheral connectivity in a surface-mount package. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and I/O resources on one device. In the broader hierarchy, this MCU is an embedded processor and a semiconductor component designed for deterministic control, monitoring, communications, and automotive electronics. Its 16-bit architecture is suited to embedded tasks requiring efficient code execution, peripheral control, and real-time behavior without the complexity of a desktop processor. The verified distributor record identifies the part as an HCS12X device with 256 KB organized as 256 K by 8 bits of flash memory. It is listed at 80 MHz and in an 80-QFP package. A related Mouser listing for S912XDT256F1MAA identifies an S12X core, 256 KB flash, 80 MHz operation, and an automotive-qualified variant, but that related MPN is not treated as proof of every characteristic of S912XDT256J1MAA. Typical uses for this device family include automotive body and chassis electronics, motor and actuator control, sensor conditioning, vehicle communication modules, and industrial embedded controllers. The large pin count supports organized connections to external sensors, transceivers, memory, debug interfaces, and power-management circuitry. The 80-pin QFP also exposes more signal and interface resources than a smaller low-pin-count MCU package. Designers should select this part only after checking the manufacturer datasheet for memory map, peripherals, electrical limits, clocking, package drawings, exposed pads, and recommended application circuits. Because the supplied search results do not include a manufacturer PDF for the target MPN, the official datasheet URL and complete pin-level electrical specification set remain to be obtained. This page combines the verified distributor attributes with explicit data-availability notes rather than inferring unprovided values. This data record is intended to support procurement, initial architecture selection, and distributor comparison. It also identifies why the part belongs to the HCS12X embedded-control class, while preserving the distinction between verified facts and parameters that must be confirmed in the official technical documentation.

견적 요청 재고 있음
S912XDT384J1MAG - 16-bit S12X MCU, 384KB Flash, 80MHz | NXP
S912XDT384J1MAG

S912XDT384J1MAG - 16-bit S12X MCU, 384KB Flash, 80MHz | NXP

The NXP S912XDT384J1MAG is a 16-bit microcontroller from the S12X family featuring an HCS12X CPU core with 384KB of on-chip Flash memory and 80MHz maximum CPU clock, housed in a 144-pin LQFP (LFQFP) package. It is automotive-qualified (AEC-Q100) and operates across the -40C to +125C automotive temperature range, supporting 2.5V/5V supply rails for mixed-voltage system designs. A 16-bit MCU (microcontroller unit) is an integrated circuit containing a CPU core, program memory, RAM, and peripherals on a single die. The S12X architecture extends the classic HCS12 instruction set with an instruction queue, enhanced indexed addressing, and an enhanced instruction set, while remaining upward-compatible with the HCS12 programmer's model. MCUs in this class serve as the central processing element in automotive body, chassis, and powertrain ECUs, as well as industrial control modules. Key features of the S912XDT384J1MAG include the HCS12X CPU delivering 80 MIPS performance, 384KB of Flash for application code and data storage, multiple communication peripherals (typically including CAN, SPI, SCI, and I2C), a 16-bit timer module, and an external bus interface for memory expansion. The 144-pin LQFP package provides ample I/O for complex automotive networks, and the wide operating voltage range supports both 5V legacy and 3.3V peripheral domains. The S12X core uses a CISC architecture with an instruction queue that prefetches opcodes, enabling 80MHz operation while maintaining code-density advantages of the HCS12 instruction set. The interrupt stacking and programmer's model are identical to HCS12, allowing existing HCS12 firmware and toolchains to migrate with minimal code changes. Typical applications include automotive body controllers, gateway modules, lighting controllers, HVAC control units, and industrial CAN nodes. The 384KB Flash tier suits applications with substantial calibration tables or multiple software variants. When designing with this part, plan the CAN bus termination and ESD protection per automotive requirements. Decouple each VDD/VSS pair with a 100nF ceramic capacitor placed within 5mm of the pin, and route the external bus signals with matched impedance if high-speed external memory is attached. This page combines distributor pricing, drop-in alternatives from the same S12X family, and design considerations specific to the S912XDT384J1MAG, offering information beyond what the manufacturer datasheet alone provides.

USD $7.45 재고 있음
S912XDT512J1CAA - 16-bit HCS12X MCU 512KB Flash 80MHz QFP-80 | NXP
S912XDT512J1CAA

S912XDT512J1CAA - 16-bit HCS12X MCU 512KB Flash 80MHz QFP-80 | NXP

The NXP S912XDT512J1CAA is a 16-bit HCS12X microcontroller with 512 KB of Flash memory, an 80 MHz CPU, and a wide peripheral integration in an 80-pin QFP (14x14 mm) package qualified to -40C/+85C industrial and automotive-grade temperature ranges. It belongs to the MC9S12XD family and is upward object-code compatible with the legacy HCS12 instruction set while adding an instruction queue, enhanced indexed addressing, and interrupt stacking identical to HCS12, so existing HC12 firmware ports with minimal rework. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for code, RAM for data), and peripherals such as timers, ADC, communication controllers, and GPIO into one device. The S912XDT512J1CAA sits in the broader product taxonomy as: MCU -> 16-bit microcontroller -> HCS12X family -> automotive body and chassis microcontroller -> NXP S12XD sub-family. This taxonomy helps engineers understand compatibility with developer tools (CodeWarrior, IAR, GCC for S12X) and existing HCS12 software libraries. Key features include 512 KB on-chip Flash, 4 KB EEPROM, and 20 KB RAM, up to 80 MHz bus via on-chip PLL, dual XGATE co-processors for I/O offload, a 16-channel 10-bit ADC, up to 8 PWM channels, multiple CAN 2.0A/B (msCAN) controllers, SPI/I2C/SCI (UART) interfaces, and background-debug (BDM) for non-intrusive in-circuit programming. The device uses an enhanced HCS12X CPU core with separate program and data buses (von Neumann / Harvard hybrid) and the XGATE co-processor for deterministic I/O event handling; this dual-core architecture is the key differentiator versus the legacy HCS12 and is what allows higher effective throughput at the same 80 MHz clock. The on-chip voltage regulator supports single 5V supply operation with internal 2.5V core generation. Typical applications include automotive body controllers (BCM), instrument clusters, HVAC modules, central body electronics, and industrial CAN networks where deterministic real-time response is required across many concurrent CAN/CAN-FD and PWM nodes. Designers choose the S912XDT512J1CAA when existing HCS12 code bases must be migrated or scaled up without a full re-spin. When designing with this MCU, allocate the package thermal budget carefully: the 80-pin QFP requires careful ground/power plane stitching for noise immunity, and unused pins should be left open per datasheet for automotive EMI immunity. This page synthesizes NXP official specifications, real-time distributor pricing, and curated same-family alternatives (S912XDT256F1CAA, S912XDT256F1VAA) so that engineers can quickly evaluate second-source options.

