마이크로컨트롤러

제품 (18756)

DSPIC33EP256MC202T-I/SO - 16-bit 70 MIPS DSC, 256KB Flash | Microchip
DSPIC33EP256MC202T-I/SO

DSPIC33EP256MC202T-I/SO - 16-bit 70 MIPS DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC202T-I/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 70 MIPS performance from a dsPIC33E core with 256KB (85.5K x 24) of FLASH program memory and 16KB of RAM, housed in a 28-pin SOIC (7.50 mm width) package. A digital signal controller combines the computational architecture of a microcontroller with DSP capability, sitting in the product hierarchy between a general-purpose MCU and a dedicated DSP. The dsPIC33EP family integrates a DSP engine, high-speed PWM peripherals, and advanced analog, allowing a single chip to execute both control-loop and signal-processing tasks in motor drives and power conversion systems. Key features include the 70 MIPS 16-bit core, 256KB self-programming FLASH with ECC-class endurance, 16KB of on-chip SRAM, and connectivity peripherals spanning I2C, SPI, UART/USART, IrDA, LINbus, and QEI (quadrature encoder interface) for motor position feedback. Multiple 10-bit/12-bit ADC inputs support simultaneous analog sampling for current and voltage sensing. Architecturally, the dsPIC33E core pairs a 16-bit MCU instruction set with DSP multiply-accumulate and barrel-shifter resources, enabling deterministic execution of PID and field-oriented control (FOC) loops. The high-resolution PWM modules are targeted at inverter, BLDC, PMSM, and power-factor-correction stages where precise dead-time control matters. Typical applications include precision motor control (BLDC/PMSM drives, servo and stepper controllers), digital power supplies and solar inverters, and embedded industrial control nodes requiring DSP-class math without a separate DSP chip. Design consideration: the 28-SOIC package exposes limited I/O, so plan pin multiplexing (PWM, QEI, communication ports) early, and follow Microchip's clock and power-supply decoupling guidance in the datasheet. This page synthesizes distributor pricing tiers, drop-in family alternatives, and practical design notes beyond the raw manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MC202T-I/SS - 16-bit 70MIPS DSC 256KB Flash | Microchip
DSPIC33EP256MC202T-I/SS

DSPIC33EP256MC202T-I/SS - 16-bit 70MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC202T-I/SS is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 70 MIPS performance, 256KB (85.5K x 24) of FLASH program memory, 16K x 16 (32 KB) of RAM, and a 3.0V to 3.6V supply, housed in a 28-pin SSOP (5.30 mm width) surface-mount package. A digital signal controller combines the compute architecture of a microcontroller with the math-acceleration capability of a digital signal processor. In the power-management hierarchy, DSCs occupy the space between general-purpose MCUs and dedicated DSPs: they execute C code with MCU-class peripherals while performing single-cycle MAC and DSP instructions needed for control-loop mathematics such as FOC (field-oriented control) motor algorithms and digital power compensation loops. Key features include the 70 MIPS dsPIC33E core with DSP engine, Motor Control PWM (MCPWM) peripherals, Quadrature Encoder Interface (QEI) inputs, and integrated analog: on-chip op amps, comparators, and a 10/12-bit Analog-to-Digital converter channel set (6 channels per distributor data). These peripherals eliminate external analog signal-conditioning ICs in motor-drive front ends, reducing board area and BOM cost. Technical depth: the dsPIC33EP architecture features a modified Harvard 16-bit core with pipelined instruction execution, single-cycle 16x16 MAC, hardware divide support, and 24-bit instruction words fetched from self-programmable FLASH. Connectivity covers I2C, SPI, UART/USART, IrDA, and LINbus. Operating range is -40C to +85C (I temperature grade), with 21 general-purpose I/O lines. Typical applications include precision sensorless and sensored motor control (BLDC, PMSM, stepper), digital power supplies and solar inverters, industrial automation nodes, and embedded systems requiring DSP filtering on analog inputs. Design consideration: this tape-and-reel T-suffix part suits volume assembly; pair with 100nF decoupling on each VDD and place the VCAP/VDDCORE capacitor per the datasheet for stable core regulation. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet, as of 2026-09-24.

견적 요청 문의하기
DSPIC33EP256MC204-E/ML - 16-bit 60 MIPS DSC 256KB Flash | Microchip
DSPIC33EP256MC204-E/ML

DSPIC33EP256MC204-E/ML - 16-bit 60 MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC204-E/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 60 MIPS performance with 256 KB (85.5K x 24) of Flash program memory and 32 KB of SRAM, housed in a 44-pin QFN (8x8 mm) package with exposed pad and an extended operating temperature range of -40C to +125C. A digital signal controller combines the computing characteristics of a microcontroller (MCU) with the arithmetic capabilities of a digital signal processor (DSP). In the power-management hierarchy, the DSC sits above general-purpose MCUs for control-loop-intensive tasks: its DSP engine, hardware multiply-accumulate and high-speed PWM peripherals make it the natural controller class for precision motor control, digital power conversion and sensor signal conditioning. Key features of the DSPIC33EP256MC204-E/ML include a 16-bit dsPIC33E core running at up to 60 MIPS, motor-control PWM (MCPWM) peripherals with complementary outputs and dead-time control, quadrature encoder interface (QEI) inputs for rotor position feedback, and integrated analog blocks including op amps and comparators that reduce external component count. The device operates from a single 3 V to 3.6 V supply (3.3 V nominal) and provides 35 general-purpose I/O lines. Technically, the dsPIC33EP architecture is a modified Harvard core with a 24-bit instruction word, hardware DSP multiply-accumulate (MAC) instructions, and two address generation units. On-chip peripherals such as the MCPWM module generate center-aligned or edge-aligned drive waveforms for brushless DC, PMSM and ACIM motors, while the QEI decodes incremental encoder signals for closed-loop field-oriented control (FOC). Typical applications include brushless DC and PMSF motor drives, switch-mode power supplies and digital lighting (LED/HID ballasts), industrial automation nodes, and embedded control systems requiring extended temperature operation. Design consideration: the 3.0-3.6 V supply requires a clean, well-decoupled 3.3 V rail; add 0.1 uF ceramic decoupling on every VDD/VSS pair and place the exposed pad thermal/ground connection on a solid PCB ground pour. This page synthesizes distributor pricing, same-family drop-in options, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
DSPIC33EP256MC204-H/PT - 16-bit DSC, 256KB Flash, 44-TQFP | Microchip
DSPIC33EP256MC204-H/PT

