집적 회로

ATMEGA2561V-8AUR

ATMEGA2561V-8AUR - 8-bit AVR MCU 256KB Flash TQFP-64 | Microchip

The Microchip Technology ATMEGA2561V-8AUR is a high-performance, low-power 8-bit AVR RISC microcontroller with 256 KB in-system programmable Flash, 8 KB SRAM, and 4 KB EEPROM, running at up to 8 MHz in a 64-pin TQFP (14x14 mm) package supplied in tape-and-reel format. It operates over an industrial temperature range and integrates 86 general purpose I/O lines. An 8-bit microcontroller (MCU) is a self-contained computing device that integrates a processor core, program memory, data memory, and peripherals on a single chip. Within the power-management hierarchy of embedded systems, the ATmega family sits in the microcontroller IC category: MCU -> embedded processor -> integrated circuit. The AVR core uses an advanced Harvard RISC architecture with 131 instructions, most executing in a single clock cycle, and 32 general purpose working registers, delivering fully static operation and roughly 8 MIPS throughput at the 8 MHz clock limit of the V-8 speed grade. Key differentiating features include six flexible timer/counters with compare modes and PWM, four programmable serial USARTs, a master/slave SPI serial interface, a byte-oriented 2-wire serial interface (TWI/I2C), an 8-channel 10-bit ADC, a real-time counter, and a programmable watchdog timer with a separate on-chip oscillator. The device also provides an on-chip analog comparator, JTAG boundary-scan and on-chip debug, plus interrupt and wake-up on pin change for low-power designs. Architecturally, the ATmega2561 combines 256 KB of self-programmable ISP Flash (organized as 128K x 16) with a boot-loader section, enabling field firmware updates over any of the serial interfaces. The generous 8 KB SRAM and 4 KB EEPROM make it well suited to data logging, protocol handling, and parameter storage without external memory in many designs. Typical applications include industrial automation and control nodes, battery-powered instrumentation where the low-voltage V-grade supply range helps, building control panels, and multi-channel sensor acquisition systems leveraging the 8-channel 10-bit ADC and four USARTs. A key design consideration: the V suffix denotes a lower-speed (8 MHz) grade, so do not clock above 8 MHz; if 5 V and 16 MHz operation are required, select the ATMEGA2561-16AU sibling instead, which shares the same TQFP-64 footprint. This page synthesizes verified distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not consolidated in the manufacturer datasheet alone.

견적 요청 문의하기

ATMEGA2561V-8MI

ATMEGA2561V-8MI - 8-bit AVR MCU 256KB Flash 8MHz | Microchip

The Microchip Technology ATMEGA2561V-8MI is an 8-bit AVR RISC microcontroller with 256 KB ISP flash memory, 8 KB SRAM, 4 KB EEPROM, and 86 general purpose I/O lines, housed in a 64-VFQFN exposed-pad package and rated for industrial temperatures of -40C to +85C. An 8-bit AVR microcontroller is a single-chip computer built around the Harvard-architecture AVR RISC core, in which program memory and data memory are separate and all 32 general purpose working registers are directly connected to the arithmetic logic unit (ALU). Within the product hierarchy, the ATmega2561 sits in the high-pin-count, large-memory tier of the AVR ATmega family, above the ATmega128 class and one step below the 100-pin ATmega2560, making it a power management and embedded control IC for code-intensive systems. Key features include a rich instruction set of 131 powerful instructions, most of which execute in a single clock cycle, delivering throughput of up to ten times faster than conventional CISC microcontrollers at the same clock rate. The device integrates six flexible timer/counters with compare modes and PWM, four USARTs, a byte-oriented 2-wire serial interface (I2C-compatible), an SPI interface, an 8-channel 10-bit ADC, a real-time counter, and JTAG boundary scan with on-chip debugging and programming. The ATMEGA2561V-8MI belongs to the V voltage grade, operating from a 1.8V to 5.5V supply with a maximum clock frequency of 8 MHz, which allows battery-powered designs to run directly from two alkaline cells or a single lithium cell. The M suffix denotes industrial temperature range (-40C to +85C) and the I suffix indicates industrial qualification within the ordering code. Typical applications include industrial automation controllers, building control and HVAC systems, battery-operated instrumentation, and embedded gateways where four independent USART ports are used to talk to multiple peripherals simultaneously. A key design consideration is flash endurance and bootloader sizing: with 256 KB of ISP flash, allocate a 4 KB boot section if field firmware updates over USART are planned. This page synthesizes verified distributor inventory, drop-in alternatives, pricing context, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기

ATMEGA2561V-8MU

ATMEGA2561V-8MU - 8-bit AVR MCU, 256KB Flash, 8MHz | Microchip

The Microchip Technology ATMEGA2561V-8MU is an 8-bit AVR RISC microcontroller integrating 256KB (128K x 16) of in-system programmable Flash, 8KB SRAM, and 4KB EEPROM, executing instructions at up to 8 MHz while delivering up to 16 MIPS throughput, all housed in a 64-pin QFN (MU) package measuring 9x9 mm with an exposed thermal pad. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, volatile data memory, and on-chip peripherals such as timers, communication interfaces, and analog blocks. Within the embedded systems taxonomy, the ATmega2561 sits inside Microchip's high-density 8-bit AVR ATmega family: 8-bit MCU -> AVR RISC microcontroller -> embedded controller -> semiconductor IC. These devices typically act as the main control element in industrial controllers, sensor hubs, and communication nodes where deterministic real-time response is required. Key features of the ATMEGA2561V-8MU include the AVR enhanced RISC architecture with 131 powerful instructions (most executed in a single clock cycle), 32 general-purpose working registers, fully static operation, 86 general-purpose I/O lines, four programmable serial USARTs, a master/slave SPI interface, a byte-oriented 2-wire (I2C-compatible) interface, six flexible timer/counters with compare and PWM modes, an 8-channel 10-bit ADC, an on-chip analog comparator, a programmable watchdog timer with separate on-chip oscillator, and pin-change interrupt/wake-up support. The 'V' suffix designates the 1.8V to 5.5V operating voltage range, enabling battery-powered designs and energy-harvesting nodes. Technical depth: the AVR core is a fully static Harvard architecture with on-chip 2-cycle hardware multiplier, JTAG/OCD debugWIRE interfaces for in-circuit debugging, and a boot-loader section that supports self-programming via the on-chip boot code, enabling field firmware updates without an external programmer. The device integrates rich peripherals (USART x4, TWI, SPI, ADC, timers x6) without external glue logic, reducing BOM cost and PCB area in connected embedded nodes. Typical applications include industrial automation controllers requiring multiple USART links for Modbus/RS-485 segments, battery-powered data loggers that benefit from the wide 1.8V to 5.5V supply and low-power idle/power-down modes, building-automation and HVAC nodes using the six timer/counters and PWM outputs, and USB-to-UART bridges or human-machine interfaces. Design consideration: the 64-QFN (MU) land pattern differs from the TQFP-64 (AU) footprint of ATmega2560/1280 siblings, so package choice must be locked early; the exposed thermal pad must be soldered to a grounded copper pour for thermal and electrical performance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기

