마이크로컨트롤러

제품 (18756)

DSPIC33EP256MC504-H/ML - 16-Bit 60 MIPS DSC 256KB Flash | Microchip
DSPIC33EP256MC504-H/ML

DSPIC33EP256MC504-H/ML - 16-Bit 60 MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC504-H/ML is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 60 MIPS performance, 256KB (85.5K x 24) of Flash program memory, and 16KB of RAM, housed in a 44-pin QFN (8x8 mm) package with exposed pad. A digital signal controller combines the compute throughput of a digital signal processor with the peripheral integration and deterministic control of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits above general-purpose MCUs and below multi-core application processors, making it the category of choice for closed-loop motor control, digital power conversion, and embedded signal processing. Key features include the dsPIC33E core with DSP engine (single-cycle MAC, 40-bit accumulator), 5V-tolerant operating voltage of 3.0V to 3.6V, high-speed PWM modules with complementary outputs and dead-time control, CAN 2.0B, I2C, SPI, UART/USART, IrDA, LINbus, and QEI interfaces, plus up to three on-chip op amp/comparator blocks with direct ADC connection and a 12-bit 500 ksps / 10-bit 1.1 Msps ADC with up to four sample-and-hold circuits. Architecturally, the device uses an enhanced Harvard pipeline with separate program and data buses, DMA support, and five timers. The -H temperature suffix covers extended operating ranges and the 44-VQFN EP package supports the automotive AEC-Q100 qualified member of the dsPIC33EP256MC504 family, enabling precision motor control in harsh environments. Typical applications include brushless DC and PMSM motor control with sensorless field-oriented control, digital SMPS and power-factor-correction converters, and automotive/industrial embedded control with CAN networking. Design consideration: budget Flash and RAM carefully - 256KB Flash is generous, but 16KB RAM can constrain large buffers for FFT or control-law tables; verify stack usage in MPLAB X before committing the PCB. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MC504-H/TL - 16-bit DSC 256KB Flash 60 MIPS | Microchip
DSPIC33EP256MC504-H/TL

DSPIC33EP256MC504-H/TL - 16-bit DSC 256KB Flash 60 MIPS | Microchip

The Microchip Technology DSPIC33EP256MC504-H/TL is a 16-bit digital signal controller (DSC) from the dsPIC33EP family with 256KB of Flash program memory, 32KB of RAM, and a dsPIC33E core operating at up to 60 MIPS, housed in a 44-pin VTLA (TQFP-style surface-mount) package supplied in a tube. A digital signal controller combines the computation throughput of a digital signal processor with the peripheral integration and control logic of a microcontroller. Within the power-management hierarchy, the dsPIC33E family sits between general-purpose 16-bit MCUs and dedicated DSPs, offering a modified Harvard architecture, DSP multiply-accumulate instructions, and high-resolution PWM peripherals in a single chip, making the DSC category the standard choice for embedded motion control and digital power conversion. Key features include the 70 MIPS-class dsPIC33E core (this speed grade runs at 60 MIPS), 256KB self-programmable Flash organized as 85.5K x 24, 32KB of RAM, and a high-speed PWM module purpose-built for motor control. The H temperature grade supports -40C to +150C operation, extending use into high-ambient environments such as under-hood and industrial drive enclosures. Technical depth comes from the integrated analog subsystem: a 10-bit ADC running at 1.1 Msps with four sample-and-hold circuits or a 12-bit ADC at 500 ksps with one sample-and-hold, up to three on-chip op amp/comparators with direct ADC connection, and programmable references. Connectivity includes CAN, I2C, SPI, UART/USART, IrDA, LIN, and QEI for encoder feedback. Flexible and independent ADC trigger sources synchronize sampling to the PWM events that dominate digital power loops. Typical applications are precision motor control (BLDC, PMSM, ACIM with Field Oriented Control), digital power supplies and solar inverters, and automotive/industrial actuators. The high-speed PWM with fault inputs and the QEI interface make it a natural single-chip servo controller. Design consideration: at 60 MIPS the core draws its peak current at 3.3V, so provide low-impedance 3.3V rails with local decoupling, and confirm that the +150C ambient limit is compatible with your junction-temperature budget at full clock rate. This page synthesizes distributor pricing, drop-in alternatives within the same VTLA-44 footprint, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MC504T-E/PT - 16-bit 60MIPS DSC 256KB Flash | Microchip
DSPIC33EP256MC504T-E/PT

DSPIC33EP256MC504T-E/PT - 16-bit 60MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC504T-E/PT is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS performance, 256KB (85.5K x 24) of Flash program memory, and 32KB of RAM in a 44-pin TQFP (10x10 mm, 0.8 mm pitch) package, qualified to AEC-Q100 for automotive applications with an extended -40C to +125C operating temperature range. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral integration and ease of use of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the dsPIC33EP family sits between general-purpose MCUs and dedicated DSPs, offering single-cycle MAC and DSP instructions alongside deterministic interrupt handling, making it a preferred choice for closed-loop real-time control systems. Key differentiating features include the dedicated motor control PWM (MCPWM) module with complementary outputs and dead-time insertion, a quadrature encoder interface (QEI) for position feedback, an integrated CAN 2.0B module for robust networked communication, three on-chip operational amplifiers and four analog comparators that reduce external component count in current-sense loops, and DMA controllers that offload data movement from the CPU. Architecturally, the device is built on a CMOS process with a modified Harvard bus structure and multiple internal bus architectures, executing DSP-class instructions from the 24-bit instruction word Flash. The core is supported by watchdog timer, brown-out reset, and multiple sleep/idle power modes; a 16-bit fixed-point datapath enables FIR/IIR filtering and control algorithms such as field-oriented control (FOC) at high sampling rates. Typical applications include precision brushless DC and PMSM motor drives for appliances and industrial automation, digital power conversion (PFC, LLC, solar micro-inverters), and automotive body or powertrain-adjacent nodes requiring CAN connectivity and AEC-Q100 qualification. The integrated op-amps and comparators make it particularly well suited to sensorless and current-feedback motor control designs. When designing with this device, budget the 3.3V supply rail carefully: all I/O operates at 3.3V, and the E-suffix temperature grade requires derating checks for the extended range. Use Microchip MPLAB X IDE with the XC16 compiler and the dsPIC33EP family programming spec for configuration bit settings. This page synthesizes distributor availability, drop-in alternative cross-references, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MC504T-E/TL - 16-Bit 60MIPs DSC 256KB Flash | Microchip
DSPIC33EP256MC504T-E/TL