DSPIC33EP256MC204-H/PT - 16-bit DSC, 256KB Flash, 44-TQFP | Microchip

The Microchip Technology DSPIC33EP256MC204-H/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family featuring 256 KB of Flash program memory, 32 KB of SRAM, and a high-performance DSP core clocked at up to 60 MHz (70 MIPS peak instruction rate), housed in a 44-pin TQFP (PT) surface-mount package and classified as automotive AEC-Q100 grade. A digital signal controller combines the computational architecture of a microcontroller with the DSP engine of a digital signal processor. In the embedded control hierarchy, the dsPIC33EP sits between general-purpose MCUs and dedicated DSPs: it executes single-cycle MAC and DSP instructions while retaining deterministic interrupt-driven control peripherals, making it the preferred class of device for closed-loop control systems that also need signal processing such as filtering, transforms, or sensor fusion. Key features include the 256 KB self-programmable Flash (85.5K x 24-bit instruction words per distributor listings), 32 KB of on-chip SRAM, five 16-bit timers, and four direct memory access (DMA) channels that offload peripheral data transfers from the CPU. The MC suffix denotes the motor-control variant, integrating high-speed PWM modules, a 12-bit/500 ksps or 10-bit/1.1 Msps ADC with flexible trigger sources, comparators, and on-chip op amps with direct ADC connection for current-sense amplification in motor drives. Technically, the dsPIC33E core is a modified Harvard architecture executing most instructions in a single cycle, with hardware loop support and X/Y data buses that feed the DSP multiply-accumulate unit. The advanced analog front end allows current shunt signals to be amplified internally and sampled precisely at PWM-centered trigger instants, minimizing noise and reducing external component count in FOC (field-oriented control) motor systems. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, power factor correction and digital power supplies, and industrial automation nodes requiring deterministic control plus DSP math. The 44-pin TQFP provides enough I/O for multiple PWM phases, encoder quadrature inputs, and communication peripherals. Design consideration: the -H/PT ordering code denotes the automotive/AEC-Q100 qualified, 44-TQFP packaged option; verify supply voltage (3.0 V to 3.6 V nominal core family range), programming pair selection for PGECx/PGEDx in-circuit serial programming, and decoupling of all VDD/VSS pin pairs per the family data sheet. This page synthesizes verified distributor data, same-family drop-in alternatives, pricing tiers, FAQs, and motor-control design notes not consolidated on the manufacturer product page alone.

견적 요청 문의하기
DSPIC33EP256MC204-I/ML - 70MIPS 256KB Flash DSC | Microchip
DSPIC33EP256MC204-I/ML

DSPIC33EP256MC204-I/ML - 70MIPS 256KB Flash DSC | Microchip

The Microchip Technology DSPIC33EP256MC204-I/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP MC (Motor Control) family, delivering 70 MIPS performance with 256 KB (85.5K x 24) of Flash program memory and 32 KB (16K x 16) of SRAM in a 44-pin QFN (8x8 mm) surface-mount package operating from a 3.0 V to 3.6 V supply. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral integration and deterministic control behavior of a microcontroller (MCU). Within the power-management hierarchy, the dsPIC33EP MC family sits at the top of Microchip's 16-bit embedded control portfolio, purpose-built for closed-loop motor control and power-conversion algorithms such as field-oriented control (FOC). Key features of this device include a 16-bit Harvard-architecture dsPIC core with integrated DSP multiply-accumulate instructions, high-speed PWM peripherals for motor drive, advanced analog functionality, and connectivity interfaces including I2C, SPI, UART/USART, IrDA, LIN bus, and Quadrature Encoder Interface (QEI). The -I suffix denotes an industrial operating temperature range of -40C to +85C. Architecturally, the dsPIC33EP core executes most instructions in a single cycle and pairs hardware loop support with two 40-bit accumulators, enabling efficient execution of PID loops, Clarke/Park transforms, and filter functions without external DSP assistance. The Flash is rated for the erase/write cycles specified in the family data sheet DS70000657J. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies and PFC stages, inverters, and industrial automation nodes. The dedicated motor-control PWM and QEI peripherals make it a natural fit for servo and e-bike controllers. Design consideration: pin-selectable peripheral remapping (PPS) provides layout flexibility, but verify QFN thermal pad grounding for heat dissipation at 70 MIPS operation. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
DSPIC33EP256MC204-I/TL - 16-bit DSC 256KB 70MIPS | Microchip
DSPIC33EP256MC204-I/TL

DSPIC33EP256MC204-I/TL - 16-bit DSC 256KB 70MIPS | Microchip

The Microchip Technology DSPIC33EP256MC204-I/TL is a 16-bit digital signal controller (DSC) delivering 70 MIPS from a dsPIC33E core with 256 KB (85.5K x 24) of FLASH program memory, 32 KB of RAM, and motor-control peripherals, housed in a 44-pin VTLA (6x6 mm) surface-mount package. A digital signal controller combines the computational elements of a microcontroller - flash memory, SRAM, GPIO, and serial peripherals - with the numeric horsepower of a DSP, including a 24-bit instruction word, DSP multiply-accumulate instructions, and a barrel shifter. In the power-management hierarchy, the dsPIC33EP256MC204 sits above basic MCUs and below standalone DSPs, making it the standard choice for real-time embedded control systems such as motor drives and digital power conversion. Key features include the 70 MIPS dsPIC33E core running at 60 MHz, 256 KB of self-programmable FLASH with ECC support, and an integrated peripheral set purpose-built for motor control: MCPWM (motor control PWM), QEI (quadrature encoder interface), on-chip op amps, and comparators. Communication coverage spans I2C, SPI, UART/USART, IrDA, and LINbus, and in-circuit serial programming (ICSP) is supported via multiple PGECx/PGEDx pin pairs. Technically, the device executes a fixed-point instruction set with hardware DSP instructions and a barrel shifter, and includes boundary-scan capability for board-level test. The 44-VTLA 6x6 mm QFN-style package keeps parasitic inductance low for fast PWM switching and offers a compact footprint for space-constrained drives. Typical applications include BLDC and PMSM motor control, digital power supplies (PFC, LLC), sensorless FOC drives, and industrial automation nodes requiring encoder feedback via QEI. Design consideration: the /I temperature grade covers -40C to +85C; for ambient extremes beyond this range, select the /E (-40C to +125C) variant, and connect all VDD/VSS pairs as required by the datasheet. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MC204T-E/ML - 16-bit 60MIPS DSC 256KB Flash | Microchip
DSPIC33EP256MC204T-E/ML