ATMEGA32-16AC

ATMEGA32-16AC - 8-bit AVR MCU 16MHz 32KB Flash | Microchip

The Microchip Technology ATMEGA32-16AC is a low-power 8-bit AVR RISC microcontroller delivering up to 16 MIPS throughput at 16 MHz, with 32 KB of In-System Programmable Flash, 2 KB SRAM, and 1 KB EEPROM, housed in a 44-pin TQFP (10 x 10 mm) package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals such as timers, UARTs, and ADCs into one chip. The ATmega32 belongs to the AVR family of enhanced RISC microcontrollers, positioned within the broader embedded processor hierarchy beneath 32-bit ARM MCUs, and is a classic member of the 8-bit microcontroller class used throughout industrial and consumer electronics. Key features include 131 powerful instructions with mostly single-cycle execution, 32 general-purpose working registers, an 8-channel 10-bit ADC, a JTAG interface for on-chip debugging and boundary scan, and self-programming Flash enabling boot-loader based field updates. These peripherals allow a single ATmega32 to replace multi-chip analog-and-logic designs. Architecturally, the AVR core uses a Harvard structure with separate program and data buses, so instruction fetch and data access occur in parallel. With most instructions executing in a single clock cycle, the device achieves close to 1 MIPS per MHz, letting designers run at lower clock frequencies for reduced power while maintaining throughput. Operating voltage is 4.5 V to 5.5 V, making the -16AC grade well matched to 5 V industrial logic levels. Typical applications include industrial control panels, HVAC and building automation, motor control front ends, and 5 V legacy instrumentation where the 10-bit ADC, two 8-bit timers, one 16-bit timer, USART, SPI, and TWI (I2C) interfaces cover the full sensing and communication need of a compact controller. A key design consideration is that the -16AC grade specifies operation at 4.5 V to 5.5 V; designs needing 2.7 V to 5.5 V operation should select the ATmega32L variant. Decouple VCC and AVCC separately with 100 nF capacitors placed close to the pins. This page synthesizes verified distributor data, drop-in alternatives, pinout information, and practical design notes in one place - information not consolidated in the manufacturer datasheet alone.

견적 요청 문의하기

ATMEGA32-16AQ

ATMEGA32-16AQ - 8-bit AVR MCU 16MHz 32KB Flash TQFP-44 | Microchip

The Microchip Technology ATMEGA32-16AQ is an 8-bit AVR RISC microcontroller delivering up to 16 MIPS throughput at 16 MHz, with 32KB of self-programming ISP FLASH memory, 2KB SRAM, 1KB EEPROM, and an 8-channel 10-bit ADC, housed in a 44-pin TQFP (10x10 mm) package rated for extended temperature operation. An 8-bit AVR microcontroller is a single-chip processor that integrates a RISC CPU, program memory, data memory, and peripherals such as timers, UART, SPI, and I2C on one die. AVR MCUs sit within the broader hierarchy of embedded processors: microcontroller -> 8-bit MCU family -> AVR ATmega series, positioned for cost-sensitive embedded control where simplicity, 5V tolerance, and single-cycle instruction execution matter more than raw compute throughput. Key features include the advanced RISC architecture with 131 powerful instructions, most executing in a single clock cycle, plus 32 general-purpose working registers directly connected to the ALU. The ATMEGA32-16AQ also integrates a JTAG interface for on-chip debugging and boundary-scan, read-while-write FLASH for in-system self-programming, brown-out detection, power-on reset, watchdog timer, PWM outputs, and I2C, SPI, and UART/USART connectivity. Technically, the Harvard architecture separates program and data buses, allowing instruction fetch and data access to occur simultaneously; this is what enables the 16 MIPS at 16 MHz figure. The 'A' grade suffix in the ordering code denotes the extended (automotive-adjacent) temperature range option, and the part is RoHS-green packaged. Two 8-bit and one 16-bit timer with compare modes support PWM motor control and precise waveform generation. Typical applications include industrial control panels, sensor acquisition systems using the 8-channel 10-bit ADC, and legacy embedded designs maintained for long-term production. Design consideration: this part operates at 4.5V to 5.5V for full 16 MHz speed; verify your supply rail before substituting newer 1.8V-5.5V AVR parts. This page adds distributor-sourced availability data, drop-in alternative analysis, and engineering design guidance not found in the manufacturer datasheet alone.

견적 요청 문의하기

ATMEGA32-16AQR

ATMEGA32-16AQR - 8-Bit AVR MCU 32KB 16MHz | Microchip

The Microchip Technology ATMEGA32-16AQR is an 8-bit AVR RISC microcontroller with 32 KB of self-programming Flash, 2 KB SRAM, and 1 KB EEPROM, running at up to 16 MHz and delivering up to 16 MIPS throughput, housed in a 44-pin TQFP (10x10 mm) package with an extended temperature range of -40C to +85C. An AVR microcontroller is a Harvard-architecture 8-bit RISC device that executes most instructions in a single clock cycle from on-chip Flash memory. Within the product taxonomy, the ATmega32 sits under AVR 8-bit MCUs, which belong to the broader microcontroller family, itself a subset of embedded processors and integrated circuits. The ATmega32 family is one of the most widely deployed 8-bit MCU platforms in industrial, consumer, and educational designs because of its 5V operation, rich peripheral set, and mature toolchain. Key features include 32 KB ISP Flash with read-while-write capability, 1 KB EEPROM for non-volatile parameter storage, 2 KB SRAM, 32 general-purpose working registers, 54 general-purpose I/O lines in the TQFP-44 package, an 8-channel 10-bit ADC, a JTAG interface for on-chip debug and boundary scan, and two USARTs. The device supports self-programming via a boot loader, enabling field firmware updates without an external programmer. The ATmega32 uses Microchip's low-power AVR 8-bit RISC core with 131 powerful instructions, most executing in a single clock cycle. The 16 MHz maximum clock yields 16 MIPS, and the 5V operating range provides strong noise immunity for industrial environments. The -16AQR suffix denotes 16 MHz, TQFP package, extended temperature range, Green/RoHS-compliant construction, and tape-and-reel packaging. Typical applications include industrial control panels, motor control, battery chargers, home automation nodes, data loggers, and educational embedded platforms. The 5V I/O and 10-bit ADC make it well suited to direct sensor interfacing without level shifting. When designing with this device, decouple every VCC pin with a 100 nF ceramic capacitor placed close to the pin, and provide a clean analog supply for AVCC when using the ADC. Note that Microchip recommends the newer ATmega32A for new designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection and second-sourcing.