DSPIC33EP256MC504T-E/TL - 16-Bit 60MIPs DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC504T-E/TL is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 60 MIPS performance with 256KB (85.5K x 24) of FLASH program memory and 16KB of RAM, housed in a 44-pin VTLA (6x6 mm) exposed-pad package in an extended temperature (E) grade with tape-and-reel (T) packaging. A digital signal controller combines the compute architecture of a microcontroller with the math acceleration of a DSP. In the power-management hierarchy, a DSC such as the dsPIC33EP sits between general-purpose MCUs and dedicated DSPs: it executes C code and real-time operating logic while simultaneously running control loops such as field-oriented motor control, digital power conversion, and digital filtering. The dsPIC33E family is Microchip's flagship 16-bit DSC platform for embedded control. Key features include the 16-bit dsPIC core running at 60 MIPS (with family members reaching 70 MIPS per the product page), 256KB self-programmable FLASH with ECC-style error correction organization, 16KB on-chip SRAM, and integrated DSP engine instructions for multiply-accumulate operations. The automotive-grade E temperature designation supports -40C to +125C operation, and the part carries AEC-Q100 qualification per distributor listings, making it suitable for vehicular environments. Technically, the dsPIC33EP architecture provides a modified Harvard bus with 24-bit instruction width, hardware divide, and DSP multiply-accumulate in a single cycle, enabling precision control loops at high sampling rates. On-chip peripherals for motor control (per Microchip product positioning: high-performance precision motor control systems) reduce external component count and loop latency. Typical applications include brushless DC and PMSM motor drives, digital power supplies (PFC, LLC), automotive body and powertrain auxiliaries, and industrial sensing and control nodes that need DSP-class math in an MCU workflow. Design consideration: the exposed pad of the 44-VTLA package is the primary thermal and ground path; connect it to a solid ground pour with multiple vias to meet thermal and signal-integrity targets. This page synthesizes distributor inventory data, family cross-references, and engineering design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
DSPIC33EP256MC504T-I/ML - 16-bit 70 MIPS DSC, 256KB Flash | Microchip
DSPIC33EP256MC504T-I/ML

DSPIC33EP256MC504T-I/ML - 16-bit 70 MIPS DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC504T-I/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 70 MIPS performance with 256KB (85.5K x 24) of FLASH program memory and 32KB of RAM in a 44-pin QFN (8x8 mm) surface-mount package. The -I suffix denotes the industrial temperature grade of -40C to +85C, and the T suffix denotes tape-and-reel packaging for automated assembly. A digital signal controller combines the compute architecture of a microcontroller with the mathematical acceleration of a DSP. In the power-management hierarchy, the dsPIC33EP sits above general-purpose 8-bit and 16-bit MCUs and directly targets real-time control loops where deterministic interrupt latency and hardware multiply-accumulate operations are mandatory, such as field-oriented control of three-phase motors and digital power conversion. Key differentiating features of the dsPIC33EP256MC504 include high-speed MCPWM (motor control PWM) modules for complementary or independent PWM generation, quadrature encoder interface (QEI) inputs for rotor position feedback, integrated operational amplifiers and analog comparators that reduce external component count in current-sensing circuits, and DSP engine instructions for filtering and control-law execution. The 60 MHz clock (70 MIPS execution) enables tight control-loop periods typical of digital power supplies and servo drives. The architecture pairs a 16-bit modified Harvard core with an enhanced interrupt controller and DMA support, keeping deterministic response in safety-relevant loops. On-chip flash self-programming supports field firmware updates, while multiple communication interfaces (UART, SPI, I2C) connect the controller to supervisory systems. Typical applications include brushless DC and permanent-magnet synchronous motor drives, solar inverters and power-factor-correction stages, digital welding and UPS systems, and industrial HMI/sensor nodes requiring DSP-grade math on a low-cost 16-bit platform. Design consideration: decouple both VDD/VSS pairs with 0.1 uF ceramics placed directly at the 8x8 QFN pads, and route PWM outputs away from analog op-amp inputs to prevent switching noise coupling into the ADC front end. This page synthesizes distributor pricing from DigiKey, Mouser, LCSC and Octopart (as of 2026-09-24), drop-in alternatives within the same 44-QFN footprint, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MC504T-I/TL - 70 MIPS 16-bit DSC 256KB Flash | Microchip
DSPIC33EP256MC504T-I/TL

DSPIC33EP256MC504T-I/TL - 70 MIPS 16-bit DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC504T-I/TL is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 70 MIPS performance with 256KB (85.5K x 24) of Flash program memory and 32KB of RAM, housed in a 44-pin VTLA (6x6 mm) package with exposed pad. It operates from a single 3.3V supply. A digital signal controller combines the compute throughput of a DSP core with the peripheral integration and ease of use of a microcontroller, sitting in the product hierarchy between general-purpose MCUs and dedicated DSPs within the broader embedded processor family. The dsPIC33EP family from Microchip Technology targets real-time control loops where both math throughput and rich peripherals matter. Key features of this part include the dsPIC33E 16-bit RISC core with DSP engine (multiply-accumulate, barrel shifter, modulo addressing), motor control PWM (MCPWM), quadrature encoder interface (QEI) inputs, integrated operational amplifiers and comparators, a CAN bus interface, and connectivity including I2C, SPI, UART/USART, and IrDA/LIN support. A peripheral trigger generator (PTG) enables autonomous peripheral coordination offloading the CPU. Technically, the DSP engine executes single-cycle MAC operations, enabling FOC (field-oriented control) motor algorithms and digital filters at 70 MIPS. The device runs at 60 MHz operation with the flash-based program store, and the industrial temperature range (I-suffix) covers -40C to +85C. The T-suffix indicates Tape and Reel packaging for automated assembly. Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) control, digital power conversion, sensorless drives using QEI feedback, automotive auxiliary systems, and industrial automation nodes requiring CAN connectivity. Design consideration: keep VDD/AVDD decoupling (0.1uF per pin plus bulk capacitance) close to the exposed pad, and solder the exposed thermal pad to the ground plane for reliable grounding and thermal performance. This page synthesizes distributor availability, drop-in alternatives, and practical design notes beyond the raw manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MC506-E/PT - 256KB Flash 16-bit DSC 64-TQFP | Microchip
DSPIC33EP256MC506-E/PT