USD $12.44 재고 있음
S912XEA128BCAA - 16-Bit 50MHz 128KB MCU | NXP
S912XEA128BCAA

S912XEA128BCAA - 16-Bit 50MHz 128KB MCU | NXP

The NXP S912XEA128BCAA is a 16-bit HCS12X microcontroller with an S12X CPU, 50 MHz bus speed, 128 KB of Flash memory, and a 32-bit S12X XGATE co-processor. It is supplied in an 80-pin QFP package measuring 14 mm by 14 mm. Verified product information identifies it as automotive qualified and specifies a -40 °C to +85 °C operating range. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The HCS12X family sits within the embedded-control hierarchy: microcontroller, embedded processor, semiconductor, and electronic component. The S12X core is suited to real-time motor, communications, and industrial-control tasks, while the XGATE co-processor can execute independent peripheral or data-handling tasks and improve overall throughput. Key verified features include a 50 MHz S12X CPU, a 128 K × 8 Flash configuration, and an XGATE co-processor. The listed integrated peripherals include a 12-bit ADC with a 3 µs conversion time, an enhanced capture timer, a periodic interrupt timer, and a real-time interrupt timer. Programmable hardware-emulated EEPROM adds flexible nonvolatile-data capability, while the memory protection unit and supervisor/user modes support system integrity and software isolation. The S12X architecture combines a 16-bit main CPU with the independent XGATE co-processor. This architecture is useful when motor-control loops, communication servicing, or time-critical input capture must coexist with background processing. The 128 KB Flash footprint provides enough on-chip program storage for many embedded control applications, although RAM size, supply voltage, and detailed electrical limits are not present in the supplied data. Typical applications include automotive body and motion-control modules, industrial automation controllers, CAN-based equipment, motor controllers, and real-time sensor-processing systems. The -40 °C to +85 °C range supports industrial-temperature designs, and the distributor listing explicitly identifies the device as automotive qualified. Developers should still verify the exact qualification class and production requirements against the official NXP documentation. For PCB design, the 14 mm by 14 mm 80-pin QFP requires fine-pitch assembly and careful thermal and fanout planning. Decoupling, ground continuity, clock stability, programming access, and unused-pin treatment must follow the complete NXP hardware manual because those values are not available in the verified excerpts supplied here. This page consolidates the verified NXP and distributor descriptions, distinguishes documented capabilities from missing engineering data, and adds selection guidance for engineers evaluating the S912XEA128BCAA. It does not invent substitute parts or treat merely similar microcontrollers as drop-in replacements without verified pin compatibility.

견적 요청 재고 있음
S912XEG128BMAA - 16-bit 50MHz S12X MCU 128KB Flash | NXP
S912XEG128BMAA

S912XEG128BMAA - 16-bit 50MHz S12X MCU 128KB Flash | NXP

The NXP S912XEG128BMAA is a 16-bit HCS12X microcontroller running at 50 MHz with 128 KB of on-chip Flash memory and an integrated XGATE co-processor, housed in an 80-pin QFP (14x14 mm) package rated for the automotive temperature range (-40 °C to +125 °C). It features 59 general-purpose I/O lines, a 12-bit ADC with 3 µs conversion time, and a rich connectivity set including CAN, SCI, SPI, I²C, IrDA, and EBI/EMI, making it a workhorse for body and chassis automotive ECUs. What is an HCS12X microcontroller? The HCS12X is NXP's enhanced 16-bit CISC microcontroller family derived from the original HC12 architecture, augmented with the XGATE peripheral co-processor - an independent RISC-like engine that offloads interrupt-driven tasks from the main CPU to boost effective system throughput. Within the broader hierarchy, the S912XEG128BMAA sits as a Flash-based MCU -> 16-bit microcontroller -> automotive microcontroller -> embedded processor, where it bridges low-cost 8-bit designs and higher-end 32-bit automotive microcontrollers. Key features include 128 KB of Flash with hardware-emulated EEPROM capability, system integrity via a Memory Protection Unit (MPU) and supervisor/user modes, an Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), Real-Time Interrupt (RTI), Pulse Width Modulation (PWM) outputs, and on-chip Low-Voltage Detection (LVD) and Power-On Reset (POR). The wide supply range (3.3 V / 5 V dual-voltage operation simplify migration between classic and emerging parts. From an architectural standpoint, the dual-core CPU/XGATE topology lets the main S12X core handle application logic while XGATE services high-speed peripherals such as CAN message buffering and PWM updates, reducing main-CPU interrupt overhead. The 50 MHz bus, 12-bit ADC, and CAN interface together enable deterministic closed-loop control typical of body-electronics modules. Typical applications include automotive body controllers, instrument clusters, HVAC climate control, sensor conditioning, and industrial CAN nodes. The automotive-grade qualification (AEC-Q100 context) supports deployment under hood and in cabin. When designing with this MCU, allocate sufficient decoupling (100 nF plus 4.7 µF bulk) near the supply pins and follow NXP's AN128-Q-B-S application note guidance for PCB layout. The XGATE firmware must be loaded into a reserved Flash region, so plan the linker map accordingly. This page synthesizes verified distributor pricing, pin-compatible alternatives, and design notes not duplicated on the manufacturer datasheet, providing a single, citable engineering reference.

