집적 회로

ATMEGA3209-AFR

ATMEGA3209-AFR - 8-bit AVR 20MHz 32KB Flash MCU | Microchip

The Microchip ATMEGA3209-AFR is an 8-bit AVR megaAVR 0-series microcontroller with hardware multiplier running at up to 20 MHz, integrating 32 KB of Flash, 4 KB of SRAM, and 256 bytes of EEPROM in a 48-pin TQFP (7x7 mm) package with Functional Safety (FuSa) capability. It is part of Microchip's latest Core Independent Peripherals (CIP) family and operates across an industrial temperature range of -40C to +125C. An 8-bit AVR microcontroller is a compact, deterministic processor that combines an 8-bit data path with Harvard architecture and on-chip Flash program memory. Within the broader semiconductor hierarchy, AVR microcontrollers sit under the MCU (microcontroller unit) category, which itself falls under embedded processors, integrated circuits, and finally semiconductors. The ATMEGA3209-AFR belongs to the megaAVR 0-series - Microchip's modernized AVR line that introduces event system, configurable custom logic, and CIPs to offload tasks from the CPU. This makes the part family semantically richer than legacy ATmega328P-era devices. Key features include a 20 MHz maximum CPU clock, hardware multiplier for fast arithmetic, 32 KB self-programmable Flash with read-while-write support, 4 KB SRAM, 256 bytes EEPROM, multiple 16-bit timers, a 12-bit differential ADC, DAC, comparator, and configurable USART/SPI/TWI (I2C) interfaces. The Functional Safety (FuSa) variant is documented per IEC 60730 Class B, simplifying safety-critical appliance certification. The ATmega3209 architecture places event system routing and custom logic blocks alongside the CPU, allowing complex timing and signal conditioning without software intervention. This deterministic peripheral architecture reduces interrupt latency and frees CPU bandwidth for application logic, an important advantage over microcontrollers that rely solely on interrupt-driven peripherals. Typical applications include functional-safety home appliances (white goods), IoT sensor nodes, industrial control front-ends, lighting controllers, and human-machine interface (HMI) key panels. The TQFP-48 footprint with 0.5 mm pitch supports hand-solderable prototypes and standard SMT assembly lines. When designing with this device, ensure the ISP/UPDI programming interface is brought out to a test point. The TQFP-48 package benefits from a 4-layer PCB with a continuous ground pour under the IC to reduce ADC noise; do not route high-current traces beneath the part. This page synthesizes distributor pricing, drop-in alternatives (ATMEGA3209-MFR in QFN, ATMEGA3209-AU, ATMEGA3209-MU), and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기

ATMEGA3209-AU

ATMEGA3209-AU - 8-bit AVR MCU 32KB 20MHz TQFP-48 | Microchip

The Microchip Technology ATMEGA3209-AU is an 8-bit megaAVR 0-series microcontroller built on the AVR core with hardware multiplier, running at up to 20 MHz, integrating 32 KB Flash, 4 KB SRAM, and 256 bytes of EEPROM, and housed in a 48-pin TQFP package measuring 7x7 mm. It supports 1.8 V to 5.5 V supply voltage and exposes I2C, SPI, and UART/USART interfaces alongside multiple timer/counter and PWM peripherals. A microcontroller (MCU) is a single-chip computer that combines a processor core, non-volatile program memory, volatile data memory, and integrated peripherals such as timers, communication interfaces, and analog converters. The ATmega3209 belongs to the megaAVR 0-series, Microchip's 8-bit MCU family that sits alongside classic ATmega and tinyAVR lines, and is notable for its Core Independent Peripherals (CIPs) and event system that allow peripheral functions to run without CPU intervention. Key features include a maximum operating frequency of 20 MHz, 32 KB self-programmable Flash, 4 KB SRAM, 256 bytes of EEPROM, brown-out detection and power-on reset for safe Flash writes, multiple 16-bit timer/counters with PWM, and a peripheral event system that routes signals between on-chip peripherals deterministically. Functional Safety support makes this part suitable for safety-critical designs following IEC 60730 class B guidance. Architecturally, the ATmega3209 uses the latest AVR core with a two-stage pipeline and single-cycle execution for most instructions, and an integrated hardware multiplier for accelerated arithmetic. The 48-pin package variant exposes the maximum I/O count of the family, allowing service bus support for richer peripheral routing compared with the smaller 28-, 32-, or 40-pin variants in the same series. Typical applications include industrial control modules, home appliances, IoT sensor nodes, LED lighting controllers, and general consumer electronics where a robust 8-bit MCU with generous Flash, multiple serial ports, and Core Independent Peripherals provides deterministic behavior at low cost. Functional Safety support also enables white-good appliance designs. When designing with this device, select supply voltage and clock frequency together because the maximum clock speed scales with VDD. Always verify brown-out detector settings before Flash programming to guarantee safe writes, and reserve the 256-byte EEPROM for parameters that must survive power cycles such as calibration and runtime counters. This page synthesizes distributor pricing, drop-in alternatives within the megaAVR 0-series, and practical design notes not found in the manufacturer datasheet. Prices are quoted as of 2026-10-05.

견적 요청 문의하기

ATMEGA3209-AUR

ATMEGA3209-AUR - 20MHz 32KB AVR MCU, TQFP-48 | Microchip

The Microchip ATMEGA3209-AUR is an 8-bit AVR RISC microcontroller from the megaAVR 0-series with hardware multiplier, running at up to 20 MHz and integrating 32 KB of Flash, 4 KB of SRAM, and 256 bytes of EEPROM in a 48-pin TQFP package with tape-and-reel packaging. The part operates across a wide 1.8V to 5.5V supply range and integrates a 10-bit ADC, multiple USART/SPI/I2C interfaces, and brown-out detection for functional-safety applications. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and programmable I/O peripherals. The ATmega3209 belongs to the megaAVR 0-series, which targets low-power and functional-safety embedded designs, sitting in the broader hierarchy of microcontrollers -> microprocessors -> semiconductors. Compared to traditional AVR (e.g., ATmega328P) parts, the megaAVR 0-series uses a modernized core with Core Independent Peripherals (CIPs) for offloading tasks from the CPU. Key features include 32 KB in-system programmable Flash with read-while-write support, 4 KB SRAM, hardware multiplier for fast arithmetic, multiple 16-bit Timer/Counters, a 12-bit-configurable 10-bit ADC, and configurable custom logic. The integrated peripheral touch controller, event system, and CRC hardware accelerator support low-latency deterministic responses for safety-critical and Human-Machine Interface (HMI) applications. The device also includes a windowed watchdog timer and voltage-level BOD. Technically, the ATmega3209-AUR uses a 2-stage pipelined Harvard architecture with separate program/data buses and a 3-channel event system for inter-peripheral signaling without CPU intervention. Its low-power Sleep modes (Idle, Standby, Power-Down, Power-Save) achieve quiescent currents down to single-digit microamps when peripheral clocks are gated, and the integrated Core Independent Peripherals (CIPs) can wake the core only when needed - delivering reduced average power consumption over legacy AVR designs. Typical applications include industrial sensor nodes, building automation controllers, low-power IoT edge nodes, functional-safety subsystems, white-goods and consumer HMI, and battery-powered portable instruments. Designers often pair the ATmega3209 with a low-power sensor and a wireless transceiver such as an SPI-controlled sub-GHz or BLE module for cloud-connected telemetry. When designing with this part, ensure decoupling of VDD and AVCC with at least 100 nF each placed within 2 mm of the supply pins, and route the analog/digital grounds as a star connection to minimize ADC noise. For functional-safety firmware, use the integrated windowed watchdog and the CRC peripheral to detect runaway code paths. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers shorten the BOM selection and PCB layout phases for ATmega3209-based designs.

