집적 회로

하위 카테고리

📁 ADC/DAC 3,100+ 제품 📁 증폭기 IC 1,900+ 제품 📁 오디오 코덱 18 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 660+ 제품 📁 Comparator ICs 1 제품 📁 DSP 1,100+ 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 7,300+ 제품 📁 인터페이스 IC 3,300+ 제품 📁 LED 드라이버 1 제품 📁 로직 IC 460+ 제품 📁 메모리 IC 870+ 제품 📁 마이크로컨트롤러 20,000+ 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 14 제품

제품 (39,000+)

MSP430FR5994 - 16MHz 256KB FRAM MCU with LEA | TI
MSP430FR5994

MSP430FR5994 - 16MHz 256KB FRAM MCU with LEA | TI

The Texas Instruments MSP430FR5994 is a 16-bit ultra-low-power microcontroller operating at up to 16 MHz, with 256KB of non-volatile FRAM memory, 8KB of SRAM, a Low-Energy Accelerator (LEA) coprocessor for DSP-style math, and a 64-pin LQFP (10x10 mm) package option. A microcontroller (MCU) is a single-chip embedded computer combining a processor core, memory, and peripherals. The MSP430FR5994 belongs to the 16-bit MCU class, within the broader family of microcontrollers and embedded processors, and sits in TI's MSP430 FRAM platform - a product line that replaces flash memory with ferroelectric RAM for faster, lower-power, and far more durable writes in a unified non-volatile memory architecture. Key differentiating features include the LEA (Low-Energy Accelerator), which TI states delivers up to 40x the DSP performance of Arm Cortex-M0+ class cores for functions such as FFT, FIR filtering, and matrix multiplication, without requiring DSP expertise. The 256KB FRAM supports memory writes at very low energy compared to flash, and the device integrates a 12-bit ADC, comparator, DMA, AES accelerator, and UART/SPI/I2C serial interfaces, plus multiple 16-bit timers. Architecturally, the MSP430FR5994 uses the MSP430 CPUXV2 16-bit RISC core, a hallmark of the lowest-power MCU technology platform on the market. The unified FRAM memory allows code and data to coexist in non-volatile storage, enabling in-application software updates and rapid data logging. Typical applications include battery-powered metering, portable medical and sensor-monitoring equipment, industrial sensing nodes, and edge signal-processing tasks where LEA-accelerated FFT and FIR computation offloads the main CPU. A key design consideration: FRAM writes consume far less energy than flash programming, but designers should still manage the unified memory map carefully when partitioning persistent data segments. This page synthesizes distributor availability data, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
MSP430FR59941IPM - 16MHz 256KB FRAM MCU | TI
MSP430FR59941IPM

MSP430FR59941IPM - 16MHz 256KB FRAM MCU | TI

The Texas Instruments MSP430FR59941IPM is a 16-bit MSP430FR FRAM microcontroller running at up to 16 MHz with 256KB non-volatile FRAM, 8KB SRAM, and a Low-Energy Accelerator (LEA) DSP coprocessor, housed in a 64-pin LQFP (PM) package measuring 10x10 mm and rated from -40C to +85C. A FRAM (Ferroelectric RAM) microcontroller is a class of mixed-signal MCU that replaces conventional flash program memory with ferroelectric memory, a technology that combines the non-volatility of flash with the write speed and endurance of SRAM. Within the power-management hierarchy of embedded systems, the MCU sits at the center of the signal chain, controlling sensors, interfaces, and power modes; FRAM MCUs occupy the low-power embedded processing tier, below application processors and above simple 8-bit controllers. Key differentiating features include 256KB of FRAM unified memory with unlimited write endurance in practice and uniform 128-byte write granularity, the LEA hardware accelerator that offloads vector math such as FFTs and FIR filters from the CPU at a fraction of the energy, a hardware AES256 cryptographic accelerator, and a 12-bit SAR ADC. The peripheral set also includes comparators, DMA, four eUSCI serial interfaces (UART/SPI/I2C), and 68 I/O lines made available through TI's port mapping architecture. Architecturally, the device uses the MSP430 CPUXV2 RISC core with 16-bit instructions, a flexible clock system (VLO, REFO, DCO, and external LFXT/HFXT sources), and multiple low-power modes (LPM0-LPM4.5) that let the MCU spend most of its life in sub-microamp sleep states. The FRAM write mechanism requires no erase cycle, so data logging writes are roughly 100x faster and far lower energy than flash-based writes. Typical applications include battery-powered metering and data logging, portable medical monitoring, sensor-fusion nodes performing DSP pre-processing via LEA, and secure connected endpoints using the AES256 engine. Designers should note that FRAM read timing is fast but the maximum system frequency of 16 MHz requires wait-state management for FRAM access above 8 MHz, and the LQFP-64 PM package needs a solid DVSS/DVCC decoupling network per TI's layout guidance. This page synthesizes distributor pricing, same-family drop-in alternatives, pinout guidance, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
MSP430FR59941IZVWR - 16MHz 256KB FRAM MCU 87-NFBGA | Texas Instruments
MSP430FR59941IZVWR

MSP430FR59941IZVWR - 16MHz 256KB FRAM MCU 87-NFBGA | Texas Instruments

The Texas Instruments MSP430FR59941IZVWR is a 16-bit MSP430FR59xx FRAM microcontroller running at 16 MHz with 256KB of FRAM nonvolatile memory, 8KB of SRAM, and a hardware Low-Energy Accelerator (LEA) for digital signal processing, housed in an 87-pin NFBGA (ZVW) 6x6 mm ball grid array package. It integrates a 12-bit ADC, comparator, DMA controller, AES cryptographic accelerator, and up to 68 general-purpose I/O lines with eUSCI serial communication modules. A FRAM (ferroelectric random access memory) microcontroller is a class of MCU in which program flash is replaced by ferroelectric memory, a technology that combines the nonvolatility of flash with the write speed, endurance, and ultra-low write energy of RAM. Within the power management hierarchy of embedded systems, FRAM MCUs occupy the extreme low-power end, enabling energy harvesting and battery designs that conventional flash MCUs cannot match. Key features include the LEA vector math accelerator, which offloads FFT, FIR, and matrix operations from the CPU at a fraction of the energy, and the AES256 accelerator for secure IoT deployments. FRAM writes at full 16 MHz speed with 10^15 cycle endurance, eliminating flash erase-before-write delays and enabling in-system data logging. Operating voltage spans 1.8V to 3.6V with active-mode currents in the microampere-per-MHz class and multiple low-power modes (LPM3.5/4.5) for battery designs. The CPUXV2 16-bit RISC core executes MSP430 instructions with a modernized pipeline. Peripherals include four eUSCI modules supporting UART, SPI, and I2C, a 12-channel DMA, a real-time clock, and a flexible clock system with DCO, LFXT, and HFXT sources. Typical applications include battery-powered metering, portable medical monitoring, energy harvesting sensor nodes, and secure IoT edge devices requiring cryptographic key storage and long battery life. Design consideration: the 87-NFBGA (0.8 mm ball pitch, 6x6 mm) demands careful PCB stack-up; escape routing typically requires a dedicated inner signal layer, and X-ray inspection is recommended for assembly. This page adds distributor pricing, drop-in alternative analysis, and layout guidance not found in the TI datasheet.

