마이크로컨트롤러

제품 (20,000+)

P4080NSE7PNAC - QorIQ P4 8-Core 1.5GHz SoC | NXP | Networking
P4080NSE7PNAC

P4080NSE7PNAC - QorIQ P4 8-Core 1.5GHz SoC | NXP | Networking

The NXP P4080NSE7PNAC is a QorIQ P4 communications processor featuring eight PowerPC e500mc cores running at 1.5 GHz, integrated into a 1295-ball FCBGA package measuring 37.5 x 37.5 mm, targeting high-performance networking, telecom, and military applications. QorIQ is a family of NXP communications processors built on the Power Architecture (PowerPC) instruction set, designed for embedded networking workloads. Within that taxonomy, the P4 series sits at the high end of the original QorIQ lineup, above the P1/P2/P3 tiers and alongside the P5 family. The P4080 was the flagship P4 device when introduced and serves as the foundation for the P4040, P4081, P3, P2, and P1 derivative families. P4080 variants are packaged in a large 1295-ball FCBGA (flip-chip BGA) with a 0.8 mm ball pitch to support the eight-core complex, multi-rail SerDes, and high-bandwidth DDR2/DDR3 memory interface. Key features include eight 32-bit e500mc cores with hardware multithreading, integrated SEC 4.0 cryptographic accelerator for wire-rate IPsec and SSL, dual DDR2/DDR3 controllers with ECC, four 10 Gigabit Ethernet ports plus eight 1 Gigabit Ethernet ports, two PCIe Gen2 controllers, two Serial RapidIO 2.1 interfaces, and an integrated security engine. Operating temperature range is 0 °C to 105 °C (commercial extended). Device speed grade is 1500 MHz core / 1300 MHz platform with a 1.0 V core / 1.3 V supply configuration (denoted by the NS suffix per NXP part numbering). The architecture pairs dual e500mc cores per cluster with a CoreNet coherency switch, delivering non-blocking on-chip bandwidth for packet processing, deep-packet inspection, and control-plane workloads. A dedicated SEC 4.0 block accelerates bulk encryption, freeing CPU cycles for routing, switching, and QoS policy enforcement. Typical applications include multi-service routers and switches, LTE/WCDMA base-station baseband, network-attached storage controllers, defense and aerospace secure routers, and industrial control-plane gateways. The combination of eight cores, integrated cryptography, and multi-protocol SerDes makes P4080 particularly well-suited to secure, line-rate aggregation platforms. When designing with P4080, ensure the PCB accommodates a 37.5 x 37.5 mm FCBGA with controlled-impedance routing for the multi-lane SerDes. Provide sufficient bulk capacitance for the 1.0 V core rail (typical core current can exceed 30 A under load) and follow NXP thermal management guidelines for the FCBGA. This page synthesizes distributor pricing, drop-in P4080 family alternatives, and PCB/application notes not collected in a single block on the NXP product page.

견적 요청 문의하기
P4080NSN1MMB - QorIQ P4080 8-Core 1.5GHz PowerPC MPU | NXP
P4080NSN1MMB