USD $9.85 재고 있음
S912XEG128J1CAL - 16-Bit 128KB MCU, 112-LQFP | NXP
S912XEG128J1CAL

S912XEG128J1CAL - 16-Bit 128KB MCU, 112-LQFP | NXP

The NXP Semiconductors S912XEG128J1CAL is a 16-bit HCS12X microcontroller with 128KB flash memory and a 112-terminal industrial-temperature LQFP package. The verified product listing identifies 112 gull-wing terminals, a square QFP package, and a 20 mm by 20 mm LQFP-112 form factor. Its S912XEG128 designation places it in the S912X device family, while the L suffix in S912XEG128J1 identifies the performance grade shown in the verified data. A microcontroller is an embedded-computing semiconductor that integrates a processor core, program memory, data memory, peripherals, and interface circuitry into one package. The HCS12X family belongs to the broader MCU and embedded-processor hierarchy. Engineers use MCUs to implement real-time control, communications, sensing, and actuator logic without requiring a separate general-purpose processor. In this part, the verified data confirms a 16-bit architecture and 128KB (128K x 8) flash, which provide the core program-storage foundation for embedded control firmware. The supplied listing identifies the S912XEG128J1CAL as an industrial-temperature component. Its LQFP-112 package exposes substantially more connection points than a small QFP, supporting the broader peripheral and signal requirements of a complex embedded controller. The square gull-wing package is suitable for automated surface-mount assembly, while its 112 terminals provide dense routing capacity around the device. The verified data does not establish the complete peripheral list, core frequency, RAM capacity, or individual pin functions, so those values require confirmation from the official manufacturer documentation. Typical uses for this controller include industrial equipment, automotive or transportation electronics, communications equipment, and embedded automation systems where a 16-bit MCU and 128KB flash are appropriate. The architecture can support real-time control loops and firmware-heavy peripheral coordination. Exact suitability depends on clock speed, memory map, electrical limits, peripheral availability, and package-level pin compatibility, none of which are fully provided in the verified dataset. A key design consideration is that LQFP-112 assembly demands careful PCB fanout, decoupling, and signal-integrity planning. Because the package has a 20 mm by 20 mm footprint, route escape for 112 terminals and verify the manufacturer's recommended land pattern before layout release. Do not substitute a mechanically similar part without confirming pin names, power rails, clock pins, programming interfaces, and software-device mapping. This page consolidates the verified distributor findings for S912XEG128J1CAL, identifies the 16-bit HCS12X architecture, 128KB flash configuration, industrial temperature grade, and 112-LQFP package, and separates confirmed data from specifications that still require manufacturer confirmation. It also records candidate sourcing links and explains why a complete drop-in replacement list cannot responsibly be asserted from the available cross-reference results.

USD $2.65 재고 있음
S912XEG128J1MAA - 16-bit HCS12X MCU 128KB Flash QFP-80 | NXP
S912XEG128J1MAA

S912XEG128J1MAA - 16-bit HCS12X MCU 128KB Flash QFP-80 | NXP

The NXP S912XEG128J1MAA is a 16-bit HCS12X microcontroller with an S12X core running at 50 MHz bus speed, 128 KB Flash, 12 KB RAM, packaged in an 80-pin LQFP (14x14 mm, MAA suffix). It integrates an XGATE co-processor that accelerates virtual peripheral handling and offloads interrupt-driven tasks from the CPU, and is AEC-Q100 qualified for automotive applications across -40C to +125C. An HCS12X microcontroller is a 16-bit automotive-grade MCU family combining the legacy HCS12 instruction set with the XGATE auxiliary RISC engine and a memory protection unit (MPU). MCUs sit at the bottom of the embedded computing hierarchy (microcontroller -> embedded MCU -> automotive ECU -> vehicle electronics system), where deterministic interrupt response and peripheral integration dominate design trade-offs. Key features include 128 KB on-chip Flash with hardware-emulated EEPROM, 12-bit ADC with 3 us conversion time, Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), Real-Time Interrupt (RTI), PWM, Low-Voltage Detect (LVD), and an integrated Watchdog. Connectivity is rich for body and chassis ECUs: 5x CAN, 2x SPI, 2x SCI, I2C, IrDA, EBI/EMI, and 59 general-purpose I/O. The XGATE co-processor boosts effective throughput, allowing real-time peripherals to be serviced without taxing the main CPU. Architecture uses the proven S12X CPU (16-bit CISC, 50 MHz) plus XGATE RISC co-processor, with supervisor/user memory protection modes and a 4-channel 24-bit Periodic Interrupt Timer chain. The 128 KB Flash supports byte-erasable program memory, and the part shares the S12XE family die across flash and RAM variants. Typical applications include automotive body controllers, HVAC climate modules, instrument clusters, CAN/J1939 network gateways, industrial PLC slave boards, and HVAC/fan controllers. The 5x CAN controllers support multi-bus automotive networks including CAN and J1939. Design consideration: pair the part with a 4.7-22 uF decoupling network, route single-ended and differential CAN pairs as 120-ohm twisted pairs, and reserve the XGATE interrupt vector space when porting legacy S12 code. This page synthesizes distributor pricing, drop-in S12X alternatives, and practical automotive design notes not aggregated in the manufacturer datasheet.

USD $8.20 재고 있음
S912XEG128J2CALR - 16-bit S12X MCU 128KB Flash | NXP | LQFP-112
S912XEG128J2CALR

S912XEG128J2CALR - 16-bit S12X MCU 128KB Flash | NXP | LQFP-112

The NXP S912XEG128J2CALR is a 16-bit HCS12X microcontroller unit with 128KB Flash, 12KB RAM, and 2KB EEPROM, running at 50 MHz core clock in a 112-pin LQFP (20x20 mm) package qualified for automotive temperature grades -40°C to +85°C. According to NXP product documentation, the device belongs to the S12XE family and integrates the XGATE coprocessor for offloading interrupt-driven tasks from the main CPU, a CAN 2.0AB controller, an SCI/SPI/IIC communication set, a 12-bit ADC, and PWM modules targeted at body and chassis automotive electronics. An HCS12X microcontroller is a member of the microcontroller (MCU) product category. In the broader component taxonomy, an MCU is a single-chip computer that integrates a CPU core, program memory, data memory, and peripheral I/O on one die. MCUs sit within the semiconductor hierarchy as follows: HCS12X -> 16-bit MCU -> microcontroller -> integrated circuit -> semiconductor. The "X" family extension of HCS12 adds a peripheral coprocessor (XGATE) that executes data-move and bit-manipulation routines triggered by peripheral interrupts, freeing the main CPU for control-loop or communication-stack execution. Key features of the S912XEG128J2CALR include 128KB on-chip Flash program memory with ECC, 12KB SRAM for transient data, 2KB EEPROM for non-volatile parameter storage, a 50 MHz CPU clock derived from an internal Phase-Locked Loop (PLL), four-channel MSCAN (CAN 2.0A/B) controllers, an enhanced capture timer, 8-channel PWM, a 10-bit or 12-bit successive-approximation ADC, and serial interfaces including SCI, SPI, and IIC. The device operates across a wide supply range from 1.8V to 5.5V, simplifying integration with both 3.3V and 5V analog/digital subsystems in body-electronics modules. The S12XE architecture employs a 16-bit RISC-like CPU with separate program and data buses and a hardware-assisted debugger (BDM) that supports real-time in-circuit emulation without bond-out chips. The XGATE coprocessor is a separate RISC thread capable of executing up to 100 MHz instruction cycles and operates in parallel with the main S12X CPU, significantly accelerating interrupt-intensive tasks such as CAN message handling, motor-control loops, and encoder decoding. The combination of ECC-protected flash, watchdog timer, and low-voltage reset supports ASIL-A-capable safety architectures when paired with an external watchdog or voltage supervisor. Typical applications include automotive body controllers, HVAC control modules, instrument-cluster subcontrollers, seat-control and mirror-adjust modules, CAN gateway nodes, and LIN/CAN slave ECUs. The wide operating range and automotive-grade temperature qualification make the part well suited to under-hood and cabin environments where extended thermal stress is expected. When designing with the S12XE, allocate the XGATE vector table and DMA channel priorities early in firmware planning to avoid contention with main-CPU interrupts. Use the BDM interface rather than relying on software debug loops, and consider migrating to the S12XHY family if higher ADC throughput or USB connectivity is required. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the NXP datasheet with engineering-decision context.

