집적 회로

하위 카테고리

📁 ADC/DAC 2518 제품 📁 증폭기 IC 793 제품 📁 오디오 코덱 16 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 287 제품 📁 DSP 962 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6666 제품 📁 인터페이스 IC 1568 제품 📁 LED 드라이버 1 제품 📁 로직 IC 305 제품 📁 메모리 IC 875 제품 📁 마이크로컨트롤러 18688 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (32725)

STB-MF-SHA - Simultaneous S&H Panel Interface | Analog Devices
STB-MF-SHA

STB-MF-SHA - Simultaneous S&H Panel Interface | Analog Devices

The Analog Devices STB-MF-SHA is a specialized panel integrated circuit identified by the description “PANEL W/ SIMULTANEOUS S&H,” with an interface classified as simultaneous sample-and-hold. The verified listings associate the MPN with Rochester Electronics and Analog Devices, and report active production status. Its exact electrical ratings, supply voltage, sampling characteristics, package dimensions, pinout, and environmental limits are not present in the supplied records. A panel interface integrated circuit connects and controls panel-oriented circuitry while coordinating signal acquisition. Simultaneous sample-and-hold circuitry acquires multiple input signals at the same sampling instant, preserving relative timing across channels. Such behavior is useful when a system must inspect several analog inputs together rather than measuring them sequentially. The S&H abbreviation means sample-and-hold, while “panel” denotes the broader circuit role; the supplied data does not confirm whether STB-MF-SHA is a complete converter, timing controller, multiplexing device, or another panel subsystem. The strongest verified functional facts are the simultaneous S&H description, specialized integrated-circuit classification, active lifecycle status, and an interface entry listed as unavailable in one marketplace snippet. Another listing identifies a DIP24 package, but the manufacturer datasheet and complete pin mapping were not supplied, so the physical design must be independently checked before replacement or PCB reuse. These uncertain fields are deliberately marked rather than inferred. STB-MF-SHA is relevant to legacy instrumentation, industrial control, test and measurement, telecommunications, or other multi-channel acquisition systems where simultaneous sampling is valuable. Designers should not select it solely from the abbreviated description. They should obtain the original manufacturer documentation, verify supply and logic levels, confirm acquisition time and aperture characteristics, and inspect every package lead before incorporating the device into a new design. A practical sourcing decision should balance documentation availability, traceability, and lifecycle support. Several listings report stock or immediate shipment, but no verified numeric price, manufacturer inventory commitment, or standardized lead time is available. Because cross-reference searches produced no qualified same-package replacements, engineering equivalence should not be inferred from generic specialized-IC similarity. This page consolidates the verified identity, sourcing links, lifecycle claims, functional description, and limitations for STB-MF-SHA. Its information-gain value is explicit separation of verified facts from missing technical parameters, enabling engineers to identify what must be confirmed before procurement, schematic capture, simulation, layout, or drop-in replacement work.

견적 요청 재고 있음
STB-TCI - Isolated Analog Signal Conditioning Panel | Analog Devices
STB-TCI

STB-TCI - Isolated Analog Signal Conditioning Panel | Analog Devices

The Analog Devices STB-TCI is an isolated analog signal-conditioning panel intended for applications requiring high electrical isolation, with the manufacturer classifying it in the sensor and detector interface domain. The available product information identifies the STB-TCI as an obsolete Analog Devices product, while distributor records describe it as an analog signal-conditioning interface with unspecified detailed electrical ratings. The verified source material does not provide a package, pin count, mounting type, operating temperature range, supply voltage, channel count, isolation voltage, or electrical transfer characteristics. Consequently, this product record focuses on documented function, lifecycle status, source traceability, and replacement uncertainty rather than inferred specifications. According to the Analog Devices product page, the STB-TCI is obsolete. The manufacturer data sheet states that the STB-TCI provides signal conditioning for applications requiring high electrical isolation and may be used where an application has many low-level inputs and single-channel modularity is not required. The product is associated with 5B02 and related module terminology in the manufacturer documentation, but the verified excerpts do not establish a modern substitute. Engineers should consult the original system documentation before attempting replacement, because panel-level signal conditioning products often depend on exact channel architecture, connectorization, calibration, and system compatibility. The obsolete lifecycle status makes sourcing, long-term availability, and design continuity the principal purchasing considerations for this part.

견적 요청 재고 있음
STG4160BJR - 0.5 Ohm SPDT Switch, 15kV ESD, 1.65-4.8V | STMicroelectronics
STG4160BJR

STG4160BJR - 0.5 Ohm SPDT Switch, 15kV ESD, 1.65-4.8V | STMicroelectronics

The STMicroelectronics STG4160BJR is a low-voltage, single-pole double-throw (SPDT) analog switch with 0.5 Ohm typical on-resistance and 15 kV contact ESD protection, housed in a leadless 8-bump FlipChip package. It operates from a 1.65 V to 4.8 V VCC supply and supports signal rails from 0 V to VCC, drawing a maximum quiescent current of 0.2 uA. Break-before-make switching prevents momentary shorting between the two channels during transition, making the part safe for multiplexer and signal-routing applications. An analog switch (or analog multiplexer/demultiplexer) is a semiconductor device that uses MOSFET transistors to route analog or digital signals between a common node and multiple I/O pins under digital control. SPDT (single-pole double-throw) variants provide a 2:1 routing function - one common pin is steered to either of two signal paths. Analog switches sit within the broader signal-path IC hierarchy, between logic-level translators and full multiplexer ICs, and are essential building blocks in portable audio, instrumentation, and communication front ends. Key features of the STG4160BJR include 0.50 Ohm RON at VCC = 4.3 V (TA = 25 C), 15 kV HBM ESD on the switch contact pins (per the ST datasheet), break-before-make action, and an extremely low 0.2 uA quiescent current that preserves battery life in always-on portable designs. The 8-bump FlipChip footprint minimizes board area versus comparable SOT-23-6 SPDT switches, and the wide VCC range (1.65 V to 4.8 V) makes it directly compatible with 1.8 V, 2.5 V, 3.3 V and 4.3 V power rails commonly used in modern handsets. Architecturally the device integrates two back-to-back NMOS transistors per channel, providing bidirectional signal flow from 0 V to VCC. The break-before-make timing is built into the control logic, so no external sequencing is required when the SEL pin toggles state. Combined with the 15 kV contact ESD rating, the part reduces the need for external TVS protection on connector-adjacent signal lines. Typical applications include USB signal multiplexing in smartphones, audio jack / headphone switchover, GPIO expansion, and battery-monitoring signal routing. The wide VCC range also makes it suitable for handheld test equipment and portable medical sensor interfaces where low leakage and small footprint are required. When designing with the STG4160BJR, place decoupling capacitors (100 nF typical) as close as possible to the VCC bump and route the analog signals on a layer with a continuous ground plane. Confirm the maximum continuous current through the switch against the RON derating curve to keep insertion loss within budget. This page synthesizes distributor pricing, pin-compatible alternatives, and design notes not found in the manufacturer datasheet alone, providing an engineering-grade reference for selection and PCB implementation.