견적 요청 문의하기
MSP430FR59941REV - 16MHz 256KB FRAM MCU with LEA | TI
MSP430FR59941REV

MSP430FR59941REV - 16MHz 256KB FRAM MCU with LEA | TI

The Texas Instruments MSP430FR59941REV is a 16-bit MSP430FR microcontroller (MCU) built on the MSP430 CPUXV2 core, running at up to 16 MHz with 256KB of non-volatile FRAM, 8KB of SRAM, and an integrated Low-Energy Accelerator (LEA) for digital signal processing. The device integrates AES hardware acceleration, a 12-bit ADC, comparators, DMA, 68 general-purpose I/O pins, and multiple eUSCI serial interfaces. FRAM (ferroelectric random access memory) is a non-volatile memory technology that combines the speed and low power of SRAM with the endurance and retention of Flash. In the power-management hierarchy, the MSP430FR59941 sits within the MSP430FR599x mixed-signal MCU family, part of TI's ultra-low-power MSP430 portfolio for embedded control and sensing applications. Key differentiating features include the LEA coprocessor, which TI states delivers 40x the signal-processing performance of Arm Cortex-M0+ MCUs for FFT, FIR, and matrix multiplication, without requiring DSP expertise. The 256KB FRAM enables large data logging with unlimited write endurance in practice, while the 12-bit ADC and AES accelerator support secure, precision sensing. Architecturally, the CPUXV2 16-bit RISC core pairs with the LEA vector engine, and FRAM is accessed at full speed, removing the erase-before-write penalties of Flash MCUs. Multiple low-power modes allow active currents in the microamp-per-MHz class, a hallmark of the MSP430 line. Typical applications include smart metering and energy monitoring, industrial sensor front ends with FFT-based analytics, secure IoT sensor nodes using the AES engine, and portable medical devices. Design consideration: FRAM requires no external programming voltage and survives power loss mid-write, but designers should verify the package and pinout details of the REV suffix ordering code directly against the MSP430FR599x datasheet before layout. This page synthesizes verified distributor listings, same-family drop-in alternatives, and practical design notes beyond what a single datasheet page provides.

견적 요청 문의하기
MSP430FR5994IPMR - 16MHz 256KB FRAM MCU | Texas Instruments
MSP430FR5994IPMR

MSP430FR5994IPMR - 16MHz 256KB FRAM MCU | Texas Instruments

The Texas Instruments MSP430FR5994IPMR is a 16-bit ultra-low-power microcontroller based on the MSP430 CPUXV2 RISC core running at up to 16 MHz, integrating 256KB of FRAM non-volatile memory, 8KB of SRAM, a Low-Energy Accelerator (LEA) DSP engine, an AES256 accelerator, a 12-bit ADC, comparators, DMA, and UART/SPI/I2C serial interfaces in a 64-pin LQFP (10x10 mm, PM suffix) package. A microcontroller (MCU) is a single-chip embedded processor that combines a CPU core, memory, and peripherals on one die, sitting at the device level of the embedded-systems hierarchy (MCU -> embedded processor -> semiconductor). The MSP430FR599x family belongs to the MSP430 FRAM series, which replaces flash with ferroelectric RAM: FRAM offers fast, low-power writes, unified program and data memory, and very high write endurance, making it one of the lowest-power MCU memory technologies available. Key differentiators include the Low-Energy Accelerator (LEA), a hardware signal-processing engine that TI states delivers up to 40x the performance of Arm Cortex-M0+ MCUs on functions such as FFT, FIR filtering, and matrix multiplication, without requiring DSP expertise. The integrated AES256 accelerator secures IoT connectivity, and multiple low-power modes (LPM) extend battery life in always-on sensing applications. Architecturally, the 16-bit CPUXV2 core offloads vector math to LEA via the DMA controller, keeping the CPU in sleep while signal processing proceeds. FRAM is byte-writable with no sector-erase penalty, which simplifies data logging and over-the-air firmware updates. Typical applications include battery-powered sensor nodes, building automation and electronic metering, portable medical devices, and edge signal-conditioning nodes that need FFT/FIR processing at minimal energy cost. Design tip: partition FRAM deliberately - the unified memory allows constants in information segments, but code/data segmentation and write-endurance budgeting should follow TI's FRAM guidance in the MSP430FR599x, MSP430FR596x Mixed-Signal Microcontrollers datasheet (Rev. D). This page adds value beyond the datasheet by synthesizing drop-in alternatives (MSP430FR5989IPMR, MSP430FR59941IPM and related family parts), pricing context as of 2026-09-03, and practical design notes in one place.

견적 요청 문의하기
MSP430FR5994IPNR - 16MHz 256KB FRAM MCU | Texas Instruments
MSP430FR5994IPNR

MSP430FR5994IPNR - 16MHz 256KB FRAM MCU | Texas Instruments

The Texas Instruments MSP430FR5994IPNR is a 16-bit ultra-low-power FRAM microcontroller running at 16 MHz with 256KB of FRAM nonvolatile memory, 8KB of SRAM, and an integrated Low-Energy Accelerator (LEA) for signal processing, housed in an 80-pin LQFP (12x12 mm) package. FRAM (ferroelectric random access memory) is a nonvolatile memory technology that combines the speed and low power of SRAM-like writes with the data retention of flash. In a microcontroller system hierarchy, the MSP430FR5994 sits within the broader family of mixed-signal MCUs, occupying the memory-and-signal-processing tier of the MSP430FR599x series, which targets battery-powered and energy-harvesting applications that require both large nonvolatile memory and mathematical computation. Key differentiating features include the LEA (Low-Energy Accelerator), a vector math coprocessor that offloads FFT, FIR, and matrix operations from the CPU while the core remains in a low-power state; hardware AES cryptography for secure data handling; a 12-bit ADC and analog comparator for sensing front ends; and direct memory access (DMA) for peripheral-to-memory transfers without CPU intervention. FRAM offers 100x faster writes than flash with inherently low write energy and virtually unlimited write endurance. Architecturally, the MSP430 CPUXV2 16-bit RISC core is paired with multiple low-power modes, enabling active currents in the microamp-per-MHz class while retaining RAM and peripheral state. The unified FRAM memory allows flexible partitioning between code and data, and the MPU (memory protection unit) can segment FRAM into protected regions for bootloader and data-logging designs. Typical applications include portable medical and health monitoring devices, building and factory sensor nodes, energy metering front ends, and battery-powered signal processing where the LEA accelerates FFT-based vibration or acoustic analysis. A key design consideration is the FRAM write protection scheme: configure the MPU segments early in development to prevent accidental data corruption, and respect the maximum operating frequency versus supply voltage relationship documented in the manufacturer datasheet. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
MSP430FR5994IRGZR - 16MHz 256KB FRAM MCU | TI | Low Power
MSP430FR5994IRGZR