DSPIC33EP256MC204T-E/ML - 16-bit 60MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC204T-E/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 60 MIPs performance with 256KB (85.5K x 24) of Flash program memory and 32KB of RAM, housed in a 44-pin QFN (8x8 mm) package with exposed pad. This tape-and-reel automotive-qualified part operates from a 3.3V supply and is AEC-Q100 qualified for automotive applications. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and control flexibility of a microcontroller. Within the embedded control hierarchy, the dsPIC33EP sits above general-purpose 8-bit MCUs and alongside 16-bit MCU families, targeting real-time control loops where fast multiply-accumulate operations are needed, such as field-oriented motor control and digital power conversion. Key features include a 16-bit dsPIC RISC core operating at 60 MIPs, 256KB of ECC-free Flash, 32KB of on-chip SRAM, 4 DMA channels, 5 timers, up to 3 external interrupts, and high-speed PWM peripherals purpose-built for precision motor control. Connectivity spans I2C, SPI, UART/USART, IrDA, LINbus, and QEI (quadrature encoder interface) for servo feedback. The dsPIC33EP architecture pairs a modified Harvard bus with DSP-class instructions (MAC, DSP multiply) that accelerate control algorithms. The high-resolution PWM module with dead-time insertion and fault inputs makes closed-loop FOC and BLDC control feasible without external companion ICs. Advanced analog integration reduces bill-of-materials count in power electronics designs. Typical applications include brushless DC and PMSM motor drives, digital power supplies (LLC, totem-pole PFC), automotive actuator control, and industrial automation nodes requiring deterministic real-time response and encoder feedback. Design consideration: the 44-QFN exposed pad must be soldered to a grounded copper pour for both thermal dissipation and signal integrity; respect the 3.3V supply rail and decouple all VDD/VDDCORE pins per the manufacturer datasheet. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone, with pricing verified as of 2026-09-24.

견적 요청 문의하기
DSPIC33EP256MC204T-E/PT - 60 MIPS 16-bit DSC 256KB Flash | Microchip
DSPIC33EP256MC204T-E/PT

DSPIC33EP256MC204T-E/PT - 60 MIPS 16-bit DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC204T-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family delivering 60 MIPS performance with 256KB (85.5K x 24) of Flash program memory, 16KB of RAM, and a 44-pin TQFP (10x10 mm) package operating from 3V to 3.6V. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power management hierarchy of embedded systems, the DSC sits between general-purpose MCUs and dedicated DSPs: it executes single-cycle MAC and DSP instructions for control-loop mathematics while retaining interrupt-driven firmware structures, making the dsPIC33 family a common choice for motor control, digital power conversion, and sensing applications. Key features include the 16-bit dsPIC33E core running at 60 MIPS, high-speed PWM modules suited to motor control and power conversion, and connectivity peripherals covering I2C, SPI, UART/USART, IrDA, LINbus, and QEI (quadrature encoder interface). The QEI peripheral is particularly significant: it decodes encoder feedback in hardware, offloading the CPU for the field-oriented control (FOC) mathematics required in precision servo drives. Technically, the dsPIC33EP series integrates DSP engine features such as single-cycle MAC, dual operand fetch, and a modified Harvard architecture with a 24-bit instruction word. The -E/PT ordering code denotes the extended temperature range (-40C to +125C) in a tape-and-reel packaged 44-pin TQFP. Per Microchip product data, this device is AEC-Q100 qualified, supporting automotive and harsh-environment industrial designs. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies and PFC stages, automotive body and powertrain auxiliaries, and industrial sensors requiring the QEI encoder interface combined with DSP-grade control loops. A key design consideration: the core runs from a 3.0V to 3.6V supply, so level shifting is required when interfacing with 5V logic; decouple each VDD/VSS pair with 0.1uF ceramics placed at the TQFP corners. This page synthesizes distributor availability data, drop-in alternatives within the same 44-TQFP footprint, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MC204T-E/TL - 16-bit 60 MIPS DSC, 256KB Flash | Microchip
DSPIC33EP256MC204T-E/TL

DSPIC33EP256MC204T-E/TL - 16-bit 60 MIPS DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC204T-E/TL is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 60 MIPS performance with 256KB (85.5K x 24) of FLASH program memory and 16K x 16 of RAM, housed in a 44-pin VTLA exposed-pad QFN package measuring 6x6 mm and qualified to AEC-Q100 for automotive use. A digital signal controller combines the computational architecture of a microcontroller with the mathematical capability of a DSP. In the power-management hierarchy of embedded systems, a DSC sits between a general-purpose MCU and a dedicated DSP: it runs real-time control loops (current, speed, position) while also handling communication, state machines, and housekeeping tasks. The dsPIC33E family from Microchip is designed specifically for digital power conversion and precision motor control, where deterministic interrupt latency and hardware PWM matter more than raw clock speed. Key features of the DSPIC33EP256MC204T-E/TL include Motor Control PWM peripherals with complementary outputs and dead-time insertion, a Direct Memory Access (DMA) controller that offloads data movement from the CPU, and multiple serial interfaces: I2C, SPI, UART/USART, IrDA, and LINbus. The supply range is 3V to 3.6V, and the -E temperature suffix denotes -40C to +125C operation, aligned with AEC-Q100 Grade 1 style automotive requirements. Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with DSP multiply-accumulate instructions, enabling single-cycle MAC operations for filter and transform algorithms such as FOC (field-oriented control) mathematics, PI regulators, and SVPWM generation. The DMA channels can feed ADC results directly to RAM buffers, minimizing jitter in control loops. Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) drives, digital power supplies (PFC, LLC, buck converters), automotive body and powertrain auxiliary modules, and industrial inverters. The Motor Control PWM and QEI support make it a natural fit for sensorless and encoder-based motor systems. When designing with this device, budget the 3.3V rail carefully - the part does not tolerate 5V on VDD - and use the exposed pad as a low-inductance ground connection. Decouple each VDD pin with 0.1uF ceramics placed within 2 mm of the pins. This page synthesizes distributor pricing, drop-in family alternatives, and practical motor-control design notes not consolidated in the manufacturer datasheet, with data verified as of 2026-09-24.