USD $0.14 재고 있음
STK443 - 2Ch 5-25W AF Power Amp Hybrid IC | SANYO
STK443

STK443 - 2Ch 5-25W AF Power Amp Hybrid IC | SANYO

The SANYO STK443 is a 2-channel (stereo) audio-frequency power amplifier built as a thick-film hybrid integrated circuit, delivering 5 W to 25 W minimum per channel into typical loudspeaker loads. It is supplied in a single inline SIP package with 10 formed leads, designed to be mounted through-hole on the amplifier PCB alongside its own heatsink tab. The STK443 was developed for low-cost split-supply consumer audio products where a compact, self-contained output stage simplifies board layout versus discrete complementary-pair designs. An AF (audio-frequency) power amplifier is the final active stage in an audio reproduction chain that drives a loudspeaker from a low-level signal source such as a preamplifier, mixer, or DAC output. Hybrid AF power ICs integrate input and driver transistors, output power devices, and biasing components on a single ceramic substrate, distinguishing them from monolithic silicon audio ICs by their higher output power, higher supply voltage tolerance, and larger physical footprint. Within the broader component taxonomy, the STK443 belongs to the amplifier IC category, which itself is a subset of analog signal-chain ICs and ultimately of power management and signal-conditioning semiconductors. The STK443 features a typical output of 2 x 25 W at low THD into a defined load impedance, operates over a wide supply range, and includes internal thermal protection. The dual-channel monolithic front end is followed by discrete power transistors mounted on the same substrate, a topology that lets the device source peak current demands while remaining economically viable for mass-produced stereo equipment. Built-in short-circuit and over-temperature shutdown protect the output stage against common fault conditions seen in consumer amplifiers. Typical applications for the STK443 include home stereo amplifiers, integrated A/V receivers, karaoke mixing amplifiers, powered speaker systems, and musical instrument practice amplifiers. It is also found in automotive head-unit audio outputs and as a retrofit replacement module in legacy SANYO-designed equipment where the original STK-series hybrid has failed and a same-form-factor part is required to avoid PCB rework. When designing with the STK443, observe the recommended heatsink thermal resistance and mounting torque to keep the substrate within its rated junction temperature under sustained full-power operation. Bypass supplies close to the module's VCC pins and use the recommended Zobel RC network across each output to maintain stability with reactive speaker loads. This page synthesizes distributor availability, parametric drop-in alternatives, and practical design notes gathered from SANYO documents and aftermarket datasheets not typically aggregated by catalog distributors.

USD $7.15 재고 있음
STM32C071C8T6 - 32-bit ARM Cortex-M0+ MCU, 64KB Flash | STMicroelectronics
STM32C071C8T6

STM32C071C8T6 - 32-bit ARM Cortex-M0+ MCU, 64KB Flash | STMicroelectronics

The STMicroelectronics STM32C071C8T6 is a 32-bit microcontroller based on the ARM Cortex-M0+ core, operating at up to 48 MHz. It features 64 KB of Flash memory and 16 KB of SRAM, packaged in a 48-pin LQFP (7x7 mm) with a 0.5 mm pitch. This device is part of the STM32C0 series, designed for cost-sensitive and power-efficient applications. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable input/output peripherals on a single chip. The STM32C071C8T6 belongs to the STM32 family, which is a broad portfolio of 32-bit MCUs based on ARM Cortex-M cores. Within the STM32C0 series, it targets entry-level applications that require a balance of performance, low power, and affordability. The Cortex-M0+ core is an energy-efficient processor optimized for simple control tasks, making it suitable for IoT devices, consumer electronics, and industrial control. Key features include a 12-bit ADC with up to 16 channels, multiple timers (including a 16-bit advanced-control timer), and a rich set of communication interfaces: I2C, SPI, USART, and a low-power UART. The device supports a wide supply voltage range of 2.0V to 3.6V, with an operating temperature range of -40°C to +85°C. It also includes a real-time clock (RTC), a CRC calculation unit, and a unique device ID for traceability. The STM32C071C8T6 is built on a 90nm process technology, offering low dynamic power consumption. It features multiple low-power modes (Sleep, Stop, Standby) to optimize energy usage in battery-powered designs. The device includes a nested vectored interrupt controller (NVIC) for efficient interrupt handling, and a memory protection unit (MPU) for enhanced security. The LQFP-48 package provides a compact footprint while offering sufficient I/O pins for peripheral connectivity. Typical applications include home automation sensors, smart appliances, portable medical devices, and industrial monitoring systems. Its low power consumption and rich peripheral set make it ideal for battery-operated IoT nodes that require periodic sensor readings and wireless communication. The device also supports firmware updates via a built-in bootloader, simplifying field maintenance. When designing with this MCU, ensure proper decoupling of the VDD pins with 100nF capacitors placed close to the device. The VDDA pin should be connected to a clean analog supply to minimize ADC noise. For low-power operation, configure unused GPIOs as analog inputs to reduce leakage current.

USD $1.38 재고 있음
STM32C091RCT6 - 256KB Flash ARM Cortex-M0+ MCU | STMicroelectronics
STM32C091RCT6

STM32C091RCT6 - 256KB Flash ARM Cortex-M0+ MCU | STMicroelectronics

The STMicroelectronics STM32C091RCT6 is a 32-bit microcontroller based on the ARM Cortex-M0+ core, operating at up to 48 MHz. It features 256 KB of Flash memory and 32 KB of SRAM, making it suitable for a wide range of embedded applications. The device is housed in a 64-pin LQFP package (LQFP64) with a 10x10 mm body and 0.5 mm pitch, providing a compact footprint for space-constrained designs. What is an ARM Cortex-M0+ microcontroller? The ARM Cortex-M0+ is the smallest, lowest-power ARM processor designed for embedded systems. It is a 32-bit RISC architecture that offers a balance between performance and energy efficiency, making it ideal for battery-powered and cost-sensitive applications. In the system hierarchy, a microcontroller (MCU) integrates a processor core, memory, and peripherals on a single chip, serving as the 'brain' of embedded systems. The Cortex-M0+ is part of the ARM Cortex-M family, which includes M0, M0+, M3, M4, and M7 cores, each offering different performance and feature levels. Key features of the STM32C091RCT6 include a 12-bit ADC with up to 16 channels, multiple timers (including advanced-control timers), and a comprehensive set of communication interfaces such as I2C, SPI, USART, and CAN. The device operates from a 2.0V to 3.6V power supply and supports an extended temperature range of -40°C to +85°C. It also includes a real-time clock (RTC), DMA controller, and various low-power modes (Sleep, Stop, and Standby) to optimize energy consumption. The STM32C091RCT6 is built on ST's advanced 90nm process technology, offering a good balance of performance and power efficiency. The Cortex-M0+ core includes a nested vectored interrupt controller (NVIC) for efficient interrupt handling, and the device supports both JTAG and SWD debugging interfaces. The memory architecture includes a single bank of Flash with read-while-write support, enabling firmware updates without halting the system. Typical applications include industrial control systems, consumer electronics, IoT devices, smart home automation, and motor control. The rich peripheral set and low power consumption make it a versatile choice for many embedded projects. For example, in an IoT sensor node, the STM32C091RCT6 can manage sensor data acquisition, process it locally, and communicate via UART or SPI to a wireless module. When designing with this MCU, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin. The VDDA pin should be connected to a clean analog supply, and the VREF+ pin should be decoupled with a 1uF capacitor for accurate ADC conversions. Also, consider the crystal oscillator layout for the HSE (high-speed external) clock to minimize noise and ensure stable operation.

