S912XEA128BCAA - 16-Bit 50MHz 128KB MCU | NXP
부품 번호: S912XEA128BCAA ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
S912XEA128BCAA 개요
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The HCS12X family sits within the embedded-control hierarchy: microcontroller, embedded processor, semiconductor, and electronic component. The S12X core is suited to real-time motor, communications, and industrial-control tasks, while the XGATE co-processor can execute independent peripheral or data-handling tasks and improve overall throughput.
Key verified features include a 50 MHz S12X CPU, a 128 K × 8 Flash configuration, and an XGATE co-processor. The listed integrated peripherals include a 12-bit ADC with a 3 µs conversion time, an enhanced capture timer, a periodic interrupt timer, and a real-time interrupt timer. Programmable hardware-emulated EEPROM adds flexible nonvolatile-data capability, while the memory protection unit and supervisor/user modes support system integrity and software isolation.
The S12X architecture combines a 16-bit main CPU with the independent XGATE co-processor. This architecture is useful when motor-control loops, communication servicing, or time-critical input capture must coexist with background processing. The 128 KB Flash footprint provides enough on-chip program storage for many embedded control applications, although RAM size, supply voltage, and detailed electrical limits are not present in the supplied data.
Typical applications include automotive body and motion-control modules, industrial automation controllers, CAN-based equipment, motor controllers, and real-time sensor-processing systems. The -40 °C to +85 °C range supports industrial-temperature designs, and the distributor listing explicitly identifies the device as automotive qualified. Developers should still verify the exact qualification class and production requirements against the official NXP documentation.
For PCB design, the 14 mm by 14 mm 80-pin QFP requires fine-pitch assembly and careful thermal and fanout planning. Decoupling, ground continuity, clock stability, programming access, and unused-pin treatment must follow the complete NXP hardware manual because those values are not available in the verified excerpts supplied here.
This page consolidates the verified NXP and distributor descriptions, distinguishes documented capabilities from missing engineering data, and adds selection guidance for engineers evaluating the S912XEA128BCAA. It does not invent substitute parts or treat merely similar microcontrollers as drop-in replacements without verified pin compatibility.
드롭인 대체품: S912XEA128BCAA — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청S912XEA128BCAA 최대 정격 & 전기적 특성
| Product Type | 16-bit HCS12X microcontroller |
| CPU Core | S12X |
| CPU and Bus Speed | 50 MHz |
| Main CPU Word Size | 16 bit |
| Co-Processor | XGATE |
| Flash Memory | 128 KB (128 K × 8) |
| ADC Resolution | 12 bit |
| ADC Conversion Time | 3 µs |
| Programmable Emulated EEPROM | Supported |
| Memory Protection Unit | Supported |
| CPU Privileges | Supervisor and user modes |
| Timer | Enhanced capture timer |
| Periodic Timer | Periodic interrupt timer |
| Real-Time Timer | Real-time interrupt timer |
| 동작 온도 범위 | -40 °C to +85 °C |
| Automotive Qualification | Automotive qualified |
| 패키지 | 80-pin QFP, 14 mm × 14 mm |
| 실장 유형 | Gull-wing surface mount |
S912XEA128BCAA 80-pin qfp, 14 mm × 14 mm 핀 구성 가이드
S912XEA128BCAA(80-pin qfp, 14 mm × 14 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: S912XEA128BCAA.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
S912XEA128BCAA 적합 용도: 6 애플리케이션s: Automotive Body Control, Industrial Motor Control, CAN-Based Equipment, Real-Time Sensor Acquisition, Timing and Capture Systems, Programmable Automation Controller.
Automotive Body Control
The S912XEA128BCAA fits automotive body-control work because the verified listing identifies an automotive-qualified 16-bit S12X MCU operating from -40 °C to +85 °C. Its 50 MHz main CPU and XGATE co-processor can support concurrent control logic and time-sensitive peripheral handling, while the integrated 12-bit ADC can acquire analog sensor inputs. A production design must still verify the exact AEC-Q100 grade, supply limits, transient requirements, qualification report, and 80-pin pinout before release.
추천
Industrial Motor Control
The S912XEA128BCAA is suitable for an industrial motor-control controller when deterministic embedded processing is required alongside mixed analog and timer functions. The 50 MHz S12X CPU can execute control software, the XGATE co-processor can offload eligible peripheral tasks, and the enhanced capture timer supports input-frequency or edge-oriented measurements. Designers should allocate pins for power-stage feedback, preserve analog isolation for the 12-bit ADC, and verify current-loop timing and PWM resources in the full NXP documentation.