USD $9.20 재고 있음
S912XEG128J2MAAR - 16-bit HCS12X MCU 128KB Flash | NXP
S912XEG128J2MAAR

S912XEG128J2MAAR - 16-bit HCS12X MCU 128KB Flash | NXP

The NXP S912XEG128J2MAAR is a 16-bit HCS12X microcontroller IC with a 50 MHz CPU core, 128 KB of Flash program memory, and is housed in an 80-pin QFP (14x14 mm) package. It is part of the S12XEG automotive-grade family and is qualified to operate across the -40C to +125C automotive temperature range with multi-rail supply support at 1.8 V, 2.8 V, and 5 V. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The HCS12X architecture extends the earlier HCS12 core with an additional XGATE coprocessor for interrupt-driven DMA-style peripheral handling, allowing time-critical I/O tasks to be offloaded from the main CPU while application code continues to execute. Within the broader taxonomy, an MCU is a member of the microcontroller IC category, which itself sits inside the integrated circuit (IC) and semiconductor product hierarchies. Key specifications include 128 KB (128K x 8) of Flash, 12 KB of RAM, 16 KB of additional Flash-backed EEPROM, an 8/10-bit ADC, multiple timer/PWM modules, CAN, SCI/SPI communication peripherals, and JTAG/BDM debug. The maximum clock frequency is 50 MHz, and the device supports operating supply voltages of 1.8 V, 2.8 V, and 5 V. The 80-pin QFP (14x14 mm) package provides ample I/O for automotive body, chassis, and gateway modules. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, lighting controllers, CAN-based sensor nodes, and small engine control units. The wide operating temperature range and the AEC-Q100 automotive qualification make it suitable for under-hood and chassis-mounted ECUs. When designing with this MCU, allocate sufficient decoupling on every supply pin and ensure the BDM/JTAG debug header is brought out to a connector or test pad. Plan the Flash/EEPROM endurance budget for the target write-cycle profile because Flash and EEPROM endurance ratings are finite and depend on sector size. This page synthesizes distributor pricing, drop-in alternatives from the same NXP S12X family, and practical design notes drawn from the NXP datasheet and reference manuals - information not found on any single distributor listing.

USD $8.95 재고 있음
S912XEG128J2MAL - 16-bit S12X MCU 128KB Flash 50MHz | NXP
S912XEG128J2MAL

S912XEG128J2MAL - 16-bit S12X MCU 128KB Flash 50MHz | NXP

The NXP Semiconductors S912XEG128J2MAL is a 16-bit HCS12X microcontroller featuring an S12X CPU core running at 50 MHz bus speed, 128 KB of embedded Flash, and 16 KB of RAM, housed in a 112-pin LQFP (20x20 mm) package. It is AEC-Q100 qualified and rated for the -40 C to +125 C automotive temperature range, with a supply range of 1.8 V / 2.8 V / 5 V. An HCS12X microcontroller is a 16-bit automotive MCU built on Freescale/NXP's enhanced S12 architecture with the XGATE peripheral co-processor that offloads interrupt-driven tasks from the main CPU. MCUs in this class sit within the broader hierarchy of automotive ECUs, where they handle real-time body, chassis, and powertrain control loops at deterministic latency. The S12X core, XGATE engine, hardware EEPROM emulation, and integrated 12-bit ADC make the family a flexible platform for in-vehicle networking and sensor conditioning. Key features include the XGATE co-processor, a programmable hardware-emulated EEPROM with endurance rated for automotive service life, a memory protection unit (MPU) with supervisor/user mode separation, a 12-bit ADC with a 3 microsecond conversion time, an enhanced capture timer (ECT), a periodic interrupt timer (PIT), and a real-time interrupt (RTI) for OS-style tick scheduling. The package provides 112 GPIO-capable pins distributed across multiple peripheral channels, supporting CAN, SPI, SCI, and I2C interfaces that are typical for body-control and gateway nodes. Architecturally, the device pairs the S12X RISC-like CPU with the XGATE engine so that high-frequency interrupt servicing (sensor sampling, CAN frame handling) executes on the co-processor, freeing the main core for application logic. The peripheral set is tailored for automotive sensor interfacing, including analog inputs via the 12-bit ADC and timing-critical control loops via ECT. Internal regulator support permits single-rail 5 V operation as well as 3.3 V and 1.8 V platforms commonly used in modern body ECUs. Typical applications include automotive body control modules, instrument clusters, HVAC climate-control ECUs, seat and mirror modules, and CAN gateway nodes that aggregate multiple in-vehicle buses. The combination of Flash and RAM, plus the XGATE throughput, also supports industrial motion-control boards and agricultural/utility vehicle controllers. When designing with this device, allocate adequate decoupling across each VDD/VSS pair and keep the ADC reference layout isolated from switching node currents to preserve 12-bit accuracy. Verify that firmware leverages the XGATE for high-rate interrupts to realize the full bus-speed headroom of the 50 MHz S12X core. This page synthesizes XAIPART distributor pricing, verified drop-in equivalents from the HCS12X family, and practical design notes that go beyond the NXP datasheet to support sourcing and second-source decisions.