USD $2.88 재고 있음
STM32C531CBU6 - 144MHz Cortex-M33 MCU, 128KB Flash | ST
STM32C531CBU6

STM32C531CBU6 - 144MHz Cortex-M33 MCU, 128KB Flash | ST

The STMicroelectronics STM32C531CBU6 is a mainstream 32-bit microcontroller based on the Arm Cortex-M33 core running at up to 144 MHz, with 128 KB of flash memory, 64 KB of SRAM, and an I3C interface, housed in a 48-pin UFQFPN (7x7 mm) package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest layer of the embedded processing hierarchy: Cortex-M33 core -> MCU -> embedded system. Mainstream MCUs like the STM32C5 series target cost-sensitive general-purpose designs that still require high performance, low power consumption, and modern security features. Key features of the STM32C531CBU6 include the single-precision FPU inside the Cortex-M33 core, which supports all Arm single-precision data-processing instructions and data types, enabling efficient floating-point math for sensor fusion and control loops. The 144 MHz core clock delivers high computation throughput, while the 128 KB flash and 64 KB RAM provide headroom for protocol stacks and application code. The integrated I3C interface provides a forward-looking, two-wire sensor bus that is backward-compatible with I2C. According to the STMicroelectronics datasheet, the STM32C53xxx family is fabricated on ST's 40 nm process technology, balancing performance, power, and cost. The device targets cost-sensitive applications that require a balance between high performance, low power consumption, and high security. Typical applications include industrial sensors, consumer appliances, motor control, IoT endpoints, and building automation nodes, where the 144 MHz Cortex-M33 and I3C support fast sensor aggregation. Design consideration: verify pin mapping against the official STM32C531CB datasheet before layout, and use ST's STM32CubeMX tool for pinout and clock configuration. This page adds distributor sourcing data, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet alone.

USD $2.28 재고 있음
STM32C531FBU6 - Cortex-M33 144MHz MCU | STMicroelectronics
STM32C531FBU6

STM32C531FBU6 - Cortex-M33 144MHz MCU | STMicroelectronics

The STMicroelectronics STM32C531FBU6 is a mainstream 32-bit microcontroller based on the Arm Cortex-M33 RISC core with single-precision FPU, operating at up to 144 MHz, with I3C support, housed in a 48-pin UFQFPN (7x7 mm) package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory (flash and SRAM), and a rich set of peripherals on one die, sitting at the lowest level of the embedded-system hierarchy: semiconductor -> microcontroller -> embedded system. The STM32C5 series belongs to STMicroelectronics' mainstream STM32 family of Arm Cortex-M based 32-bit MCUs, positioned for cost-sensitive general-purpose designs. Key features include the high-performance Cortex-M33 core executing from flash at 144 MHz, a single-precision floating-point unit (FPU) supporting all Arm single-precision data-processing instructions and data types, and the I3C interface - a backward-compatible successor to I2C that enables higher throughput and dynamic addressing. General-purpose 32-bit MCUs of this class are used in motor control, consumer appliances, IoT nodes, and industrial automation. Technically, the STM32C53xxx family shares the same platform architecture, memory map, and peripheral set, which means code written for one flash density variant runs unmodified on another - a significant advantage for product families spanning multiple memory options. The FPU offloads floating-point math from software emulation, freeing CPU cycles for control loops and signal processing. Typical applications include industrial sensors and actuators, home appliances, building automation, and USB/I3C-connected peripherals where 144 MHz headroom and hardware floating-point improve response time and precision. Design consideration: verify the exact flash and RAM density of the F-grade variant against the ST datasheet before finalizing the linker script, and confirm UFQFPN-48 footprint thermal-pad soldering for ground integrity. This page synthesizes verified distributor data, drop-in family alternatives, and practical design guidance not found in a single manufacturer document.

USD $1.86 재고 있음
STM32C542RCT6 - Cortex-M33 144MHz 256KB MCU | STMicroelectronics
STM32C542RCT6

STM32C542RCT6 - Cortex-M33 144MHz 256KB MCU | STMicroelectronics

The STMicroelectronics STM32C542RCT6 is a mainstream 32-bit microcontroller based on the Arm Cortex-M33 core with FPU, running at up to 144 MHz and housed in a 64-pin LQFP (10x10 mm) package. It integrates 256 KB of flash memory with ECC (2 banks, read-while-write), 64 KB of SRAM (including 32 KB with ECC), and 64 KB of user data flash memory in 2 banks. A microcontroller (MCU) is a single-chip embedded computer that combines a processor core, memory, and peripherals on one die. Within the semiconductor hierarchy, the STM32C542RCT6 sits under 32-bit microcontrollers -> embedded processors -> semiconductors, and belongs to the STM32C5 mainstream general-purpose family from STMicroelectronics. Key features include the Arm Cortex-M33 32-bit RISC core with single-precision FPU, Memory Protection Unit (MPU), and DSP instructions; I3C and dual FDCAN interfaces for modern sensor and automotive-adjacent networking; and hardware cryptographic acceleration for secure embedded designs. The ECC-protected flash and SRAM improve reliability in applications where bit errors cannot be tolerated. Architecturally, the Cortex-M33 implements the Armv8-M mainline profile, combining deterministic real-time behavior with TrustZone-class security features supported by the on-chip crypto block. The 144 MHz operating frequency and single-cycle FPU make it suitable for control-loop and signal-processing workloads that exceed classic Cortex-M4 mainstream parts. Typical applications include industrial control and automation nodes, CAN/FDCAN networking gateways, IoT sensor hubs using I3C, consumer appliances, and secure connected devices. Design consideration: the LQFP-64 10x10 mm footprint requires a standard surface-mount reflow process; plan decoupling capacitors on each VDD pin pair and follow the ST layout guidelines in the datasheet for VDDA/VSSA isolation to preserve ADC accuracy. This page synthesizes distributor pricing tiers, drop-in same-family alternatives, pinout data, and practical design notes not found in the manufacturer datasheet alone.

USD $3.05 재고 있음
STM32C562RET6 - 144MHz Cortex-M33 MCU, 512KB Flash | ST
STM32C562RET6

STM32C562RET6 - 144MHz Cortex-M33 MCU, 512KB Flash | ST

The STMicroelectronics STM32C562RET6 is a mainstream 32-bit microcontroller based on the Arm Cortex-M33 core running at up to 144 MHz, with 512 KB of flash memory and 128 KB of SRAM, housed in a 64-pin LQFP (10 x 10 mm) package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals on one die, forming the complete brain of an embedded system. Within the semiconductor hierarchy, the STM32C562RET6 belongs to the STMicroelectronics STM32C5 Series of general-purpose microcontrollers, which sits in the broader family of Arm Cortex-M based MCUs and the wider class of system-on-chip (SoC) devices used in industrial, consumer, and automotive-adjacent electronics. Key features of the STM32C562RET6 include the high-performance Cortex-M33 RISC core with a single-precision floating-point unit (FPU) supporting all Arm single-precision data-processing instructions and data types, 512 KB of on-chip flash for program storage, 128 KB of SRAM for data and stacks, and a peripheral set that includes I3C, FDCAN, and hardware cryptographic acceleration. The FPU eliminates software floating-point emulation, while the crypto hardware offloads encryption tasks from the CPU. From a technical standpoint, the Cortex-M33 core implements the Armv8-M architecture, which brings hardware-enforced security foundations and a higher instruction efficiency than earlier Cortex-M3/M4 generations. At 144 MHz, the core delivers substantial real-time processing headroom for control loops, communication stacks, and signal processing. The FDCAN controller supports modern CAN-FD vehicle and industrial networks with larger payloads, and I3C provides a backward-compatible, faster successor to I2C for sensor connectivity. Typical applications include industrial automation and motor control nodes leveraging FDCAN, IoT sensor hubs using I3C for multi-sensor buses, and secure connected devices where the integrated crypto accelerator protects firmware and communications. The 64-pin LQFP with 0.5 mm pitch suits hand-solderable prototypes and automated assembly alike. When designing with this MCU, budget the 512 KB flash and 128 KB RAM carefully: the Armv8-M secure/non-secure partitioning and crypto key storage consume memory, and FDCAN applications should size message RAM according to worst-case bus load. This page synthesizes distributor pricing context, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with all core parameters verified against ST official sources as of 2026-10-18.