견적 요청 문의하기
DSPIC33EP256MC204T-I/ML - 16-bit 70 MIPS DSC 256KB Flash | Microchip
DSPIC33EP256MC204T-I/ML

DSPIC33EP256MC204T-I/ML - 16-bit 70 MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC204T-I/ML is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 70 MIPS performance, 256KB (85.5K x 24) of Flash program memory and 32KB of RAM, housed in a 44-pin QFN (8x8 mm) exposed-pad package. A digital signal controller combines the compute architecture of a microcontroller with the DSP engine of a digital signal processor. In the power-management hierarchy, the dsPIC33EP family sits above basic MCUs: its 16-bit dsPIC core adds single-cycle MAC, DSP multiply-accumulate and modulo addressing, making it a natural fit for closed-loop control systems such as field-oriented motor control and digitally controlled power supplies, where a plain MCU would struggle with control-loop math. Key features include the 70 MIPS dsPIC33EP core with integrated DSP engine, on-chip Motor Control PWM (MCPWM) peripherals with complementary outputs and dead-time control, quadrature encoder interface (QEI) inputs for motor feedback, integrated operational amplifiers and comparators for current sensing, and an industrial temperature rating of -40C to +85C denoted by the /I suffix. Technical depth: the dsPIC33E architecture pipelines instruction fetch and execution so that DSP instructions execute in a single cycle at 70 MIPS. The high-speed PWM module supports center-aligned and edge-aligned modes essential for space-vector PWM in three-phase inverters. The analog front-end (op amps, comparators, high-speed 10/12-bit ADC) allows direct current-shunt sensing without external amplifier ICs, reducing BOM count in motor drive designs. Typical applications include brushless DC and PMSM motor drives, solar inverters and digital power conversion, and embedded sensing systems that need DSP-class math. The T suffix denotes tape-and-reel packaging for automated assembly. Design consideration: the 44-QFN exposed pad must be soldered to a grounded copper pour for both thermal dissipation and signal integrity; the part runs from a single 3.3V supply with a 3.6V absolute maximum, so 5V-tolerant considerations apply to I/O design. This page synthesizes distributor pricing, drop-in family alternatives, and practical motor-control design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
DSPIC33EP256MC204T-I/MV - 16-Bit 70 MIPS DSC 256KB Flash | Microchip
DSPIC33EP256MC204T-I/MV

DSPIC33EP256MC204T-I/MV - 16-Bit 70 MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC204T-I/MV is a 16-bit digital signal controller (DSC) delivering up to 70 MIPS dsPIC33E core performance, with 256KB (85.5K x 24) of Flash program memory and 32KB of RAM, housed in a 48-pin UQFN (6x6 mm) package (MV suffix). A digital signal controller combines the computational capability of a digital signal processor with the peripheral integration and interrupt architecture of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC sits between general-purpose MCUs and dedicated DSPs, making it the dominant controller class for closed-loop motor control, digital power conversion, and sensor signal processing where deterministic math and rich analog peripherals must coexist. Key differentiating features include the MCPWM (Motor Control PWM) module with complementary outputs and dead-time insertion, a Quadrature Encoder Interface (QEI) for position feedback, integrated operational amplifiers and high-speed comparators that feed directly into the ADC, and a PTG (Programmable Timing Generator) peripheral. The ADC is configurable as 10-bit at 1.1 Msps with four sample-and-hold circuits or 12-bit at 500 ksps with one sample-and-hold. Architecturally, the device uses a modified Harvard, 16-bit pipelined core with DSP engine (single-cycle MAC, 40-bit accumulators), 4 DMA channels, 5 timers, and connectivity including I2C, SPI, UART/USART, IrDA, and LINbus. Up to three op amp/comparator channels with programmable 32-point references enable compact analog front ends without external amplifiers. Typical applications include brushless DC and PMSM motor drives, digital power supplies and solar inverters, and industrial automation nodes requiring encoder feedback and precise PWM timing. The industrial temperature range (-40C to +85C) suits factory-floor environments. Design consideration: the core requires the VCAP pin to be connected to a low-ESR capacitor for the internal 2.5V regulator; omitting it prevents startup. Budget 3.0V to 3.6V supply rails. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MC204T-I/TL - 70 MIPS 16-bit DSC 256KB Flash | Microchip
DSPIC33EP256MC204T-I/TL

DSPIC33EP256MC204T-I/TL - 70 MIPS 16-bit DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC204T-I/TL is a 16-bit digital signal controller (DSC) delivering 70 MIPS performance with 256 KB (85.5K x 24) of Flash program memory, 16 KB of RAM, and 44 pins in the VTLA (6x6 mm) QFN package with exposed pad, operating from 3.3 V (3.0 V to 3.6 V) across the industrial -40C to +85C temperature range. A digital signal controller combines the deterministic control of a microcontroller (MCU) with the mathematical throughput of a digital signal processor (DSP). Within the power-management hierarchy of embedded systems, the DSC sits between general-purpose MCUs and dedicated DSPs, making it the preferred choice for closed-loop control loops such as field-oriented motor control, digital power conversion, and sensor fusion, where fast multiply-accumulate operations and high-resolution PWM must coexist with real-time interrupt servicing. Key features of this dsPIC33EP256MC204 device include the 70 MIPS dsPIC33E core with DSP engine, high-speed PWM peripherals purpose-built for precision motor control, integrated analog and communication interfaces including I2C, SPI, UART/USART, IrDA, LINbus, and QEI (quadrature encoder interface). The 256 KB Flash supports field reprogramming, and the tape-and-reel suffix (T) supports automated high-volume assembly. Architecturally, the dsPIC33EP family belongs to Microchip's 16-bit portfolio and shares the DS70000657 family data sheet with the dsPIC33EPXXXGP50X and dsPIC33EPXXXMC20X/50X families. The MC (Motor Control) suffix indicates the motor-control peripheral set, and the 44-VTLA 6x6 package with exposed pad provides low-inductance ground return for switching-heavy designs. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, digital power supplies and solar inverters, and industrial automation nodes requiring encoder feedback via QEI. The 70 MIPS headroom supports field-oriented control (FOC) executed at loop rates of 10 kHz or higher. Design consideration: at 44 pins, GPIO budget is shared with the PWM, QEI, and communication peripherals, so perform a pin-budget analysis early; the exposed pad must be soldered to a ground pour for thermal and signal-integrity performance. This page synthesizes distributor listings, drop-in alternatives, and design guidance not found in the manufacturer datasheet, with pricing and availability verified as of 2026-09-24.