P4080NSN1MMB - QorIQ P4080 8-Core 1.5GHz PowerPC MPU | NXP

The NXP (formerly Freescale) P4080NSN1MMB is a PowerPC e500mc-based 32-bit microprocessor from the QorIQ P4 series, integrating 8 cores running at up to 1.5 GHz in a 1295-pin FCPBGA package measuring 37.5 x 37.5 mm. It is fabricated on a 45 nm process and targets high-throughput, multi-core embedded computing workloads such as networking line cards, base-station DSP offload, multi-service gateways, and industrial control. The MPN suffix decoder (NSN1MM / NSN7MMC variants indicate different speed, security, and temperature grades; refer to the QorIQ P4080 product family datasheet for exact ordering information). QorIQ communications processors are a family of high-performance Power Architecture SoCs designed by NXP/Freescale for wired and wireless infrastructure equipment. They integrate CPU cores, memory controllers, hardware accelerators (SEC, PME, DPAA for packet processing), and multiple SerDes lanes, replacing traditional discrete CPU + ASIC designs with a unified SoC platform. Within the taxonomy, P4080 sits between single-core PowerQUICC predecessors and the higher-end P5020/P5040 family, occupying the multi-core mid-range of the QorIQ P4 series. Key differentiating features include 8 x e500mc cores with hardware hypervisor support, three high-speed memory controllers supporting DDR3 with ECC, integrated 10 Gigabit Ethernet MACs plus multiple Gigabit Ethernet controllers, Data Path Acceleration Architecture (DPAA) for hardware-assisted packet parsing and classification, and a Trust Architecture security engine for encryption offload. Power is supplied across multiple rails at 1.5 V, 1.8 V, 2.5 V, and 3.3 V, typical of high-integration SoCs with mixed-voltage I/O. The architectural sweet spot is parallel control-plane and data-plane processing on a single device: while individual cores run at 1.5 GHz, the real throughput comes from running 8 threads simultaneously, with DPAA moving packets between cores and interfaces without CPU intervention. The e500mc core supports the Power Architecture Book E instruction set with hypervisor-mode virtualization extensions, enabling partitioned software stacks for service-provider routers or industrial safety systems. Typical applications include enterprise and carrier Ethernet routers, LTE / 4G base-station channel cards, multi-service access nodes (MSAN), secure industrial gateways, network-attached storage controllers, and defense / aerospace signal-processing front-ends. Designers also deploy P4080 in software-defined networking (SDN) switches where its packet offload accelerates OpenFlow classification. The wide I/O fan-out (PCIe, SRIO, Ethernet) and large L2 cache footprint make it a versatile engineering point in the broader NXP QorIQ family. When designing with this device, allocate the large 37.5 x 37.5 mm BGA footprint with a minimum 8-layer PCB stack-up; thermal management must account for 25-30 W typical SoC power. Use the CodeWarrior / Linux BSP and u-boot from NXP for early bring-up, and verify DDR3 topology against the P4080 QorIQ hardware specification. Cross-reference the P4080 product family datasheet (referenced below) for the exact pin map and SerDes lane assignments before committing layout. This page synthesizes distributor pricing, drop-in QorIQ family alternatives, and practical hardware design notes not found in any single manufacturer document.

견적 요청 문의하기
P4080NSN1NNB - QorIQ P4 8-Core 1.2GHz PowerPC MPU | NXP
P4080NSN1NNB

P4080NSN1NNB - QorIQ P4 8-Core 1.2GHz PowerPC MPU | NXP

The NXP P4080NSN1NNB is a QorIQ P4 series PowerPC e500mc microprocessor (MPU) integrating 8 cores at 1.2 GHz in a 1295-pin FCPBGA (37.5x37.5 mm) package, manufactured on a 45 nm process. It targets high-performance networking, telecom, and industrial control applications where multi-core compute density and rich I/O are required. A microprocessor (MPU) is an integrated circuit that integrates one or more processor cores, caches, memory controllers, and peripheral interfaces onto a single die. The QorIQ P4080 belongs to the Power Architecture (PowerPC e500mc) family, sitting in the taxonomy of embedded communication processors that combine general-purpose compute with hardware acceleration for packet processing, security, and datapath offload. Key features include 8 e500mc cores with hardware multithreading support, dual DDR2/DDR3 memory controllers with ECC, integrated SerDes lanes supporting SGMII/XAUI/PCIe, hardware cryptography accelerators, and a fabric interconnect. The P4080 supports 1.5V/1.8V/2.5V/3.3V mixed-voltage I/O and operates from a 0.95 V core supply. Architecturally, the P4080 uses a hierarchical cache topology with private L1 per core and a shared L2, plus a CoreNet coherency fabric linking cores, memory controllers, and the platform subsystem. This delivers strong multi-thread performance while maintaining deterministic behavior for control-plane tasks. Typical applications include multi-service routers, LTE baseband processing, network-attached storage controllers, secure VPN gateways, and industrial PLC controllers. The wide SerDes lane count makes the P4080 suitable for systems that aggregate multiple 1G/10G Ethernet ports without external PHY complexity. When designing with this device, ensure the 37.5x37.5 mm FCPBGA land pattern uses microvia PCB stackup with matched-length SerDes routing. Power sequencing must follow the 0.95 V core / 1.5 V DDR / I/O voltage order in the reference manual to avoid latch-up. This page synthesizes distributor pricing, drop-in same-family QorIQ alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
P4080NSN1PNB - QorIQ P4080 8-Core 1.5GHz e500mc MPU | NXP Freescale
P4080NSN1PNB