견적 요청 문의하기

ATMEGA3209-MF

ATMEGA3209-MF - 8-Bit AVR MCU 20MHz 32KB QFN-48 | Microchip

The Microchip Technology ATMEGA3209-MF is an 8-bit AVR megaAVR 0-series Functional Safety (FuSa) microcontroller running at up to 20 MHz, with 32 KB (16K x 16) Flash, 4 KB SRAM and 256 bytes of EEPROM, housed in a 48-pin QFN (7x7 mm) surface-mount package. It integrates I2C, SPI and UART/USART connectivity with peripherals including brown-out detect and reset. An 8-bit microcontroller is a single-chip computing device whose CPU processes data in 8-bit words, combining a processor core, program memory (Flash), data memory (SRAM/EEPROM) and peripherals on one die. Within the system hierarchy, it belongs to the embedded MCU class of the megaAVR 0 series, positioned between small 8-bit MCUs like the tinyAVR family and larger 32-bit ARM-based MCUs. The megaAVR 0 series uses the latest AVR Core Independent Peripherals, letting timers, ADC and communication blocks run without CPU intervention. Key features of the ATMEGA3209-MF include the 20 MHz AVR processor with a hardware multiplier for fast arithmetic, 32 KB Flash for application code, and the Functional Safety (FuSa) qualification that supports IEC 61508-class designs. Multiple USARTs, an SPI and an I2C peripheral, plus a 10-bit ADC and event system, make it suitable for compact, code-dense embedded control. Technically, the AVR RISC core executes most instructions in a single clock cycle, so the 20 MHz clock delivers high effective throughput for an 8-bit architecture. The hardware multiplier accelerates signal processing and control loops, while Core Independent Peripherals offload timing and analog tasks from the CPU, reducing interrupt latency and power consumption. Typical applications include industrial automation and control nodes, embedded systems requiring functional-safety documentation, consumer appliances, and sensing/IoT endpoints that need rich connectivity in a small 7x7 mm QFN-48 footprint. Community firmware support such as MegaCoreX Arduino support for the ATmega3209 further speeds prototyping. Design consideration: verify the exact supply-voltage range and temperature grade on the official datasheet before finalizing the power budget, and reserve the UPDI programming pin access on your PCB for one-wire debug and Flash programming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Pricing references are as of 2026-09-17, with entry-level pricing from LCSC from $0.6775.

견적 요청 문의하기

ATMEGA3209-MU

ATMEGA3209-MU - 32KB AVR 8-Bit MCU 20MHz 48-QFN | Microchip

The Microchip Technology ATMEGA3209-MU is an 8-bit megaAVR 0-series microcontroller with an AVR RISC core and hardware multiplier, running at up to 20 MHz with 32 KB Flash (16K x 16), 4 KB SRAM, and 256 bytes of EEPROM, housed in a 48-pin QFN (7x7 mm) package. An 8-bit microcontroller (MCU) is an integrated circuit that combines a processor core, memory, and peripherals on a single chip, executing one instruction per cycle on 8-bit data words. Within the embedded systems hierarchy, the megaAVR 0-series sits in the general-purpose MCU family under Microchip's AVR portfolio, positioned for cost-sensitive, moderate-complexity control tasks. Key features include the AVR Core Independent Peripherals (CIPs), which allow peripherals such as PWM timers, the RTC, and Configurable Custom Logic (CCL) to operate without CPU intervention. The device integrates four USARTs, SPI, and TWI (I2C) interfaces per the distributor-verified specification, plus a 12-bit ADC and analog comparators for mixed-signal sensing. Operating voltage spans the classic AVR 1.8V to 5.5V range, supporting direct connection to 3.3V and 5V systems. Architecturally, the ATmega3209 executes most instructions in a single clock cycle, and the hardware multiplier accelerates math-intensive firmware. The event system routes peripheral signals internally, reducing latency and interrupt load. Single-pin Unified Program and Debug Interface (UPDI) simplifies programming with a single-wire connection. Typical applications include industrial control, home appliances, IoT sensor nodes, and motor control or power-tool end points where a 5V-tolerant 8-bit MCU simplifies design. A key design consideration is clock selection: at 20 MHz the device delivers peak throughput, but calibrating the internal oscillator or using an external crystal affects UART baud accuracy in multi-USART designs. This page synthesizes verified distributor data, drop-in same-family alternatives, and practical design guidance not found in a single datasheet excerpt.

견적 요청 문의하기

ATMEGA323-8AC

ATMEGA323-8AC - 8MHz AVR MCU 32KB Flash TQFP-44 | Microchip

The Microchip ATMEGA323-8AC is an 8-bit AVR ATmega microcontroller with 32KB in-system programmable Flash (16K x 16), 2KB SRAM, 1KB EEPROM, and a maximum clock speed of 8MHz, housed in a 44-pin TQFP (10x10 mm) package. An 8-bit AVR microcontroller is a Harvard-architecture RISC processor in which program memory and data memory occupy separate address spaces, allowing most instructions to execute in a single clock cycle. Within the power-management hierarchy, an MCU of this class combines CPU, program memory, data memory, timers, communication peripherals, and an ADC in a single integrated circuit, replacing multi-chip discrete designs. Key features include the advanced AVR RISC architecture with 131 powerful instructions, most executing in a single clock cycle; eight 8-bit general-purpose working registers; and fully static operation delivering throughput approaching 1 MIPS per MHz. Connectivity is versatile, with I2C, SPI, and UART/USART interfaces supporting a wide range of peripheral and communication designs. In-system programmable Flash allows firmware updates without removing the device from the board. The ATmega323 achieves throughput approaching 1 MIPS per MHz by executing powerful instructions in a single clock cycle, letting system designers optimize power consumption versus processing speed. The 32KB self-programmable Flash supports boot-loader-based firmware updates, while the separate 1KB EEPROM retains calibration and configuration data through power cycles and Flash reprogramming cycles. Typical applications include industrial control panels, embedded instrumentation, communication bridges using the I2C/SPI/UART peripherals, and legacy designs requiring ATmega323-family compatibility. The 8MHz grade suits standard 4-5V systems where moderate processing throughput is sufficient. Design consideration: as the ATmega323 family has been superseded by newer AVR parts, plan firmware and board strategy around the ATmega32 pin-compatible successor for new designs. The -8AC suffix denotes an 8MHz commercial temperature grade. This page synthesizes distributor availability data, drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet, as of 2026-09-17.