DSPIC33EP256MC506-E/PT - 256KB Flash 16-bit DSC 64-TQFP | Microchip

The Microchip DSPIC33EP256MC506-E/PT is a high-performance 16-bit Digital Signal Controller (DSC) that combines DSP engine throughput with MCU peripherals on a single die. It integrates 256 KB of Flash program memory, 32 KB of RAM, and executes instructions at up to 70 MIPS from a 60 MHz internal clock, all housed in a 64-pin TQFP package (10x10 mm). The '-E' suffix denotes the extended industrial temperature grade of -40C to +125C, and the '/PT' suffix denotes the TQFP package. A Digital Signal Controller is a hybrid device that places a single-cycle multiply-accumulate (MAC) DSP engine alongside a deterministic MCU core, optimized for closed-loop real-time control. Within Microchip's portfolio the dsPIC33E family sits between PIC24F microcontrollers and the higher-end dsPIC33F/C families, addressing motor control, power conversion, and advanced sensor-fusion applications where on-chip DSP throughput removes the need for a companion DSP. Key features of the DSPIC33EP256MC506-E/PT include three on-chip operational amplifiers that can be configured with external passive networks as trans-impedance or difference amplifiers, one dedicated analog comparator, up to six PWM channels with edge-aligned or center-aligned modes, a Quadrature Encoder Interface (QEI) for rotary position sensing, a 12-bit ADC with up to 1.1 Msps conversion rate, and a CAN 2.0B module for industrial networking. The device also integrates a Peripheral Trigger Generator (PTG) for hardware-state-machine-driven sequencing, which offloads deterministic timing tasks from the CPU. Architecturally, the DSPIC33EP256MC506 uses a modified Harvard bus with separate program and data paths, single-cycle MAC, and a 16x16-bit hardware fractional/integer multiplier. The integrated OpAmps save BOM cost and board area in current-sense paths that would otherwise require discrete amplifiers, while the high-speed PWM and 1 ns edge resolution allow direct driving of MOSFET/IGBT gate drivers in switched-mode power and motor control loops. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) field-oriented control, solar micro-inverters, digital power factor correction, LED lighting drivers, and automotive sensor-fusion ECUs. The combination of CAN bus and OpAmp-based current sensing makes it particularly well-suited to industrial servo drives and electric-vehicle traction sub-systems. When designing with this device, ensure that the on-chip OpAmp feedback networks use the dedicated external resistor pads provided by the package, and verify that the switching frequency of the PWM is below the 1.1 Msps ADC throughput to avoid sampling aliasing in the current loop. Leave at least 10% Flash headroom for safety firmware updates. This page synthesizes distributor pricing, drop-in alternatives from Microchip's same family, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MC506-H/MR - 16-bit 60 MIPS DSC, 256KB Flash | Microchip
DSPIC33EP256MC506-H/MR

DSPIC33EP256MC506-H/MR - 16-bit 60 MIPS DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC506-H/MR is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS from a 3.3V supply, with 256KB (85.5K x 24) of Flash program memory, 32KB of SRAM, and a 64-pin VQFN (9x9 mm, MR) package, qualified to AEC-Q100 for automotive applications. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and deterministic interrupt architecture of a microcontroller. Within the power-management hierarchy, a DSC sits above general-purpose MCUs in the sense that its DSP engine (single-cycle MAC, DSP instruction set) and dedicated high-speed PWM peripherals exist specifically to run closed-loop control algorithms such as field-oriented control (FOC) for motors and digital power conversion loops. Key features include the 16-bit dsPIC33E CPU core running at up to 60 MIPS, integrated DSP engine with single-cycle multiply-accumulate, 256KB self-programmable Flash with ECC, and 32KB of RAM. Differentiating analog peripherals include three on-chip operational amplifiers plus a dedicated analog comparator, which reduce external component count in current-sense front ends for motor drives. High-speed PWM modules support complementary outputs with dead-time insertion, essential for three-phase inverter topologies. Architecturally, the device pairs the enhanced dsPIC33E core with a flexible clock system (internal FRC and PLL, external crystal options), multiple UART/SPI/I2C communication ports, DMA for peripheral-to-memory transfers, and watchdog/lockout protection. The 64-VQFN (9x9) exposed-pad package improves thermal dissipation and signal routing density versus 64-TQFP equivalents. Typical applications include precision sensorless and sensored motor control (BLDC, PMSM, ACIM) on Microchip MCLV-2/MCHV-2 development platforms, digital power supplies and solar inverters, automotive auxiliary systems, and industrial automation requiring deterministic control loops. Design consideration: the -H suffix denotes the automotive/extended temperature option; verify your firmware toolchain (MPLAB X, XC16) targets the 33EP device family, and reserve debug pins (PGD/PGC) in pin multiplexing plans. This page synthesizes distributor pricing context, drop-in same-family alternatives, design notes, and application guidance not consolidated in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MC506-I/PT - 16-Bit 70 MIPS DSC 64-TQFP | Microchip
DSPIC33EP256MC506-I/PT

DSPIC33EP256MC506-I/PT - 16-Bit 70 MIPS DSC 64-TQFP | Microchip

The Microchip Technology DSPIC33EP256MC506-I/PT is a 16-bit digital signal controller (DSC) in the dsPIC33EP family that executes up to 70 MIPS from a 60 MHz CPU clock with integrated DSP engine, 256 KB (85.5K x 24) of self-programmable Flash program memory, and 32 KB of SRAM, housed in a 64-pin TQFP (PT) package at 10x10 mm with 0.50 mm pitch. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease-of-use of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the DSC sits above general-purpose MCUs for control loops that demand fast math execution, and below dedicated DSPs where a full real-time operating environment is not required. The dsPIC33E core is Microchip's 16-bit DSC platform for high-performance embedded control. Key features include a 70 MIPS dsPIC DSC core with single-cycle MAC, dual-operand fetch, and a barrel shifter; 256 KB Flash and 32 KB SRAM; four DMA channels for peripheral-to-memory transfers without CPU intervention; five timers; integrated high-performance op amps; high-speed PWM outputs for motor control; and a charge-time measurement unit (CTMU) for temperature and touch sensing. The 64-TQFP package provides sufficient I/O for advanced motor drive designs. The architecture supports multiple internal bus arrangements and JTAG boundary scan for production test. Microchip states that 32-256 KB dsPIC33EP devices are feature- and pin-compatible, enabling straightforward migration within the family without PCB rework. The 64-pin TQFP package targets high-pin-count motor-control and digital-power designs. Typical applications include precision motor control for BLDC, PMSM, and ACIM drives used in e-mobility (e-bikes, scooters, electric vehicles), digital switch-mode power supplies, photovoltaic inverters, and industrial automation loops where fast PWM, on-chip analog, and DSP-class math run inside a single control period. A key design consideration: the core is sourced from a 60 MHz clock with the headline 70 MIPS delivered by the PLL, so supply decoupling, ground strategy, and Flash wait-state configuration should follow the manufacturer datasheet to achieve full rated throughput. This page synthesizes distributor pricing context, verified drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single citable reference for the DSPIC33EP256MC506-I/PT.