P4080NSN1PNB - QorIQ P4080 8-Core 1.5GHz e500mc MPU | NXP Freescale

The NXP (formerly Freescale) P4080NSN1PNB is a multi-core PowerPC microprocessor in the QorIQ P4 family featuring eight e500mc cores running at up to 1.5 GHz, manufactured on a 45 nm process and housed in a 1295-pin FCBGA (37.5 x 37.5 mm) package with 1.5V/1.8V/2.5V/3.3V supply rails. It is the flagship product of the original QorIQ generation and the architecture foundation from which the P5, P3, P2 and P1 families were derived. The device also spawned the slimmed-down P4040 (4-core) and security-enhanced P4081 variants. What is a QorIQ communications processor? A QorIQ microprocessor is a high-performance Power-Architecture-based system-on-chip designed by NXP (originally Freescale) for networking, telecom, and aerospace infrastructure. It sits in the hierarchy MPU -> microprocessor -> communications processor -> SoC, combining CPU cores, cache hierarchy, networking accelerators, and serial interfaces on a single die. Compared to a general-purpose MPU, a QorIQ P4080 integrates packet-processing engines, multiple 10 Gigabit Ethernet MACs, and DPAA-style queue management, eliminating the need for an external traffic manager. Key features of the P4080NSN1PNB include a 32-bit Power Architecture e500mc core complex with eight superscalar, out-of-order threads, hardware virtualization (QorIQ trust architecture), dual 32 KB I/D L1 caches per core, a shared 2 MB L2, and Trust 1.1 secure-boot support. The device also exposes four 10-Gigabit Ethernet controllers plus eight 1-Gigabit controllers, three PCIe Gen2 controllers, four Serial RapidIO Gen2 ports, and two SATA 2.0 controllers, making it a true platform-level SoC for embedded data-plane workloads. Typical applications include enterprise routers, multi-service edge platforms, LTE/WCDMA baseband compute, network-attached storage controllers, aerospace flight-control and mission-computing systems, and high-density line cards for chassis-based switches. Multiple temperature grades are available; the NSN1 letter code denotes a specific speed and commercial-grade bin supplied in tray packaging. When designing with this part, board designers must allocate a 37.5 x 37.5 mm land pattern, provide at least five independent voltage rails, follow NXP's stack-up and DDR3 routing guidelines, and budget 6-12 W typical CPU-only dissipation with the thermal enhanced lid variant. The package pin count (1295) and BGA pitch make this part appropriate for high-density, professionally-laid PCBs rather than hobbyist prototyping. This page synthesises distributor inventory, drop-in same-family alternatives, and thermal/pin-compatibility design notes that go beyond what the manufacturer datasheet alone provides.