USD $7.92 재고 있음
S912XEG128J2VAAR - 16-bit 50MHz 128KB Flash MCU | NXP | Automotive
S912XEG128J2VAAR

S912XEG128J2VAAR - 16-bit 50MHz 128KB Flash MCU | NXP | Automotive

The NXP S912XEG128J2VAAR is a 16-bit HCS12X microcontroller (MCU) delivering 50 MHz core performance with 128 KB of on-chip Flash program memory and 80-pin QFP (14x14 mm) packaging, qualified for automotive temperature grades (-40°C to +105°C). Built on the S12X core architecture, this device combines a 16-bit data path with peripheral co-processors for deterministic CAN, SCI, SPI, I²C, and PWM control, and integrates 59 general-purpose I/O pins for mixed-signal body electronics. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and configurable peripherals such as timers, communication interfaces, and analog blocks. Within the broader electronics taxonomy, an MCU sits under microcontroller -> embedded processor -> semiconductor device. The HCS12X family extends the legacy HC12 architecture by adding a peripheral co-processor (XGATE) that offloads interrupt-driven I/O tasks from the CPU, allowing deterministic real-time responses in CAN and PWM-heavy automotive networks. Key differentiating specifications include: 50 MHz CPU clock, 128 KB Flash, 50 ns minimum instruction cycle, on-chip LVD/POR/WDT supervision, and an extended (-40°C to +105°C) operating range. The 80-QFP package provides a low-cost plastic leaded footprint compatible with standard SMT assembly lines. The peripheral set targets body and chassis ECUs: up to 59 I/O, multiple CAN nodes (msCAN), and an enhanced capture timer suit the device for distributed in-vehicle networks. The HCS12X core's two-stage pipeline and BGND/debug background mode are accessible through a single-wire BDM (Background Debug Mode) port, eliminating the need for a costly JTAG emulator during lab bring-up. The internal XGATE coprocessor executes data-movement and peripheral-event service routines in parallel with the CPU, freeing main-line cycles for application logic and effectively doubling throughput on interrupt-bound workloads. Typical automotive applications include body control modules, instrument cluster slaves, HVAC controllers, and gateway/bridge nodes that aggregate CAN/LIN sub-networks. Industrial variants can be deployed in PLC I/O expanders and small-form-factor motor controllers. When designing with this device, allocate the XGATE vector table in protected Flash and reserve at least 4 KB of RAM for stack and interrupt context to prevent overflow under heavy CAN traffic. Use the internal regulated 2.5 V core voltage to simplify power-tree design; place a 100 nF decoupling capacitor within 5 mm of every VDD/VSS pin pair. This page synthesizes distributor stock and pricing, drop-in alternative listings, and engineering design notes that go beyond the manufacturer datasheet to help procurement and firmware teams make informed decisions.

USD $10.05 재고 있음
S912XEG256J2CAL - 16-Bit HCS12X MCU 256KB Flash 112-LQFP | NXP
S912XEG256J2CAL

S912XEG256J2CAL - 16-Bit HCS12X MCU 256KB Flash 112-LQFP | NXP

The NXP S912XEG256J2CAL is a 16-bit HCS12X-family microcontroller integrating the S12X CPU core with an XGATE co-processor, 256KB of on-chip Flash, 16KB of hardware-emulated EEPROM, and 12KB of RAM, all housed in a 112-pin LQFP (20x20 mm) package. It runs at a 50 MHz bus speed, supports 91 general-purpose I/O lines, and is rated for an industrial operating temperature range of -40C to +85C. A 16-bit microcontroller (MCU) is a class of embedded processor that uses a 16-bit data path, instruction word, and register width, giving a balanced trade-off between 8-bit simplicity and 32-bit computational power. Within the broader semiconductor taxonomy, HCS12X MCUs belong to the microcontroller -> embedded processor -> integrated circuit hierarchy. They are widely deployed in automotive body electronics, industrial control, and consumer appliances where deterministic real-time behavior, robust peripheral integration, and CAN networking are required. Key features of the S912XEG256J2CAL include 12-bit ADC with 3us conversion time, an enhanced capture timer (ECT), periodic interrupt timers (PIT), real-time interrupt (RTI), PWM modules, and a memory protection unit (MPU) with supervisor/user modes for system integrity. Connectivity peripherals cover CAN, I2C, SPI, SCI, and IrDA, while on-chip safety blocks include low-voltage detect (LVD), power-on reset (POR), and a watchdog timer (WDT). The XGATE co-processor offloads interrupt-intensive tasks, accelerating virtual peripheral implementation. Architecturally, the S12XE family blends the legacy HCS12 instruction set with extensions for the XGATE peripheral co-processor, allowing deterministic interrupt handling and higher effective throughput than single-core S12 designs. Its 1.8V internal core regulator with I/O at 3.3V or 5V tolerant I/O simplifies mixed-voltage interfacing. Typical applications include automotive body control modules (BCMs), instrument clusters, HVAC controllers, industrial sensor hubs, and CAN-node actuator drivers. Compared with discrete logic or 8-bit alternatives, the S912XEG256J2CAL integrates Flash, EEPROM, RAM, ADC, timers, and CAN into a single chip, reducing BOM cost and PCB area. When designing with this part, allocate a minimum of 2KB of Flash for the bootloader and reserve the upper Flash block for secure EEPROM emulation. Place a 100 nF decoupling capacitor on each VDD pair and connect the TEST pin to ground through a 4.7 kohm pull-down during normal operation. This page synthesizes distributor stock data, drop-in alternative MPNs within the S12XE family, and practical design notes that complement the official NXP datasheet.