견적 요청 문의하기
DSPIC33EP256MC506T-E/MR - 16-bit 60 MIPS DSC, 256KB Flash | Microchip
DSPIC33EP256MC506T-E/MR

DSPIC33EP256MC506T-E/MR - 16-bit 60 MIPS DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC506T-E/MR is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 60 MIPS performance with 256 KB (85.5K x 24) of FLASH program memory and 32 KB of RAM, housed in a 64-pin VQFN (9x9 mm) package rated for -40C to +125C operation. A digital signal controller combines the computational capability of a digital signal processor with the peripheral integration and deterministic control of a microcontroller. Within the power management hierarchy, the dsPIC33E family sits above general-purpose MCUs and is purpose-built for embedded control loops, blending a DSP engine (17-bit x 17-bit multiplier, barrel shifter, dual 40-bit accumulators) with standard MCU peripherals such as UART, SPI, I2C, DMA, and a watchdog timer. Key features include Motor Control PWM (MCPWM) outputs, quadrature encoder interface (QEI), integrated comparators, on-chip operational amplifiers, and a 16-channel 10-bit/12-bit ADC - the analog and timing peripherals needed to close high-speed control loops for motors and power converters. The E-temperature grade (-40C to +125C) and AEC-Q100 qualification make it suitable for automotive-adjacent and harsh industrial environments. Architecturally, the dsPIC33EP core executes C compiler-friendly 24-bit instructions with single-cycle MAC operations, and a Direct Memory Access (DMA) controller offloads peripheral data transfers from the CPU, keeping interrupt latency low during critical PWM update cycles. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies (LLC, PFC, buck converters), automotive auxiliary systems, and industrial automation sensors and actuators. The rich PWM and fast ADC enable field-oriented control (FOC) implementations at switching frequencies above 50 kHz. Design consideration: the device requires a regulated 3.0V to 3.6V supply with proper decoupling on all VDD/VSS pin pairs; use an external crystal or the internal FRC oscillator with PLL to reach 60 MIPS - verify PLL lock before relying on precision timing. This page synthesizes distributor pricing, same-footprint drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MC506T-E/PT - 16-bit 60 MIPS DSC 256KB | Microchip
DSPIC33EP256MC506T-E/PT

DSPIC33EP256MC506T-E/PT - 16-bit 60 MIPS DSC 256KB | Microchip

The Microchip Technology DSPIC33EP256MC506T-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 60 MIPS performance with 256KB (85.5K x 24) of FLASH program memory and 16KB of RAM in a 64-pin TQFP (10x10 mm) surface-mount package. It is AEC-Q100 qualified and supplied on tape and reel. A digital signal controller combines the computational architecture of a microcontroller with the math acceleration of a digital signal processor. Within the power management IC hierarchy, a DSC sits between general-purpose MCUs and dedicated DSPs, offering a RISC core, DSP multiply-accumulate instructions, and integrated analog and motor-control peripherals on a single chip. The dsPIC33E family from Microchip is widely used where precise, deterministic control of power electronics is required. Key features of the DSPIC33EP256MC506 include a 16-bit dsPIC DSC core executing up to 60 MIPS, on-chip DSP engine with barrel shifter, boundary-scan (JTAG) debug capability, and low-power modes. The dsPIC33E family is further characterized by up to 70 MIPS performance across the portfolio, integrated DSP, and enhanced peripherals for precision motor control such as high-resolution PWM and ADC modules. The CMOS-fabricated device operates from a 3.3V supply, with a maximum clock frequency of 60MHz noted in distributor listings. The -E/PT suffix denotes an extended-temperature variant in TQFP packaging, and the T suffix denotes tape-and-reel delivery. The device integrates the peripheral set that Microchip designed for motor-control systems: PWM generation, analog sensing inputs, and communication interfaces for fieldbus and diagnostics. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies such as PFC and LLC converters, and industrial automation requiring deterministic control loops. The AEC-Q100 qualification makes it suitable for automotive auxiliary motor and actuator control. Design consideration: budget flash and RAM carefully - at 256KB FLASH and 16KB RAM, the part suits control-law-heavy firmware but limited protocol stacks; verify temperature grade suffix (-E extended) matches your enclosure conditions. This page synthesizes distributor pricing, drop-in alternatives, pinout, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MC506T-I/MR - 70 MIPS 16-bit DSC, 256KB Flash | Microchip
DSPIC33EP256MC506T-I/MR

DSPIC33EP256MC506T-I/MR - 70 MIPS 16-bit DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC506T-I/MR is a 16-bit digital signal controller (DSC) delivering up to 70 MIPS performance with 256KB (85.5K x 24) Flash and 32KB RAM, housed in a 64-pin VQFN (9x9 mm) exposed-pad package and operating from a 3.3V supply (tape-and-reel, industrial temperature grade). A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and control flexibility of a microcontroller. Within the semiconductor hierarchy, the dsPIC33EP family sits under 16-bit microcontrollers and DSCs, embedded processors designed specifically for real-time closed-loop control where both math-intensive DSP operations and fast interrupt-driven I/O are required simultaneously. Key features include a modified Harvard dsPIC DSC core with DSP engine (single-cycle MAC, 40-bit accumulators), motor control PWM (MCPWM) peripherals, quadrature encoder interface (QEI) inputs, three internal op-amps and comparators for current-sense front ends, a Peripheral Trigger Generator (PTG), an integrated CAN module, and Peripheral Pin Select (PPS) for flexible I/O remapping per the Microchip family datasheet DS70000657J. Architecturally, the dsPIC33EP core executes most instructions in a single cycle at 70 MIPS, with hardware DSP support for fractional and integer math, making it well suited to field-oriented control (FOC) algorithms that must complete within a single PWM period. The internal analog op-amps can be configured as current-sense amplifiers feeding the ADC, reducing external BOM cost in inverter designs. Typical applications include brushless DC and PMSM motor drives, digital power supplies and inverters, industrial automation, and embedded control systems requiring CAN connectivity. A key design consideration: the 64-VQFN exposed pad must be soldered to a grounded thermal land pattern for reliable operation at high MIPS clock rates; verify supply sequencing and use adequate decoupling on all VDD/VDDCORE pins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MU806-E/MR - 60 MIPS 16-bit DSC, 64-VQFN | Microchip
DSPIC33EP256MU806-E/MR