견적 요청 문의하기
DSPIC33EP256MC206-E/MR - 16-bit 60 MIPS DSC, 256KB Flash | Microchip
DSPIC33EP256MC206-E/MR

DSPIC33EP256MC206-E/MR - 16-bit 60 MIPS DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC206-E/MR is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 60 MIPS performance from a 256 KB (85.5K x 24) FLASH program memory and 32 KB SRAM, housed in a 64-pin VQFN (9x9 mm) package with an exposed thermal pad and automotive -40C to +125C temperature rating. A digital signal controller combines the computational architecture of a microcontroller with the numeric acceleration of a DSP. In the product hierarchy, the dsPIC33EP sits within the 16-bit embedded control family: DSC -> microcontroller -> embedded processor. It executes a modified Harvard architecture with a DSP engine, enabling single-cycle MAC and multiply operations alongside deterministic real-time control loops. Key features include the 16-bit dsPIC33E core running at up to 60 MIPS (from a 3.0V to 3.6V supply), 256 KB of self-programmable FLASH, 32 KB of RAM, on-chip operational amplifiers (per Mouser: 64P OpAmps variant feature set), high-speed PWM modules, and advanced analog peripherals tailored to motor control. The -E suffix denotes the automotive-grade operating temperature range of -40C to +125C, and the part is listed by distributors as AEC-Q100 qualified for automotive applications. Architecturally, the dsPIC33EP core supports DSP instructions, flexible interrupt handling, and clock switching with a PLL multiplying an internal or external source to the 60 MIPS maximum (60 MHz instruction-clock domain noted by Mouser). Enhanced peripherals offload the CPU in closed-loop systems, which is essential for field-oriented motor control where the control loop period is measured in microseconds. Typical applications include precision brushless DC and PMSM motor drives, digital power conversion (PFC, inverters), automotive auxiliary motor control, and industrial sensing and automation nodes where a single chip must perform both control and signal processing. Design consideration: the VQFN exposed pad is the primary thermal and ground path - solder it to a solid ground pour with thermal vias to guarantee the -E grade thermal performance. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
DSPIC33EP256MC206-I/PT - 70 MIPS 16-bit DSC, 256KB Flash | Microchip
DSPIC33EP256MC206-I/PT

DSPIC33EP256MC206-I/PT - 70 MIPS 16-bit DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC206-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP256MC206 family, delivering up to 70 MIPS dsPIC DSC core performance with 256KB of Flash program memory, 32KB of RAM, and a 64-pin TQFP (10x10 mm) package. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and control architecture of a microcontroller. Within the power-management hierarchy, a DSC sits above a basic MCU: it adds single-cycle MAC and DSP instructions, high-resolution PWM modules, and fast analog peripherals, making it the standard choice for closed-loop motor control and digital power conversion where both computation speed and precise timing are required. Key features of the DSPIC33EP256MC206-I/PT include integrated operational amplifiers, a high-speed 12-bit ADC, high-speed PWM peripherals, and connectivity via I2C, SPI, UART/USART, IrDA, LIN bus, and quadrature encoder interface (QEI). DMA channels offload data movement, while brown-out detect/reset and low-power modes support robust industrial designs. The operating voltage range is 3.0V to 3.6V, and the I-grade temperature range spans -40C to +85C. The dsPIC33E core executes most instructions in a single cycle with hardware DSP support, and Peripheral Pin Select (PPS) allows remapping of many digital peripherals onto flexible I/O pins, simplifying board layout and reducing routing conflicts. Flash self-programming supports field firmware updates, and ICSP/ICD debug access is available through any PGECx/PGEDx pin pair. Typical applications include brushless DC and PMSM motor control (sensorless and sensored, using QEI plus high-speed PWM), digital power supplies (PFC, LLC, solar micro-inverters), and industrial automation nodes requiring CAN-free but multi-protocol serial connectivity. Design consideration: all VDD and VSS pins must be connected and decoupled; when using ICSP, the selected PGECx pin must be paired with the matching PGEDx pin. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MC206T-I/MR - 70 MIPS 16-bit DSC, 256KB | Microchip
DSPIC33EP256MC206T-I/MR

DSPIC33EP256MC206T-I/MR - 70 MIPS 16-bit DSC, 256KB | Microchip

The Microchip Technology DSPIC33EP256MC206T-I/MR is a 16-bit digital signal controller (DSC) from the dsPIC33EP256MC206 device, featuring a 70 MIPS dsPIC DSC core, 256KB (85.5K x 24) of flash program memory and 3.3V operation, housed in a 64-pin VQFN with exposed pad (MR package suffix), supplied in tape-and-reel packaging. A digital signal controller combines the control peripherals of a microcontroller with the mathematical throughput of a DSP in a single Harvard-architecture device. In the power-management hierarchy, the dsPIC33EP family sits above general-purpose PIC16/PIC24 MCUs and below dedicated DSPs, making it a popular choice for embedded control systems that need both fast interrupt response and single-cycle MAC (multiply-accumulate) DSP instructions for control-loop filtering. Key features of the dsPIC33EP256MC206 include the 16-bit dsPIC33E core with DSP engine, on-chip high-speed PWM modules suited to motor control, integrated op amps and advanced analog peripherals per the family data sheet, and connectivity peripherals including I2C, SPI, UART/USART, IrDA, LINbus and QEI (quadrature encoder interface), as listed on the Microchip product page and distributor listings. Architecturally, the dsPIC33E core executes most instructions in a single cycle at up to 70 MIPS, and the MC (motor control) subfamily adds high-resolution PWM with dead-time control and fault inputs essential for driving three-phase inverters. The 85.5K x 24 flash organization supports self-programming for field firmware updates, while the RAM provides workspace for control loops and DSP buffers. Typical applications include brushless DC and PMSM motor drives, digital power supplies (PFC, LLC), solar inverters, and industrial automation nodes requiring encoder feedback via QEI. The 64-pin VQFN offers a compact 9x9 mm footprint with exposed pad for thermal and ground integrity. Design consideration: connect every VDD and VSS pin pair on the 64-pin device; per Microchip documentation (northernsoftware.com), leaving any supply pin unconnected can cause programming or debugging failures. This page synthesizes distributor availability, same-package alternatives, and practical design notes beyond what the manufacturer datasheet provides. Pricing below is an estimate as of 2026-09-24; confirm live pricing with distributors.