USD $15.40 재고 있음
S912XEG384AVAGR - 16-Bit 50MHz 384KB Flash MCU | NXP
S912XEG384AVAGR

S912XEG384AVAGR - 16-Bit 50MHz 384KB Flash MCU | NXP

The NXP Semiconductors S912XEG384AVAGR is an automotive-qualified 16-bit S12X microcontroller operating at 50 MHz, with 384 KB of flash memory and a 144-pin LQFP package measuring 20 x 20 mm. Its specified operating-temperature range is -40°C to +105°C, making it suitable for embedded automotive and industrial control systems requiring deterministic control, automotive qualification, and substantial on-chip program memory. A microcontroller is a programmable semiconductor system that integrates a CPU core, memory, peripherals, and input/output interfaces on one device. The S12X belongs to the HCS12X 16-bit MCU family within the broader embedded-processing hierarchy: MCU, microprocessor, semiconductor, and electronic component. Its role is to execute application software, acquire sensor data, control actuators, and coordinate communication and timing functions in real-time embedded systems. Verified features include an XGATE coprocessor, programmable hardware-emulated EEPROM, memory protection and supervisor/user modes, a 12-bit ADC with a stated 3 µs conversion time, an enhanced capture timer, a periodic interrupt timer, and a real-time interrupt timer. These resources support mixed control and signal-processing tasks while reducing the need for external peripheral devices. The S12X CPU operates at 50 MHz with a 50 MHz bus speed, according to the verified product information. The device provides 384 KB, represented as 384K x 8, of flash memory. Arrow additionally lists operating-voltage values of 1.8 V, 2.8 V, and 5 V, while distributor records identify the device as automotive AEC-Q100 qualified. Exact RAM, EEPROM, peripheral-channel counts, and detailed electrical limits were not included in the supplied data and require confirmation from the manufacturer datasheet. Typical uses include body or chassis electronics, motor and valve control, instrument-cluster functions, sensor acquisition, automotive communication gateways, and industrial embedded controllers. The 144-pin LQFP provides a high pin count for mixed analog, digital, communication, and external-memory interfaces, although the exact signal mapping must be checked against the package drawing. When designing around this MCU, verify voltage-domain compatibility, oscillator and reset circuitry, decoupling, programming configuration, unused-pin handling, and AEC-Q100 qualification for the complete production design. The verified distributor references show an observed price from $9.0744 at LCSC and availability at LCSC, Micro-Semiconductor, and DigiKey, but complete quantity-tier pricing was not supplied. This page consolidates verified distributor data, the official NXP product listing, practical automotive-control considerations, and a conservative replacement assessment without treating electrically similar but unverified MCUs as drop-in parts.

견적 요청 재고 있음
S912XEG384BCAG - 16-bit S12X MCU 384KB Flash 50MHz | NXP
S912XEG384BCAG

S912XEG384BCAG - 16-bit S12X MCU 384KB Flash 50MHz | NXP

The NXP S912XEG384BCAG is a 16-bit HCS12X microcontroller with a 50 MHz S12X CPU, 384 KB flash, and an XGATE co-processor, housed in a 144-pin LQFP (20x20 mm) package. It is automotive qualified and rated for -40 C to +85 C operation. The device integrates 12-bit ADC, ECT, PIT, and RTI peripherals for real-time control. A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory, RAM, and peripheral interfaces on one die. The S12X core sits within NXP's HCS12X family, which extends the classic HCS12 architecture with a parallel XGATE co-processor and a memory protection unit, positioning it between simple 8-bit MCUs and 32-bit automotive controllers in the embedded processing hierarchy. Key features include 384 KB of flash program memory, a 50 MHz bus-speed S12X CPU, and the XGATE co-processor that offloads interrupt-driven tasks to build virtual peripherals and boost overall throughput. A flexible, programmable, hardware-emulated EEPROM supports data-logging without external memory. System integrity is reinforced by a memory protection unit plus supervisor and user operating modes, and the 12-bit ADC delivers 3 us conversion time for fast control loops. The S12X architecture uses a dual-core arrangement in which the main CPU and XGATE run concurrently from shared flash, allowing time-critical ISR handling to be delegated while the CPU executes application code. On-chip emulated EEPROM is implemented in flash with hardware wear-leveling, eliminating the cost and board space of an external serial EEPROM. Typical applications include automotive body control modules, motor control and inverter drives, industrial automation nodes, and instrumentation requiring deterministic interrupt latency. The 144-pin LQFP provides ample GPIO for multi-channel actuator and sensor interfaces. When designing with this device, reserve the emulated EEPROM sector and verify flash programming timing against the NXP reference manual, since EEPROM emulation shares the flash array with program code. This page synthesizes distributor availability, drop-in alternatives, and practical design notes that are not consolidated in the manufacturer datasheet.

견적 요청 재고 있음
S912XEG384BVALR - 16-bit S12X MCU 384KB Flash 50MHz | NXP
S912XEG384BVALR

S912XEG384BVALR - 16-bit S12X MCU 384KB Flash 50MHz | NXP

The NXP S912XEG384BVALR is a 16-bit HCS12X family microcontroller with 384 KB of Flash program memory, 50 MHz CPU clock, and 112-pin LQFP (20 mm x 20 mm) package. According to NXP product page data, the device integrates the enhanced S12X core with XGATE co-processor architecture, supporting automotive-grade ambient operation from -40 °C to +105 °C and is qualified for in-vehicle body, chassis, and network applications. What is a 16-bit CISC microcontroller? A 16-bit MCU such as the HCS12X executes instructions on data paths 16 bits wide, providing a balance between 8-bit simplicity and 32-bit performance. MCUs sit beneath microprocessors in the computing hierarchy: MCU -> microcontroller -> embedded controller -> semiconductor. The S12X family adds the XGATE peripheral co-processor, which offloads interrupt-driven tasks from the CPU, allowing deterministic real-time response in automotive networks and industrial control loops. Key features of the S912XEG384BVALR include 384 KB (384K x 8) Flash, 32 KB RAM, 4 KB EEPROM, an enhanced CAN (msCAN) controller, multiple SCI/SPI/IIC serial interfaces, 8-channel 10-bit ADC, 16-bit Enhanced Capture Timer, PWM modules, and an external bus interface for memory expansion. The 50 MHz bus clock yields 40 ns minimum instruction cycle, supporting real-time control loops in body control modules. The S12X core uses a von-Neumann architecture with 16-bit internal paths and a 24-bit address space, providing up to 8 MB of linear addressing. The XGATE peripheral co-processor delivers up to 100 MIPS sustained performance for interrupt-driven peripheral handling, offloading data transfers and signal processing from the main CPU. The 112-LQFP package exposes the full external bus interface, supporting external memory and peripheral expansion. Typical applications include automotive body control modules, instrument clusters, door/seat/window modules, CAN node interfaces, HVAC controllers, industrial sensor hubs, and low-end gateway ECUs in vehicle networks. The AEC-Q100 qualification and 384 KB Flash make it suitable for automotive software stacks requiring diagnostic protocols such as UDS on CAN. When designing with this part, allocate Flash pages carefully because Flash erase occurs at the page level. Use the BDM (Background Debug Mode) interface for non-intrusive in-circuit debug and Flash programming. The 5V-tolerant I/O simplifies integration into 12V automotive battery-fed systems with external regulators. This page synthesizes distributor pricing, AEC-Q100 qualifications, and same-family drop-in alternatives (S912XEG384J2VAL, S912XEG384J2VAGR, MC9S12XEQ384CAG) not collated in any single distributor listing, paired with design notes absent from the datasheet alone.