견적 요청 문의하기
P4080NSN7PNC - QorIQ 8-Core 1.5GHz SoC FCBGA-1295 | NXP
P4080NSN7PNC

P4080NSN7PNC - QorIQ 8-Core 1.5GHz SoC FCBGA-1295 | NXP

The NXP P4080NSN7PNC is a QorIQ P4080 multi-core communications processor with eight Power Architecture e500mc cores running at up to 1.5 GHz, packaged in a 1295-ball FCBGA (37.5 x 37.5 mm). Built on a 45 nm process, it integrates DDR2/DDR3 memory controllers with ECC, multiple 1 GbE and 10 GbE interfaces, PCIe, Serial RapidIO (SRIO), and security acceleration for high-performance networking workloads. A QorIQ communications processor is a system-on-chip (SoC) designed for embedded networking, telecom, and industrial control. It combines general-purpose CPU cores with hardware accelerators and high-speed serial interfaces in a single BGA package, occupying the role of a single-board computer-on-chip within a larger line card or control plane design. The P4080 family established the QorIQ P-series hierarchy from which the P5, P3, P2, and P1 derivatives were subsequently derived. Key features include eight e500mc cores with hardware multithreading, a 32 KB instruction and 32 KB data L1 cache per core, a 2 MB shared L2 cache, a triple-redundant CoreNet fabric, DDR2/3 controllers with ECC supporting up to 4 GB of addressable memory, integrated security engines, and four SGMII 1 GbE plus two XAUI/XFI 10 GbE MACs. The 1295-pin FCBGA package provides the bandwidth required to route the multiple SerDes lanes and DDR channels without external switching. Architecturally, the P4080NSN7PNC uses CoreNet coherency fabric to keep L2 caches coherent across all eight cores, allowing symmetric multiprocessing under standard Linux distributions. Operating voltage rails are supplied at 1.5 V, 1.8 V, 2.5 V, and 3.3 V; core frequency is 1.5 GHz at the N7 speed bin and 1.3 GHz at the lower bin. The -40 to 105 °C industrial junction range allows deployment in unconditioned outdoor enclosures and base-station chassis. Typical applications include high-end routers and switches, LTE base-station baseband processing, multi-service edge gateways, industrial control planes, and defense/aerospace communications. The combination of eight cores and 10 GbE MACs also makes the part useful as a control-plane processor in modular line cards alongside dedicated network ASICs. When designing with this device, allocate a minimum 6-layer PCB with continuous ground planes beneath the BGA and matched-length routing for DDR3, SRIO, and 10 GbE lanes. The package requires a high-layer-count substrate and a controlled-impedance stack-up; thermal management should use a heat spreader or heatsink rated for at least 15 W typical dissipation. This page synthesizes distributor pricing, lifecycle status, and application context not found in the manufacturer datasheet, plus drop-in alternative guidance for P4080 family variants.