DSPIC33EP256MU806-E/MR - 60 MIPS 16-bit DSC, 64-VQFN | Microchip

The Microchip Technology DSPIC33EP256MU806-E/MR is a 16-bit digital signal controller (DSC) with a dsPIC33E core running at up to 60 MIPS, 256KB (85.5K x 24) of Flash program memory, and 12K x 16 (28KB) of RAM, housed in a 64-VQFN (9x9) exposed-pad package. The E suffix denotes the extended temperature range of -40C to +125C, making this device suitable for harsh industrial and automotive-adjacent environments. A digital signal controller combines the compute throughput of a digital signal processor with the peripheral integration and deterministic interrupt behavior of a microcontroller. Within the power-management hierarchy of embedded systems, the dsPIC33E family sits above basic PIC16/PIC18 MCUs and beside dedicated DSPs, offering a single-chip solution for closed-loop control systems that need both math acceleration and rich I/O. Key features include integrated USB OTG, dual CAN 2.0B modules, three-wire SPI and I2C peripherals, a high-speed PWM engine purpose-built for motor control, an internal oscillator, and 51 general-purpose I/O pins. The extended -40C to +125C operating envelope distinguishes the -E/MR suffix from the industrial -I/MR variant. Architecturally, the dsPIC33EP core pairs a 16-bit MCU pipeline with DSP instructions (MAC, DSP multiply, barrel shifter) and supports 85.5K x 24-bit instruction words. Dual motor-control capability allows simultaneous control of two motors or a dual-axis servo from one chip, reducing bill-of-materials complexity versus MCU-plus-DSP discrete designs. Typical applications include sensorless BLDC and PMSM motor drives, digital power supplies (PFC, LLC converters), UPS systems, automotive auxiliary controls operating at elevated ambient temperatures, and industrial automation nodes that require CAN and USB connectivity in a compact 9x9 mm footprint. When designing with this device, the internal VCAP regulator pin requires a low-ESR capacitor to ground per the manufacturer datasheet, and the exposed pad should be soldered to a ground plane for thermal and signal-integrity reasons. Extended-temperature designs should derate maximum clock frequency margin at the +125C corner. This page synthesizes distributor availability data, same-family drop-in variants, and practical design notes not found in a single manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MU806-I/MR - 16-bit DSC 256KB Flash QFN-64 | Microchip
DSPIC33EP256MU806-I/MR

DSPIC33EP256MU806-I/MR - 16-bit DSC 256KB Flash QFN-64 | Microchip

The Microchip Technology DSPIC33EP256MU806-I/MR is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, combining a 70 MIPS dsPIC DSC core with 256 KB (85.5K x 24) of flash program memory, 28 KB of RAM, USB On-The-Go, and a 64-pin VQFN exposed-pad package. A digital signal controller merges the control peripheral set of a microcontroller with the multiply-accumulate DSP engine of a digital signal processor. Within the power-management hierarchy, a DSC sits between general-purpose MCUs and dedicated DSPs: it executes real-time control loops (motor control, digital power conversion) at signal-processor speed while retaining MCU-class communication peripherals. The dsPIC33EP family is Microchip's second-generation 16-bit DSC platform built on the enhanced dsPIC33E core. Key features include 16-bit modified Harvard architecture with DSP instruction extensions, high-speed PWM modules suited to digital power and motor drive, USB OTG connectivity, and Peripheral Pin Select (PPS) that remaps digital functions across up to 51 I/O pins. Multiple UART, SPI, I2C, and ECAN ports support industrial communication stacks, and an internal oscillator eliminates the need for an external crystal in many designs. The device operates from a single 3.3V supply (3.0V to 3.6V range) across an industrial -40C to +85C temperature rating (the -I suffix). The 64-VFQFN exposed-pad package measures 9x9 mm and provides a low-inductance thermal path through the center pad, which must be soldered to a grounded copper pour for signal integrity and heat dissipation. Typical applications include brushless DC and PMSM motor control, switched-mode power supplies and digital lighting (HID/LED) ballasts, USB-enabled industrial instruments, and automotive subsystems (the base die is offered in AEC-Q100 variants). Design tip: connect the internal VCAP/VDDCORE regulator capacitor exactly as specified in the manufacturer datasheet; omitting or undersizing it is the most common cause of core instability. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MU806-I/PT - 16-bit 70 MIPS DSC USB | Microchip
DSPIC33EP256MU806-I/PT

DSPIC33EP256MU806-I/PT - 16-bit 70 MIPS DSC USB | Microchip

The Microchip DSPIC33EP256MU806-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, featuring a 256 KB (85.5K x 24) flash program memory, 28 KB RAM, and a core running at up to 70 MIPS, packaged in a 64-pin TQFP (10x10 mm) surface-mount enclosure with USB support. A digital signal controller combines the compute architecture of a microcontroller with DSP-class math acceleration on a single chip. In the product hierarchy, the dsPIC33EP belongs to Microchip's 16-bit MCU/DSC portfolio: DSC -> 16-bit microcontroller -> embedded processor -> semiconductor. This makes the part attractive where tight real-time control loops (motor FOC, digital power) execute alongside general firmware. Key features include the modified Harvard architecture with a 16-bit data path and 24-bit instructions, linear program memory addressing up to 4 MB, an internal oscillator, integrated USB, and Peripheral Pin Select (PPS) that lets designers remap digital peripherals onto many of the 51 I/O pins to optimize board routing. Technical depth: the dsPIC33E core provides DSP multiply-accumulate instructions, hardware division, and interrupt latency suited to precision control. The MU family variant adds the USB peripheral, distinguishing it from MC (motor control) and GP (general purpose) siblings in the same dsPIC33EP generation, which share the same core, memory map style, and 64-pin TQFP footprint. Typical applications include precision motor control (FOC/BLDC/PMSM drives), digital power supplies and PFC stages, and embedded control systems requiring USB connectivity such as industrial sensors, instrumentation, and human-machine interfaces. Design consideration: confirm VCAP/VDDCORE capacitor requirements and operating voltage range (standard -40C to +85C for the -I temperature suffix) from the Microchip datasheet before finalizing the power tree. This page synthesizes distributor data, same-family drop-in alternatives, and design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MU806T-I/PT - 16-Bit DSC 256KB USB CAN | Microchip
DSPIC33EP256MU806T-I/PT