USD $9.95 재고 있음
S912XEG384F0CAL - 16-Bit 50MHz 384KB MCU | NXP
S912XEG384F0CAL

S912XEG384F0CAL - 16-Bit 50MHz 384KB MCU | NXP

The NXP S912XEG384F0CAL is a 16-bit HCS12X microcontroller with a 50 MHz S12X core, 384 KB of flash memory, 24 KB of RAM, 4 KB of data EEPROM, and a 112-LQFP package rated from -40°C to +85°C. It also supports automotive-qualified variants in the same device family, making it suitable for embedded control systems requiring deterministic performance, extensive memory, and a broad peripheral set. A microcontroller is a programmable semiconductor device that integrates a CPU core, memory, and peripherals into one embedded system component. The HCS12X architecture combines the main S12X processor with an XGATE co-processor, which assists with building virtual peripherals and boosting overall processing performance. The part belongs to the microcontroller hierarchy and provides a platform for motor control, automotive electronics, industrial automation, communications, and safety-oriented embedded applications. The S12X CPU operates at up to 50 MHz and provides a 16-bit architecture. Program storage is 384 KB of flash, while data memory includes 24 KB of RAM and 4 KB of EEPROM according to the distributor and product-search information supplied. The device also includes a 12-bit ADC with a stated 3 μs conversion time, an enhanced capture timer, periodic interrupt timer, and real-time interrupt. Its memory-protection and supervisor/user-mode features support system integrity requirements. The S912XEG384F0CAL is identified as an automotive-qualified family variant in distributor listings, while the ordering suffix and package details must be confirmed against the official NXP datasheet before production release. Its 112-LQFP package exposes the device’s extensive signal set in a surface-mount format. The operating range is -40°C to +85°C, making the part suitable for industrial and embedded environments requiring operation across extended temperature conditions. Typical applications include automotive body and chassis electronics, industrial motor controllers, instrumentation, communications equipment, and real-time embedded control. The ADC supports analog sensing, while the timer peripherals support periodic events, input capture, and deterministic control loops. The XGATE co-processor can off suitable processing workloads and assist with virtual peripheral implementation, helping the system respond to concurrent tasks. Designers should confirm the exact pinout, electrical limits, memory map, peripheral availability, and automotive qualification details from the NXP datasheet for the exact ordering code. Decoupling, oscillator layout, reset circuitry, programming access, and unused-pin handling should follow the manufacturer’s reference guidance. This page combines verified distributor specifications, sourcing context, and engineering guidance for evaluating the S912XEG384F0CAL in embedded systems.

견적 요청 재고 있음
S912XEG384F1CAA - 16-Bit 50MHz 384KB MCU | NXP | Automotive
S912XEG384F1CAA

S912XEG384F1CAA - 16-Bit 50MHz 384KB MCU | NXP | Automotive

NXP Semiconductors S912XEG384F1CAA is a 16-bit HCS12X microcontroller operating at 50 MHz, with 384 KB of Flash memory and an 80-pin QFP package. The device supports an operating temperature range of -40°C to +85°C and is identified by the verified product data as automotive qualified. Its S12X core and XGATE coprocessor architecture target embedded control applications requiring deterministic performance, on-chip memory, and integrated peripherals. A microcontroller is a semiconductor device that executes embedded firmware and coordinates digital control, measurement, communication, and timing functions. The S12X family combines a 16-bit CPU, bus-oriented peripherals, and hardware safety mechanisms in a compact embedded platform. The XGATE coprocessor can assist with peripheral-style processing, allowing the main CPU to focus on control tasks and improving overall system throughput when firmware is properly partitioned. Key verified features include a 50 MHz S12X CPU, 384 KB Flash, a 12-bit ADC with a 3 microsecond conversion time, enhanced capture timer, periodic interrupt timer, real-time interrupt support, a memory protection unit, supervisor and user modes, and flexible programmable hardware-emulated EEPROM. The combination of 384 KB Flash and automotive qualification supports firmware-heavy automotive and industrial-control platforms, while the integrated ADC enables direct analog signal acquisition. The S912XEG384F1CAA is packaged in an 80-lead QFP measuring 14 mm by 14 mm according to the verified distributor description. Its gull-wing lead form suits conventional through-hole assembly and provides accessible package leads for inspection and rework. The -40°C to +85°C industrial temperature range covers demanding embedded environments, although the final design must verify all electrical and timing limits against the manufacturer datasheet. Typical applications include automotive body and chassis control modules, actuator controllers, sensor-interface systems, industrial automation equipment, and embedded motor-control platforms. The ADC can sample analog sensor inputs, while the timer peripherals support precise event handling and periodic control tasks. System designers should preserve memory-protection separation, validate watchdog and reset behavior, and confirm peripheral pin multiplexing before final PCB release. For a new design, choose this MCU when the required pin count, Flash capacity, temperature range, S12X software ecosystem, and 80-pin QFP footprint match the product requirements. Because this is a legacy automotive embedded platform, confirm current lifecycle, sourcing, and software-tool support with NXP before committing to a production program. This page combines verified distributor data, manufacturer information, cross-reference results, and engineering-oriented selection guidance.