견적 요청 문의하기

ATMEGA323-8PC

ATMEGA323-8PC - 8-Bit AVR MCU, 32KB Flash, 8MHz | Atmel

The Atmel (now Microchip Technology) ATMEGA323-8PC is an 8-bit AVR RISC microcontroller with 32KB of In-System Programmable Flash, 2KB SRAM, 1KB EEPROM, an 8MHz maximum clock speed, and a 4.5V to 5.5V supply range, housed in a 40-pin PDIP (DIP-40) through-hole package. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals on one die, sitting below application processors and above simple logic ICs in the embedded-system hierarchy. The AVR family uses an advanced RISC architecture with a Harvard memory structure, meaning program and data buses are separate and most instructions execute in a single clock cycle. Key features include 131 powerful instructions (most single-cycle), up to 16 MIPS throughput at 16MHz-class operation, and 32 general-purpose working registers directly connected to the ALU. Peripheral set includes Brown-out Detect/Reset (BOD), Power-on Reset (POR), PWM timers, a Watchdog Timer (WDT), plus I2C (TWI), SPI, and UART/USART serial interfaces. The 32KB Flash supports In-System Programming, enabling field firmware updates without removing the chip. Architecturally, the ATmega323 executes code from Flash at up to 1 MIPS per MHz, letting designers trade clock speed for power consumption. The JTAG-compatible pin arrangement on port C supports boundary-scan and on-chip debugging on related family members, while the large 40-PDIP package offers generous 0.1-inch pin spacing ideal for prototyping, ZIF sockets, and through-hole assembly. Typical applications include industrial control and automation nodes, educational and hobby embedded platforms, legacy equipment maintenance where socketed MCUs simplify replacement, and instrumentation requiring 5V-tolerant I/O and the 4.5V to 5.5V industrial supply range. Design consideration: the -8PC suffix specifies 8MHz speed grade, 0C to +70C commercial temperature rating, and 5V PDIP packaging. For 3V systems or wider temperature ranges, select the L-suffix (2.7V to 5.5V) or I-suffix (industrial temperature) variants instead. This page synthesizes distributor pricing, drop-in alternatives from the same AVR family, pinout data, and practical design notes beyond what the manufacturer datasheet provides.

견적 요청 문의하기

ATMEGA323-8PI

ATMEGA323-8PI - 8-bit AVR MCU 32KB Flash 8MHz DIP-40 | Microchip

The Microchip Technology ATMEGA323-8PI is an 8-bit AVR RISC microcontroller with 32KB of In-System Programmable Flash, 2KB SRAM, 1KB EEPROM, and 8MHz maximum clock speed, packaged in a 40-pin PDIP (0.600 inch / 15.24mm) industrial-temperature device rated -40C to +85C. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals on one die. The AVR ATmega family sits within the 8-bit microcontroller hierarchy, widely used in embedded control, industrial automation, and legacy system maintenance. The ATmega323 belongs to the high-performance, low-power AVR product line originally developed by Atmel, now owned by Microchip Technology. Key features include the Advanced RISC architecture with 131 powerful instructions, most executing in a single clock cycle, and fully static operation delivering up to 16 MIPS throughput at 16MHz (8 MIPS at the 8MHz grade of this part). The device provides 32KB (16K x 16) self-programmable Flash, 2KB internal SRAM, 1KB EEPROM for nonvolatile data, a JTAG interface for on-chip debugging and boundary scan, plus USART, SPI, and TWI serial interfaces and an 8-channel 10-bit ADC. Technically, the ATmega323 was the first ATmega device to add JTAG on-chip debug, and its Harvard-architecture core fetches instructions and data over separate buses. Boot-section Flash with read-while-write support enables in-system firmware updates, while in-circuit programming via SPI allows field programming without removing the device from the PCB. Typical applications include legacy industrial control boards, test fixtures, educational embedded platforms, motor and relay control, and repair of equipment originally designed around 40-pin ATmega devices where a socketed DIP package simplifies replacement. Design consideration: at 8MHz this grade requires VCC of 4.5V to 5.5V; the pin-compatible ATMEGA32-16PU offers a 16MHz speed upgrade in the identical DIP-40 footprint if performance headroom is needed. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기

ATMEGA323L-4AI

ATMEGA323L-4AI - 8-bit AVR MCU 32KB 4MHz TQFP-44 | Microchip

The Microchip Technology (Atmel) ATMEGA323L-4AI is a low-power 8-bit AVR RISC microcontroller with 32KB of In-System Programmable Flash (16K x 16), 2KB of SRAM, and a maximum operating frequency of 4MHz, housed in a 44-pin TQFP (10 x 10 mm) package rated for the industrial temperature range (-40C to +85C). The 'L' suffix denotes the low-voltage grade supporting 2.5V, 3.3V and 5V supply operation. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals onto one die, forming the lowest tier of the embedded processing hierarchy (MCU -> embedded processor -> microprocessor). The ATmega323 belongs to the AVR family, based on the AVR enhanced RISC architecture that executes powerful instructions in a single clock cycle, achieving throughputs approaching 1 MIPS per MHz. Key features include 131 powerful instructions with mostly single-clock cycle execution, eight general purpose working registers, fully static operation up to 16 MIPS throughput capability, and In-System Programmable (ISP) Flash for firmware updates without removing the device from the PCB. Architecturally, the AVR core uses a Harvard structure with separate program and data buses, allowing instruction fetch and data access to occur simultaneously. This single-cycle execution model is what lets the ATmega323 optimize power consumption versus processing speed, a core design goal stated in the Atmel datasheet. Typical applications include battery-powered instrumentation, industrial control nodes, consumer appliance control panels, and embedded sensing systems where the low-voltage 2.5V-3.3V operation of the L grade and the compact 10x10 mm TQFP footprint are advantageous. When designing with this device, verify that your required clock rate does not exceed the 4MHz limit of the L speed grade; higher-frequency needs require the ATMEGA323-8AI (8MHz) variant. This page synthesizes distributor pricing, verified datasheet parameters, and practical drop-in alternative guidance not consolidated in the manufacturer datasheet.