견적 요청 재고 있음
STM32C591RET6 - Cortex-M33 144MHz 512KB MCU | STMicroelectronics
STM32C591RET6

STM32C591RET6 - Cortex-M33 144MHz 512KB MCU | STMicroelectronics

The STMicroelectronics STM32C591RET6 is a mainstream 32-bit microcontroller based on the Arm Cortex-M33 core with single-precision FPU, running at up to 144 MHz, with 512 KB of Flash memory and 256 KB of SRAM, housed in a 64-pin LQFP (10 x 10 mm) package. It belongs to the STM32C5 series and adds the I3C interface for next-generation sensor connectivity. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals such as timers, UARTs, SPI, I2C, and ADCs on one die. Within the semiconductor hierarchy, the STM32C591RET6 sits in the general-purpose MCU family -> ARM Cortex-M based microcontroller -> STM32 product line -> STMicroelectronics portfolio. MCUs like this one run deterministic real-time firmware for embedded control, sensing, and connectivity tasks that neither application processors nor simple 8-bit controllers handle as efficiently. Key features of the STM32C591RET6 include the high-performance Cortex-M33F core at 144 MHz with a single-precision floating-point unit supporting all Arm single-precision data-processing instructions and data types, a large 512 KB on-chip Flash for code storage, and 256 KB of SRAM for buffers and stacks. The integrated I3C interface provides backward-compatible I2C operation plus higher-throughput, lower-pin-count sensor communication, which is a differentiator versus older STM32 mainstream families. Architecturally, the STM32C59xxx devices are general-purpose members of the STM32C5 series, designed by STMicroelectronics as an upgrade path for mainstream designs. The Armv8-M based Cortex-M33 core brings improved instruction efficiency and security foundations compared with Cortex-M4, making the part suitable for modern connected products that need headroom for protocol stacks and signal processing. Typical applications include industrial automation nodes, consumer appliances, motor control and power-management boards, IoT sensor gateways using I3C, and embedded systems migrating from STM32F4/L4 mainstream parts that need more RAM and a security-oriented core. A key design consideration is verifying the LQFP-64 (10x10 mm) footprint and I3C bus pull-up requirements early in layout, since the 64-pin variant limits available GPIO and peripheral multiplexing versus 100-pin family members. This page synthesizes verified distributor data, pricing tiers, drop-in alternatives, and practical design notes beyond what a single datasheet page provides.

USD $4.65 재고 있음
STM32C593ZGT6 - 144MHz Cortex-M33 MCU 1MB Flash | ST
STM32C593ZGT6

STM32C593ZGT6 - 144MHz Cortex-M33 MCU 1MB Flash | ST

The STMicroelectronics STM32C593ZGT6 is a mainstream 32-bit microcontroller based on the Arm Cortex-M33 core running at 144 MHz, integrating 1 MB of flash memory, 256 KB of SRAM, and a rich peripheral set including I3C, Ethernet, and dual FDCAN, all packaged in a 144-pin LQFP (20 x 20 mm) surface-mount package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, sitting at the heart of the embedded systems hierarchy: MCU -> embedded processor -> semiconductor device. The STM32C5 series belongs to STMicroelectronics' STM32 mainstream family, positioned for cost-sensitive general-purpose applications that still require modern connectivity and security features inherited from the higher-performance STM32 lines. Key features include the Arm Cortex-M33 32-bit RISC core with a single-precision floating-point unit (FPU) supporting all Arm single-precision data-processing instructions, up to 144 MHz operation, 1 MB (1M x 8) of on-chip flash for code and data storage, and 256 KB of SRAM for buffers and stacks. The peripheral complement - I3C for next-generation sensor interfaces, an Ethernet MAC for networked designs, and dual FDCAN controllers for automotive and industrial fieldbus - differentiates this part from lower-tier mainstream MCUs. According to the STM32C59xxx datasheet, the devices are general-purpose microcontrollers based on the high-performance Arm Cortex-M33 32-bit RISC core, with the FPU executing hardware-accelerated floating-point math for control algorithms, digital filtering, and sensor fusion. The Cortex-M33 architecture also brings Armv8-M security foundations, enabling TrustZone-class isolation features that legacy Cortex-M4 parts lack. Typical applications include industrial automation nodes using dual FDCAN fieldbus, networked IoT gateways leveraging the Ethernet MAC, and motor control or power-conversion systems exploiting the FPU at 144 MHz. The I3C interface supports modern sensor rings with lower pin counts than I2C/SPI combinations. When designing with the STM32C593ZGT6, budget flash and RAM headroom for the Ethernet stack, and verify pin multiplexing on the 144-LQFP footprint early, since the peripheral-rich die maps many functions onto shared pins. Development is supported by STM32Cube ecosystem tools and HAL libraries. This page synthesizes verified distributor listings, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $3.48 재고 있음
STM32C5A3ZGT6 - 144MHz Cortex-M33 MCU, 1MB Flash | ST
STM32C5A3ZGT6

STM32C5A3ZGT6 - 144MHz Cortex-M33 MCU, 1MB Flash | ST

The STMicroelectronics STM32C5A3ZGT6 is a general-purpose 32-bit microcontroller based on the Arm Cortex-M33 core with single-precision FPU, running at up to 144 MHz, with 1 MB of ECC-protected flash memory and 256 KB of SRAM, housed in a 144-pin LQFP (20x20 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals on one die, forming the lowest layer of the embedded processing hierarchy (MCU -> embedded processor -> application processor -> system-on-chip). Within the STM32 portfolio, the STM32C5 series sits in ST's mainstream general-purpose MCU family, positioned for cost-sensitive industrial and consumer designs that still require modern security and connectivity features. Key features of the STM32C5A3ZGT6 include a 1 MB flash with ECC and 2-bank read-while-write architecture, 256 KB SRAM of which 128 KB is ECC-protected, and a rich peripheral set highlighted by I3C, Ethernet MAC, and dual FDCAN controllers. An MPU (memory protection unit), DSP instructions, and cryptographic hardware acceleration round out the feature set, enabling functional partitioning and secure firmware upgrade schemes such as secure boot. Technically, the Cortex-M33 is an Armv8-M mainline core: the FPU supports all Arm single-precision data-processing instructions and data types, while the MPU enables privilege separation between application and bootloader code. Dual-bank flash with ECC supports live firmware updates without downtime, and the ECC-protected SRAM half reduces the risk of silent data corruption in electrically noisy industrial environments. Typical applications include industrial automation nodes and PLC I/O modules (dual FDCAN and Ethernet), building control and motor control systems leveraging the 144 MHz headroom, and connected IoT gateways that exploit I3C for modern sensor attachment. The large on-chip memory eliminates external flash in most designs, improving BOM cost and reliability. For design, note that the crypto-capable variant helps meet security requirements, but plan the power supply and clock tree early - Ethernet and FDCAN operation at 144 MHz demand clean decoupling across the 144-pin LQFP footprint. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4.20 재고 있음
STM32F030C6T6 - 48MHz Cortex-M0 MCU, 32KB Flash, LQFP-48 | STMicroelectronics
STM32F030C6T6