견적 요청 문의하기

ATMEGA32-16AUR

ATMEGA32-16AUR - 8-Bit AVR MCU 32KB Flash 16MHz | Microchip

The Microchip Technology ATMEGA32-16AUR is an 8-bit AVR RISC microcontroller with 32 KB of in-system programmable flash, 2 KB SRAM, and 1 KB EEPROM, running at up to 16 MHz from a 4.5 V to 5.5 V supply in a 44-pin TQFP (10x10 mm) package. It is the tape-and-reel, industrial-temperature variant of the classic ATmega32 and delivers 16 MIPS throughput at 16 MHz. An AVR microcontroller is a Harvard-architecture 8-bit RISC device that executes most instructions in a single clock cycle from on-chip flash memory. Within the product hierarchy, the ATmega32 sits under 8-bit AVR microcontrollers, which belong to the broader microcontroller (MCU) family, itself a subset of embedded processing ICs. The ATmega32 integrates 32 general-purpose working registers, 54/69 general-purpose I/O lines, an 8-channel 10-bit ADC, and a JTAG interface for on-chip debug and boundary scan. Key differentiators include 32 KB ISP flash with read-while-write capability, 1 KB EEPROM for non-volatile parameter storage, 2 KB SRAM, and a rich peripheral set: two 8-bit timers, one 16-bit timer, four PWM channels, USART, SPI, and TWI (I2C) serial interfaces, plus an analog comparator and programmable watchdog. The 16 MHz maximum clock yields 16 MIPS, and the 4.5-5.5 V operating range makes the device directly compatible with legacy 5 V logic. The device uses Atmel/Microchip's low-power CMOS process and supports six sleep modes, including Idle, Power-save, and Power-down, drawing under 1 uA in Power-down at 5 V. In-system programming via SPI or JTAG allows field firmware updates without removing the MCU from the board. Typical applications include industrial control panels, motor control, battery chargers, home automation nodes, and legacy 5 V embedded designs migrating from AT89C51-class parts. The 44-pin TQFP footprint is shared with the ATmega16 and ATmega32A families, enabling straightforward migration. When designing with the ATMEGA32-16AUR, decouple every VCC pin with 100 nF ceramic capacitors placed within a few millimeters of the pin, and use a 10 uF bulk capacitor on the main rail. The AREF pin requires a low-impedance reference source for ADC accuracy. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for procurement and layout decisions.

견적 요청 문의하기

ATMEGA32-16MJ

ATMEGA32-16MJ - 8-bit AVR MCU 16MHz 32KB Flash | Microchip

The Microchip Technology ATMEGA32-16MJ is an 8-bit AVR RISC microcontroller delivering up to 16 MIPS throughput at 16 MHz, with 32 KB of self-programming ISP flash, 2 KB SRAM, 1 KB EEPROM, and an 8-channel 10-bit ADC, housed in a 44-pin VQFN (7x7 mm) package for industrial temperature applications. An 8-bit AVR microcontroller is a Harvard-architecture processor that executes most of its 131 powerful instructions in a single clock cycle. Within the power-management hierarchy, the ATmega family sits as a general-purpose embedded controller: microcontroller IC -> AVR 8-bit MCU family -> ATmega32 device, bridging simple timers up to complete system-on-chip control for industrial and consumer products. Key features include 32 KB of in-system-programmable flash with read-while-write capability, a JTAG interface for boundary-scan, on-chip debugging, and programming, three flexible timer/counters, and 32 general-purpose I/O lines backed by 32 general-purpose working registers. The 10-bit ADC resolves input signals across eight multiplexed channels for sensor interfaces. The advanced RISC architecture pairs a single-cycle ALU with fast register access, so effective code density and interrupt latency are predictable. Self-programming flash allows firmware updates in the field through a bootloader without an external programmer. Typical applications include industrial control panels, embedded sensor nodes using the 8-channel ADC, and legacy AVR designs maintained under the MightyCore ecosystem for Arduino-compatible tooling. Design consideration: at 16 MHz operation the supply range is 4.5 V to 5.5 V; always verify flash erase/write cycles against datasheet limits when enabling self-programming. This page synthesizes distributor listings, drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기

ATMEGA32-16PC

ATMEGA32-16PC - 8-Bit AVR MCU 16MHz 32KB Flash DIP-40 | Microchip

The Microchip Technology (Atmel) ATMEGA32-16PC is a low-power 8-bit AVR microcontroller based on the enhanced RISC architecture, executing up to 16 MIPS at 16 MHz, with 32KB of In-System Programmable Flash, 2KB SRAM, 1KB EEPROM, an 8-channel 10-bit ADC, and a 40-pin PDIP (0.600 inch, 15.24 mm) through-hole package. An 8-bit microcontroller is a single-chip computer that integrates a CPU core, program memory, data memory, and peripherals such as timers, communication interfaces, and analog-to-digital converters. The AVR family popularized single-cycle RISC execution, and this part sits in the classic ATmega tier above the smaller ATmega8/ATmega16 devices and below the ATmega64/ATmega128 family in the general-purpose microcontroller hierarchy. Key features include 131 powerful instructions, most executing in a single clock cycle, 32 general-purpose working registers, and up to 16 MIPS throughput at 16 MHz. The ATMEGA32-16PC provides 32 programmable I/O lines, a JTAG interface for on-chip debugging, and hardware connectivity through I2C (TWI), SPI, and UART/USART interfaces, enabling versatile system integration. Technically, the device uses the AVR Harvard architecture with separate program and data buses for parallel instruction fetch and execution. The self-programming Flash allows boot-loader firmware updates in the field, while the 10-bit ADC with 8 multiplexed channels supports direct analog sensor acquisition. Power management features include idle and power-down sleep modes suited to battery-operated designs. Typical applications include education and prototyping (the DIP-40 package is breadboard-friendly), industrial control panels, sensor nodes, and embedded instrumentation requiring 5V logic levels and straightforward in-system programming. Designers should note the DIP-40 0.600-inch footprint is pin-compatible across the ATmega32 DIP family, so PCBs can accept speed or temperature-grade variants without layout changes. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기