견적 요청 문의하기

ATMEGA323L-4PC

ATMEGA323L-4PC - 8-bit AVR MCU 32KB Flash 4MHz DIP-40 | Microchip

The Microchip Technology (Atmel) ATMEGA323L-4PC is an 8-bit AVR RISC microcontroller with 32KB of in-system programmable Flash, 2KB of SRAM, and a 2.7V to 5.5V operating supply, delivered in a 40-pin PDIP (DIP-40) package rated for 4MHz clocking in the low-voltage L speed grade. An 8-bit microcontroller is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals on one die. Within the power-management/embedded hierarchy, the ATmega323 belongs to the AVR family - an advanced RISC architecture executing 131 powerful instructions, most in a single clock cycle, through eight general-purpose working registers and fully static operation offering up to 16 MIPS throughput at maximum frequency. Key features of the ATMEGA323L-4PC include in-system programmable (ISP) 32KB Flash organized for self-programming, 2KB of internal SRAM for data buffering, and the AVR single-cycle RISC core that lets the L-4 speed grade sustain useful throughput even at 4MHz. The wide 2.7V to 5.5V supply range allows direct operation from a 3.3V rail while remaining 5V-tolerant, which is valuable in mixed legacy designs. The through-hole DIP-40 package makes the part ideal for prototyping, education, and socketed industrial boards. Technically, the AVR core achieves close to 1 MIPS per MHz by fetching one instruction word from program memory on every cycle, a Harvard-architecture split that separates the 32KB Flash bus from the SRAM data path. In-system programming via the SPI serial port allows firmware updates without removing the device from the board, reducing field-service cost. Typical applications include industrial control panels, legacy board maintenance and repair, academic embedded-lab training boards, and hobby or prototype systems that require through-hole mounting and socketed replacement. Design consideration: the L grade is specified at 4MHz - do not clock above this rating at 2.7V to 5.5V; use the standard ATMEGA323-8 speed grade for higher frequencies. This page synthesizes distributor pricing, drop-in alternative analysis, and sourcing information not consolidated in the manufacturer datasheet.

견적 요청 문의하기

ATMEGA324A-AU

ATMEGA324A-AU - AVR MCU 32KB Flash 20MHz TQFP-44 | Microchip

The Microchip Technology ATMEGA324A-AU is an 8-bit AVR RISC microcontroller with 32KB ISP Flash memory, 1KB EEPROM, 2KB SRAM, and 32 general-purpose I/O lines, housed in a 44-pin TQFP package and rated for up to 20 MHz operation across the industrial temperature range. An 8-bit microcontroller is a self-contained computing IC that integrates a processor core, program memory, data memory, and peripherals such as timers, serial interfaces, and ADCs on a single die. Within the power-management hierarchy of embedded systems, it sits above discrete logic and below application processors, and is typically paired with a voltage regulator, clock source, and reset supervisor to form a complete control node. Key features include the AVR Advanced RISC architecture with 131 powerful instructions, most executing in a single clock cycle, plus 32 general-purpose working registers directly connected to the ALU. The device provides a real time counter, three flexible timers/counters with compare modes and PWM, and serial peripherals including USART, SPI (Serial Peripheral Interface), and 2-Wire interface (I2C/TWI), enabling rich connectivity in a compact footprint. Technical depth: Flash memory carries read-while-write capability, allowing firmware self-programming for bootloaders and field upgrades via In-System Programming (ISP). The enhanced core sustains close to 1 MIPS per MHz throughput, so a 16 MHz crystal delivers roughly 16 MIPS while remaining within the 4.5V to 5.5V supply band for full-speed industrial operation. Multiple power-saving sleep modes and the PicoPower-derived power-management heritage allow microamp-level standby currents in battery-aware designs. Typical applications include industrial automation and control panels, home appliances and HVAC controllers, sensor and data-logging nodes, and motor control sub-systems where the 32 I/O lines and PWM timers are fully utilized. Design consideration: use 0.1uF decoupling capacitors on both VCC/AVCC pairs and route the analog ground reference carefully to preserve ADC accuracy; verify that the supply voltage supports your chosen clock frequency per the Microchip speed-grade curve. This page synthesizes distributor pricing, drop-in same-family alternatives, pinout data, and practical design notes not found on a single manufacturer page.

견적 요청 문의하기

ATMEGA324A-CUR

ATMEGA324A-CUR - 8-bit AVR MCU 32KB Flash 20MHz | Microchip

The Microchip Technology ATMEGA324A-CUR is an 8-bit AVR RISC microcontroller with 32KB ISP Flash, 1KB EEPROM, 2KB SRAM, a 20MHz maximum clock, and 1.8V to 5.5V supply operation, housed in a 49-ball VFBGA (5x5 mm) package supplied on tape and reel. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals such as timers, UARTs, and ADCs on one die. Within the power-management hierarchy of embedded systems, the MCU sits at the application layer: AVR MCUs like the ATmega324A execute control loops, communication, and signal acquisition, replacing multi-chip discrete logic with one programmable device. Key features include an advanced RISC architecture with 131 powerful instructions, most executing in a single clock cycle; 32 general-purpose working registers; and 32 general-purpose I/O lines. The read-while-write ISP Flash enables self-programming for firmware updates in the field, while the real-time counter plus three flexible timers support precision timing tasks. Technically, the ATmega324A pairs its pipelined AVR core with a 10-bit ADC, multiple serial interfaces, and an on-chip debug/programming channel via In-Circuit Serial Programming (ICSP), compatible with Microchip MPLAB SNAP and Atmel-ICE tools. The wide 1.8V to 5.5V operating range covers 2.5V, 3.3V, and 5V rails, letting one design span battery and industrial voltage domains. Typical applications include industrial sensor nodes, consumer appliance control, and portable battery-powered devices where the compact 5x5 mm VFBGA footprint saves PCB area. Design consideration: at 20MHz the part achieves up to 20 MIPS, but full-speed operation at the lowest voltage is derated per the datasheet frequency-versus-voltage curve, so check safe operating margins for 1.8V designs. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기

ATMEGA324A-MCHR

ATMEGA324A-MCHR - 8-bit AVR MCU 32KB Flash 20MHz VQFN-44 | Microchip

The Microchip Technology ATMEGA324A-MCHR is an 8-bit AVR RISC microcontroller with 32KB ISP Flash memory, 1KB EEPROM, and 2KB SRAM, delivering 32 general-purpose I/O lines at clock speeds up to 20 MHz in a 44-pin VQFN (MLF) surface-mount package with exposed pad. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripherals such as timers, UARTs, and ADCs into one chip. Microcontrollers form the lowest tier of the embedded-computing hierarchy, sitting below system-on-chip (SoC) and application processor families, and are the workhorses of embedded control, IoT nodes, and industrial automation. The ATmega324A belongs to the classic 8-bit AVR family originally developed by Atmel, now part of Microchip Technology. Key features include the advanced RISC architecture with 131 powerful instructions, most of which execute in a single clock cycle, plus 32 general-purpose working registers. Read-while-write Flash allows self-programming for bootloaders and field firmware updates. Peripherals include a real-time counter, three flexible timers with PWM, multiple USARTs, an SPI interface, a two-wire interface (TWI/I2C), and a 10-bit ADC, enabling compact single-chip designs. The enhanced AVR core achieves roughly 1 MIPS per MHz throughput, so at the maximum 20 MHz clock the device delivers approximately 20 MIPS. In-System Programming (ISP) over SPI permits programming without removing the chip from the board, reducing production cost. The 2KB SRAM provides adequate headroom for modest protocol stacks and control loops, while the 1KB EEPROM retains calibration data through power cycles. Typical applications include industrial automation and sensor acquisition nodes, consumer appliances and HVAC controls, and battery-powered instrumentation where the low-power AVR core and wide voltage operation keep average current low. Design consideration: the MCHR suffix denotes the industrial-temperature, 20 MHz VQFN-44 speed/package grade; verify the supply voltage range on the current Microchip datasheet, since distributor summaries occasionally cite different speed-grade figures. This page synthesizes verified distributor data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기