MSP430FR5994IRGZR - 16MHz 256KB FRAM MCU | TI | Low Power

The Texas Instruments MSP430FR5994IRGZR is a 16-bit RISC microcontroller based on the MSP430 CPUXV2 core running at 16 MHz, featuring 256KB of unified FRAM memory, 8KB of SRAM, and a Low-Energy Accelerator (LEA) for signal processing, housed in a 48-pin VQFN (7x7 mm) package. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one chip, forming the lowest layer of the embedded-systems hierarchy: semiconductor -> microcontroller -> embedded system. The MSP430FR5994 belongs to the MSP430 FRAM family of ultra-low-power mixed-signal microcontrollers, where ferroelectric RAM replaces flash to combine non-volatility with fast, low-energy writes. Key differentiating features include FRAM unified memory with 256KB capacity that writes up to 100x faster than flash with far lower energy per byte, the LEA coprocessor delivering up to 40x the DSP performance of Arm Cortex-M0+ cores for FFT, FIR, and matrix operations without requiring DSP expertise, hardware AES encryption, a 12-bit ADC, analog comparators, DMA, and UART/SPI/I2C serial interfaces plus multiple timers. Technically, the FRAM architecture eliminates the erase-before-write penalty of flash, enabling true infinite-endurance data logging and instant software updates. The CPUXV2 16-bit RISC core emphasizes low active power, making the family suitable for battery-powered sensing where every microamp matters. The LEA offloads vector math from the CPU, cutting both execution time and energy per operation in edge signal-processing workloads. Typical applications include portable medical monitoring, industrial sensor nodes, battery-powered metering, and edge signal-conditioning systems that perform FFT or filtering on-chip. The combination of large non-volatile memory and a math accelerator fits data-logging and vibration-sensing designs particularly well. Design consideration: FRAM memory write operations are fast, but code must account for wait states at higher frequencies; use TI's driver library and the MSP430FR599x family datasheet for timing details. This page synthesizes distributor availability, family drop-in alternatives, and practical design guidance not found in a single manufacturer datasheet.

견적 요청 문의하기
MSP430FR5994IZVW - 16MHz 256KB FRAM MCU, NFBGA-87 | TI
MSP430FR5994IZVW

MSP430FR5994IZVW - 16MHz 256KB FRAM MCU, NFBGA-87 | TI

The Texas Instruments MSP430FR5994IZVW is a 16-bit ultra-low-power MSP430 FRAM microcontroller featuring a 16 MHz CPUXV2 RISC core, 256KB of non-volatile FRAM memory, 8KB of SRAM, and an integrated Low-Energy Accelerator (LEA) for digital signal processing, housed in an 87-ball NFBGA (6x6 mm) package. An FRAM (ferroelectric random access memory) microcontroller is a class of mixed-signal MCU that replaces traditional flash program memory with ferroelectric RAM. FRAM offers byte-writable, non-volatile storage with dramatically faster write speeds, near-zero write energy, and essentially unlimited endurance compared to flash, making FRAM MCUs part of the broader power-management-focused, low-power semiconductor hierarchy. The MSP430 family pioneered this category and remains its most widely adopted representative. Key differentiating features of the MSP430FR5994 include the LEA vector coprocessor, which TI states delivers up to 40x the DSP performance of Arm Cortex-M0+ MCUs for functions such as FFT, FIR filtering, and matrix multiplication; hardware AES cryptographic acceleration; a 12-bit SAR ADC; an integrated comparator; a multi-channel DMA controller; and eUSCI serial peripherals supporting UART, SPI, and I2C. Multiple 16-bit timers enable motor control, capture/compare, and PWM applications with very low active and standby power consumption. Architecturally, the device is based on the MSP430 CPUXV2 core with unified FRAM program and data storage, allowing flexible memory partitioning under software control via the Memory Protection Unit (MPU). The LEA offloads block-based DSP math from the CPU, freeing cycles for application logic while operating in low-power modes. Typical applications include battery-powered metering and sensing nodes, industrial sensor front ends requiring FFT-based vibration or acoustic analysis, portable medical monitoring devices, and IoT edge endpoints where ultra-low standby power and long battery life are mandatory. A key design consideration is FRAM write protection: configure the MPU segment boundaries early in development to protect persistent data structures from firmware updates. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
MSP430FR6989IPZ - 16-bit ULP FRAM MCU 128KB | TI LQFP-100
MSP430FR6989IPZ

MSP430FR6989IPZ - 16-bit ULP FRAM MCU 128KB | TI LQFP-100

The Texas Instruments MSP430FR6989IPZ is a 16-bit ultra-low-power MSP430 FRAM microcontroller with 128KB of embedded FRAM, an extended scan interface (ESI), hardware AES-128 accelerator, and an integrated LCD driver, housed in a 100-pin LQFP (PZ) package. It operates from a 16 MHz MSP430 CPUXV2 core with a 1.8 V to 3.6 V supply and is rated for the -40 C to +85 C industrial temperature range. An FRAM-based microcontroller is a mixed-signal MCU whose non-volatile memory uses Ferroelectric RAM rather than flash. FRAM delivers nearly unlimited write endurance (roughly 100x more than flash), faster unified-memory writes at low energy, and a simpler software model because code and data share one address space. The MSP430 FRAM platform combines this memory with TI's holistic ultra-low-power system architecture, allowing designers to log data or run frequent writes without the wear-budget anxiety associated with flash. In the broader hierarchy, this device is a microcontroller -> embedded MCU -> mixed-signal SoC -> semiconductor. Key specifications include 128 KB of non-volatile FRAM, 2 KB of information FRAM, 16 KB of SRAM, a 12-bit SAR ADC with up to 16 channels, four 16-bit timers, up to 83 GPIO pins, a real-time clock, and a 320-segment LCD driver. The integrated extended scan interface is purpose-built for liquid flow-meter rotary sensing, while the AES-128 hardware accelerator supports encrypted metering and secure connectivity. The MSP430FR6989IPZ leverages TI's MSP430 CPUXV2 architecture with active current of approximately 118 uA/MHz and standby current under 1 uA with RTC retention, enabling multi-year battery life in metering and sensor applications. The unified FRAM memory can be partitioned at runtime between code and data, simplifying field firmware updates and over-the-air data logging. Built-in BSL and JTAG/SBW interfaces simplify in-system programming. Typical applications include water, heat, and gas flow meters with rotary sensing, portable medical and industrial sensor loggers, secure battery-powered IoT endpoints, e-paper / LCD human-machine interfaces, and energy-harvesting wireless sensor nodes where its ultra-low-power modes and FRAM endurance deliver measurable system-level advantages. When designing with this MCU, allocate the FRAM memory between code and data carefully - because writes are nearly instantaneous and unlimited, data-logging applications can reserve large blocks for circular buffers, but be sure to budget enough FRAM for firmware images so that in-field updates remain possible. This page synthesizes distributor pricing, parametric alternatives, and practical design guidance that are not aggregated on any single manufacturer or distributor datasheet page.