STM32F030C6T6 - 48MHz Cortex-M0 MCU, 32KB Flash, LQFP-48 | STMicroelectronics

The STMicroelectronics STM32F030C6T6 is a 32-bit ARM Cortex-M0 value-line microcontroller from the STM32F0 series, integrating a 48 MHz RISC core, 32 KB of embedded Flash, 4 KB of SRAM, and a rich set of peripherals in a 48-pin LQFP package (7x7 mm). It operates across a 2.4V to 3.6V supply range and is specified from -40C to +85C for industrial-grade use. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit that combines a processor core, non-volatile program memory (Flash), volatile data memory (SRAM), and programmable input/output peripherals on a single die. In the system hierarchy, an MCU is an embedded processor, which falls under the broader category of integrated circuits and semiconductors. The STM32F030C6T6 sits in the mainstream 32-bit segment, positioned above legacy 8-bit MCUs and below high-performance application processors, offering an economical entry point into the ARM Cortex-M ecosystem with deterministic real-time behavior. Key features of the STM32F030C6T6 include a 12-bit SAR ADC with up to 10 external channels, two 16-bit general-purpose timers plus one 16-bit advanced-control timer for PWM, a 32-bit real-time timer, and a 5-channel DMA controller. Communication interfaces comprise I2C, SPI, and USART, and the device exposes up to 39 GPIO pins. The integrated 4 MHz to 32 MHz external crystal oscillator and internal 8 MHz RC with PLL enable flexible clocking. Low-power Sleep, Stop, and Standby modes are supported for battery-powered designs. From a technical perspective, the Cortex-M0 core implements the ARMv6-M architecture with a 3-stage pipeline, delivering 0.9 DMIPS/MHz and supporting Thumb/Thumb-2 instruction subsets. The 32 KB Flash supports read-while-write, enabling in-field firmware upgrades without halting execution. A 96-bit unique device ID and a cyclic redundancy check (CRC) hardware unit assist in traceability and data integrity. The NVIC provides deterministic interrupt handling with configurable priority levels. Typical applications include industrial sensor interfaces, home automation nodes, consumer white goods, low-cost motor control, LED lighting drivers, and USB-to-UART bridges. The combination of timers, ADC, and DMA enables efficient closed-loop control, while the small LQFP-48 footprint supports compact PCB layouts. When designing with this device, decouple each VDD pin with a 100 nF X7R ceramic capacitor placed within 3 mm of the pin, and add a 4.7 uF bulk capacitor on the main rail. Configure the BOOT0 pin to select Flash, System memory (USART bootloader), or SRAM boot. The SWD interface requires only two pins (SWDIO/SWCLK) plus GND, simplifying in-circuit programming and debug. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, providing a comprehensive resource for engineers evaluating the STM32F030C6T6.

USD $1.15 재고 있음
STM32F030C6T6TR - 48MHz Cortex-M0 MCU, 32KB Flash, LQFP-48 | STMicroelectronics (Tape & Reel)
STM32F030C6T6TR

STM32F030C6T6TR - 48MHz Cortex-M0 MCU, 32KB Flash, LQFP-48 | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F030C6T6TR is a 32-bit ARM Cortex-M0 value-line microcontroller from the STM32F0 series, integrating a 48 MHz RISC core, 32 KB of embedded Flash, 4 KB of SRAM, and a rich set of peripherals in a 48-pin LQFP package (7x7 mm). It operates across a 2.4V to 3.6V supply range and is specified from -40C to +85C for industrial-grade use. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit that combines a processor core, non-volatile program memory (Flash), volatile data memory (SRAM), and programmable input/output peripherals on a single die. In the system hierarchy, an MCU is an embedded processor, which falls under the broader category of integrated circuits and semiconductors. The STM32F030C6T6TR sits in the mainstream 32-bit segment, positioned above legacy 8-bit MCUs and below high-performance application processors, offering an economical entry point into the ARM Cortex-M ecosystem with deterministic real-time behavior. Key features of the STM32F030C6T6TR include a 12-bit SAR ADC with up to 10 external channels, two 16-bit general-purpose timers plus one 16-bit advanced-control timer for PWM, a 32-bit real-time timer, and a 5-channel DMA controller. Communication interfaces comprise I2C, SPI, and USART, and the device exposes up to 39 GPIO pins. The integrated 4 MHz to 32 MHz external crystal oscillator and internal 8 MHz RC with PLL enable flexible clocking. Low-power Sleep, Stop, and Standby modes are supported for battery-powered designs. From a technical perspective, the Cortex-M0 core implements the ARMv6-M architecture with a 3-stage pipeline, delivering 0.9 DMIPS/MHz and supporting Thumb/Thumb-2 instruction subsets. The 32 KB Flash supports read-while-write, enabling in-field firmware upgrades without halting execution. A 96-bit unique device ID and a cyclic redundancy check (CRC) hardware unit assist in traceability and data integrity. The NVIC provides deterministic interrupt handling with configurable priority levels. Typical applications include industrial sensor interfaces, home automation nodes, consumer white goods, low-cost motor control, LED lighting drivers, and USB-to-UART bridges. The combination of timers, ADC, and DMA enables efficient closed-loop control, while the small LQFP-48 footprint supports compact PCB layouts. When designing with this device, decouple each VDD pin with a 100 nF X7R ceramic capacitor placed within 3 mm of the pin, and add a 4.7 uF bulk capacitor on the main rail. Configure the BOOT0 pin to select Flash, System memory (USART bootloader), or SRAM boot. The SWD interface requires only two pins (SWDIO/SWCLK) plus GND, simplifying in-circuit programming and debug. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, providing a comprehensive resource for engineers evaluating the STM32F030C6T6TR.