ATMEGA324A-MU

ATMEGA324A-MU - 8-bit AVR MCU 32KB Flash 20MHz | Microchip

The Microchip Technology ATMEGA324A-MU is an 8-bit AVR RISC microcontroller with 32KB ISP Flash memory, 1KB EEPROM, and 2KB SRAM, delivered in a 44-pin VQFN (VFQFN) package with exposed pad and rated for up to 20 MHz operation across an industrial temperature range. A microcontroller unit (MCU) integrates a processor core, program memory, data memory, and peripherals on a single silicon die. Within the power-management and embedded-systems hierarchy, the ATmega324A sits in the general-purpose 8-bit MCU family, a class still widely chosen for cost-sensitive, low-power control tasks where a 32-bit device would add cost and complexity without benefit. Key features include the AVR enhanced RISC architecture executing 131 powerful instructions, most in a single clock cycle, delivering throughput close to 1 MIPS per MHz. The 32KB of In-System Programmable (ISP) Flash supports read-while-write operation, allowing firmware updates while executing. The part provides 32 general-purpose I/O lines and 32 general-purpose working registers directly connected to the ALU, enabling efficient single-instruction access to two independent registers. Technical depth: the ATmega324A is fabricated in a low-power CMOS process and belongs to the ATmega164A/324A/644A/1284 datasheet family, which shares a common peripheral set including a real-time counter, multiple timers, USART, SPI, and TWI (I2C) serial interfaces. Operating voltage coverage of 2.5V, 3.3V, and 5V systems allows a single design to serve multiple power domains, with the -MU suffix denoting the VQFN industrial-temperature tape-and-reel option. Typical applications include industrial automation controllers, sensor and data-acquisition nodes, HVAC and building-control boards, and consumer appliances that need robust 5V-tolerant I/O with mature tooling. Design consideration: the 44-VFQFN exposed pad should be soldered to a grounded thermal land pattern for both mechanical reliability and heat dissipation; omitting the exposed-pad connection is a common field-failure cause on QFN AVRs. This page synthesizes verified distributor pricing, drop-in same-family alternatives, and practical design guidance not consolidated in the manufacturer datasheet.

견적 요청 문의하기

ATMEGA324P-15AT

ATMEGA324P-15AT - 8-bit AVR MCU, 32KB Flash 44-TQFP | Microchip

The Microchip Technology ATMEGA324P-15AT is an 8-bit AVR RISC microcontroller with 32 KB ISP Flash memory, 1 KB EEPROM, 2 KB SRAM, and 32 general-purpose I/O lines, executing up to 16 MIPS at 16 MHz in a 44-pin TQFP (10x10 mm) package. It is AEC-Q100 qualified and positioned for automotive and industrial embedded control. An 8-bit AVR microcontroller is a single-chip computer built around the AVR enhanced RISC core, which belongs to the broader hierarchy of embedded processors: MCU -> microcontroller -> integrated circuit -> semiconductor. The AVR architecture loads one instruction per clock cycle through a single-stage pipeline, and combines a Harvard bus structure with 32 general-purpose working registers directly connected to the arithmetic logic unit, allowing most instructions to execute in a single cycle. Key features of the ATMEGA324P-15AT include read-while-write ISP Flash for self-programming, the picoPower technology set for low standby consumption, two 8-bit timers, one 16-bit timer, a 10-bit ADC with up to 8 single-ended channels, an analog comparator, USART, SPI and two-wire (I2C-compatible) TWI serial interfaces, plus a JTAG interface for boundary scan and on-chip debugging. Technically, the picoPower platform combines a low-leakage process with software-selectable sleep modes, including power-save and standby modes with a running 32.768 kHz crystal timer, enabling battery-backed automotive modules to hold real-time functions in the microampere range. The P suffix denotes the picoPower die generation of the ATmega324 family, and the 15 speed grade supports full function at 16 MHz across the supply window per the speed-versus-voltage curve of the AVR ATmega series. Typical applications include automotive body and comfort control nodes, industrial sensor and actuator controllers, motor control panels, HVAC systems, and battery-powered instrumentation where AEC-Q100 qualification and mature tooling matter. Design consideration: respect the AVR clock-versus-VCC safe operating region - at 16 MHz the device must be operated in the upper supply range, so avoid undervoltage brownout conditions by enabling the internal brown-out detector. This page synthesizes distributor pricing, drop-in alternatives within the AVR ATmega family, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기

ATMEGA324P-15AT1

ATMEGA324P-15AT1 - 8-Bit AVR MCU 16MHz 32KB Flash | Microchip

The Microchip (Atmel) ATMEGA324P-15AT1 is a picoPower 8-bit AVR RISC microcontroller delivering 16 MIPS at 16 MHz, with 32 KB ISP Flash memory, 2 KB SRAM, 1 KB EEPROM, and 32 general purpose I/O lines in a 44-pin TQFP (10x10 mm) package, and it is AEC-Q100 qualified for automotive use. An 8-bit AVR microcontroller is a Harvard-architecture RISC processor that executes most instructions in a single clock cycle, sitting within the broader hierarchy of embedded processors: MCU -> AVR ATmega family -> microcontroller unit (MCU) -> semiconductor integrated circuit. AVRs integrate program Flash, data SRAM, EEPROM, timers, UART/SPI/TWI serial interfaces and a 10-bit ADC on a single die, replacing multi-chip solutions in cost- and power-sensitive embedded control designs. Key features include the picoPower low-power technology with idle, power-down and power-save sleep modes, read-while-write Flash for in-system self-programming, and a rich peripheral set: two 8-bit timers, one 16-bit timer, real-time counter, 8-channel 10-bit ADC, USART, SPI and two-wire (I2C) interfaces, and an on-chip debug capability via debugWIRE-style ICSP using just two I/O pins plus reset. The AVR core pairs 32 general purpose working registers directly with the ALU, eliminating the accumulator bottleneck of older 8051-class architectures. In-system programmable (ISP) Flash supports firmware updates in the field through SPI, while boot-section self-programming enables bootloader-based updates over UART. Typical applications include automotive body and comfort modules (leveraging its AEC-Q100 qualification), industrial sensors and actuators, and consumer appliance control boards where 5V-tolerant I/O and wide 2.7V to 5.5V supply operation simplify system design. When designing with this device, budget the maximum 16 MHz clock against your 5.5V worst-case supply, and reserve the PC2-PC7 pins carefully since they double as JTAG/oscillator functions; configure fuses deliberately because an incorrect clock fuse selection can lock out ICSP access. This page synthesizes distributor pricing (LCSC, DigiKey, Octopart), same-footprint drop-in alternatives within the AVR family, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기