견적 요청 문의하기
MSP430G2210ID - 16MHz MCU, 2KB Flash, 128B SRAM | Texas Instruments (Tape & Reel)
MSP430G2210ID

MSP430G2210ID - 16MHz MCU, 2KB Flash, 128B SRAM | Texas Instruments (Tape & Reel)

The Texas Instruments MSP430G2210ID is a 16-bit mixed-signal microcontroller from the MSP430G2xx Value-Series, operating at up to 16 MHz with 2 KB Flash and 128 B SRAM, housed in an 8-pin SOIC (D) package. It features an integrated low-power comparator, a 16-bit timer, and four general-purpose I/O pins, making it well-suited for ultra-low-cost embedded applications. The device operates from a 1.8 V to 3.6 V supply and supports ultra-low power consumption across five power-saving modes. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package. The MSP430 family specifically uses a 16-bit von Neumann RISC architecture, optimized for ultra-low power operation and mixed-signal applications. Within the broader taxonomy, the MSP430G2xx Value-Series targets cost-sensitive applications that still require the low-power signature of the MSP430 platform, sitting between simple 8-bit MCUs and higher-end ARM Cortex-M0 parts in capability and price. Key features of the MSP430G2210ID include active-mode current of 220 µA at 1 MHz (2.2 V), standby current of 0.5 µA, off-mode RAM retention current of 0.1 µA, and an ultra-fast wake-up from standby mode of less than 1 µs. The integrated brownout detector and on-chip internal oscillator simplify BOM cost by eliminating external clock or voltage supervisor components in cost-sensitive designs. The device is supported by TI's MSP430 LaunchPad ecosystem, free Code Composer Studio IDE, and a broad library of application notes covering ultra-low power design patterns. The MSP430G2210ID uses the MSP430 CPU16 core, which combines a 16-bit RISC instruction set with a 16-bit data path, 16 registers, and a constant generator for maximum code density. Program memory is in-system programmable Flash with 2 KB total (approximately 2K x 8 plus 256 B information memory), and the 128 B RAM supports data and stack operations. The internal digitally-controlled oscillator (DCO) provides the 16 MHz maximum clock without external crystals, and the on-chip comparator can wake the CPU from LPM4 with no external components. Typical applications include battery-powered sensor nodes, smoke detectors, remote controls, smart metering, handheld instruments, toys, and any cost-sensitive embedded system requiring ultra-low standby current. The 8-pin SOIC footprint is friendly for hand-soldering and hobbyist prototyping as well as high-volume SMT manufacturing lines. When designing with this device, ensure the supply voltage stays within 1.8 V to 3.6 V and respect absolute maximum ratings on I/O pins to avoid latch-up. The four GPIO pins are multiplexed with the comparator, timer, and JTAG functions; verify pin allocation against the desired peripheral mix before finalizing the schematic. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers select and source the MSP430G2210ID with full context.

견적 요청 문의하기
MSP430G2210IDR - 16MHz MCU, 2KB Flash, 128B SRAM | Texas Instruments
MSP430G2210IDR

MSP430G2210IDR - 16MHz MCU, 2KB Flash, 128B SRAM | Texas Instruments

The Texas Instruments MSP430G2210IDR is a 16-bit mixed-signal microcontroller from the MSP430G2xx Value-Series, operating at up to 16 MHz with 2 KB Flash and 128 B SRAM, housed in an 8-pin SOIC (D) package. It features an integrated low-power comparator, a 16-bit timer, and four general-purpose I/O pins, making it well-suited for ultra-low-cost embedded applications. The device operates from a 1.8 V to 3.6 V supply and supports ultra-low power consumption across five power-saving modes. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package. The MSP430 family specifically uses a 16-bit von Neumann RISC architecture, optimized for ultra-low power operation and mixed-signal applications. Within the broader taxonomy, the MSP430G2xx Value-Series targets cost-sensitive applications that still require the low-power signature of the MSP430 platform, sitting between simple 8-bit MCUs and higher-end ARM Cortex-M0 parts in capability and price. Key features of the MSP430G2210IDR include active-mode current of 220 µA at 1 MHz (2.2 V), standby current of 0.5 µA, off-mode RAM retention current of 0.1 µA, and an ultra-fast wake-up from standby mode of less than 1 µs. The integrated brownout detector and on-chip internal oscillator simplify BOM cost by eliminating external clock or voltage supervisor components in cost-sensitive designs. The device is supported by TI's MSP430 LaunchPad ecosystem, free Code Composer Studio IDE, and a broad library of application notes covering ultra-low power design patterns. The MSP430G2210IDR uses the MSP430 CPU16 core, which combines a 16-bit RISC instruction set with a 16-bit data path, 16 registers, and a constant generator for maximum code density. Program memory is in-system programmable Flash with 2 KB total (approximately 2K x 8 plus 256 B information memory), and the 128 B RAM supports data and stack operations. The internal digitally-controlled oscillator (DCO) provides the 16 MHz maximum clock without external crystals, and the on-chip comparator can wake the CPU from LPM4 with no external components. Typical applications include battery-powered sensor nodes, smoke detectors, remote controls, smart metering, handheld instruments, toys, and any cost-sensitive embedded system requiring ultra-low standby current. The 8-pin SOIC footprint is friendly for hand-soldering and hobbyist prototyping as well as high-volume SMT manufacturing lines. When designing with this device, ensure the supply voltage stays within 1.8 V to 3.6 V and respect absolute maximum ratings on I/O pins to avoid latch-up. The four GPIO pins are multiplexed with the comparator, timer, and JTAG functions; verify pin allocation against the desired peripheral mix before finalizing the schematic. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers select and source the MSP430G2210IDR with full context.

견적 요청 문의하기
MSP430G2230ID - 16MHz Low-Power MCU with 10-Bit ADC
MSP430G2230ID

MSP430G2230ID - 16MHz Low-Power MCU with 10-Bit ADC

The Texas Instruments MSP430G2230ID is a 16 MHz mixed-signal microcontroller with 2 KB of Flash memory, 256 bytes of SRAM, and a 10-bit ADC in an 8-pin SOIC package. Its supply range is 1.8 V to 3.6 V, while integrated SPI, I2C, and timer peripherals support compact sensing, control, and communication designs. A mixed-signal microcontroller combines a digital processor with analog measurement and interface functions on one integrated circuit. The MSP430 family belongs to the embedded microcontroller category within integrated circuits. Its 16-bit RISC architecture, 16-bit registers, and low-power operating modes make it suitable for portable measurement and control systems where energy efficiency, deterministic control, and compact peripheral integration are important. Key features include operation up to 16 MHz, 2 KB of Flash program memory, 256 bytes of SRAM, and a 10-bit analog-to-digital converter. The device also provides SPI and I2C communication interfaces, timer resources, and five power-saving modes. Active-mode current is listed as 220 uA at 1 MHz and 2.2 V, while standby current is 0.5 uA and off-mode current with RAM retention is 0.1 uA. The MSP430G2230ID is designed for low-power embedded control. Its 10-bit ADC allows analog sensor signals to be digitized without a separate converter, while SPI and I2C permit connection to external transducers, memory, or remote sensing nodes. The 256-byte SRAM supports small working data sets, and the 2 KB Flash area accommodates compact firmware for dedicated control tasks. Typical uses include portable environmental measurement, battery-powered instrumentation, low-cost sensor nodes, industrial process monitoring, and compact consumer controls. The 8-pin SOIC package also simplifies assembly where a through-hole-compatible surface-mount footprint is preferable to a very small QFN package. When designing the power supply, verify that each rail remains within 1.8 V to 3.6 V and account for the input-voltage range of every attached peripheral. Place the device close to its decoupling network, preserve a short analog-signal path to the ADC input, and follow the recommended external-circuitry and grounding guidance in the manufacturer datasheet. This product summary combines the manufacturer specifications with engineering-focused guidance for low-power firmware development, analog acquisition, serial connectivity, and PCB implementation. It is intended to help engineers identify whether the MSP430G2230ID provides the required memory, conversion capability, interfaces, package, and operating characteristics for a compact embedded design.