ATMEGA32-16PI

ATMEGA32-16PI - 16MHz 8-bit AVR MCU 32KB Flash DIP-40 | Microchip

The Microchip ATMEGA32-16PI is an 8-bit AVR RISC microcontroller with 32KB of In-System Programmable Flash, 2KB of SRAM, and 1KB of EEPROM, operating at up to 16 MHz for 16 MIPS throughput in a 40-pin PDIP (DIP-40) through-hole package. An 8-bit AVR microcontroller is a self-contained computing device that integrates a processor core, program memory, data memory, and peripherals such as timers, ADCs, and communication interfaces on a single chip. Within the power management and embedded system hierarchy, an MCU sits at the heart of any embedded design, executing user firmware to control sensors, actuators, displays, and communication links. The AVR family, originally developed by Atmel and now manufactured by Microchip Technology, uses an enhanced RISC architecture executing most instructions in a single clock cycle. Key features of the ATMEGA32-16PI include 131 powerful instructions with mostly single-cycle execution, eight general-purpose 8-bit working registers, 32 general-purpose I/O lines, an 8-channel 10-bit ADC, a JTAG interface for on-chip debugging, and a 32KB self-programming Flash program memory. It operates from a 4.5V to 5.5V supply (industrial temperature range -40C to +85C, indicated by the I suffix) and delivers up to 16 MIPS at 16 MHz. Technically, the AVR core is a Harvard-architecture RISC processor with separate program and data buses, allowing one instruction fetch and one data access per cycle. The self-programming Flash enables bootloader firmware updates in the field, while the JTAG boundary-scan and on-chip-debug capability accelerates development. Peripheral set includes two 8-bit timers, one 16-bit timer, PWM channels, USART, SPI, and two-wire (I2C) serial interfaces. Typical applications include industrial control and automation, educational and prototyping platforms (the DIP-40 package fits breadboards and DIP sockets directly), motor control, consumer appliances, and legacy design maintenance where a 5V through-hole MCU is required. Design consideration: the ADC reference and analog supply require AVCC tied to VCC through a low-pass filter for accurate 10-bit conversions; keep decoupling capacitors close to the VCC/GND pins and never leave the RESET pin floating. This page synthesizes distributor pricing, drop-in alternatives, practical design notes, and FAQ content not found on a single manufacturer or distributor page, providing an information gain for engineers and buyers.

견적 요청 문의하기

ATMEGA32-16PJ

ATMEGA32-16PJ - 8-Bit AVR MCU, 16MHz, 32KB Flash DIP-40 | Microchip

The Microchip Technology ATMEGA32-16PJ is a high-performance, low-power 8-bit AVR ATmega microcontroller with 32KB of self-programming Flash program memory, 2KB of SRAM, 1KB of EEPROM, and up to 16 MIPS throughput at a maximum clock frequency of 16 MHz, housed in a 40-pin PDIP (0.600 in / 15.24 mm) through-hole package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and configurable peripherals into one chip, forming the lowest layer of the embedded-system hierarchy: microcontroller unit -> embedded processor -> computing system. The AVR ATmega family uses an advanced RISC architecture in which 131 powerful instructions, most executed in a single clock cycle, work together with 32 general-purpose 8-bit registers to deliver deterministic, single-cycle execution that simplifies real-time firmware design. Key features of the ATMEGA32-16PJ include the 32KB (16K x 16) in-system programmable Flash with self-programming capability for bootloader updates, an 8-channel 10-bit ADC for analog sensing, I2C (TWI), SPI, and UART/USART serial interfaces for connectivity, and a JTAG interface for on-chip debugging and boundary-scan testing. Four flexible PWM/timer channels (two 8-bit and one 16-bit timers with output compare) support motor control and LED dimming tasks. Architecturally, the AVR core pairs the RISC instruction set with a Harvard memory structure that separates Flash program memory from SRAM data paths, allowing instruction fetch and data access to overlap in a pipelined two-stage scheme. The self-programming Flash enables field firmware upgrades, while the 1KB EEPROM retains calibration data through power cycles; in-system programming via SPI removes the need for a dedicated programmer socket. Typical applications include university and maker prototyping on solderless breadboards (the DIP-40 footprint is the primary reason this package remains popular for education), industrial control panels and sensor nodes that need 5V noise immunity, and legacy equipment maintenance where an easily socketed, hand-solderable MCU simplifies board-level replacement. Design consideration: the ATMEGA32-16PJ is rated for a 4.5V to 5.5V supply at the 16 MHz speed grade; running the same silicon from 3.3V requires dropping to the slower ATmega32L speed class or reducing the clock below the f_MAX curve for the applied voltage. This page synthesizes verified distributor stock and pricing data, same-package drop-in alternatives, a complete DIP-40 pinout, and practical design notes not found together on the manufacturer datasheet, giving engineers a single citable reference for the ATMEGA32-16PJ.

견적 요청 문의하기

ATMEGA32-16PU

ATMEGA32-16PU - 8-bit AVR MCU 16MHz 32KB Flash | Microchip

The Microchip Technology ATMEGA32-16PU is a high-performance, low-power 8-bit AVR RISC microcontroller delivering 16 MIPS at 16 MHz, with 32KB of In-System Programmable FLASH, 1KB EEPROM, 2KB SRAM, and 32 general purpose I/O lines, housed in a 40-pin PDIP (40-PDIP) through-hole package operating from 4.5V to 5.5V. An 8-bit AVR microcontroller is a single-chip computer built around the AVR advanced RISC architecture, in which a rich register file of 32 general purpose working registers is directly connected to the ALU so most instructions execute in a single clock cycle. Within the product hierarchy, it sits as an embedded MCU inside the broader families of microcontrollers, integrated circuits, and semiconductors, providing computation, memory, and peripherals in one package. Key features include 131 powerful instructions with mostly single-cycle execution, an 8-channel 10-bit ADC for analog sensing, a JTAG interface for on-chip debugging and boundary-scan, and read-while-write ISP FLASH that allows firmware updates in the field without removing the chip. Four flexible timer/counters with PWM outputs, a USART for serial communication, an SPI interface, and a two-wire (I2C-compatible) interface round out the peripheral set. Architecturally, the Harvard-structured AVR core fetches instructions and data over separate buses, achieving one MIPS per MHz of clock. The 32KB FLASH is organized as 16K x 16 bits and rated for in-system reprogramming, while lock bits protect the codebase. An on-chip RC oscillator allows clockless-board designs, or an external crystal up to 16 MHz can be used for maximum throughput. Typical applications include university and vocational training labs, breadboard prototyping, industrial control panels, and legacy 5V embedded systems where through-hole mounting simplifies assembly and repair. The 4.5V to 5.5V supply range makes it a natural fit for 5V logic environments. For design, remember that the PDIP package has higher thermal resistance than TQFP variants, and the ADC reference should use AVCC with proper filtering for accurate conversions. The device is socket-friendly, so field firmware updates via ISP are trivial. This page adds value beyond the datasheet by synthesizing distributor pricing tiers, drop-in replacement options such as ATMEGA32A-PU, and practical design notes for prototyping and production planning.