ATMEGA324P-15MT

ATMEGA324P-15MT - 8-bit AVR MCU 16MHz 32KB Flash VQFN-44 | Microchip

The Microchip Technology ATMEGA324P-15MT is a picoPower 8-bit AVR RISC microcontroller delivering 16 MIPS at 16 MHz, with 32 KB ISP Flash memory, 1 KB EEPROM, 2 KB SRAM, and 32 general purpose I/O lines, housed in a 44-pin VQFN (7x7 mm) surface-mount package. An 8-bit AVR microcontroller is a single-chip computer that integrates a RISC processor core, program memory, data memory, timers, serial peripherals, and analog converters on one die. Within the semiconductor hierarchy it belongs to the microcontroller (MCU) family: processor core, then microcontroller, then embedded system-on-chip. MCUs run the firmware that controls everything from household appliances to industrial sensors, executing deterministic real-time code with low power consumption. The ATMEGA324P is built on the Advanced RISC Architecture with 131 powerful instructions, most executing in a single clock cycle, plus 32 general purpose working registers that are directly connected to the arithmetic logic unit. picoPower technology enables aggressive sleep modes, with the real-time counter running independently to support battery-powered designs. Peripherals include three flexible timer/counters with compare modes and PWM, two USARTs, a byte-oriented Two-Wire serial interface (I2C-compatible), an SPI interface, and an 8-channel 10-bit ADC. In-system programmable (ISP) Flash with read-while-write capability allows firmware updates in the field without removing the device. The 16 MHz maximum clock, internal oscillator option, and wide operating voltage range make the part suitable for both cost-optimized and low-power designs. Typical applications include industrial sensor nodes, HVAC and building automation, consumer appliances, motor control using timer PWM outputs, and battery-powered metering products where the picoPower sleep currents extend battery life. A key design consideration: VQFN packages require a well-defined PCB land pattern and adequate thermal via stitching under the exposed pad for reliable soldering and ground return. This page synthesizes distributor availability data, drop-in alternatives within the AVR ATmega family, and practical design guidance not found in the manufacturer datasheet. Pricing references are as of 2026-09-17.

견적 요청 문의하기

ATMEGA324P-15MT1

ATMEGA324P-15MT1 - 8-bit AVR MCU 32KB 44-QFN | Microchip

The Microchip Technology ATMEGA324P-15MT1 is an 8-bit AVR RISC microcontroller with 32KB of ISP Flash program memory, 1KB EEPROM, 2KB SRAM, 32 general-purpose I/O lines, and a maximum operating frequency of 16 MHz, housed in a 44-pin VQFN (44-VFQFN, 7x7 mm) package with exposed pad. It is part of the AVR ATmega family and carries Automotive AEC-Q100 qualification, indicated by the T1 temperature/suffix coding of the 15M speed-grade family. An 8-bit AVR microcontroller is a Harvard-architecture RISC processor that executes most instructions in a single clock cycle, placing it in the microcontroller tier of the semiconductor hierarchy (microcontroller -> embedded processor -> integrated circuit). ATmega devices combine program Flash, data SRAM, and EEPROM on one die, along with timers, ADC channels, and serial communication interfaces, forming a complete embedded control system on a single chip. Key features include read-while-write Flash operation for in-system self-programming, 32 general-purpose working registers directly connected to the ALU, and multiple serial interfaces including SPI and TWI (I2C-compatible) plus USART channels. The 44-QFN exposed-pad package provides a compact 7x7 mm footprint with improved thermal and ground performance, suiting space-constrained industrial and automotive nodes. The device belongs to Microchip's picoPower ATmega324P generation, which emphasizes low power consumption through multiple sleep modes, allowing battery-powered and always-on automotive body-electronic applications to minimize standby current. The AVR core supports In-Circuit Serial Programming (ICSP) and on-chip debugging via the debugWIRE interface using the RESET line. Typical applications include automotive auxiliary control modules, industrial sensor and actuator nodes, HVAC and appliance controllers, and handheld instrumentation where a 5V-tolerant 8-bit MCU with 2.7V to 5.5V supply range simplifies mixed-voltage system design. Designers should note that the exposed pad must be soldered to a grounded PCB land pattern for both mechanical reliability and EMC performance, and fuse-bit configuration governs clock source and boot-loader operation. This page synthesizes verified distributor specifications, drop-in family alternatives, and practical design notes beyond what typical distributor listings provide.

견적 요청 문의하기

ATMEGA324P-15MZ

ATMEGA324P-15MZ - 8-Bit AVR MCU 16MHz 32KB Flash | Microchip

The Microchip Technology ATMEGA324P-15MZ is an 8-bit AVR RISC microcontroller featuring 16MHz max core speed, 32KB (16K x 16) ISP Flash program memory, 2KB SRAM and 1KB EEPROM, housed in a 44-pin VQFN (7x7 mm) surface-mount package with exposed pad. The device provides 32 general purpose I/O lines and 32 general purpose working registers. A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory and peripherals into one chip, forming the heart of embedded systems. The AVR ATmega family sits within the broader hierarchy of 8-bit MCUs, embedded processors, and semiconductors. AVR cores execute most instructions in a single clock cycle through a Harvard architecture with separate program and data buses, delivering high code efficiency for C and assembly programming. Key features of this part include 32KB of ISP Flash with read-while-write capability for in-system firmware updates, 1KB of on-chip EEPROM for non-volatile parameter storage, and in-circuit debugging plus In-Circuit Serial Programming (ICSP) support via just two I/O pins and the reset line. According to Microchip, the picoPower technology on the ATmega324P platform reduces power consumption in sleep and standby modes, extending battery life in portable designs. Technical depth: the AVR RISC core pairs a rich instruction set with fast single-cycle execution, while the peripheral set typical of the ATmega324P family includes USART, SPI, I2C-compatible TWI, timers, and a 10-bit ADC, allowing one chip to handle communications, timing and analog sensing simultaneously. Firmware is developed in Microchip's MPLAB X ecosystem; the MPLAB SNAP programmer connects through an 8-pin SIL connector and implements ICSP and on-chip debugging. Typical applications include industrial control and automation nodes, battery-powered instruments, sensor interfaces and consumer appliances where 32KB of flash, 2KB of RAM and 16MHz throughput are sufficient. Design consideration: the 44-VQFN exposed-pad package requires a well-defined ground plane on the PCB; verify the 16MHz speed grade against your supply voltage before finalizing the design, and reserve programming pads for the two ICSP pins during layout. This page synthesizes distributor availability, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, so engineers can evaluate sourcing risk and second sources in one place. Pricing and stock refresh as of 2026-09-17.