견적 요청 문의하기
P4080NXE7PNAC - QorIQ 8-Core 1.5GHz SoC MPU | NXP
P4080NXE7PNAC

P4080NXE7PNAC - QorIQ 8-Core 1.5GHz SoC MPU | NXP

The NXP P4080NXE7PNAC is a QorIQ P4080 32-bit Power Architecture system-on-chip (SoC) microprocessor integrating eight e500mc cores running at up to 1.5GHz, housed in a 1295-pin FCBGA (37.5x37.5 mm) package. As the flagship of the QorIQ P-series at launch, the P4080 combines eight high-performance cores with a hierarchical CoreNet interconnect fabric and a 2 MB shared L3 platform cache, delivering multi-core throughput for networking, telecom, and embedded datacenter workloads while operating from a -40C to +105C industrial temperature range. A microprocessor (MPU) is a single-chip CPU that integrates the central processing unit, memory controllers, and peripheral interfaces on one die. The QorIQ P4 family extends the classic PowerPC e500mc architecture into a heterogeneous multi-core platform with hardware virtualization (user/supervisor/hypervisor privilege levels), secure boot, ECC-protected DDR2/3 memory, and high-speed serial interfaces including 1/10GbE, PCIe, and Serial RapidIO. These functions collectively position the P4080 in the broader taxonomy: microprocessor -> 32-bit embedded processor -> multi-core SoC -> networking/datacom SoC. Key features of the P4080NXE7PNAC include eight e500mc cores with 32 KB instruction and 32 KB data L1 caches per core plus a private 128 KB L2, 2 MB of shared L3 CoreNet platform cache, DDR2/3 memory controller with ECC supporting up to 1333 MT/s, two 10 Gigabit Ethernet MACs, eight 1 Gigabit Ethernet MACs, three PCIe Gen2 controllers, two Serial RapidIO interfaces, hardware-accelerated SEC for cryptography, and four TDM interfaces. The 45 nm CMOS process and 1.5 GHz core frequency deliver up to 38.4 GMIPS aggregate throughput. Architecturally, the P4080 employs a coherent CoreNet fabric that lets all eight cores share the platform cache and peripherals with low-latency snoop support. The triple-level instruction translation (user/supervisor/hypervisor) enables KVM-style full virtualization for running multiple OS instances. The integrated SEC (Security Engine) provides hardware-accelerated AES, 3DES, SHA, RSA, and ECC, offloading crypto from the cores. Typical applications include multi-service edge routers, enterprise and SMB switches, network security appliances (firewall/IPSec), LTE/WiMAX baseband processing, control-plane and data-plane cards on ATCA/AMC platforms, and industrial control with deterministic Ethernet. The wide operating temperature also makes it suitable for ruggedized and military-grade networking equipment. When designing with this part, allocate a minimum 8-layer PCB stack-up with continuous GND planes under the BGA to control impedance for 1/10GbE and PCIe SERDES. Decouple each core voltage domain with bulk plus high-frequency MLCCs placed within 5 mm of the balls, and follow NXP's AN4105 layout guide for the FCBGA escape. The R3 silicon revision noted in the datasheet reflects NXP's bug-fix revision; verify firmware/RTL compatibility before swapping R3 for R2 silicon. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
P4081NSE7KKC - QorIQ P4 8-Core 1.2GHz PowerPC SoC | NXP
P4081NSE7KKC

P4081NSE7KKC - QorIQ P4 8-Core 1.2GHz PowerPC SoC | NXP

The NXP P4081NSE7KKC is a QorIQ P4 family multi-core communications microprocessor integrating eight PowerPC e500mc cores running at up to 1.2 GHz, packaged in a 1295-ball FCBGA (37.5x37.5 mm). It is a 32-bit SoC targeting high-performance networking, wireless infrastructure, and data-plane workloads that require parallel packet processing. A multi-core communications processor (often called an application processor or SoC) is a single silicon device that combines several CPU cores, coherent interconnect fabric, memory controllers, and high-speed serial I/O (SerDes) interfaces. Within the system hierarchy it sits above simple microcontrollers and below dedicated ASIC/FPGA accelerators, bridging general-purpose control and line-rate packet handling in a single chip. Key features include eight e500mc cores with hardware-assisted multithreading support, dual DDR2/DDR3 memory controllers with ECC, integrated security engine (SEC 4.0) for IPSec/SSL offload, two 10 Gigabit Ethernet MACs plus eight 1 Gigabit Ethernet MACs, multiple PCIe and Serial RapidIO (SRIO) controllers, and a coherency fabric that scales coherently across all eight cores. The variant suffix "SE7KKC" denotes the security-enabled, 1.2 GHz speed grade. The architecture pairs the e500mc cores with a CoreNet coherency fabric, allowing shared-memory multiprocessing with deterministic memory access. Hardware queues, buffer managers, and pattern-match accelerators offload packet classification, freeing the cores for control-plane and exception handling. This balanced design keeps power consumption in a range that can be cooled with a heatsink, unlike higher-frequency parts in the family. Typical applications include multi-service routers, LTE base-station baseband, enterprise switches, network-attached storage controllers, and industrial control planes with deterministic Ethernet. It also serves as the host processor in aerospace and defense packet-processing subsystems requiring long-life silicon and ECC-protected memory. When designing with the P4081NSE7KKC, follow NXP's reference PCB layout for the FCBGA to maintain signal integrity on SerDes lanes. Provide matched impedance for DDR2/DDR3 traces and ensure thermal design accounts for worst-case power across all cores active. The 1295-ball FCBGA requires 12-layer or thicker stack-up. This page synthesizes distributor pricing, lifecycle status, same-package alternatives and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
P4081NSN7KKC - QorIQ P4 8-Core 1.2GHz PowerPC MPU | NXP
P4081NSN7KKC