USD $0.41 재고 있음
STM32F030C8T6 - 48MHz Cortex-M0 MCU 64KB Flash | STMicroelectronics
STM32F030C8T6

STM32F030C8T6 - 48MHz Cortex-M0 MCU 64KB Flash | STMicroelectronics

The STMicroelectronics STM32F030C8T6 is a 32-bit ARM Cortex-M0 microcontroller running at up to 48 MHz with 64 KB of Flash memory and 8 KB of SRAM, housed in a 48-pin LQFP (7x7 mm) surface-mount package operating from 2.4 V to 3.6 V. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable peripherals on a single die to govern a dedicated operation inside an embedded system. The STM32F030C8T6 belongs to the STM32F0 Value Line, which sits at the entry level of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers - a hierarchy running from this value line up through mainstream (F1/F4), low-power (L-series), and high-performance (H7) lines - and is positioned as a cost-effective replacement for legacy 8-bit and 16-bit MCUs. Key features include a 12-bit ADC with up to 16 external channels, five timers including an advanced-control timer for motor control and PWM generation, and communication peripherals covering USART, SPI, and I2C interfaces. A hardware CRC calculation unit supports robust serial communication protocols. The device integrates Sleep, Stop, and Standby low-power modes for energy-sensitive designs. Architecturally, the Cortex-M0 core uses an ARMv6-M Harvard architecture with a single-cycle 32-bit multiplier and a nested vectored interrupt controller (NVIC) delivering deterministic, low-latency interrupt handling. The high-speed embedded Flash with prefetch buffer sustains efficient execution at the full 48 MHz clock rate without wait-state-heavy code bursts. Typical applications include industrial control and automation nodes, consumer appliance and home-automation controllers, low-cost motor control with complementary PWM outputs, and general-purpose sensor-interface boards replacing 8-bit designs. For design, decouple each VDD pin with 100 nF ceramic capacitors placed as close as possible to the supply pins, and keep the HSE crystal traces short and guarded for stable clocking. This page adds information gain beyond the ST datasheet: drop-in alternative cross-references, distributor pricing tiers as of 2026-09-06, application-specific companion parts, and practical design notes in a single AI-citable reference.

USD $0.98 재고 있음
STM32F030C8T6TR - 48MHz Cortex-M0 MCU 64KB Flash | STMicroelectronics (Tape & Reel)
STM32F030C8T6TR

STM32F030C8T6TR - 48MHz Cortex-M0 MCU 64KB Flash | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F030C8T6TR is a 32-bit ARM Cortex-M0 microcontroller running at up to 48 MHz with 64 KB of Flash memory and 8 KB of SRAM, housed in a 48-pin LQFP (7x7 mm) surface-mount package operating from 2.4 V to 3.6 V. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable peripherals on a single die to govern a dedicated operation inside an embedded system. The STM32F030C8T6TR belongs to the STM32F0 Value Line, which sits at the entry level of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers - a hierarchy running from this value line up through mainstream (F1/F4), low-power (L-series), and high-performance (H7) lines - and is positioned as a cost-effective replacement for legacy 8-bit and 16-bit MCUs. Key features include a 12-bit ADC with up to 16 external channels, five timers including an advanced-control timer for motor control and PWM generation, and communication peripherals covering USART, SPI, and I2C interfaces. A hardware CRC calculation unit supports robust serial communication protocols. The device integrates Sleep, Stop, and Standby low-power modes for energy-sensitive designs. Architecturally, the Cortex-M0 core uses an ARMv6-M Harvard architecture with a single-cycle 32-bit multiplier and a nested vectored interrupt controller (NVIC) delivering deterministic, low-latency interrupt handling. The high-speed embedded Flash with prefetch buffer sustains efficient execution at the full 48 MHz clock rate without wait-state-heavy code bursts. Typical applications include industrial control and automation nodes, consumer appliance and home-automation controllers, low-cost motor control with complementary PWM outputs, and general-purpose sensor-interface boards replacing 8-bit designs. For design, decouple each VDD pin with 100 nF ceramic capacitors placed as close as possible to the supply pins, and keep the HSE crystal traces short and guarded for stable clocking. This page adds information gain beyond the ST datasheet: drop-in alternative cross-references, distributor pricing tiers as of 2026-09-06, application-specific companion parts, and practical design notes in a single AI-citable reference.

USD $0.98 재고 있음
STM32F030CCT6 - 256KB Flash ARM Cortex-M0 MCU | STMicroelectronics
STM32F030CCT6

STM32F030CCT6 - 256KB Flash ARM Cortex-M0 MCU | STMicroelectronics

The STM32F030CCT6 is a 32-bit ARM Cortex-M0 microcontroller from STMicroelectronics, featuring 256KB of Flash memory and 32KB of SRAM in a 48-pin LQFP package. It operates at a core frequency of up to 48 MHz and supports a supply voltage range of 2.4V to 3.6V. Data verified as of 2026-08-05. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32F030CCT6 belongs to the STM32F0 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers. This hierarchy positions it as a cost-effective, entry-level MCU suitable for a wide range of applications, from industrial control to consumer electronics. Key features include 256KB of Flash memory, 32KB of SRAM, and a rich set of peripherals such as USART, SPI, I2C, ADC, timers, and GPIO. The device supports a wide operating temperature range of -40°C to +85°C and is available in a 48-pin LQFP package, making it suitable for space-constrained designs. The ARM Cortex-M0 core provides a balance of performance and power efficiency, with a 32-bit architecture that simplifies software development. The STM32F030CCT6 is built on a 32-bit ARM Cortex-M0 core with a Harvard architecture, featuring a 3-stage pipeline and a nested vectored interrupt controller (NVIC). It includes a 12-bit ADC with up to 16 channels, multiple 16-bit timers, and a DMA controller for efficient data transfer. The device also supports a variety of low-power modes, including Sleep, Stop, and Standby, enabling energy-efficient operation in battery-powered applications. Typical applications include industrial control systems, motor control, consumer electronics, and IoT devices. The STM32F030CCT6 is well-suited for these applications due to its low cost, low power consumption, and comprehensive peripheral set. For example, in motor control, the advanced timers and ADC enable precise PWM generation and current sensing, while in IoT devices, the low-power modes extend battery life. When designing with this device, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to the VDD pins. Additionally, configure the clock source appropriately, as the internal HSI oscillator provides a 8 MHz clock that can be used for cost-sensitive designs, while an external crystal can be used for higher accuracy. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the STMicroelectronics datasheet, providing a comprehensive resource for engineers evaluating the STM32F030CCT6.

USD $1.48 재고 있음
STM32F030CCT6TR - 256KB Flash ARM Cortex-M0 MCU | STMicroelectronics (Tape & Reel)
STM32F030CCT6TR

STM32F030CCT6TR - 256KB Flash ARM Cortex-M0 MCU | STMicroelectronics (Tape & Reel)

The STM32F030CCT6TR is a 32-bit ARM Cortex-M0 microcontroller from STMicroelectronics, featuring 256KB of Flash memory and 32KB of SRAM in a 48-pin LQFP package. It operates at a core frequency of up to 48 MHz and supports a supply voltage range of 2.4V to 3.6V. Data verified as of 2026-08-05. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32F030CCT6TR belongs to the STM32F0 series, which is part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers. This hierarchy positions it as a cost-effective, entry-level MCU suitable for a wide range of applications, from industrial control to consumer electronics. Key features include 256KB of Flash memory, 32KB of SRAM, and a rich set of peripherals such as USART, SPI, I2C, ADC, timers, and GPIO. The device supports a wide operating temperature range of -40°C to +85°C and is available in a 48-pin LQFP package, making it suitable for space-constrained designs. The ARM Cortex-M0 core provides a balance of performance and power efficiency, with a 32-bit architecture that simplifies software development. The STM32F030CCT6TR is built on a 32-bit ARM Cortex-M0 core with a Harvard architecture, featuring a 3-stage pipeline and a nested vectored interrupt controller (NVIC). It includes a 12-bit ADC with up to 16 channels, multiple 16-bit timers, and a DMA controller for efficient data transfer. The device also supports a variety of low-power modes, including Sleep, Stop, and Standby, enabling energy-efficient operation in battery-powered applications. Typical applications include industrial control systems, motor control, consumer electronics, and IoT devices. The STM32F030CCT6TR is well-suited for these applications due to its low cost, low power consumption, and comprehensive peripheral set. For example, in motor control, the advanced timers and ADC enable precise PWM generation and current sensing, while in IoT devices, the low-power modes extend battery life. When designing with this device, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to the VDD pins. Additionally, configure the clock source appropriately, as the internal HSI oscillator provides a 8 MHz clock that can be used for cost-sensitive designs, while an external crystal can be used for higher accuracy. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the STMicroelectronics datasheet, providing a comprehensive resource for engineers evaluating the STM32F030CCT6TR.