견적 요청 문의하기

ATMEGA3208-AF

ATMEGA3208-AF - 8-bit AVR MCU 32KB 20MHz TQFP-32 | Microchip

The Microchip Technology ATMEGA3208-AF is an 8-bit megaAVR 0-series microcontroller with a hardware multiplier AVR core running at up to 20 MHz, 32 KB of Flash memory (16K x 16), 4 KB of SRAM, and 256 bytes of EEPROM, housed in a 32-pin TQFP (7 x 7 mm) package with Functional Safety (FuSa) support. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals into one chip, forming the lowest tier of the embedded computing hierarchy: MCU -> embedded processor -> system-on-chip -> full computer system. The megaAVR 0-series sits within the AVR family of 8-bit RISC architectures originally developed by Atmel and now manufactured by Microchip Technology. Key features of the ATMEGA3208-AF include a 20 MHz maximum clock frequency, 32 KB in-system self-programmable Flash with the latest AVR instruction set, and an extended feature set that includes event system, configurable custom logic (CCL), and 12-bit ADC peripherals typical of the megaAVR 0-series. The AF suffix denotes the TQFP-32 package option with FuSa qualification support, targeting safety-oriented industrial designs. Technically, the AVR core executes most instructions in a single clock cycle and includes a hardware multiplier, delivering efficient arithmetic throughput for 8-bit applications. Memory organization provides 16K x 16 words of Flash for code, 4 KB of SRAM for variables, and 256 bytes of EEPROM for non-volatile calibration data. Typical applications include industrial control and automation, functional-safety-oriented monitoring systems, consumer appliances, and motor control or sensing nodes where 20 MHz 8-bit performance with 32 KB program memory is sufficient. Design consideration: the core may run at reduced clock speeds at the low end of the supply voltage range (around 2.7 V at 8 MHz per distributor data), so verify clock-versus-voltage margins before finalizing the power architecture. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기

ATMEGA3208-AFR

ATMEGA3208-AFR - 8-bit AVR MCU 32KB 20MHz TQFP-32 | Microchip

The Microchip Technology ATMEGA3208-AFR is an 8-bit megaAVR 0-series microcontroller with a hardware multiplier, running at up to 20 MHz and integrating 32 KB of Flash memory, 4 KB of SRAM and 256 bytes of EEPROM in a 32-pin TQFP (7x7 mm) package, supplied in tape-and-reel packaging with an operating temperature range of -40C to +105C. A microcontroller (MCU) is a single-chip embedded computer that combines a processor core, memory, and peripherals on one die. The megaAVR 0-series sits in Microchip's 8-bit AVR hierarchy - processor -> AVR core -> megaAVR family -> megaAVR 0-series - positioned between cost-optimized tinyAVR parts and performance-oriented ATmega4809-class devices, targeting embedded control in industrial, consumer and automotive-adjacent systems. Key features include the modern AVR CPU with a two-stage pipeline and single-cycle hardware multiplier, up to 20 MHz operation from an internal or external clock, and rich analog integration. Peripherals include USARTs, SPI and TWI (I2C) serial interfaces, a 10-bit ADC with up to 10 channels, 10-bit DAC, analog comparators, and configurable custom logic peripheral (CCL). Core-independent peripherals driven by the event system reduce CPU load and interrupt latency in real-time designs. Technical depth: the megaAVR 0-series uses the latest AVR core with a 3-stage pipeline, executing most instructions in a single cycle. MVIO (multi-voltage I/O) on select pins allows the I/O bank to run at a lower voltage than VDD, simplifying mixed-voltage designs. The configurable custom logic peripheral enables glue-logic replacement, and the event system routes peripheral signals without CPU intervention. Program and debug occur over the single-wire UPDI interface, freeing pins otherwise used by JTAG or ICSP. Typical applications include industrial control and sensor nodes, building automation and HVAC control, consumer appliances, and motor control辅助 circuits where the hardware multiplier and 10-bit ADC support scalar motor algorithms and analog sensing. Design consideration: budget Flash and SRAM carefully - 32 KB Flash with no external expansion means bootloader space (optional unified bootloader) must be reserved at link time, and 4 KB SRAM is the hard ceiling for stack plus heap. This page synthesizes distributor pricing, same-family drop-in alternatives, pinout data, and practical design notes not found in a single manufacturer datasheet view.

견적 요청 문의하기

ATMEGA3208-AU

ATMEGA3208-AU - 8-bit AVR MCU 32KB 20MHz TQFP-32 | Microchip

The Microchip Technology ATMEGA3208-AU is an 8-bit AVR RISC microcontroller running at up to 20 MHz, with 32 KB Flash, 4 KB SRAM, and 256 bytes of EEPROM, housed in a 32-pin TQFP (7x7 mm) surface-mount package. A microcontroller is a single-chip embedded computer that integrates a processor core, program memory, data memory, and peripherals on one die. The ATMEGA3208-AU belongs to the megaAVR 0-series, Microchip's modernized AVR family that succeeded the classic ATmega328-class parts; within the taxonomy it sits in the hierarchy: MCU -> 8-bit microcontroller -> AVR microcontroller -> megaAVR 0-series -> ATmega3208. Key features include a 2-stage pipeline AVR core with hardware multiplier executing most instructions in a single cycle, 10-bit ADC with up to 12 external channels, three USARTs, one SPI and one I2C (TWI) interface, and event system peripherals for inter-peripheral signaling without CPU intervention. The part supports operation from 1.8V to 5.5V, with 1.8V operation allowed up to 5 MHz per Microchip documentation, enabling both low-power and 5V industrial designs. Technically, the megaAVR 0-series introduces a peripheral event system, configurable custom logic (CCL), and improved ADC with accumulative sampling. Flash self-programming supports bootloader firmware updates, and 256 bytes of EEPROM retain calibration or user data through power cycles. Typical applications include industrial control, IoT end nodes, motor control, metering, and low-power embedded automation boards. Community firmware support exists via the MegaCoreX Arduino hardware package covering ATmega4809/4808/3209/3208/1609/1608/809/808. Design consideration: obey the frequency-versus-voltage derating curve - at 3.3V the safe maximum clock is lower than 20 MHz, so verify the datasheet graph before selecting the crystal. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기

ATMEGA3208-AUR

ATMEGA3208-AUR - 8-bit AVR MCU 20MHz 32KB Flash | Microchip

The Microchip Technology ATMEGA3208-AUR is an 8-bit megaAVR 0-series microcontroller with an AVR RISC processor and hardware multiplier, running at up to 20 MHz with 32 KB Flash, 4 KB SRAM, and 256 bytes of EEPROM, housed in a 32-pin TQFP (7x7 mm) package supplied in tape and reel. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals such as timers, communication interfaces, and analog-to-digital converters on one chip. The megaAVR 0-series sits within Microchip's AVR family hierarchy - AVR MCU -> megaAVR -> 0-series - positioned for cost-sensitive embedded control designs that need more performance than classic AVRs without moving to 32-bit cores. Key features include a 20 MHz maximum clock frequency, 32 KB of self-programmable Flash memory organized as 16K x 16, 4 KB of SRAM for data and stack, and 256 bytes of EEPROM for non-volatile parameter storage. The device operates from a 3.3 V or 5 V supply, easing migration from legacy 5 V systems. The series also carries Functional Safety (FuSa) documentation support, valuable for IEC 61508-style industrial projects. Technically, the AVR core executes most instructions in a single clock cycle thanks to its Harvard-architecture RISC pipeline, and the integrated hardware multiplier accelerates math-intensive code. The 0-series peripherals - including multi-slice timers, USARTs, SPI, TWI (I2C), and an ADC with internal reference - are controlled through a unified Peripheral Part Access Controller (PPAC-style register map) that is consistent across the family, simplifying code reuse when scaling between 8 KB and 48 KB Flash devices in the same package footprint. Typical applications include industrial control and automation nodes, home appliances and HVAC boards, and hobby/education platforms - the megaAVR 0-series is supported by the MegaCoreX Arduino hardware package for ATmega3208 and its family members. Design consideration: choose decoupling capacitors close to each VDD pin on the 7x7 TQFP and verify Brown-Out Reset settings in fuse configuration, since Flash self-programming during runtime requires stable supply margins. This page synthesizes distributor pricing, drop-in alternatives within the megaAVR 0-series, and practical design notes not consolidated in the manufacturer datasheet. Pricing shown as of 2026-09-17.