견적 요청 문의하기
MSP430G2553CY - 16MHz 16KB Flash Mixed-Signal MCU | TI
MSP430G2553CY

MSP430G2553CY - 16MHz 16KB Flash Mixed-Signal MCU | TI

Texas Instruments MSP430G2553CY is a 16-bit mixed-signal microcontroller operating at 16 MHz, with 16 KB of Flash memory and 512 bytes of SRAM. The device combines a comparator, timers, UART, SPI, and I2C interfaces in a 32-pin QFN package. The supplied ordering information identifies this orderable MPN as a die-sale device, so package-specific mechanical details and production procurement terms must be confirmed with TI before assembly. A mixed-signal microcontroller is an embedded semiconductor that combines a programmable digital controller with analog or sensing functions. In the product hierarchy, this MSP430 belongs to the microcontroller, embedded processor, semiconductor, and mixed-signal controller classes. Its 16-bit MSP430 CPU architecture makes it suitable for compact control systems requiring low power, deterministic peripheral access, and several communication interfaces without a separate analog processor. The verified device information identifies a 16 MHz operating speed, 16 KB Flash, 512 B SRAM, one comparator, UART/SPI/I2C connectivity, and timers. DigChip additionally lists 24 I/O ports, a 3.3 V to 3.6 V supply range, and a 0.1 µA off-mode current with RAM retention. These figures position MSP430G2553CY for low-power sensing, control, instrumentation, and communications designs where memory and integrated interfaces are more important than high-speed digital processing. The MSP430G2xx family architecture is oriented toward low-power embedded control. Its integrated comparator supports threshold-based sensing, while UART, SPI, and I2C support connections to sensors, displays, transceivers, and external nonvolatile memory. The timer resources can provide event timing and periodic service functions, but individual timer channels, capture/compare resources, and interrupt assignments must be selected from the MSP430G2x53 datasheet for the exact die. Typical applications include battery-powered sensor nodes, compact industrial monitors, digital thermometers, environmental measurement systems, motor or actuator controllers, and simple serial gateways. For a new PCB, the CY suffix and die-sale status require careful review: developers should not assume that the QFN-32 package information found in generic listings corresponds to the CY deliverable. Board assembly may instead require the documented die-sale process, bonding method, and package outline. Before layout, confirm the exact pin assignment and exposed-pad requirements in the official MSP430G2x53 datasheet and with TI. Program development commonly uses an MSP430-compatible toolchain, but the verified data does not identify a specific IDE version, debugger, or programming adapter. Power, ground, decoupling, reset, boot-strapping, communication, and exposed-pad connections should therefore follow the authoritative device documentation rather than generic QFN assumptions. This page consolidates verified manufacturer and distributor information, separates die-sale ordering facts from generic family specifications, and identifies unresolved package, pricing, pinout, lifecycle, and compliance details instead of guessing. It is intended as an engineering-data starting point for MSP430G2553CY sourcing and design review, not as a substitute for TI's final orderable datasheet and quality documentation.

견적 요청 문의하기
MSP430G2553IN20 - 16MHz 16KB Flash MCU | Texas Instruments
MSP430G2553IN20

MSP430G2553IN20 - 16MHz 16KB Flash MCU | Texas Instruments

The Texas Instruments MSP430G2553IN20 is a 16 MHz mixed-signal microcontroller with a 16-bit RISC CPU, 16 KB of Flash memory, 512 bytes of SRAM, and integrated analog and serial peripherals in a 20-pin PDIP package. Its operating temperature range is -40°C to 85°C. The device combines five low-power modes with a 10-bit ADC and comparator for portable measurement and embedded control designs. A mixed-signal microcontroller combines a digital processor, analog measurement circuitry, communications interfaces, and timing resources within one device. The MSP430G2553 belongs to the MSP430 family of ultra-low-power microcontrollers and targets applications that require deterministic control, efficient peripheral integration, and low standby consumption. Its architecture supports portable instruments, sensing nodes, data acquisition modules, and small embedded-control systems. Key features include a 16-bit RISC CPU operating at up to 16 MHz, 16 KB of Flash, 512 bytes of SRAM, a 10-bit ADC, an analog comparator, UART, SPI, I²C, and timers. The integrated peripherals reduce external component count and allow compact designs that measure analog inputs while exchanging data with external sensors, displays, or host systems. The manufacturer identifies the device for low-power portable measurement applications. The MSP430 architecture uses 16-bit registers and an interrupt-oriented peripheral model. Its mixed-signal resources support sensor conditioning and threshold comparison without requiring a separate analog processor, while UART, SPI, and I²C interfaces provide paths to external integrated circuits. The 20-pin PDIP package also exposes the device through a conventional through-hole footprint suitable for prototyping, education, and industrial control boards. Typical uses include battery-powered measurement instruments, simple data loggers, environmental sensors, industrial sensing nodes, keypad interfaces, and compact embedded-control products. UART, SPI, or I²C can connect a sensor module or local display, while the ADC and comparator support analog measurement. The MSP430G2553IN20 is also widely used as the target device for MSP430 LaunchPad-style development and educational projects. Designers should verify the exact pin functions and peripheral multiplexing against the manufacturer datasheet before laying out the PCB. Decoupling, grounding, unused-pin handling, clock configuration, and low-power mode sequencing are critical in a compact mixed-signal design. The verified data does not provide a complete pin-level mapping, so pin names and electrical details not explicitly supplied are marked as needed rather than inferred.

견적 요청 문의하기
MSP430G2553IPW0RQ1 - 16MHz Automotive MCU | Texas Instruments
MSP430G2553IPW0RQ1

MSP430G2553IPW0RQ1 - 16MHz Automotive MCU | Texas Instruments

The Texas Instruments MSP430G2553IPW0RQ1 is an automotive 16-bit mixed-signal microcontroller operating at 16 MHz, with 16 KB of Flash memory, 512 B of SRAM, and a 10-bit ADC. It is supplied in a 20-pin TSSOP (PW) package rated for -40°C to +85°C and integrates UART, SPI, I²C, timer, and comparator peripherals. A mixed-signal microcontroller is a semiconductor device that combines a programmable digital controller with analog measurement or signal-conditioning resources. The MSP430 belongs to the MCU → microcontroller → embedded processor → semiconductor hierarchy and is designed for compact, low-power control systems. Its 16-bit CPU16 architecture, on-chip memory, and communication peripherals allow standalone sensing and control without requiring separate memory, ADC, or serial-interface devices. Key device resources include a 16 MHz maximum clock, 16 KB of Flash program memory, 512 B of SRAM, a 10-bit analog-to-digital converter, and an integrated comparator. The MCU supports UART, SPI, and I²C communication, while timer resources support periodic measurement, timing, and control functions. The -40°C to +85°C operating range and automotive qualification make the Q1 device suitable for demanding vehicle electronic modules. The MSP430G2 family architecture combines compact digital processing with mixed-signal measurement. Flash memory retains programmed firmware across power removal, while SRAM supports working variables and stack operations. The ADC provides an integrated path for analog inputs, and the comparator can support threshold detection or basic signal monitoring. Serial interfaces allow the device to communicate with sensors, transceivers, memories, and external controllers. Typical uses include automotive body and sensing modules, battery-powered instrumentation, condition-monitoring controllers, compact data loggers, and low-power industrial controls. The device is especially appropriate where a small TSSOP footprint, mixed-signal integration, and multiple serial interfaces are more valuable than a high-pin-count application processor. Designers should preserve the power, ground, and decoupling layout recommended by the MSP430G2553-Q1 datasheet and verify unused I/O states in the final design. Because automotive qualification, operating-temperature grade, and ordering suffix affect procurement, replacements should be checked for identical package pinout, 16 MHz operation, memory capacity, ADC resolution, and peripheral configuration before substitution. This product page consolidates the verified manufacturer and distributor information for MSP430G2553IPW0RQ1, including package and memory details, current purchasing data, drop-in replacement guidance, comparison parameters, and practical design considerations.