추천
CAN-Based Equipment
The S912XEA128BCAA can serve as the central controller in communication-aware industrial equipment when an S12X software ecosystem is preferred. Its 50 MHz main CPU supports protocol and application processing, while the XGATE co-processor offers a path to isolate suitable communication or peripheral work. The enhanced capture and periodic interrupt timers help schedule service routines and timing events. Before selecting it, engineers must verify CAN availability, pin multiplexing, bus timing, transceiver interface voltage, and package routing because those details are absent from the supplied excerpts.
추천
Real-Time Sensor Acquisition
The S912XEA128BCAA fits real-time sensor-acquisition modules because its verified 12-bit ADC has a stated 3 µs conversion time, enabling rapid successive sampling when source impedance, sampling network, and acquisition timing are properly designed. The 128 KB Flash provides on-chip program storage, while the XGATE co-processor can handle eligible concurrent work. The ADC conversion time alone does not define complete sample throughput; software sequencing, trigger sources, averaging, bus access, calibration, and analog conditioning must also be verified.
추천
Timing and Capture Systems
The S912XEA128BCAA is appropriate for timing-sensitive modules using the verified enhanced capture timer, periodic interrupt timer, and real-time interrupt timer. These resources can organize periodic maintenance, input capture, and deterministic interrupt handling without relying solely on software polling. The 50 MHz S12X execution rate provides additional scheduling margin, and XGATE may offload suitable tasks. Exact timer widths, prescaler ranges, interrupt priorities, and pin-mux options are not included, so they must be confirmed in the NXP reference documentation.
추천
Programmable Automation Controller
The S912XEA128BCAA can anchor a programmable automation controller combining embedded logic, event timing, analog measurement, and system-integrity features. Its memory protection unit plus supervisor/user modes can help separate protected code from application code, while hardware-emulated EEPROM provides configurable nonvolatile storage. This combination is useful in industrial controllers requiring adaptable state retention. The implementation must define memory protection boundaries, EEPROM endurance requirements, watchdog behavior, startup timing, and fault recovery using verified documentation.
추천
추천 제품 요약
엔지니어링 참조 데이터: S912XEA128BCAA — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Brand | NXP Semiconductors |
| Package | 80-pin QFP, 14 mm × 14 mm |
| CPU Architecture | 16-bit S12X with XGATE co-processor |
| Maximum CPU Speed | 50 MHz |
| Flash Memory | 128 KB (128 K × 8) |
| ADC | 12-bit resolution, 3 µs conversion time |
| Operating Temperature | -40 °C to +85 °C |
| Qualification | Automotive qualified |
| Lifecycle Status | Active |
주요 차별점
- Independent co-processing architecture (vs Generic 16-bit MC9S12 devices)
- Substantive on-chip program storage (vs S9S12H128J2VFVE)
- Documented fast ADC conversion figure (vs MC9S12DJ128CPVE)
- Explicitly documented environmental and qualification positioning (vs S912XDT256F1VAA)
설계 노트
The verified 80-pin, 14 mm × 14 mm gull-wing QFP requires a deliberate escape strategy. Review pad geometry, fanout, solder mask, assembly process, and courtyard clearance against the current NXP package drawing before schematic release. Route high-speed clocks as short, continuous nets over a stable reference plane, and place required bypass capacitors at their assigned pins. The available qfp-80 visualization reflects package count only; engineers must use the official pin table before assigning power, ground, analog, programming, and port functions.
Treat the 50 MHz S12X clock and reset paths as sensitive nets. Follow the NXP reference schematic for clock source, oscillator, startup, and debug connectivity, then keep the oscillator loop compact and away from high-current switching nodes. Provide test access without disrupting production routing. For analog measurements using the 12-bit ADC, preserve a quiet return path and separate digital switching currents from sensor inputs. The supplied 3 µs conversion time does not eliminate sampling settling or analog-front-end design requirements.
Do not select a supply or estimate regulator dissipation until the current NXP documentation supplies operating-voltage and current limits. Build worst-case budgets from CPU utilization, XGATE activity, flash execution, timers, ADC sampling, and external I/O loading. Include startup inrush, regulator tolerance, transient response, and decoupling. Because no supply current, voltage range, or package thermal data was supplied, any numeric power figure would be an unsupported estimate and is intentionally omitted.
Do not treat the S912X name, 50 MHz rate, or shared 128 KB memory class as proof of drop-in compatibility. A replacement must match every QFP terminal, supply domain, signal-level tolerance, peripheral mapping, clock requirement, startup sequence, and software interrupt layout. Use the memory protection unit and supervisor/user modes deliberately, and test failure recovery as part of functional safety planning. Likewise, obtain the exact AEC-Q100 grade rather than relying solely on the distributor phrase automotive qualified.
규정 준수 정보
Verified NXP and Mouser results describe the device as automotive qualified, but the specific AEC-Q100 grade and supporting qualification report were not supplied. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations remain unknown rather than assumed.