견적 요청 문의하기

ATMEGA3208-MF

ATMEGA3208-MF - 8-bit AVR MCU 20MHz 32KB Flash VQFN-32 | Microchip

The Microchip Technology ATMEGA3208-MF is an 8-bit megaAVR 0-series microcontroller with an AVR processor with hardware multiplier, running at up to 20 MHz, featuring 32 KB (16K x 16) Flash, 4 KB SRAM, and 256 bytes of EEPROM, housed in a 32-pin VQFN (5x5 mm) package. An 8-bit microcontroller (MCU) is an integrated circuit that contains a processor core, memory, and programmable input/output peripherals on a single chip, sitting within the broader hierarchy of semiconductor devices: AVR core -> 8-bit MCU -> microcontroller unit -> embedded processor. The megaAVR 0-series is Microchip's core-independent peripheral generation of the classic AVR architecture, using the latest AVR CPU with a two-stage pipeline and single-cycle I/O access. Key features include the 20 MHz maximum clock frequency with an internal oscillator option, 32 KB in-system self-programmable Flash memory, 4 KB of SRAM for data and stack, 256 bytes of EEPROM for non-volatile parameter storage, and Functional Safety (FuSa) support as noted in distributor listings. The device integrates peripherals typical of the megaAVR 0-series, including multi-channel timers, USARTs, SPI, TWI (I2C), an ADC, analog comparators, and configurable custom logic cells. Technically, the AVR core executes most instructions in a single clock cycle and includes a hardware multiplier, delivering efficient MIPS-per-MHz performance. Memory is organized in a unified address space with single-cycle SRAM access, and the peripheral set operates independently of the core clock where supported, reducing CPU overhead in real-time designs. Typical applications include industrial control and automation, consumer appliances, IoT sensor nodes, and motor control or power-management boards where a compact 5x5 mm QFN footprint and moderate Flash density are required. A key design consideration is the single-supply operating range and the use of the UPDI (Unified Program and Debug Interface) single-pin programming interface, which simplifies in-circuit programming but requires a compatible programmer such as the PICkit 4 or Atmel-ICE. This page synthesizes distributor pricing, drop-in alternatives within the megaAVR 0-series, and practical design notes not consolidated in the manufacturer datasheet. Pricing data referenced as of 2026-09-17.

견적 요청 문의하기

ATMEGA3208-MFR

ATMEGA3208-MFR - 8-bit AVR MCU 20MHz 32KB Flash QFN-32 | Microchip

The Microchip Technology ATMEGA3208-MFR is an 8-bit AVR megaAVR 0-series microcontroller with a hardware multiplier, running at up to 20 MHz, with 32 KB (16K x 16) FLASH, 4 KB SRAM, and 256 bytes of EEPROM, housed in a 32-pin VFQFN (5x5 mm) package. The -MFR suffix denotes the Functional Safety (FuSa) variant of this part, supporting safety-oriented embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals such as timers, communication interfaces, and analog blocks. The megaAVR 0-series sits within Microchip's 8-bit AVR family, occupying the role of a general-purpose, mid-density MCU for cost-sensitive embedded control in the wider power-management and system-control hierarchy. Key features include the AVR RISC core with hardware multiplier for efficient arithmetic, up to 20 MHz CPU clock, 32 KB self-programmable Flash for firmware, 4 KB SRAM for runtime data, and 256 bytes of EEPROM for non-volatile parameter storage. The device is offered in 28- and 32-pin packages, giving designers footprint flexibility; this listing is the 32-VFQFN 5x5 mm variant. The megaAVR 0-series architecture uses the latest AVR core with single-cycle I/O access, event system interconnects between peripherals, and modern peripherals shared across the 0-series family (ATmega3208/3209/4808/4809). Code portability within the family is high, and the MegaCoreX community Arduino package provides support for the ATmega3208 alongside the ATmega4809/3209/1609/809 family members, easing prototyping and firmware reuse. Typical applications include industrial automation and control nodes, functional-safety-oriented consumer and industrial subsystems, home appliances, lighting control, and sensor interfacing where an 8-bit MCU with hardware multiply and adequate Flash/SRAM reduces external component count. A key design consideration is supply and clock configuration: verify the exact operating voltage range, temperature grade, and peripheral set against the official ATmega3208/3209 data sheet (DS40002174) before finalizing the power tree and clock tree, as this page only restates parameters confirmed in verified distributor data. This page synthesizes distributor listings (DigiKey, Mouser), manufacturer product information, drop-in family alternatives, and practical design notes not found in a single datasheet, providing consolidated sourcing and engineering context in one place.

견적 요청 문의하기

ATMEGA3208-MUR

ATMEGA3208-MUR - 8-bit AVR MCU 20MHz 32KB QFN-32 | Microchip

The Microchip Technology ATMEGA3208-MUR is an 8-bit AVR megaAVR 0-series microcontroller with a hardware multiplier, running at up to 20 MHz and integrating 32 KB of Flash memory (16K x 16), 4 KB of SRAM, and 256 bytes of EEPROM in a 32-pin VQFN (5x5 mm) package with exposed pad. An 8-bit AVR microcontroller is a single-chip computer built around the Harvard-architecture AVR RISC core, executing most instructions in a single clock cycle. Within the power-management IC hierarchy, it sits as the complete embedded processing element of a system, combining CPU, memory, and peripherals such as USARTs, SPI, TWI (I2C), timers, an ADC, and analog comparators on one die. Key features include the 20 MHz maximum clock frequency, 32 KB in-system-programmable Flash with optional boot section, a 10-bit ADC, and Functional Safety (FuSa) support per DigiKey categorization, making the family suitable for IEC 61508-oriented designs. The megaAVR 0-series also brings event system inter-peripheral signaling and a configurable custom logic peripheral (CCL). Technically, the ATmega3208 uses the latest AVR core with a two-stage pipeline and hardware multiplier, delivering efficient C code execution. Microchip MegaAVR Studio and MPLAB X IDE with MCC (MPLAB Code Configurator) support code generation and debugging via the UPDI single-pin interface on PA0, reducing debug pin count versus legacy JTAG parts. Typical applications include industrial control and automation nodes, motor control auxiliaries, consumer appliances, and IoT sensor endpoints that need 5V-tolerant robust I/O and rich serial connectivity in a compact 5x5 mm footprint. A key design consideration is supply voltage: this is a 5V-class MCU (up to 5.5 V per the 0-series family), so ensure level shifting when interfacing 3.3V peripherals, and place 100 nF decoupling capacitors on every VDD/GND pin pair. This page synthesizes distributor pricing, drop-in family alternatives, pinout, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-17.