견적 요청 문의하기
MSP430G2553IPW20 - 16MHz 16KB MCU | Texas Instruments
MSP430G2553IPW20

MSP430G2553IPW20 - 16MHz 16KB MCU | Texas Instruments

The Texas Instruments MSP430G2553IPW20 is a 16-bit mixed-signal microcontroller operating at up to 16 MHz, with 16 KB of Flash memory, 512 bytes of SRAM, and a 20-pin TSSOP (PW) package. According to the Texas Instruments product page, the device includes comparator, UART, SPI, I2C, and timer resources for compact embedded control designs. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, input/output ports, and peripherals into one device. The MSP430 belongs to the mixed-signal MCU family, combining digital control with analog comparison capability and low-power operating modes. This makes it useful for embedded products that must measure a signal, control peripherals, communicate with external systems, or operate from limited power budgets. The MSP430G2553IPW20 provides 16 KB of Flash for firmware, 512 bytes of SRAM for working data, and a maximum clock frequency of 16 MHz. Its listed peripherals include a comparator, UART, SPI, I2C, and timer. The supplied distributor and manufacturer snippets identify the industrial temperature range as -40 °C to +85 °C and the package as 20-pin TSSOP (PW). The verified source data does not provide the complete pin-level electrical table, so individual pin functions and several operating-current values remain unverified. The MSP430G2553 platform is suited to low-power embedded control, sensor conditioning, communication bridges, and small control nodes. The comparator can support threshold-based analog supervision, while the serial interfaces allow connection to displays, sensors, transceivers, or storage devices. The 16 MHz CPU class is appropriate for event handling, protocol management, and control logic where deterministic behavior is more important than workstation-class processing. When designing a board around this MCU, verify the device pinout and the detailed electrical limits in the manufacturer datasheet before routing power, programming signals, communication interfaces, and analog inputs. Pay particular attention to decoupling, oscillator configuration, unused pins, programming access, and the selected supply voltage. Firmware and peripheral assignments should also be checked against the exact device variant and package. This page combines the verified Texas Instruments product information with distributor references, application guidance, and procurement considerations. It is intended to help engineers identify the correct MSP430G2553IPW20 for low-power embedded systems while clearly separating confirmed specifications from parameters that still require datasheet confirmation.

견적 요청 문의하기
MSP430G2553IPW20R - 16MHz 16KB MCU | Texas Instruments (Tape & Reel)
MSP430G2553IPW20R

MSP430G2553IPW20R - 16MHz 16KB MCU | Texas Instruments (Tape & Reel)

The Texas Instruments MSP430G2553IPW20R is a 16-bit mixed-signal microcontroller operating at up to 16 MHz, with 16 KB of Flash memory, 512 bytes of SRAM, and a 20-pin TSSOP (PW) package. According to the Texas Instruments product page, the device includes comparator, UART, SPI, I2C, and timer resources for compact embedded control designs. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, input/output ports, and peripherals into one device. The MSP430 belongs to the mixed-signal MCU family, combining digital control with analog comparison capability and low-power operating modes. This makes it useful for embedded products that must measure a signal, control peripherals, communicate with external systems, or operate from limited power budgets. The MSP430G2553IPW20R provides 16 KB of Flash for firmware, 512 bytes of SRAM for working data, and a maximum clock frequency of 16 MHz. Its listed peripherals include a comparator, UART, SPI, I2C, and timer. The supplied distributor and manufacturer snippets identify the industrial temperature range as -40 °C to +85 °C and the package as 20-pin TSSOP (PW). The verified source data does not provide the complete pin-level electrical table, so individual pin functions and several operating-current values remain unverified. The MSP430G2553 platform is suited to low-power embedded control, sensor conditioning, communication bridges, and small control nodes. The comparator can support threshold-based analog supervision, while the serial interfaces allow connection to displays, sensors, transceivers, or storage devices. The 16 MHz CPU class is appropriate for event handling, protocol management, and control logic where deterministic behavior is more important than workstation-class processing. When designing a board around this MCU, verify the device pinout and the detailed electrical limits in the manufacturer datasheet before routing power, programming signals, communication interfaces, and analog inputs. Pay particular attention to decoupling, oscillator configuration, unused pins, programming access, and the selected supply voltage. Firmware and peripheral assignments should also be checked against the exact device variant and package. This page combines the verified Texas Instruments product information with distributor references, application guidance, and procurement considerations. It is intended to help engineers identify the correct MSP430G2553IPW20R for low-power embedded systems while clearly separating confirmed specifications from parameters that still require datasheet confirmation.

견적 요청 문의하기
MSP430G2553IPW28 - 16MHz 16KB Flash MCU | Texas Instruments (Tape & Reel)
MSP430G2553IPW28

MSP430G2553IPW28 - 16MHz 16KB Flash MCU | Texas Instruments (Tape & Reel)

The Texas Instruments MSP430G2553IPW28 is a 16-bit ultra-low-power mixed-signal microcontroller from the MSP430 Value Line series, featuring a 16MHz CPU, 16KB Flash, 512B SRAM, and a rich set of integrated peripherals. Housed in a 28-pin TSSOP (PW) package, it operates from 1.8V to 3.6V over the industrial temperature range of -40 to +85 C. A microcontroller (MCU) is a compact integrated circuit that governs a specific operation in an embedded system, containing a processor core, memory (Flash and SRAM), and programmable I/O peripherals. The MSP430 family sits within the broader hierarchy of 16-bit RISC microcontrollers under power-management-conscious embedded processing, and is renowned for five low-power modes (LPM0 to LPM4) that reduce current to as low as 0.1 uA in standby mode with RAM retention. Key features include a 10-bit ADC, an analog comparator, two 16-bit timers, and a universal serial communication interface (USCI) supporting UART, SPI, and I2C. The device integrates a temperature sensor, brownout reset, and capacitive-touch-enabled I/O. Its internal DCO is factory-calibrated to 16 MHz with approximately 1% accuracy, often eliminating external crystals. Architecturally, the MSP430G2553 uses a 16-bit RISC CPU with a von-Neumann memory map, enabling efficient code density and rapid wake-up from low-power modes. Firmware can be updated in-system via the two-wire Spy-Bi-Wire interface, simplifying production programming. Typical applications include portable medical devices, wireless sensor nodes, smart meters, remote controls, and battery-powered consumer electronics. The 16KB Flash accommodates substantial application code, while 512B SRAM supports moderate buffering. The integrated comparator and ADC enable direct sensor interfacing, and the multiple communication interfaces allow easy connectivity to radios, displays, and other peripherals. Design tip: place a 0.1 uF capacitor close to DVCC and 1 uF at the power entry; configure unused I/O as outputs to avoid floating-input leakage. This mature, widely available part has extensive community support for both prototyping and production. The MSP430G2553IPW28 is a popular choice for cost-sensitive, power-critical designs where performance and low energy consumption are paramount.