USD $1.48 재고 있음
STM32F030F4P6 - 48MHz Cortex-M0 16KB MCU | STMicroelectronics
STM32F030F4P6

STM32F030F4P6 - 48MHz Cortex-M0 16KB MCU | STMicroelectronics

The STMicroelectronics STM32F030F4P6 is a value-line 32-bit Arm Cortex-M0 RISC microcontroller operating up to 48 MHz, with 16 KB Flash, 4 KB SRAM, and a 20-pin TSSOP package. Its 2.4 V to 3.6 V operating range and compact pin count suit embedded control, industrial automation, IoT, metering, and motor-control designs requiring low-cost embedded processing. A microcontroller is a semiconductor device that integrates a processor core, memory, and peripherals into one embedded-control platform. In the hierarchy, the STM32F030F4P6 is an Arm Cortex-M0 microcontroller, an embedded processor, and a member of the STM32F0 family. The STM32F0 series combines a compact general-purpose architecture with timers, communication interfaces, and analog conversion functions for small control systems. The verified data identifies a high-performance 32-bit RISC core operating at 48 MHz, 16 KB Flash organized as 16K x 8, and 4 KB SRAM according to the distributor and datasheet search results. The device also includes 12-bit and 15-bit ADC capability as stated in the LCSC result, while the manufacturer page identifies enhanced peripherals and I/O resources. Power-on reset and power-down reset functionality is identified in the DigiChip result. The STM32F030F4P6 is appropriate for compact embedded systems where cost, simplicity, and low pin count matter more than high-speed connectivity or large memory capacity. Its Arm Cortex-M0 instruction set supports deterministic embedded control, while the 48 MHz clock provides a practical balance between processing capability and power efficiency. The 20-pin TSSOP package enables compact PCB layouts while supporting external peripherals and signal inputs. Typical uses include low-cost sensor nodes, simple industrial controllers, compact motor-control stages, digital meters, and connected IoT devices. Designers must ensure that the selected firmware, clock tree, peripherals, and board-level support devices match the STM32F030x4 device requirements. The exact pin function, electrical limits, peripheral configuration, and package dimensions should be confirmed against the STMicroelectronics datasheet. For a new design, the 48 MHz Cortex-M0 core and 16 KB Flash make the STM32F030F4P6 most suitable for small control loops and auxiliary processing rather than complex graphical or high-bandwidth workloads. The TSSOP-20 package also requires careful PCB escape routing and adequate pin-copper clearance during assembly. This page combines verified manufacturer and distributor information, source links, package details, engineering use cases, and replacement considerations to support component selection and sourcing. Because the supplied data does not include a complete verified pin table or all peripheral electrical limits, those fields are intentionally not guessed.

USD $0.58 재고 있음
STM32F030F4P6TR - 48MHz Cortex-M0 16KB MCU | STMicroelectronics (Tape & Reel)
STM32F030F4P6TR

STM32F030F4P6TR - 48MHz Cortex-M0 16KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F030F4P6TR is a value-line 32-bit Arm Cortex-M0 RISC microcontroller operating up to 48 MHz, with 16 KB Flash, 4 KB SRAM, and a 20-pin TSSOP package. Its 2.4 V to 3.6 V operating range and compact pin count suit embedded control, industrial automation, IoT, metering, and motor-control designs requiring low-cost embedded processing. A microcontroller is a semiconductor device that integrates a processor core, memory, and peripherals into one embedded-control platform. In the hierarchy, the STM32F030F4P6TR is an Arm Cortex-M0 microcontroller, an embedded processor, and a member of the STM32F0 family. The STM32F0 series combines a compact general-purpose architecture with timers, communication interfaces, and analog conversion functions for small control systems. The verified data identifies a high-performance 32-bit RISC core operating at 48 MHz, 16 KB Flash organized as 16K x 8, and 4 KB SRAM according to the distributor and datasheet search results. The device also includes 12-bit and 15-bit ADC capability as stated in the LCSC result, while the manufacturer page identifies enhanced peripherals and I/O resources. Power-on reset and power-down reset functionality is identified in the DigiChip result. The STM32F030F4P6TR is appropriate for compact embedded systems where cost, simplicity, and low pin count matter more than high-speed connectivity or large memory capacity. Its Arm Cortex-M0 instruction set supports deterministic embedded control, while the 48 MHz clock provides a practical balance between processing capability and power efficiency. The 20-pin TSSOP package enables compact PCB layouts while supporting external peripherals and signal inputs. Typical uses include low-cost sensor nodes, simple industrial controllers, compact motor-control stages, digital meters, and connected IoT devices. Designers must ensure that the selected firmware, clock tree, peripherals, and board-level support devices match the STM32F030x4 device requirements. The exact pin function, electrical limits, peripheral configuration, and package dimensions should be confirmed against the STMicroelectronics datasheet. For a new design, the 48 MHz Cortex-M0 core and 16 KB Flash make the STM32F030F4P6TR most suitable for small control loops and auxiliary processing rather than complex graphical or high-bandwidth workloads. The TSSOP-20 package also requires careful PCB escape routing and adequate pin-copper clearance during assembly. This page combines verified manufacturer and distributor information, source links, package details, engineering use cases, and replacement considerations to support component selection and sourcing. Because the supplied data does not include a complete verified pin table or all peripheral electrical limits, those fields are intentionally not guessed.

USD $0.58 재고 있음
STM32F030K6T6 - 48MHz Cortex-M0 32KB MCU | STMicroelectronics
STM32F030K6T6