견적 요청 문의하기

ATMEGA3208-XF

ATMEGA3208-XF - 20MHz 8-bit AVR MCU 32KB Flash | Microchip

The Microchip ATMEGA3208-XF is an 8-bit megaAVR 0-series microcontroller with a hardware multiplier, running at up to 20 MHz and integrating 32 KB of Flash memory, 4 KB of SRAM, and 256 bytes of EEPROM in a 28-SSOP surface-mount package. An 8-bit AVR microcontroller is a single-chip computer that executes RISC instructions from on-chip Flash memory while integrating SRAM, EEPROM, and peripheral functions such as timers, USARTs, and analog-to-digital converters. Within the system hierarchy, it belongs to the megaAVR 0 series family, the AVR MCU product line, and the broader microcontroller and embedded processor category used across consumer, industrial, and automotive-adjacent designs. Key features of the ATMEGA3208-XF include the 20 MHz AVR core with a single-cycle hardware multiplier for efficient math-intensive tasks, 32 KB (16K x 16) of self-programmable Flash for field firmware updates, and a rich peripheral set typical of the megaAVR 0 series, including multiple 16-bit timers, USARTs, and a 10-bit ADC. The Functional Safety (FuSa) qualification noted by distributors makes it suitable for safety-conscious system architectures. The megaAVR 0 series architecture uses the latest AVR core with a two-stage pipeline, executing most instructions in a single clock cycle to deliver up to 20 MIPS at 20 MHz. The unified address space and C-friendly memory model simplify firmware development, while MegaCoreX provides Arduino IDE support for rapid prototyping on the ATmega3208 and its family members (ATmega4808, ATmega1608, ATmega808). Typical applications include industrial control and automation nodes, consumer appliance controllers, and embedded sensing systems where 32 KB of code space and 4 KB of RAM are sufficient. The 28-pin package balances I/O count against board area for cost-sensitive designs. When designing with this MCU, reserve the UPDI pin for single-wire programming and debugging, and verify the 28-SSOP footprint against your PCB land pattern before committing to the layout, since pin-compatible family members must share the same footprint for reuse. This page synthesizes distributor pricing context, drop-in family alternatives, application guidance, and design notes not consolidated in the manufacturer datasheet, giving engineers a single decision-ready reference.

견적 요청 문의하기

ATMEGA3208-XFR

ATMEGA3208-XFR - 8-bit AVR MCU 20MHz 32KB Flash | Microchip

The Microchip Technology ATMEGA3208-XFR is an 8-bit megaAVR 0 series microcontroller with a hardware multiplier, running at up to 20 MHz with 32 KB Flash, 4 KB SRAM and 256 bytes of EEPROM in a 28-pin SSOP package rated for -40C to +125C industrial operation and supplied on Tape & Reel. An 8-bit AVR microcontroller is a single-chip computer that integrates a RISC processor core, program Flash, data SRAM, EEPROM, and peripherals such as UARTs, SPI, I2C (TWI), timers, and an ADC on one die. Within the power-management hierarchy of embedded systems, the MCU sits at the top level of control, orchestrating sensors, actuators, and communication links. The AVR architecture, originally developed by Atmel and now part of Microchip Technology, executes most instructions in a single clock cycle. Key features of the ATMEGA3208-XFR include the 20 MHz maximum clock frequency for deterministic real-time response, the 32 KB (16K x 16) self-programmable Flash for firmware headroom, and the megaAVR 0 series peripheral set with event system, configurable custom logic (CCL), and functional-safety (FuSa) support documentation. The XFR suffix denotes the 28-SSOP (5.30 mm width) package, industrial 125C temperature grade, Green/RoHS-compliant finish, and Tape & Reel packing for automated assembly. Technically, the AVR core pairs a two-stage pipeline with a hardware multiplier, enabling efficient 8-bit and 16-bit arithmetic, while the peripheral ring and event system allow peripherals to communicate without CPU intervention, reducing latency and power. Single-cycle I/O register access keeps bit-banged protocols fast and predictable. Typical applications include industrial sensor nodes and factory automation, home-appliance and HVAC control boards, and low-cost motor control or power-supply supervision, where 20 MHz performance and 32 KB Flash cover most 8-bit workloads. A key design consideration is supply decoupling: place 100 nF ceramic capacitors directly at the VDD pin and use the internal brown-out detector for reliable reset behavior across the 1.8 V to 5.5 V supply range. This page synthesizes distributor availability, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기

ATMEGA3208-XU

ATMEGA3208-XU - 8-bit AVR MCU 20MHz 32KB Flash | Microchip

The Microchip Technology ATMEGA3208-XU is an 8-bit megaAVR 0-series microcontroller featuring the AVR processor with hardware multiplier, running at up to 20 MHz, with 32 KB Flash, 4 KB SRAM and 256 bytes of EEPROM, housed in a 28-pin SSOP (X) package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and programmable peripherals into one chip, forming the lowest layer of the embedded systems hierarchy: MCU -> embedded processor -> computing system. The megaAVR 0-series is Microchip's latest generation of 8-bit AVR devices, built around a modified Harvard architecture core executing most instructions in a single clock cycle. Key features of the ATMEGA3208 include its 20 MHz maximum clock frequency, 32 KB (16K x 16) Flash program memory, 4 KB SRAM, and 256 bytes of EEPROM for non-volatile data storage. Connectivity is comprehensive for an 8-bit device: I2C (TWI), SPI, and three USART interfaces. The series introduces Core Independent Peripherals (CIPs), including an Event System that routes signals between peripherals without CPU intervention, plus intelligent analog blocks such as a 10-bit ADC. From a technical perspective, the AVR core with hardware multiplier delivers efficient 8-bit math performance, and the latest C-compiler-friendly architecture means code written in modern C runs efficiently without hand-tuned assembly. The device also carries Functional Safety (FuSa) documentation support per DigiKey's categorization, easing compliance work in safety-oriented designs. Low-power features across the megaAVR 0-series support sleep modes suitable for battery-conscious applications. Typical applications include industrial control and automation nodes, consumer appliances, and general-purpose embedded control where a 28-pin footprint, 20 MHz performance, and multiple USARTs are required. The three USART ports make it a strong fit for multi-protocol serial bridging. A key design consideration: the -XU suffix indicates the 28-lead SSOP package with industrial temperature range; if your board uses a 32-pin TQFP or QFN footprint, select the -AU or -MU variants instead, as packages are not interchangeable without PCB rework. This page synthesizes distributor pricing, drop-in alternatives within the megaAVR 0-series, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기