USD $0.72 문의하기
MSP430G2553IPW28R - 16MHz 16KB Flash MCU | Texas Instruments
MSP430G2553IPW28R

MSP430G2553IPW28R - 16MHz 16KB Flash MCU | Texas Instruments

The Texas Instruments MSP430G2553IPW28R is a 16-bit ultra-low-power mixed-signal microcontroller from the MSP430 Value Line series, featuring a 16MHz CPU, 16KB Flash, 512B SRAM, and a rich set of integrated peripherals. Housed in a 28-pin TSSOP (PW) package, it operates from 1.8V to 3.6V over the industrial temperature range of -40 to +85 C. A microcontroller (MCU) is a compact integrated circuit that governs a specific operation in an embedded system, containing a processor core, memory (Flash and SRAM), and programmable I/O peripherals. The MSP430 family sits within the broader hierarchy of 16-bit RISC microcontrollers under power-management-conscious embedded processing, and is renowned for five low-power modes (LPM0 to LPM4) that reduce current to as low as 0.1 uA in standby mode with RAM retention. Key features include a 10-bit ADC, an analog comparator, two 16-bit timers, and a universal serial communication interface (USCI) supporting UART, SPI, and I2C. The device integrates a temperature sensor, brownout reset, and capacitive-touch-enabled I/O. Its internal DCO is factory-calibrated to 16 MHz with approximately 1% accuracy, often eliminating external crystals. Architecturally, the MSP430G2553 uses a 16-bit RISC CPU with a von-Neumann memory map, enabling efficient code density and rapid wake-up from low-power modes. Firmware can be updated in-system via the two-wire Spy-Bi-Wire interface, simplifying production programming. Typical applications include portable medical devices, wireless sensor nodes, smart meters, remote controls, and battery-powered consumer electronics. The 16KB Flash accommodates substantial application code, while 512B SRAM supports moderate buffering. The integrated comparator and ADC enable direct sensor interfacing, and the multiple communication interfaces allow easy connectivity to radios, displays, and other peripherals. Design tip: place a 0.1 uF capacitor close to DVCC and 1 uF at the power entry; configure unused I/O as outputs to avoid floating-input leakage. This mature, widely available part has extensive community support for both prototyping and production. The MSP430G2553IPW28R is a popular choice for cost-sensitive, power-critical designs where performance and low energy consumption are paramount.

견적 요청 문의하기
MSP430G2553IPW8RQ1 - 16MHz Automotive MCU | Texas Instruments
MSP430G2553IPW8RQ1

MSP430G2553IPW8RQ1 - 16MHz Automotive MCU | Texas Instruments

The Texas Instruments MSP430G2553IPW8RQ1 is an automotive ultra-low-power 16-bit microcontroller with a 16 MHz clock, 16 KB of Flash memory, 512 bytes of SRAM, and a 28-pin TSSOP package. It integrates a 10-bit ADC, comparator, UART, SPI, I2C, and timer peripherals for compact control systems. An ultra-low-power microcontroller is a semiconductor device optimized to minimize energy consumption during active operation and standby. The MSP430 belongs to the embedded-controller hierarchy: microcontroller > mixed-signal MCU > ultra-low-power MCU. Its architecture combines a 16-bit RISC core with integrated analog and serial interfaces, reducing the component count required for embedded measurement, monitoring, and control designs. The verified product information identifies a 16 MHz maximum clock, 16 KB Flash, 512 B SRAM, and 10-bit ADC. These resources suit applications that require periodic sensing, local control, and low-rate serial communication without adopting a higher-power application processor. Integrated UART, SPI, and I2C peripherals support sensor, actuator, display, and external peripheral connectivity while preserving a compact embedded design. The MSP430G2553-Q1 product family targets automotive applications and is available in the specified 28-pin TSSOP configuration. Its MSP430 CPU16 architecture processes the ADC, comparator, timer, and communication resources in a compact package. The family-level information confirms the combination of 16 KB Flash and 512 B SRAM, making it suitable for firmware that coordinates mixed-signal sensing and embedded control rather than computationally intensive workloads. Typical uses include automotive body-control modules, low-duty-cycle sensor nodes, battery-operated instrumentation, industrial condition-monitoring equipment, and compact communication controllers. The integrated serial interfaces allow a design to connect sensors over I2C or SPI, use UART for a local link, and employ the ADC for analog measurements while retaining the modest memory footprint of the MSP430 architecture. Designers should verify the exact pin multiplexing, operating-voltage limits, clock configuration, and automotive qualification requirements in the manufacturer datasheet before layout release. The 28-pin TSSOP footprint also requires adequate spacing between fine-pitch leads, careful decoupling near the supply pins, and programming access consistent with the device configuration. This page consolidates verified manufacturer and distributor information, automotive ordering details, practical application guidance, and honest replacement analysis. It distinguishes confirmed drop-in information from package-code or cross-family parts that cannot be treated as true pin-compatible substitutes.

견적 요청 문의하기
MSP430G2553IRHB32R - 16MHz, 16KB Mixed-Signal MCU | TI
MSP430G2553IRHB32R

MSP430G2553IRHB32R - 16MHz, 16KB Mixed-Signal MCU | TI

The Texas Instruments MSP430G2553IRHB32R is a 16 MHz mixed-signal microcontroller with 16 KB Flash memory, 512 bytes of SRAM, a 10-bit ADC, an analog comparator, UART, SPI, and I2C in a 32-pin VQFN package. It is intended for low-power embedded systems that require compact digital control alongside limited analog measurement capability. The industrial-temperature ordering option is specified for operation from -40°C to +85°C. An ultra-low-power microcontroller is a semiconductor controller designed to minimize energy consumption while executing control, measurement, and communications tasks. The MSP430 family belongs to the mixed-signal MCU hierarchy, combining a 16-bit RISC core with analog and digital peripherals. MSP430 devices use multiple low-power operating modes, making them especially useful in battery-powered instrumentation, portable sensing, and embedded industrial products. The MSP430G2553 operates at up to 16 MHz and provides 16 KB of Flash for program storage plus 512 bytes of SRAM for working memory. Its integrated 10-bit ADC and comparator support analog front ends, while the universal serial communication interface provides UART, SPI, and I2C connectivity. Up to 24 I/O pins can support capacitive-touch functions according to the manufacturer product information. Power efficiency is central to the device architecture. Verified manufacturer information lists active-mode consumption of 230 μA at 1 MHz and 2.2 V, standby current of 0.5 μA, and off-mode current with RAM retention of 0.1 μA. Five power-saving modes allow firmware to match current consumption to workload, although exact standby time and wake-up behavior should be checked in the datasheet for the selected clock configuration. Typical uses include compact environmental sensors, industrial condition-monitoring nodes, low-power data loggers, capacitive-touch controls, wearable measurement devices, and embedded communications modules. The combination of 16 MHz processing speed, serial-interface flexibility, and small memory makes the MCU suitable for coordinating sensors and communicating results through UART, SPI, or I2C. Designers should account for the limited 512-byte SRAM when planning buffers and must place input and output decoupling close to the supply pins. The exposed-pad VQFN package also requires a properly designed thermal and ground layout. Firmware should use the device's low-power modes and avoid blocking delays when battery life is important. This product data combines manufacturer specifications, distributor availability information, and explicit cross-reference findings. It also distinguishes verified technical parameters from values that still require confirmation, providing a practical basis for schematic design, PCB layout, firmware planning, sourcing, and component selection.