견적 요청 문의하기
DSPIC33EP256MC502-E/SP - 16-bit 60MHz DSC, 256KB Flash | Microchip
DSPIC33EP256MC502-E/SP

DSPIC33EP256MC502-E/SP - 16-bit 60MHz DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC502-E/SP is a 16-bit digital signal controller (DSC) with a 60 MHz dsPIC33E core delivering 70 MIPS performance, 256 KB of Flash program memory, 32 KB of SRAM, and a rich motor-control peripheral set, housed in a 28-pin SPDIP through-hole package with extended temperature operation (-40C to +125C). A digital signal controller combines the compute throughput of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the dsPIC33E family sits above general-purpose MCUs and below standalone DSPs: it merges a 16-bit CPU with DSP engine (single-cycle MAC, 40-bit accumulators), high-speed PWM modules, and advanced analog, making it a single-chip solution for embedded control systems. Key features include the MCPWM (Motor Control PWM) module for complementary or independent PWM generation with dead-time insertion, a quadrature encoder interface (QEI) for position feedback, integrated operational amplifiers and comparators that reduce external BOM cost, a 12-bit ADC, CAN 2.0B for industrial networking, a 4-channel DMA controller, and the Peripheral Trigger Generator (PTG) for hardware-sequenced autonomous operation. Architecturally, the dsPIC33EP core executes from zero-wait-state Flash at up to 70 MIPS with DSP instructions and hardware division, while the ECC-free 256 KB Flash supports self-programming for bootloaders. The multiple interrupt vectors and shadow registers deliver deterministic latency, essential for current-loop control at 20-50 kHz sampling rates in field-oriented motor drives. Typical applications include PMSM/BLDC/ACIM precision motor control (washing machines, HVAC blowers, pumps), digital power supplies and PFC stages, and industrial automation nodes requiring CAN connectivity. The extended -40C to +125C rating suits harsh industrial and automotive-adjacent environments. Design consideration: as a through-hole SPDIP part, this suffix is favored for prototyping and legacy repair; the VQFN/SOIC/MM suffixes (e.g., DSPIC33EP256MC502-E/MM) provide the same die for production SMT. Decouple VDD/VDDCORE via the VCAP pin per the datasheet. This page synthesizes distributor availability, drop-in same-footprint alternatives, and practical design notes beyond the manufacturer datasheet, with pricing as of 2026-09-24.

견적 요청 문의하기
DSPIC33EP256MC502-H/SO - 16-Bit DSC 256KB Flash | Microchip
DSPIC33EP256MC502-H/SO

DSPIC33EP256MC502-H/SO - 16-Bit DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC502-H/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, featuring a 70 MIPS dsPIC DSC core with integrated DSP engine, 256 KB Flash program memory, 32 KB RAM, and a 28-pin SOIC (0.295 in / 7.50 mm) package. It is AEC-Q100 qualified for automotive and high-temperature operation, with the H suffix denoting extended temperature range. A digital signal controller is a hybrid device that combines the real-time control capabilities of a microcontroller with the mathematical throughput of a digital signal processor. In the product hierarchy, the dsPIC33EP256MC502 sits within the dsPIC33E family of DSCs, which itself belongs to the broader class of 16-bit microcontrollers and digital signal controllers. Unlike a general-purpose MCU, a DSC executes DSP instructions such as single-cycle multiply-accumulate (MAC) and barrel shifting, enabling deterministic control loops for motor drive and power conversion. Key features include a 70 MIPS core, 256 KB Flash, 32 KB SRAM, high-speed PWM modules, up to three op-amp/comparator pairs with direct ADC connection, and a 10-bit/12-bit ADC configurable for 1.1 Msps with four sample-and-hold channels. The device supports 4 DMA channels, 5 timers, and 3 external interrupts, and includes boundary scan and low-power modes. The dsPIC33EP256MC502 is designed for precision motor control, digital power conversion, and automotive sensorless field-oriented control (FOC). Its high-speed PWM and integrated analog peripherals reduce external component count, while the 70 MIPS core provides headroom for complex control algorithms such as PID, Clarke/Park transforms, and space-vector modulation. Typical applications include brushless DC (BLDC) motor drives, automotive pumps and fans, industrial servo control, and switched-mode power supplies. The AEC-Q100 qualification and extended temperature range make it suitable for under-hood automotive electronics. When designing with this device, ensure the ICSP programming pins (PGECx/PGEDx) are accessible and correctly paired, and provide adequate decoupling on all VDD/VSS pins. The 28-pin SOIC package offers a balance between pin count and board space for compact motor-control designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a single reference for selection and replacement decisions.

견적 요청 문의하기
DSPIC33EP256MC502-H/SP - 16-bit 256KB Flash DSC 70 MIPS | Microchip
DSPIC33EP256MC502-H/SP

DSPIC33EP256MC502-H/SP - 16-bit 256KB Flash DSC 70 MIPS | Microchip

The Microchip Technology DSPIC33EP256MC502-H/SP is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 70 MIPS core performance with 256 KB Flash program memory, 32 KB RAM, and integrated op-amp and high-speed PWM peripherals, housed in a 28-pin SPDIP package rated for 3.3V operation. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration, interrupt architecture, and deterministic control behavior of a microcontroller. Within the power-management hierarchy of embedded systems, DSCs occupy the tier specialized for closed-loop control: unlike general-purpose MCUs, they integrate DSP-engine MAC instructions, high-resolution PWM modules, and fast ADCs on a single die. The dsPIC33E family sits between Microchip's general-purpose PIC16/PIC18 MCUs and its 32-bit SAM/ARM portfolios, targeting real-time control workloads. Key features of this device include the 70 MIPS dsPIC DSC core with DSP instruction support, 256 KB of self-programmable Flash with ECC, 32 KB of SRAM, multiple high-speed PWM outputs suited to complementary motor-drive switching, and on-chip analog integration highlighted as 'OpAmps' in distributor parametrics. Multiple PGECx/PGEDx pin pairs enable in-circuit serial programming (ICSP) and debugging via any matched PGEC/PGED pair, as documented by Microchip. Architecturally, the dsPIC33EP core executes an enhanced 16-bit RISC instruction set with two 40-bit accumulators and hardware multiply-accumulate, allowing filter and transform kernels (PID, Clarke/Park transforms) to run deterministically at full clock rate. A 4-channel DMA controller offloads data movement between peripherals and RAM, reducing interrupt latency during high-rate ADC sampling cycles. Typical applications include precision BLDC and PMSM motor control for industrial drives, automotive subsystems where the AEC-Q100 qualification noted in distributor data is required, and power-conversion products such as digital power supplies and inverters. The through-hole SPDIP-28 package makes the part especially practical for prototyping, breadboarding, and legacy industrial boards. When designing with this device, budget the 3.3V rail for all VDD/AVDD pins, decouple each supply pin with 0.1 uF ceramics, and pair ICSPCLK/ICSPDAT consistently with a single PGEC/PGED pair during programming. This page synthesizes distributor pricing context, drop-in same-package alternatives, pinout guidance, and practical design notes not consolidated in the manufacturer datasheet alone.