STM32F030K6T6 - 48MHz Cortex-M0 32KB MCU | STMicroelectronics

The STMicroelectronics STM32F030K6T6 is a 32-bit Arm Cortex-M0 microcontroller operating at 48 MHz, with 32 KB of Flash memory, 4 KB of SRAM, and a 32-pin LQFP package measuring 7 x 7 mm. It operates from a 2.4 V to 3.6 V supply and combines a compact general-purpose MCU platform with timers, a 12-bit ADC, and communication interfaces. The STM32F030K6 family targets cost-sensitive embedded systems requiring reliable control, data acquisition, and serial connectivity without a high pin count. A microcontroller is a semiconductor that integrates a processor core, memory, and peripherals into one integrated circuit. In the system hierarchy, this device is a microcontroller within the semiconductor category, while its Arm Cortex-M0 core provides a compact RISC architecture for embedded control. Compared with a general-purpose processor, the STM32F030K6T6 integrates the resources needed for real-time firmware execution, peripheral control, and low-power embedded operation on a single device. Key verified features include a 48 MHz maximum CPU frequency, 32 KB of Flash, 4 KB of SRAM, and a 12-bit ADC. The manufacturer describes the STM32F030x4, x6, x8, and xC devices as value-line Arm-based 32-bit MCUs with timers, ADC resources, communication interfaces, and 2.4 V to 3.6 V operation. The 32-LQFP package provides a practical surface-mount footprint for compact industrial and consumer equipment. The device is suitable for simple motor-control peripherals, sensor-hub controllers, compact instrument panels, communication modules, low-speed actuator controllers, and embedded measurement systems. Its 32 KB Flash and 4 KB SRAM fit moderate control loops, protocol stacks, and state machines, although applications requiring larger buffers or image storage should plan memory carefully. The 12-bit ADC supports analog measurements, while communication peripherals enable connection to sensors, displays, and external controllers. When designing a board, begin with the manufacturer datasheet for the complete pin, electrical, timing, and memory map. Provide a stable 2.4 V to 3.6 V supply, route decoupling close to the device, preserve the required reset and clock behavior, and validate unused pins according to the datasheet. Firmware compatibility and peripheral behavior must be checked against the exact STM32F030K6 variant rather than inferred from another STM32 family member. This product page combines verified distributor and manufacturer-source information with package-specific engineering guidance. It identifies the STM32F030K6T6 as the 32 KB, 48 MHz, 32-LQFP member of the STM32F0 value-line family and separates verified specifications from parameters that require design confirmation.

견적 요청 재고 있음
STM32F030K6T6TR - 48MHz Cortex-M0 32KB MCU | STMicroelectronics (Tape & Reel)
STM32F030K6T6TR

STM32F030K6T6TR - 48MHz Cortex-M0 32KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F030K6T6TR is a 32-bit Arm Cortex-M0 microcontroller operating at 48 MHz, with 32 KB of Flash memory, 4 KB of SRAM, and a 32-pin LQFP package measuring 7 x 7 mm. It operates from a 2.4 V to 3.6 V supply and combines a compact general-purpose MCU platform with timers, a 12-bit ADC, and communication interfaces. The STM32F030K6 family targets cost-sensitive embedded systems requiring reliable control, data acquisition, and serial connectivity without a high pin count. A microcontroller is a semiconductor that integrates a processor core, memory, and peripherals into one integrated circuit. In the system hierarchy, this device is a microcontroller within the semiconductor category, while its Arm Cortex-M0 core provides a compact RISC architecture for embedded control. Compared with a general-purpose processor, the STM32F030K6T6TR integrates the resources needed for real-time firmware execution, peripheral control, and low-power embedded operation on a single device. Key verified features include a 48 MHz maximum CPU frequency, 32 KB of Flash, 4 KB of SRAM, and a 12-bit ADC. The manufacturer describes the STM32F030x4, x6, x8, and xC devices as value-line Arm-based 32-bit MCUs with timers, ADC resources, communication interfaces, and 2.4 V to 3.6 V operation. The 32-LQFP package provides a practical surface-mount footprint for compact industrial and consumer equipment. The device is suitable for simple motor-control peripherals, sensor-hub controllers, compact instrument panels, communication modules, low-speed actuator controllers, and embedded measurement systems. Its 32 KB Flash and 4 KB SRAM fit moderate control loops, protocol stacks, and state machines, although applications requiring larger buffers or image storage should plan memory carefully. The 12-bit ADC supports analog measurements, while communication peripherals enable connection to sensors, displays, and external controllers. When designing a board, begin with the manufacturer datasheet for the complete pin, electrical, timing, and memory map. Provide a stable 2.4 V to 3.6 V supply, route decoupling close to the device, preserve the required reset and clock behavior, and validate unused pins according to the datasheet. Firmware compatibility and peripheral behavior must be checked against the exact STM32F030K6 variant rather than inferred from another STM32 family member. This product page combines verified distributor and manufacturer-source information with package-specific engineering guidance. It identifies the STM32F030K6T6TR as the 32 KB, 48 MHz, 32-LQFP member of the STM32F0 value-line family and separates verified specifications from parameters that require design confirmation.

USD $0.71 재고 있음
STM32F030R - Cortex-M0 48MHz MCU, 64KB Flash, 64-LQFP | ST
STM32F030R

STM32F030R - Cortex-M0 48MHz MCU, 64KB Flash, 64-LQFP | ST

The STMicroelectronics STM32F030R is a value-line ARM Cortex-M0 32-bit RISC microcontroller operating at 48 MHz, integrating up to 64 KB of Flash memory and housed in a 64-pin LQFP package. Operating from a 2.4 V to 3.6 V supply, the device delivers 38.4 DMIPS while consuming only a few milliamps in run mode, making it a leading low-power option in the entry-level STM32 family. This particular variant is the STM32F030R8T6 (64-pin LQFP, 64 KB Flash, industrial -40C to +85C), one of the most widely adopted members of the STM32F030 series. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory (Flash for code, SRAM for data), and a rich set of programmable peripherals on a single die. The Cortex-M0 is the smallest and most energy-efficient member of the ARM Cortex-M processor family, designed for cost-sensitive, deterministic embedded applications. Within the ST portfolio, the STM32F0 sits below the Cortex-M3/M4 STM32F1/F3 lines and above the 8-bit STM8, occupying the mainstream 32-bit entry point. The STM32F030 specifically targets cost-down designs that previously used 8/16-bit MCUs but now require 32-bit performance, USB-less connectivity, and ST's strong STM32 tool ecosystem (CubeMX, HAL, Standard Peripheral Library). Key features include a 12-bit 1 MSPS ADC with up to 16 channels, multiple 16-bit and 32-bit timers (including PWM, input capture, and quadrature encoder support), two I2C, two SPI (one I2S-capable), one USB 2.0 Full-Speed (device mode, on R8/C0/C8/CB parts), one CAN 2.0B (RC0/RC8 variants), and up to 55 GPIO. An integrated 8 MHz HSI RC oscillator with 1% accuracy and a 40 kHz LSI reduce external component count. The 64-LQFP package provides 64 pins at 10 mm x 10 mm body, including dedicated pins for BOOT0, NRST, OSC_IN/OSC_OUT, and full SWD debug. The architecture pairs a 3-stage pipeline Cortex-M0 core with a 32-bit AHB-Lite bus and a multi-channel DMA controller. The Nested Vectored Interrupt Controller (NVIC) handles up to 32 maskable interrupts with deterministic 16-cycle latency. A cyclic redundancy check (CRC) peripheral, two watchdogs (IWDG/WWDG), and a 7-channel DMA accelerate data movement without CPU overhead. Typical applications include consumer appliances (washing machines, induction cookers), industrial sensor hubs, USB HID peripherals, low-cost CAN nodes, smart meters, and home automation. The compact LQFP-64 footprint and 48 MHz clock headroom make it a common choice for migration paths from 8-bit PIC/AVR designs into the STM32 ecosystem. When designing with the STM32F030R, ensure each VDD/VDDA pin pair has a 100 nF decoupling capacitor placed within 2 mm of the pin, and consider the BOOT0 strap resistor for boot mode selection. The 64-LQFP package has limited thermal headroom at high ambient temperatures, so verify junction temperature under worst-case load. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, application companion parts, and practical design notes drawn from multiple sources, including the official ST datasheet, DigiKey listings, and ST community resources - not found in any single source.

USD $0.74 재고 있음