견적 요청 문의하기
MSP430G2553IRHB32T - 16MHz Mixed-Signal MCU | Texas Instruments
MSP430G2553IRHB32T

MSP430G2553IRHB32T - 16MHz Mixed-Signal MCU | Texas Instruments

The Texas Instruments MSP430G2553IRHB32T is a 16-bit mixed-signal microcontroller with a 16 MHz CPU, 16 KB Flash memory, 512 B SRAM, and a 32-pin VQFN package with an exposed thermal pad. It integrates a 10-bit ADC, analog comparator, 16-bit timers, and UART, SPI, and I2C communication capability in an ultra-low-power design optimized for portable measurement and embedded control systems. A mixed-signal microcontroller combines digital processing and analog measurement functions on one semiconductor device. The MSP430 belongs to the ultra-low-power MCU hierarchy, where a 16-bit RISC core and architecture-specific low-power modes reduce energy consumption in battery-powered or intermittently powered equipment. The G2553 device family provides 16-bit registers and constant generators that support efficient execution of compact embedded control algorithms. Verified device features include a maximum clock speed of 16 MHz, 16 KB of programmable Flash, 512 B of SRAM, a 10-bit analog-to-digital converter, a versatile analog comparator, and communication peripherals supporting UART, SPI, and I2C. Up to 24 I/O pins are described as capacitive-touch capable, enabling compact user interfaces and low-cost sensing arrangements without requiring separate switch devices. The MSP430G2553 is based on the MSP430 CPU16 architecture and combines digital control with analog signal acquisition. Its low-power operating modes make it useful for portable instruments, sensor nodes, energy meters, and embedded products that spend substantial time waiting for measurements or user input. The mixed-signal peripherals reduce the component count of designs that otherwise require separate ADC and communication circuitry. Typical uses include low-power data loggers, industrial sensor interfaces, battery-powered monitoring equipment, simple motor-control systems, and connected measurement instruments. UART, SPI, and I2C support allows the controller to communicate with display controllers, external analog or digital sensors, transceivers, and data-storage components. The 16 MHz processing rate is suitable for responsive sampling, control-loop calculation, and peripheral coordination without adopting a higher-power application processor. Designers should use the exposed-pad land pattern correctly for thermal dissipation and should preserve the device's recommended supply and decoupling arrangement. Because firmware size, interrupt configuration, peripheral mapping, and exposed-pad construction affect interchangeability, an alternative should not be treated as a drop-in replacement unless its complete ordering information and pinout have been verified. The verified 32-VQFN construction makes the RHB package especially relevant to compact, surface-mounted industrial designs. This page consolidates the verified manufacturer and distributor information for MSP430G2553IRHB32T and separates confirmed specifications from parameters that still require datasheet confirmation. It also provides application guidance, procurement context, and a conservative replacement assessment that avoids presenting unrelated MSP430 devices as verified pin-compatible substitutes.

견적 요청 문의하기
MSP430I2031TPWR - 16MHz Metering AFE MCU 32KB Flash | TI
MSP430I2031TPWR

MSP430I2031TPWR - 16MHz Metering AFE MCU 32KB Flash | TI

The Texas Instruments MSP430I2031TPWR is a 16-bit metering analog front end (AFE) microcontroller with a 16.384 MHz 16-bit RISC CPU, three 24-bit sigma-delta ADCs, 32KB Flash, and 2KB RAM, housed in a 28-pin TSSOP (PW) package rated from -40C to +105C. A metering AFE MCU is a mixed-signal microcontroller that combines an MCU core with high-resolution analog-to-digital conversion on the same die. In the power management hierarchy it sits between generic MCUs and dedicated metrology ASICs, integrating sigma-delta conversion, timing, and computation for energy measurement without external ADCs. The MSP430i20xx family belongs to TI's MSP430 Metrology and Monitoring portfolio. Key features include the 16-bit RISC CPU with a DCO-based clock system generating up to 16.384 MHz, three independent 24-bit sigma-delta (SD24) converters ideal for simultaneous voltage and current sampling in poly-phase metering, two 16-bit timers, and five low-power modes optimized for extended battery life. The integrated flash-based memory supports field firmware updates for metering products. Architecturally, the device pairs the CPU16 core with a power management module (PMM) and a flexible clock subsystem, allowing the sigma-delta ADCs to run concurrently with computation for RMS power, energy accumulation, and tariff processing. The 24-bit ADC resolution supports wide dynamic range current sensing via shunt or CT inputs, reducing external component count and calibration effort. Typical applications include single-phase and poly-phase electricity meters, current-voltage monitoring in industrial equipment, battery-powered measurement instruments, and building automation energy sub-metering, where simultaneous multi-channel sampling and low power consumption are decisive. Design consideration: budget the sigma-delta ADC sampling rate against CPU headroom at 16.384 MHz, and place the analog inputs away from switching noise; the 2KB RAM constrains buffering depth for multi-channel DSP algorithms. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
MSP430L092SPW - 4MHz 16-Bit MCU | Texas Instruments
MSP430L092SPW

MSP430L092SPW - 4MHz 16-Bit MCU | Texas Instruments

Texas Instruments MSP430L092SPW is a 4 MHz, 16-bit mixed-signal microcontroller with 2 KB ROM, 2 KB SRAM, an 8-bit ADC, an 8-bit DAC, a comparator, and a timer, packaged in a 14-pin TSSOP (PW). The device combines the MSP430 RISC core with embedded analog conversion and comparison functions in a compact surface-mount package. A mixed-signal microcontroller is an integrated circuit that places programmable digital control with analog measurement or output functions on one device. In the MSP430 product hierarchy, the MSP430L092 belongs to the family of ultra-low-power 16-bit RISC microcontrollers within the broader embedded-control and semiconductor categories. Its combination of digital processing and analog peripherals reduces the component count in compact control systems while keeping software development within the MSP430 ecosystem. The principal operating characteristics include a 4 MHz clock, 2 KB of ROM, 2 KB of SRAM, and 8-bit ADC and DAC resolution. The ADC and DAC support direct acquisition and generation of analog quantities, while the comparator can monitor a voltage against a programmable threshold. A dedicated timer supports periodic timing, elapsed-time measurement, and event-generation tasks, making the MCU suitable for deterministic embedded-control sequences. The MSP430L092 uses 16-bit registers and a reduced-instruction-set architecture designed for efficient control operations. Its small 14-pin TSSOP package is appropriate for space-constrained instruments, sensor nodes, and compact control boards. Because the device combines digital processing with an ADC, DAC, comparator, and timer, peripheral sharing can reduce external circuitry and simplify firmware scheduling when the application does not require simultaneous high-rate conversion. Typical applications include low-power sensor acquisition, compact industrial control modules, battery-operated instruments, programmable signal-generation products, and threshold-based monitoring systems. The 8-bit ADC suits slower measurements where higher-resolution conversion is unnecessary, while the DAC supports controllable analog outputs. The timer provides a deterministic time base for sampling, control-loop updates, or periodic actuator commands. Designers should verify the complete electrical limits and pin assignments in the MSP430L092 manufacturer datasheet before layout or firmware release. Decoupling, analog grounding, and regulator selection should follow the device recommendations. Firmware should also account for the 2 KB ROM and 2 KB SRAM limits by controlling library size and avoiding unbounded buffer allocation. This product page consolidates verified manufacturer and distributor information, organizes the mixed-signal feature set, identifies application fit, and clearly documents pricing and pinout data that were not supplied by the retrieved sources.

견적 요청 문의하기