견적 요청 문의하기

ATMEGA324P-20AQR

ATMEGA324P-20AQR - 8-bit AVR MCU, 32KB Flash, 20MHz | Microchip

The Microchip ATMEGA324P-20AQR is a picoPower 8-bit AVR RISC microcontroller delivering up to 20 MIPS throughput at 20 MHz, with 32 KB ISP Flash, 1 KB EEPROM, and 2 KB SRAM, housed in a 44-pin TQFP (10x10 mm) surface-mount package rated for extended temperature operation at 2.7V to 5.5V. An 8-bit AVR microcontroller is a single-chip computing device that integrates a Harvard-architecture RISC processor core, program Flash memory, data SRAM, nonvolatile EEPROM, and a rich set of peripherals (timers, USARTs, SPI, ADC) on one die. Within the power-management hierarchy, microcontrollers such as the ATmega324P sit at the top of embedded control systems, replacing discrete MCU-plus-logic combinations in cost- and power-sensitive designs. Key features of this device include 131 powerful instructions with most executing in a single clock cycle, 32 general-purpose working registers, and read-while-write Flash that allows firmware self-programming. The picoPower technology provides aggressive sleep modes - power-down, power-save, and standby - for battery applications. Two USARTs, one SPI, one two-wire (I2C) interface, an 8-channel 10-bit ADC, and a JTAG boundary-scan/debug port round out the peripheral set. Architecturally, the advanced RISC core is fully static, allowing clock frequencies down to DC without state loss. Hardware multipliers and single-cycle ALU operations let the ATMEGA324P-20AQR sustain up to 16-20 MIPS, while the pipelined fetch achieves near one-MIPS-per-MHz efficiency. In-system programmability via SPI (ICSP) and JTAG on-chip debugging simplify development and field updates. Typical applications include industrial automation nodes and sensor hubs (extended temperature rating supports harsh environments), consumer appliances and HVAC controllers that leverage the 10-bit ADC, and battery-powered meters where picoPower sleep currents extend battery life for years. Design consideration: the 44-pin TQFP requires careful decoupling - place 100 nF ceramic capacitors at both VCC pins and AVCC close to the die, and route the reset trace short with an external 10 kOhm pull-up for reliable ICSP programming. This page synthesizes verified distributor data, drop-in alternative MPNs, pinout detail, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기

ATMEGA324P-20AU

ATMEGA324P-20AU - 8-bit AVR MCU 20MHz 32KB Flash | Microchip

The Microchip Technology ATMEGA324P-20AU is a high-performance picoPower 8-bit AVR RISC microcontroller delivering 20 MIPS at 20 MHz, with 32 KB ISP Flash, 1 KB EEPROM, and 2 KB SRAM, housed in a 44-pin TQFP (10x10 mm) surface-mount package operating from a 5V supply. An 8-bit AVR microcontroller is a Harvard-architecture RISC processor that executes most instructions in a single clock cycle, positioning it in the embedded control hierarchy between simple 8051-class MCUs and 32-bit ARM Cortex-M devices. The ATmega family is a workhorse for industrial control, hobby electronics, and appliance designs where 5V I/O tolerance and low cost matter more than raw processing power. Key features include 32 general purpose I/O lines, two USARTs, a byte-oriented Two-Wire (I2C-compatible) interface, an SPI interface, an 8-channel 10-bit ADC, and three flexible timer/counters with compare modes and PWM. The picoPower technology enables aggressive sleep modes for battery-sensitive designs, while the AVR enhanced RISC instruction set achieves near 1 MIPS/MHz throughput. Architecturally, the device pairs 32 general purpose working registers directly with the ALU, eliminating the accumulator bottleneck of classic 8-bit MCUs. Read-while-write Flash allows self-programming for bootloaders, and In-System Programming (ISP) via SPI simplifies production programming without removing the chip. Typical applications include industrial automation nodes, HVAC and appliance control, sensor acquisition systems using the 10-bit ADC, and embedded designs requiring dual UART ports for modem and debug links. A key design consideration is that this 5V part runs at 20 MHz only at 4.5V-5.5V; at lower VCC the maximum clock frequency derates per the datasheet frequency-versus-voltage curve. This page synthesizes distributor pricing, drop-in family alternatives (ATMEGA324PA, ATMEGA324PB, ATMEGA644P), pinout data, and practical design notes not found in a single manufacturer source.

견적 요청 문의하기

ATMEGA324P-20AUR

ATMEGA324P-20AUR - 8-Bit AVR MCU 32KB 20MHz | Microchip

The Microchip Technology ATMEGA324P-20AUR is an 8-bit AVR RISC microcontroller with 32 KB ISP Flash, 1 KB EEPROM, 2 KB SRAM, 32 general-purpose I/O lines, and a 20 MHz maximum clock, supplied in a 44-pin TQFP (10x10 mm) package. It operates from 4.5 V to 5.5 V and is rated for the industrial temperature range of -40C to +85C. An AVR microcontroller is a single-chip embedded controller built on a modified Harvard RISC architecture that executes most instructions in a single clock cycle. Within the product taxonomy it sits at AVR MCU -> 8-bit microcontroller -> microcontroller (MCU) -> embedded processor -> semiconductor. The ATmega324P family is the picoPower generation of the classic ATmega32 line, adding a real-time counter, a JTAG interface, and byte-oriented two-wire serial interface while retaining the 131-instruction AVR core. Key differentiators include 32 KB of self-programmable Flash with read-while-write support, 1 KB of EEPROM for non-volatile parameter storage, 2 KB of SRAM, and a rich peripheral set: two USARTs, an SPI master/slave, a byte-oriented TWI (I2C) interface, three flexible timer/counters with compare modes and PWM, and an 8-channel 10-bit ADC. The picoPower design keeps active current low and supports six sleep modes, making the device suitable for battery-backed and always-on control applications. The ATmega324P is fabricated on Microchip's high-endurance Flash process, guaranteeing 10,000 write/erase cycles for Flash and 100,000 cycles for EEPROM. In-system programming is supported through SPI, JTAG, or a bootloader, and the on-chip debug system allows real-time emulation without an external emulator pod. Typical applications include industrial control panels, building automation nodes, motor control front-ends, battery chargers, handheld instruments, and legacy ATmega32 redesigns where additional USART and timer resources are required. The 44-pin TQFP footprint is shared with the ATmega164P and ATmega644P, allowing memory scaling without PCB changes. When designing with this device, decouple every VCC pin with a 100 nF ceramic capacitor placed within a few millimeters of the pin, and keep the AREF pin bypassed with 100 nF plus 10 uF when the ADC is used. The 20 MHz rating requires VCC at or above 4.5 V; derate the clock to 10 MHz for 2.7 V operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, replacement, and layout decisions.