DSPIC33EP256MU806T-I/PT - 16-Bit DSC 256KB USB CAN | Microchip

The Microchip Technology DSPIC33EP256MU806T-I/PT is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33E core, 256 KB Flash program memory, 28 KB RAM, and a 64-pin TQFP (10x10 mm) package. It integrates dual CAN (2xCAN) controllers, USB 2.0 OTG, high-speed PWM, and a 24-channel 10/12-bit ADC, making it a single-chip solution for motor control, power conversion, and industrial networking. A digital signal controller (DSC) is a hybrid device that combines the real-time control peripherals and interrupt behavior of a microcontroller (MCU) with the single-cycle multiply-accumulate (MAC) and barrel-shifter datapath of a digital signal processor (DSP). In the system hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes control loops in firmware while accelerating math-intensive algorithms such as Park/Clarke transforms, PID, and digital filters. The dsPIC33E family is Microchip's third-generation DSC line, targeting high-performance precision motor control and digital power conversion. Key differentiators of this device include its 70 MIPS core (60 MHz, 1.65 DMIPS/MHz class), 256 KB Flash with 85.5K x 24 instruction words, 28 KB RAM, 15-channel DMA, and dual CAN 2.0B modules. The high-speed PWM module provides 6 pairs of complementary outputs with 1.04 ns resolution, enabling precise three-phase inverter control. The 24-channel ADC supports 10-bit and 12-bit modes with simultaneous sampling for current-sense and position feedback. The dsPIC33E core uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction words, executing most instructions in a single cycle. The integrated DSP engine adds a 17x17-bit multiplier, a 40-bit accumulator, and two 40-bit saturating accumulators for fixed-point math. On-chip peripherals include UART, SPI, I2C, USB 2.0 full-speed OTG, and dual CAN, allowing the device to serve as both a control node and a communications gateway. Typical applications include field-oriented control (FOC) of three-phase brushless DC (BLDC) and permanent-magnet synchronous motors (PMSM), digital power supplies, solar micro-inverters, automotive body electronics, and industrial automation gateways. The dual CAN interface makes it well suited to automotive and industrial networks requiring redundant buses. When designing with this device, pay close attention to the analog supply decoupling and the ADC reference (AVDD/AVSS) layout, since the 12-bit ADC accuracy depends on a clean reference. The 64-pin TQFP package requires careful thermal and ground-plane design for the high-speed PWM and USB differential pair. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a single reference for selection, replacement, and layout decisions.

견적 요청 문의하기
DSPIC33EP256MU810-E/PF - 16-bit 60 MIPS DSC 256KB Flash | Microchip
DSPIC33EP256MU810-E/PF

DSPIC33EP256MU810-E/PF - 16-bit 60 MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MU810-E/PF is a 16-bit digital signal controller (DSC) delivering 60 MIPS performance (70 MIPS-class dsPIC33E core) with 256 KB (85.5K x 24) of Flash program memory, integrated USB, dual CAN, and high-speed PWM, housed in a 100-pin TQFP (14x14 mm, 0.5 mm pitch, /PF) package with an extended -40C to +125C operating temperature range. A digital signal controller combines the computational architecture of a microcontroller with the mathematical throughput of a DSP. In the power-management hierarchy of embedded systems, a DSC sits above general-purpose MCUs for control-loop-intensive tasks: the dsPIC33E family executes single-cycle MAC and DSP instructions, allowing FOC motor-control algorithms and digital power feedback loops to run at PWM switching rates that a standard 8-bit or mid-range 16-bit MCU cannot sustain. Key features include 256 KB of self-programmable Flash, up to 28 KB of SRAM, a high-speed PWM module supporting complementary outputs with dead-time insertion, dual CAN 2.0B controllers, full-speed USB OTG, and multiple 12-bit ADCs supporting simultaneous sampling. The extended-temperature -E grade enables deployment in industrial enclosures and under-hood environments without external cooling measures. Technically, the dsPIC33E core pairs a 16-bit pipeline datapath with a DSP engine (17-bit x 17-bit multiplier, 40-bit accumulator) so that filtering, transformation, and control algorithms execute alongside interrupt-driven supervisory code. Eight-channel DMA offloads the CPU for USB, ADC, and SPI data streaming, and the peripheral-pin-select feature maps digital peripherals to flexible I/O locations on the 85+ available I/O, simplifying PCB routing. Typical applications include brushless DC and permanent-magnet motor drives for industrial automation, digital power supplies and solar inverters requiring fast control loops, and USB-connected sensing or instrumentation nodes that also need CAN bus connectivity. When designing with this part, budget the 3.0 V to 3.6 V supply rail carefully and keep the VDDCORE regulator capacitor close to the package; the PGEC/PGED programming pins are sensitive to cross-talk, so keep ICSP traces short and isolated. This page synthesizes distributor pricing, verified drop-in alternatives from the same TQFP-100 footprint, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MU810-E/PT - 16-bit DSC, 256KB Flash, USB | Microchip
DSPIC33EP256MU810-E/PT

DSPIC33EP256MU810-E/PT - 16-bit DSC, 256KB Flash, USB | Microchip

The Microchip Technology DSPIC33EP256MU810-E/PT is a high-performance 16-bit Digital Signal Controller from the dsPIC33EP family, integrating a 70 MIPS dsPIC DSC core with DSP capability, 256 KB of Flash program memory, and 28 KB of SRAM in a 100-pin TQFP (PT) package. It operates at up to 60 MHz, supplies 51 general-purpose I/O pins, and runs from a 3.0 V to 3.6 V supply, making it suitable for demanding real-time control applications. A Digital Signal Controller (DSC) is a hybrid device that combines the deterministic interrupt-driven architecture of a microcontroller with the high-throughput computational capability of a digital signal processor (DSP). In the broader system taxonomy, a DSC belongs to the microcontroller family, which sits within embedded processors, then semiconductor ICs, and finally the power management and control hierarchy used in motor control, power conversion, and digital audio systems. The 'E' suffix indicates an extended temperature grade of -40 °C to +125 °C, while the 'PT' suffix denotes the 12 x 12 mm 100-pin TQFP surface-mount package with 0.5 mm pitch. Key features include integrated USB 2.0 full-speed OTG, two CAN modules, up to 15 DMA channels, 27 timers (nine 16-bit and eighteen 32-bit), a 16-channel 12-bit ADC with up to 500 ksps conversion, five 16-bit PWM generators with dedicated time bases and up to 8 output channels, and four compare/PWM modules with dual-edge capability. The 70 MIPS core can execute a 16x16 multiply in one cycle and supports fractional arithmetic (1.15 format) via the XAGU and DSP engine. Typical applications include precision motor control (BLDC, PMSM, AC induction, switched reluctance), digital power conversion (PFC, LLC, phase-shifted full-bridge), automotive body and chassis ECUs, industrial drives, photovoltaic inverters, and USB-connected embedded devices. Design considerations include the need for a stable 3.3 V analog supply for the ADC, decoupling on every VDD/VSS pair, and a JTAG or PG/PG interface for in-circuit programming.