ATMEGA3208-XUR

ATMEGA3208-XUR - 8-bit AVR MCU 20MHz 32KB Flash 28-SSOP | Microchip

The Microchip Technology ATMEGA3208-XUR is an 8-bit megaAVR 0-series microcontroller with a hardware multiplier running at up to 20 MHz, offering 32 KB Flash, 4 KB SRAM, and 256 bytes of EEPROM in a 28-pin SSOP (SOIC-width) surface-mount package. It is a Functional Safety (FuSa) qualified device per DigiKey classification, supporting safety-oriented industrial designs. An 8-bit microcontroller (MCU) integrates a processor core, program memory, data memory, and peripherals onto a single chip, forming the lowest tier of the embedded control hierarchy: MCU -> embedded processor -> system-on-chip. The megaAVR 0-series belongs to Microchip's AVR family, widely used in industrial automation, home appliances, and IoT sensor nodes where deterministic 8-bit control is preferred over more complex 32-bit cores. Key features include the AVR RISC core with single-cycle instruction execution and a hardware multiplier, up to 20 MHz clock operation, Core Independent Peripherals (CIPs), and an Event System that routes peripheral signals without CPU intervention. The device supports multiple sleep modes and a peripheral clock gating scheme for low-power battery-operated designs. Intelligent analog peripherals include a 10-bit ADC and analog comparators, reducing external component count. The megaAVR 0-series architecture separates data and program buses for faster instruction throughput, and the unified peripheral architecture means firmware knowledge scales across Flash sizes from 8 KB to 48 KB within the family (ATmega808/1608/3208/4808 and the 40/48-pin 3209/4809 variants). The 28-pin SSOP package exposes up to 22 general-purpose I/O lines with configurable pull-ups and drive strength. Typical applications include industrial control panels, motor control subsystems, consumer appliances, capacitive-touch user interfaces, and sensor nodes in IoT networks. The XUR suffix denotes the industrial temperature grade (-40C to +105C operating range) in tape-and-reel packaging. Design consideration: the SSOP-28 footprint differs from the 32-pin TQFP of the ATmega3209; select the -XU SSOP variant when a 28-pin board layout must be preserved across Flash-size migrations. This page synthesizes distributor pricing, verified drop-in alternatives, comparison data, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기

ATMEGA3209-AF

ATMEGA3209-AF - 8-Bit AVR MCU 20MHz 32KB Flash | Microchip

The Microchip Technology ATMEGA3209-AF is an 8-bit megaAVR 0-series microcontroller IC built around the AVR processor with a hardware multiplier, running at up to 20 MHz and integrating 32 KB (16K x 16) of Flash memory, 4 KB of SRAM and 256 bytes of EEPROM in a 48-pin TQFP (7 x 7 mm) package. The -AF variant is functional-safety (FuSa) oriented per Microchip's megaAVR 0-series safety documentation. A microcontroller (MCU) is a single-chip computer that combines a processor core, program memory, data memory and peripherals on one die. Within the power-management-free embedded hierarchy, an 8-bit MCU such as this sits at the entry-to-mid level of Microchip's portfolio, below 32-bit ARM-based MCUs, and is widely used for cost- and power-sensitive embedded control tasks where deterministic 8-bit execution is sufficient. Key features include the AVR RISC core executing most instructions in a single cycle, a 20 MHz maximum clock, 32 KB in-system self-programmable Flash, 4 KB SRAM, and 256 bytes of EEPROM for data retention without external memory. The megaAVR 0-series uses the latest Core Independent Peripherals, letting CCL, TCA/TCB timers, and event system offload tasks from the CPU. The 0-series architecture features a unified address space, single-cycle I/O access, an on-chip oscillator, and a rich peripheral set typical of the family, reducing external component count and board cost. The 48-pin TQFP offers 41+ general-purpose I/O lines in a 7 x 7 mm footprint with 0.5 mm pitch for hand-solderable yet compact designs. Typical applications include industrial automation nodes, home-appliance control, motor-adjacent sensing boards, and general embedded control where the FuSa-focused variant supports safety-conscious product development. Design tip: run the internal oscillator at 20 MHz to eliminate a crystal, but verify clock accuracy requirements for UART timing in your baud-rate budget; keep VDD/GND decoupling (100 nF per pin pair) close to the 48-TQFP power pins. This page synthesizes distributor pricing, drop-in family alternatives, pinout data, and practical design notes not found in a single manufacturer datasheet.

견적 요청 문의하기

하위 카테고리

제품 (35,000+)

ATMEGA2561V-8AUR - 8-bit AVR MCU 256KB Flash TQFP-64 | Microchip

ATMEGA2561V-8MI - 8-bit AVR MCU 256KB Flash 8MHz | Microchip

ATMEGA2561V-8MU - 8-bit AVR MCU, 256KB Flash, 8MHz | Microchip

ATMEGA32-16AC - 8-bit AVR MCU 16MHz 32KB Flash | Microchip

ATMEGA32-16AQ - 8-bit AVR MCU 16MHz 32KB Flash TQFP-44 | Microchip

ATMEGA32-16AQR - 8-Bit AVR MCU 32KB 16MHz | Microchip

ATMEGA32-16AUR - 8-Bit AVR MCU 32KB Flash 16MHz | Microchip

ATMEGA32-16MJ - 8-bit AVR MCU 16MHz 32KB Flash | Microchip

ATMEGA32-16PC - 8-Bit AVR MCU 16MHz 32KB Flash DIP-40 | Microchip

ATMEGA32-16PI - 16MHz 8-bit AVR MCU 32KB Flash DIP-40 | Microchip

ATMEGA32-16PJ - 8-Bit AVR MCU, 16MHz, 32KB Flash DIP-40 | Microchip

ATMEGA32-16PU - 8-bit AVR MCU 16MHz 32KB Flash | Microchip

ATMEGA3208-AF - 8-bit AVR MCU 32KB 20MHz TQFP-32 | Microchip

ATMEGA3208-AFR - 8-bit AVR MCU 32KB 20MHz TQFP-32 | Microchip

ATMEGA3208-AU - 8-bit AVR MCU 32KB 20MHz TQFP-32 | Microchip

ATMEGA3208-AUR - 8-bit AVR MCU 20MHz 32KB Flash | Microchip

ATMEGA3208-MF - 8-bit AVR MCU 20MHz 32KB Flash VQFN-32 | Microchip

ATMEGA3208-MFR - 8-bit AVR MCU 20MHz 32KB Flash QFN-32 | Microchip

ATMEGA3208-MUR - 8-bit AVR MCU 20MHz 32KB QFN-32 | Microchip

ATMEGA3208-XF - 20MHz 8-bit AVR MCU 32KB Flash | Microchip

ATMEGA3208-XFR - 8-bit AVR MCU 20MHz 32KB Flash | Microchip

ATMEGA3208-XU - 8-bit AVR MCU 20MHz 32KB Flash | Microchip

ATMEGA3208-XUR - 8-bit AVR MCU 20MHz 32KB Flash 28-SSOP | Microchip

ATMEGA3209-AF - 8-Bit AVR MCU 20MHz 32KB Flash | Microchip