견적 요청 문의하기

ATMEGA324P-20MQ

ATMEGA324P-20MQ - 8-bit AVR MCU 32KB 20MHz VQFN-44 | Microchip

The Microchip Technology ATMEGA324P-20MQ is a picoPower 8-bit AVR RISC microcontroller with 32 KB ISP Flash, 1 KB EEPROM, 2 KB SRAM, 32 general-purpose I/O lines and 20 MHz maximum clock speed, housed in a 44-pin VQFN (7x7 mm) exposed-pad package operating from 5V. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory and peripherals on one die. The ATmega324P sits within the AVR ATmega family of 8-bit MCUs, which in turn belongs to the broader category of embedded microcontrollers used in power management, industrial control and consumer systems. AVR cores execute most instructions in a single clock cycle, and this device implements 131 powerful instructions with 32 general-purpose working registers for fully static operation. Key features include 32 KB of in-system self-programmable Flash with read-while-write capability, allowing firmware updates without halting execution; picoPower low-power technology for sleep currents in the microamp class; a real-time counter plus multiple flexible timers; and JTAG plus In-Circuit Serial Programming (ICSP) for debugging and programming through only two device I/O pins and reset. Throughput is approximately 20 MIPS at the full 20 MHz clock. Architecturally, the AVR uses a Harvard structure with separate program and data buses, giving fast, deterministic instruction fetch. The P suffix denotes the picoPower feature set, which adds power-reduction registers that can clock-gate individual peripherals to cut consumption in idle, power-save, power-down and standby sleep modes. Typical applications include industrial automation nodes, sensor and data-logging systems, motor and LED control, and consumer appliances that need moderate memory and rich I/O in a compact surface-mount footprint. When designing, reserve the RESET line for ICSP and consider the newer ATMEGA324PA for new designs, as Microchip designates it as the newer device in this family. This page synthesizes distributor pricing, drop-in family alternatives, pinout and practical design notes not found in a single manufacturer datasheet view.

견적 요청 문의하기

ATMEGA324P-20MQR

ATMEGA324P-20MQR - 8-Bit AVR MCU 20MHz 32KB Flash | Microchip

The Microchip Technology ATMEGA324P-20MQR is a high-performance picoPower 8-bit AVR RISC microcontroller with 32 KB ISP Flash memory, 1 KB EEPROM, 2 KB SRAM and 20 MHz maximum operating frequency, housed in a 44-pin VQFN (7x7 mm) package with exposed pad. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, non-volatile program memory, RAM, and peripherals such as timers, UARTs and ADCs into one chip. The ATmega family sits within the broader hierarchy of 8-bit RISC microcontrollers, which are widely used where deterministic, low-power embedded control is required. AVRs execute most instructions in a single clock cycle, delivering high code efficiency for their class. Key features of this device include 32 general purpose I/O lines, 32 general purpose working registers, read-while-write Flash for in-system programming, a real time counter, and the picoPower technology suite for low sleep-mode consumption. The AVR core achieves near 20 MIPS throughput at 20 MHz, and three flexible timer/counters with compare modes support PWM generation and precise event timing. Architecturally, the AVR uses a Harvard structure with separate program and data buses, allowing simultaneous Flash and SRAM access. In-system self-programming enables boot-loader firmware updates in the field, while the JTAG interface supports boundary scan, on-chip debug, and programming on the 44-VQFN package. Typical applications include industrial automation controllers, consumer appliances, and battery-operated instrumentation, where the combination of 32 KB Flash, rich peripherals and picoPower sleep modes fits both cost-sensitive and power-sensitive designs. Design consideration: the 44-VQFN exposed pad must be soldered to a grounded PCB land pattern for reliable thermal and electrical performance; verify the Flash clock constraints between 4.5 V and 5.5 V supply domains in the manufacturer datasheet before finalizing the crystal selection. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기

하위 카테고리

제품 (35,000+)

ATMEGA3209-AFR - 8-bit AVR 20MHz 32KB Flash MCU | Microchip

ATMEGA3209-AU - 8-bit AVR MCU 32KB 20MHz TQFP-48 | Microchip

ATMEGA3209-AUR - 20MHz 32KB AVR MCU, TQFP-48 | Microchip

ATMEGA3209-MF - 8-Bit AVR MCU 20MHz 32KB QFN-48 | Microchip

ATMEGA3209-MU - 32KB AVR 8-Bit MCU 20MHz 48-QFN | Microchip

ATMEGA323-8AC - 8MHz AVR MCU 32KB Flash TQFP-44 | Microchip

ATMEGA323-8PC - 8-Bit AVR MCU, 32KB Flash, 8MHz | Atmel

ATMEGA323-8PI - 8-bit AVR MCU 32KB Flash 8MHz DIP-40 | Microchip

ATMEGA323L-4AI - 8-bit AVR MCU 32KB 4MHz TQFP-44 | Microchip

ATMEGA323L-4PC - 8-bit AVR MCU 32KB Flash 4MHz DIP-40 | Microchip

ATMEGA324A-AU - AVR MCU 32KB Flash 20MHz TQFP-44 | Microchip

ATMEGA324A-CUR - 8-bit AVR MCU 32KB Flash 20MHz | Microchip

ATMEGA324A-MCHR - 8-bit AVR MCU 32KB Flash 20MHz VQFN-44 | Microchip

ATMEGA324A-MU - 8-bit AVR MCU 32KB Flash 20MHz | Microchip

ATMEGA324P-15AT - 8-bit AVR MCU, 32KB Flash 44-TQFP | Microchip

ATMEGA324P-15AT1 - 8-Bit AVR MCU 16MHz 32KB Flash | Microchip

ATMEGA324P-15MT - 8-bit AVR MCU 16MHz 32KB Flash VQFN-44 | Microchip

ATMEGA324P-15MT1 - 8-bit AVR MCU 32KB 44-QFN | Microchip

ATMEGA324P-15MZ - 8-Bit AVR MCU 16MHz 32KB Flash | Microchip

ATMEGA324P-20AQR - 8-bit AVR MCU, 32KB Flash, 20MHz | Microchip

ATMEGA324P-20AU - 8-bit AVR MCU 20MHz 32KB Flash | Microchip

ATMEGA324P-20AUR - 8-Bit AVR MCU 32KB 20MHz | Microchip

ATMEGA324P-20MQ - 8-bit AVR MCU 32KB 20MHz VQFN-44 | Microchip

ATMEGA324P-20MQR - 8-Bit AVR MCU 20MHz 32KB Flash | Microchip