견적 요청 문의하기
DSPIC33EP256MU810-I/PF - 16-bit DSC 60 MIPS 256KB Flash | Microchip
DSPIC33EP256MU810-I/PF

DSPIC33EP256MU810-I/PF - 16-bit DSC 60 MIPS 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MU810-I/PF is a 16-bit digital signal controller (DSC) delivering 60 MIPS performance with 256 KB flash memory, 28 KB SRAM, and integrated USB and dual CAN 2.0B modules, housed in a 100-pin TQFP (14x14 mm) package. A digital signal controller combines the computational architecture of a microcontroller with the math throughput of a digital signal processor. In the power management hierarchy of embedded systems, a DSC such as the dsPIC33EP family sits between general-purpose MCUs and dedicated DSPs, offering deterministic single-cycle MAC/DSP instructions alongside standard control peripherals, which is why DSCs dominate precision motor control, digital power conversion, and embedded sensing applications. Key features include the dsPIC33E 16-bit core operating up to 60 MIPS, 256 KB (85.5K x 24) of flash program memory with self-programming, 28 KB of SRAM, a high-speed USB 2.0 full-speed device module, two CAN 2.0B controllers, up to 15 DMA channels, and advanced analog peripherals. These resources let a single chip close high-speed current loops while servicing USB or CAN communications simultaneously. Architecturally, the DSP engine supports single-cycle MAC and 40-bit accumulators, while the PWM modules with dedicated time bases generate complementary outputs with dead-time insertion, the foundation of field-oriented motor control and digitally controlled switching power supplies. The operating supply range is 3.0 V to 3.6 V, and the industrial grade I suffix supports -40C to +85C ambient operation. Typical applications include brushless DC and PMSM motor drives, switch-mode power supplies and digital power factor correction, USB-connected industrial sensors, and CAN-networked automotive or building control nodes. For design, confirm PGEC/PGED programming line routing carefully: this device is reported to be sensitive to cross-talk on its programming data lines, so keep ICSP traces short and away from high-dv/dt PWM nets. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MU810-I/PT - 60MHz 256KB DSC 100-TQFP | Microchip
DSPIC33EP256MU810-I/PT

DSPIC33EP256MU810-I/PT - 60MHz 256KB DSC 100-TQFP | Microchip

The Microchip Technology DSPIC33EP256MU810-I/PT is a 16-bit digital signal controller (DSC) with a dsPIC33E core running at up to 60 MHz internal clock (70 MIPS instruction rate), 256 KB of flash program memory, 28 KB of SRAM, and a 100-pin TQFP (12x12 mm, PT) surface-mount package. It operates from a 3 V to 3.6 V supply in the industrial -40C to +85C temperature range. A digital signal controller combines the compute pipeline of a digital signal processor (DSP) with the peripheral set and control architecture of a microcontroller (MCU). Within the power management hierarchy of embedded systems, the dsPIC33EP family sits above basic 16-bit MCUs and provides hardware multiply-accumulate (MAC) DSP instructions, making it a bridge between general-purpose microcontrollers and dedicated DSPs for real-time control. Key features include high-speed PWM modules for precision motor control, dual CAN 2.0B controllers, an integrated full-speed USB 2.0 device module, multiple UART/SPI/I2C serial ports, advanced analog peripherals (12-bit ADC with multiple sample-and-hold channels), and up to 51 general-purpose I/O. The extended DSP instruction set enables single-cycle MAC and 40-bit accumulators for control-loop mathematics. Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with 24-bit instruction words, hardware looping, and bit-reversal addressing for FFT operations. Flash is self-programmable, supporting field firmware updates. The peripheral ecosystem is supported by MPLAB X IDE and XC16 compiler toolchains. Typical applications include dual-axis brushless DC and PMSM motor drives, digital power supplies (PFC, LLC), UPS systems, industrial automation nodes using dual CAN, and USB-connected instrumentation where the on-chip USB device controller removes the need for an external interface chip. Design consideration: the 3.0-3.6 V supply requires a clean 3.3 V rail with local 0.1 uF decoupling on every VDD/VSS pair; use MPLAB Code Configurator to reduce peripheral bring-up time. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MU810T-E/BG - 16-bit 60MIPS DSC 256KB Flash | Microchip
DSPIC33EP256MU810T-E/BG

DSPIC33EP256MU810T-E/BG - 16-bit 60MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MU810T-E/BG is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 60 MIPS performance with 256KB (85.5K x 24) of Flash program memory and 12K x 16 of SRAM, housed in a 121-ball TFBGA (10x10 mm) package and qualified to AEC-Q100 for automotive applications. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC sits between a general-purpose MCU and a dedicated DSP, making the dsPIC33E family a common choice for closed-loop control systems such as field-oriented motor control, digital power conversion, and sensor signal conditioning. Key features include the dsPIC33E core running at up to 60 MIPS, integrated USB connectivity, a high-speed PWM module for power conversion and motor drive, advanced analog peripherals, and an extended automotive temperature range (-40C to +125C) denoted by the E suffix. The Tape-and-Reel (T) suffix supports automated pick-and-place assembly in volume production. Architecturally, the device uses a 16-bit modified Harvard architecture with DSP engine instructions (MAC, DSP multiply) and a wide 24-bit instruction word. The 121-TFBGA footprint conserves board area versus TQFP equivalents while providing up to 51 I/O ports, enabling dense, high-channel-count designs. Typical applications include brushless DC and PMSM motor control for automotive auxiliaries, USB-connected industrial sensors, digital LED drivers, and power-factor-correction converters where the high-speed PWM and DSP capability are directly exploited. Design consideration: because the E/BG variant is AEC-Q100 qualified but rated to +125C, verify junction temperature margins with your thermal solution; the 10x10 mm BGA requires careful PCB ball-mapping and X-ray-capable assembly processes. This page synthesizes distributor data, drop-in family alternatives, and practical design notes beyond the manufacturer datasheet to support sourcing and design decisions.