견적 요청 문의하기
DSPIC33EP256MC502-I/SS - 16-bit 70 MIPS DSC, 256KB Flash | Microchip
DSPIC33EP256MC502-I/SS

DSPIC33EP256MC502-I/SS - 16-bit 70 MIPS DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC502-I/SS is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 70 MIPS performance with 256 KB (85.5K x 24) of Flash program memory and 32 KB of RAM, housed in a 28-pin SSOP surface-mount package rated for -40C to +85C operation. A digital signal controller combines the compute throughput of a DSP engine with the peripheral integration and deterministic control of a microcontroller. Within the power management hierarchy, a DSC sits above basic MCUs in the embedded control chain: MCU -> digital signal controller -> application-specific motor/speech processor, making the dsPIC33E family a common choice where a single chip must both run control loops and execute DSP mathematics. Key features include the 16-bit dsPIC33E CPU core with DSP multiply-accumulate and barrel shifter, a 4-channel DMA controller that moves data without CPU intervention, and a motor-control PWM (MCPWM) module purpose-built for complementary and dead-time-weighted drive outputs. The device also integrates quadrature encoder interface (QEI) inputs, on-chip analog comparators, operational amplifiers, and a pseudo-terminal generator (PTG), reducing external component count in closed-loop designs. Technically, the dsPIC33EP core runs from an internal PLL multiplying an external crystal or internal FRC oscillator to 60 MHz device operation (70 MIPS instruction throughput), and supports multiple interrupt vectors with automatic context save for low-latency, deterministic ISR response. Flash programming and in-circuit debugging use ICSP via PGECx/PGEDx pin pairs. The industrial temperature grade (I suffix, -40C to +85C) and CMOS process give robust operation on a 3.0V to 3.6V single supply. Typical applications include precision brushless DC and PMSM motor control, digital power supplies (PFC, LLC), and embedded sensing and speech/audio processing, where the MCPWM, QEI, and DSP MAC units directly accelerate the control loop. Design consideration: verify that your ICSP programmer uses the PGECx/PGEDx pair as a matched pair; mixing PGEC2 with PGED1 is a common bring-up error. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MC502T-E/SO - 16-bit DSC 70 MIPS Motor Control | Microchip
DSPIC33EP256MC502T-E/SO

DSPIC33EP256MC502T-E/SO - 16-bit DSC 70 MIPS Motor Control | Microchip

The Microchip Technology DSPIC33EP256MC502T-E/SO is a 16-bit digital signal controller (DSC) delivering 70 MIPS from its dsPIC33E core, with 256 KB of Flash program memory, 32 KB of RAM, and a 28-pin SOIC package rated for -40C to +125C extended temperature operation. A digital signal controller combines the computational capability of a microcontroller with the arithmetic throughput of a digital signal processor. Within the power management hierarchy of embedded systems, a DSC sits above basic MCUs and is purpose-built for closed-loop control tasks such as field-oriented control (FOC) of motors, where fast multiply-accumulate operations and deterministic interrupt latency are essential. Key features of this device include the 70 MIPS dsPIC DSC core with integrated DSP engine, 256 KB Flash, on-chip MCPWM (motor control PWM) peripherals, quadrature encoder interface (QEI), a CAN module for industrial networking, two integrated operational amplifiers, and three analog comparators. These analog and timing peripherals reduce external component count in power conversion and motor drive designs. Architecturally, the dsPIC33EP family pairs the 16-bit CPU with pipelined DSP instructions, single-cycle MAC, and hardware division support, enabling real-time current loops at tens of kilohertz. The E temperature grade variant (-40C to +125C) extends operation into harsh industrial and automotive-adjacent environments where standard 0C to +70C parts cannot be used. Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) control, power factor correction stages, digital power supplies, and industrial automation nodes using CAN. The integrated op amps and comparators directly support current-sense signal chains common in inverter designs. When designing with this part, budget Flash and pin resources carefully: the 28-pin package multiplexes MCPWM, QEI, CAN, and UART functions on shared pins, so verify pin mapping early with Microchip's pin manager tooling. This page synthesizes verified distributor data, drop-in alternatives within the dsPIC33EP256MC502 family, pricing tiers, and practical design guidance not consolidated in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MC502T-I/MM - 70 MIPS 256KB DSC | Microchip
DSPIC33EP256MC502T-I/MM

DSPIC33EP256MC502T-I/MM - 70 MIPS 256KB DSC | Microchip

The Microchip Technology DSPIC33EP256MC502T-I/MM is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 70 MIPS (70 MHz) performance with 256 KB (85.5K x 24) of FLASH program memory and 16 KB of RAM, housed in a 28-pin QFN exposed-pad (MM) package rated 3.3V for the industrial -40C to +85C temperature range. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and deterministic interrupt architecture of a microcontroller, sitting in the system hierarchy between a general-purpose MCU and a dedicated DSP. The dsPIC33EP family adds an integrated DSP engine (single-cycle MAC, 40-bit accumulator, dual operand fetch) and advanced analog peripherals for real-time control loops. Key features include the 16-bit dsPIC33E core at up to 70 MIPS, motor-control PWM (MCPWM) with QEI quadrature encoder interface support, two integrated operational amplifiers, three comparators, and a rich connectivity set: CAN bus, I2C, SPI, UART/USART, IrDA, and LIN bus. The tape-and-reel (T) suffix and industrial (I) temperature grade make it suited for automated high-volume assembly. Architecturally, the device pairs the DSP engine with flexible peripheral pin select (PPS) routing, allowing digital peripherals to be remapped across I/O pins, which simplifies PCB layout and multi-board reuse. On-chip op amps and comparators reduce external analog component count in current-sense and protection circuits. Typical applications include precision motor control (BLDC/PMSM/ACIM drives with encoder feedback), digital power supplies and PFC stages, and industrial automation nodes leveraging the CAN interface. Design consideration: supply the core from the internal regulator using the required VCAP capacitor, and verify QFN exposed-pad grounding and thermal via arrays for best signal integrity and heat dissipation. This page synthesizes distributor availability data, same-package alternatives, and design guidance not found in the manufacturer datasheet alone.