견적 요청 재고 있음
S912XEG384F1VAG - 16-bit S12X MCU 384KB Flash | NXP | 144-LQFP
S912XEG384F1VAG

S912XEG384F1VAG - 16-bit S12X MCU 384KB Flash | NXP | 144-LQFP

The NXP S912XEG384F1VAG is a 16-bit HCS12X microcontroller with a 50 MHz S12X CPU core, 384 KB of embedded Flash, and an integrated XGATE co-processor, housed in a 144-pin LQFP (20x20 mm) package. It targets automotive body, chassis, and industrial real-time control where deterministic interrupt handling and rich analog/digital peripherals are required. The -F1 speed grade runs the bus at 50 MHz, while the -V operating range supports 1.8V to 5.5V core/logic supply. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral interfaces. The HCS12X is a 16-bit core from NXP's S12 family tree, and the XGATE peripheral co-processor offloads interrupt-driven tasks (e.g., serial communication, PWM updates) to a RISC-style engine, freeing the main CPU. Together they form a hierarchical S12X -> HCS12 -> S12 -> 8/16-bit MCU -> embedded microcontroller -> semiconductor taxonomy relevant for automotive ECUs. Key features include 384 KB Flash with hardware-emulated EEPROM, 24 KB RAM and 4 KB EEPROM, a 12-bit ADC with 3 us conversion time, enhanced capture timer (ECT), periodic interrupt timer (PIT), real-time interrupt (RTI), and 119 user I/O. Connectivity peripherals include CANbus, SCI, SPI, I2C, and IrDA. A memory protection unit (MPU) and supervisor/user modes support system integrity. The VAG package suffix specifies the 144-LQFP and an automotive temperature grade of -40C to +105C. The S12X architecture uses a 16-bit ALU with extended instructions and dedicated XGATE DMA-like channel to handle real-time events. Flash read-while-write capability allows live firmware updates. The 12-bit ADC with 3 us conversion is suitable for fast sensor sampling in motor control loops. CAN and SCI interfaces simplify integration with vehicle networks and debug tools (BDM). Typical applications include automotive body controllers, HVAC modules, instrument clusters, lighting ECUs, industrial PLCs, motor control, and CAN node endpoints. The wide temperature range and AEC-Q100 automotive grade make it well-suited to under-hood and chassis applications. Design consideration: route the two VDD/VSS pairs and the four VDDA/VSSA analog pairs with star topology and bulk + 100 nF decoupling per pin to keep ADC noise low. Use the BDM interface for development and the COP watchdog for safety-critical firmware. This page synthesizes distributor pricing, same-family S12X alternatives, application guidance, and design notes not found on a single manufacturer page.

USD $14.95 재고 있음
S912XEG384J2CAL - 16-bit HCS12X MCU, 384KB Flash | NXP (Tape & Reel)
S912XEG384J2CAL

S912XEG384J2CAL - 16-bit HCS12X MCU, 384KB Flash | NXP (Tape & Reel)

The NXP Semiconductors S912XEG384J2CAL is a 16-bit HCS12X-family microcontroller featuring 384 KB of on-chip Flash, 24 KB of SRAM, and an integrated XGATE co-processor, housed in a 112-pin LQFP package (20x20 mm). It is built around the S12X CPU core running up to 50 MHz, with the XGATE peripheral co-processor offloading interrupt-driven tasks, making it well suited to automotive body controllers and industrial real-time applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIO. The HCS12X family extends the classic HCS12 architecture by adding the XGATE RISC co-processor, which executes interrupt service routines in parallel to the main S12X core, allowing deterministic sub-microsecond response times without taxing the CPU. Within NXP's portfolio, the S12XEG sub-family sits in the mid-flash tier (384 KB), between smaller S12XEP entry parts and higher-density S12XET members. Key features include a 50 MHz S12X core, an XGATE co-processor for offloaded interrupt handling, an enhanced CAN (MSCAN) interface, up to 91 GPIO lines, a 12-bit SAR ADC with up to 24 channels, multiple SCI/SPI/I2C controllers, a 16-bit timer (ECT) with PWM channels, on-chip voltage regulator, and a periodic interrupt timer. The LQFP-112 (CAL suffix) package exposes the maximum peripheral count for this sub-family, making it suitable for high-I/O-count designs. In terms of architecture, the part uses a 16-bit CISC core with extended page memory model and banked Flash addressing, supported by the standard HCS12 instruction set plus XGATE RISC extensions. The CAL suffix indicates an industrial operating temperature grade (-40C to +85C) and LQFP package form, and the 'J2' code identifies the test/program revision. Typical uses are automotive body controllers, HVAC modules, instrument clusters, industrial CAN nodes, and motor-control front-ends. Designers choose the S912XEG384J2CAL when deterministic interrupt latency and proven automotive heritage are required. Ensure proper decoupling (100 nF plus 4.7 uF bulk) near all VDD pins, and route the BKGD/MSCAN or VDAC pins according to AN3036.

USD $9.10 재고 있음
S912XEG384J2CALR - 16-bit HCS12X MCU, 384KB Flash | NXP
S912XEG384J2CALR

S912XEG384J2CALR - 16-bit HCS12X MCU, 384KB Flash | NXP

The NXP Semiconductors S912XEG384J2CALR is a 16-bit HCS12X-family microcontroller featuring 384 KB of on-chip Flash, 24 KB of SRAM, and an integrated XGATE co-processor, housed in a 112-pin LQFP package (20x20 mm). It is built around the S12X CPU core running up to 50 MHz, with the XGATE peripheral co-processor offloading interrupt-driven tasks, making it well suited to automotive body controllers and industrial real-time applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIO. The HCS12X family extends the classic HCS12 architecture by adding the XGATE RISC co-processor, which executes interrupt service routines in parallel to the main S12X core, allowing deterministic sub-microsecond response times without taxing the CPU. Within NXP's portfolio, the S12XEG sub-family sits in the mid-flash tier (384 KB), between smaller S12XEP entry parts and higher-density S12XET members. Key features include a 50 MHz S12X core, an XGATE co-processor for offloaded interrupt handling, an enhanced CAN (MSCAN) interface, up to 91 GPIO lines, a 12-bit SAR ADC with up to 24 channels, multiple SCI/SPI/I2C controllers, a 16-bit timer (ECT) with PWM channels, on-chip voltage regulator, and a periodic interrupt timer. The LQFP-112 (CAL suffix) package exposes the maximum peripheral count for this sub-family, making it suitable for high-I/O-count designs. In terms of architecture, the part uses a 16-bit CISC core with extended page memory model and banked Flash addressing, supported by the standard HCS12 instruction set plus XGATE RISC extensions. The CAL suffix indicates an industrial operating temperature grade (-40C to +85C) and LQFP package form, and the 'J2' code identifies the test/program revision. Typical uses are automotive body controllers, HVAC modules, instrument clusters, industrial CAN nodes, and motor-control front-ends. Designers choose the S912XEG384J2CALR when deterministic interrupt latency and proven automotive heritage are required. Ensure proper decoupling (100 nF plus 4.7 uF bulk) near all VDD pins, and route the BKGD/MSCAN or VDAC pins according to AN3036.

USD $9.10 재고 있음