견적 요청 문의하기
DSPIC33EP256MU810T-E/PF - 16-bit 60MIPS DSC 256KB | Microchip
DSPIC33EP256MU810T-E/PF

DSPIC33EP256MU810T-E/PF - 16-bit 60MIPS DSC 256KB | Microchip

The Microchip Technology DSPIC33EP256MU810T-E/PF is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 60 MIPS from its dsPIC DSC core, with 256KB (85.5K x 24) of FLASH program memory and 12KB of RAM, housed in a 100-pin TQFP (14x14 mm) package rated for the extended -40C to +125C temperature range. A digital signal controller combines the computation architecture of a microcontroller with DSP-style math acceleration in a single chip. In the power-management hierarchy, the dsPIC33EP family sits between general-purpose 16-bit MCUs and standalone DSPs, integrating motor-control peripherals, USB connectivity, and high-speed analog converters so a single device can run both control algorithms and communication stacks for embedded systems. Key features include the high-speed Motor Control PWM module with complementary outputs and dead-time insertion, on-chip USB 2.0 full-speed connectivity, and multiple ADCs supporting up to 32 channels at 10-bit or 12-bit resolution. The device is AEC-Q100 qualified for automotive use and is supplied in tape-and-reel packaging for volume assembly. Architecturally, the DSP engine provides single-cycle MAC and 40-bit accumulators, allowing real-time control loops such as field-oriented motor control or digital power conversion to execute at 60 MIPS. DMA channels offload data movement between peripherals and RAM, freeing CPU cycles for control and signal-processing tasks. The extended operating temperature grade (E suffix) makes it suitable for harsh underhood or industrial environments. Typical applications include precision motor control (BLDC, PMSM, FOC), digital power supplies and solar inverters, automotive auxiliary systems, and USB-connected sensor or industrial-control nodes that need both DSP throughput and rich peripherals. Design consideration: operate the device from a regulated 3.0V to 3.6V supply and budget the 51 I/O pins carefully, since the 100-TQFP offers many multiplexed peripheral functions that must be assigned with Microchip's Pin Manager tool in MPLAB X. This page synthesizes distributor pricing, pin-compatible family alternatives, and practical design guidance not found in the manufacturer datasheet alone.

견적 요청 문의하기
DSPIC33EP256MU810T-I/BG - 16-bit 60MIPs DSC 256KB USB | Microchip
DSPIC33EP256MU810T-I/BG

DSPIC33EP256MU810T-I/BG - 16-bit 60MIPs DSC 256KB USB | Microchip

The Microchip Technology DSPIC33EP256MU810T-I/BG is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 60 MIPs performance, 256KB (85.5K x 24) Flash program memory, 12K x 16 RAM, and an integrated full-speed USB 2.0 module, housed in a 121-ball TFBGA (10x10 mm) package. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripherals and ease of use of a microcontroller (MCU). DSCs sit within the broader embedded processing hierarchy between general-purpose MCUs and dedicated DSPs, offering single-cycle MAC, DSP instruction support, and deterministic interrupt latency for real-time control loops. Key features include the dsPIC33E core running at 60 MIPs, on-chip USB connectivity for direct host/device communication, high-speed PWM peripherals for precision motor control, and advanced analog integration that reduces external component count. The 121-TFBGA (10x10) ball-grid-array footprint saves board area versus TQFP alternatives while supporting dense, high-pin-count applications. Architecturally, the dsPIC33EP family pairs a modified Harvard 16-bit core with 24-bit instruction words, hardware DSP multiply-accumulate units, and up to 512KB Flash across family members. The MU810 variant targets systems needing both heavy digital signal processing and rich peripheral sets, with industrial 3.0V to 3.6V supply operation and industrial temperature rating for the -I grade. Typical applications include brushless DC and PMSM motor control drives, USB-enabled industrial instrumentation, digital power conversion, and embedded audio or sensor-fusion signal processing where DSP math and MCU control must coexist. Design consideration: BGA packages require controlled-impedance PCB fabrication and X-ray inspection capability for rework; verify your manufacturing line supports 0.8 mm-pitch BGA assembly before committing to this package option. This page synthesizes distributor pricing, drop-in alternatives, design notes, and application guidance not found in the manufacturer datasheet alone.

견적 요청 문의하기
DSPIC33EP256MU814-E/PL - 16-bit 60MIPS DSC 256KB Flash | Microchip
DSPIC33EP256MU814-E/PL

DSPIC33EP256MU814-E/PL - 16-bit 60MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MU814-E/PL is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 60 MIPS performance with 256KB (85.5K x 24) of Flash program memory and 28KB of RAM, housed in a 144-pin LQFP (20x20 mm) package rated for -40C to +125C automotive operation. A digital signal controller combines the computational architecture of a microcontroller with the math-acceleration hardware of a DSP. In the power management IC hierarchy of embedded systems, the dsPIC33EP family sits in the 16-bit microcontroller and DSC class, targeting real-time control loops where both C-code flexibility and multiply-accumulate throughput are required. The dsPIC33EP core uses an enhanced pipeline with DSP engine support for fractional and integer MAC operations. Key features of this MU814 variant include integrated full-speed USB 2.0 device/Host/OTG capability, two CAN 2.0B modules, and a 15-channel Direct Memory Access (DMA) controller that offloads data movement from the CPU core. The high-speed PWM peripherals with dedicated time base make it part of Microchip's motor-control-oriented dsPIC33EP MU subfamily. Technical depth: the device operates from a 3.3V supply at up to 60 MHz system frequency, executing one instruction per cycle for 60 MIPS throughput. The Flash is organized as 85.5K x 24-bit instruction words, and the 15 DMA channels can service ADC results, UART, SPI, and USB endpoints autonomously, critical for deterministic control loops in motor drives and digital power converters. Typical applications include precision motor control (BLDC, PMSM, FOC), digital power supplies and solar inverters, USB-connected industrial instruments, and automotive AEC-Q100 systems where the -E extended temperature grade and CAN modules are required. Design consideration: at 60 MIPS the device requires a clean 3.3V rail with decoupling capacitors placed at all VDD/VSS pin pairs of the 144-LQFP; also budget code space carefully since 256KB Flash cannot be expanded externally on the Enhanced Parallel Master Port without added complexity. This page synthesizes distributor pricing, drop-in family alternatives, datasheet pointers, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기