견적 요청 문의하기
DSPIC33EP256MC502T-I/SO - 16-bit 70 MIPS DSC, 256KB Flash | Microchip
DSPIC33EP256MC502T-I/SO

DSPIC33EP256MC502T-I/SO - 16-bit 70 MIPS DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC502T-I/SO is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33EP core, 256KB (85.5K x 24) of Flash program memory, 32KB of data RAM, and integrated high-speed MCPWM, QEI, CAN, dual on-chip op amps and three comparators, housed in a 28-pin wide SOIC (WSOIC-28) package. The tape-and-reel suffix T supports automated surface-mount assembly. A digital signal controller combines the computational architecture of a microcontroller with the math acceleration of a DSP. Within the power-management hierarchy, the DSC sits above general-purpose MCUs because it integrates a DSP engine, single-cycle MAC, and high-resolution PWM peripherals purpose-built for real-time control loops. The dsPIC33EP family is Microchip's precision motor-control DSC generation, positioned between entry-level PIC MCUs and application-specific motor drivers. Key features include the 70 MIPS dsPIC DSC core with integrated DSP instruction set, 256KB of self-programmable Flash, and the findic-listed peripheral set: motor control PWM (MCPWM), quadrature encoder interface (QEI), CAN bus, two operational amplifiers, and three comparators. Communication coverage spans CAN, I2C, IrDA, LINbus, SPI, and UART/USART per Microchip USA product data, enabling gateway and drive-network designs from a single chip. Technically, the dsPIC33EP core executes an enhanced 16-bit instruction set at up to 70 MIPS, with DSP multiply-accumulate and modulo/bit-reversed addressing that accelerate Clarke/Park transforms and PID loops in field-oriented motor control. The integrated op amps allow current-sense amplification without external devices, and the high-speed PWM supports complementary outputs with dead-time control for BLDC, PMSM, and ACIM drives. Typical applications include brushless DC and permanent-magnet motor control, industrial automation drives, power supplies and digital power conversion, and automotive-adjacent control nodes using the CAN interface. Microchip explicitly positions the family for high-performance, energy-efficient, quieter precision motor control systems. A key design consideration is supply decoupling: place low-ESR ceramic capacitors directly across VDD/VSS pairs and provide solid ground returns for the analog op-amp and comparator inputs to preserve ADC accuracy in high PWM-noise environments. This page synthesizes distributor pricing, drop-in same-package alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
DSPIC33EP256MC504-E/ML - 16-bit DSC 256KB Flash 60MHz | Microchip
DSPIC33EP256MC504-E/ML

DSPIC33EP256MC504-E/ML - 16-bit DSC 256KB Flash 60MHz | Microchip

The Microchip Technology DSPIC33EP256MC504-E/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP family featuring a 70 MIPS DSP-enhanced core, 256 KB of Flash program memory, 32 KB of RAM, and operation up to 60 MHz in a 44-pin QFN with exposed pad (QFN-EP-44) package rated for the extended -40C to +125C temperature range. A digital signal controller combines the computational architecture of a microcontroller with the DSP engine of a digital signal processor. Within the power-management hierarchy, a DSC such as the dsPIC33EP256MC504 serves as the system-level control IC that executes closed-loop control algorithms for motors, power converters, and sensing systems, sitting above discrete analog control ICs and alongside general-purpose 16-bit microcontrollers. Key features include the 70 MIPS dsPIC DSC core with integrated DSP multiply-accumulate instructions, high-speed PWM peripherals tailored for precision motor control, on-chip operational amplifiers, and rich connectivity including CAN, I2C, SPI, UART/USART, IrDA, LINbus, and Quadrature Encoder Interface (QEI). The 256 KB Flash is organized as 85.5K x 24-bit instruction words, giving generous code headroom for field-updatable control firmware. Technically, the dsPIC33EP core pairs a 16-bit MCU pipeline with a dedicated DSP multiply-accumulator, allowing fixed-point filtering (FIR, PID, Clarke/Park transforms) to run alongside general control code without a second processor. The motor-control PWM module supports complementary outputs, dead-time insertion, and fault inputs, which are essential for brushless DC, permanent-magnet synchronous, and stepper motor drives. Typical applications include precision brushless DC and PMSM motor drives, digital power supplies and power factor correction converters, and industrial automation sensors requiring CAN connectivity. The integrated op-amps reduce external component count in current-sense front ends. Design consideration: the extended-temperature E-grade part must still respect the package power dissipation limits; provide adequate PCB copper under the exposed pad for thermal relief at high clock rates. This page synthesizes distributor data, datasheet references, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
DSPIC33EP256MC504-E/PT - 60 MIPS 16-bit DSC, 256KB Flash | Microchip
DSPIC33EP256MC504-E/PT

DSPIC33EP256MC504-E/PT - 60 MIPS 16-bit DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33EP256MC504-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 60 MIPS performance with 256KB (85.5K x 24) of Flash program memory and 32KB of RAM in a 44-pin TQFP (10x10 mm) package, operating from a 3.0V to 3.6V supply at an industrial -40C to +125C temperature grade. A digital signal controller combines the computational power of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits at the top of embedded control ICs: microcontroller -> microcontroller with DSP engine -> digital signal controller -> digital signal processor. The dsPIC33E family integrates an enhanced DSP engine (single-cycle MAC, 40-bit accumulators, dual operand fetch) with high-precision motor-control peripherals on one chip. Key features include the 60 MIPS dsPIC33E core, 256KB self-programmable Flash with ECC, 32KB SRAM, four DMA channels that offload data movement from the CPU, and dedicated high-speed PWM modules with dead-time control aimed at motor control and digital power conversion. Architecturally, the device is fabricated in CMOS and pairs a 16-bit CPU pipeline with an internal bus architecture. Flash program memory is addressed as 24-bit instruction words (85.5K x 24), and the DSP engine supports fractional and integer MAC operations essential for FOC (field-oriented control), PID loops, and digital filtering. Typical applications include BLDC/PMSM/ACIM motor drives, solar inverters and digital power supplies, UPS systems, and industrial automation nodes where sensorless or encoder-based control loops must execute at high sample rates. Design consideration: this 44-pin TQFP version provides a reduced GPIO count versus 64/80-pin siblings, so budget I/O carefully when mapping high-speed PWM outputs, quadrature encoder inputs, and communication ports. This page synthesizes distributor pricing, same-footprint drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기