P4081NSN7KKC - QorIQ P4 8-Core 1.2GHz PowerPC MPU | NXP

The NXP (formerly Freescale) P4081NSN7KKC is a QorIQ P4-series communications microprocessor built on the PowerPC e500mc core, delivering eight 32-bit cores running at up to 1.2 GHz in a 1295-ball FCBGA (37.5 x 37.5 mm) package. The 'NSN7' designator marks it as the 1.0 GHz core / 1000 MHz speed grade variant (no security, industrial qualification), while 'KKC' identifies the FCBGA package and reel packaging option. This part belongs to the QorIQ P4 communications processor family, which sits in the broader taxonomy of embedded microprocessors -> multicore MPU -> communications processor -> system-on-chip. QorIQ P4 parts target high-throughput networking, industrial control, and aerospace/defense workloads where deterministic multicore compute is required. Key features include eight PowerPC e500mc cores with 32-bit datapath, hardware virtualization and DPAA (Data Path Acceleration Architecture) for packet processing, integrated DDR2/DDR3 memory controllers with ECC, eight 1 Gbps Ethernet MACs plus a single 10 Gbps interface, SerDes lanes, and PCI Express Gen2 controllers. The device also integrates secure-boot and Trust Architecture support when configured with the security fuse option (a different ordering code suffix). Typical applications include multiservice routers, LTE/eNodeB baseband cards, industrial firewalls, defense and aerospace signal-processing subsystems, and high-end network-attached storage controllers. The eight-core layout also makes it attractive for parallelized control-plane workloads and software-defined networking (SDN) data planes. When designing with this device, ensure your PCB accommodates the 37.5 x 37.5 mm FCBGA land pattern with matched-impedance SerDes routing, and provide a thermal solution sized for the maximum TDP at sustained core load. Use NXP's CodeWarrior or GNU toolchain with the appropriate e500mc SYSV ABI for software bring-up.

견적 요청 문의하기
P4081NSN7MMC - 8-Core QorIQ P4 1.2GHz SoC | NXP Semiconductors
P4081NSN7MMC

P4081NSN7MMC - 8-Core QorIQ P4 1.2GHz SoC | NXP Semiconductors

The NXP Semiconductors P4081NSN7MMC is an 8-core 32-bit Power Architecture System-on-Chip (SoC) from the QorIQ P4 family, operating at up to 1.2 GHz per core, integrated in a 1295-ball FCBGA package measuring 37.5 x 37.5 mm. It implements the PowerPC e500mc core, supports DDR2/DDR3 memory with ECC, and integrates packet-oriented I/O including 1/10 GbE, PCIe and Serial RapidIO (SRIO). The device is qualified for the 0°C to 105°C commercial operating range. A QorIQ communications SoC is a high-performance multi-core processor designed for networking, telecom, and embedded data-plane workloads where deterministic throughput, hardware acceleration, and rich I/O are equally important to raw CPU frequency. Within the power-management taxonomy the P4081 sits at the intersection of MPU (microprocessor unit), multicore SoC, and communications platform. The QorIQ family as a whole replaced the legacy PowerQUICC line and is positioned between general-purpose application processors and dedicated network ASICs. Key features of the P4081 include eight e500mc cores with hardware hypervisor and virtualization support, dedicated L2 cache, a 64-bit DDR2/3 memory controller with ECC, multiple GbE and 10 Gigabit Ethernet MACs, PCIe Gen1/Gen2, and Serial RapidIO 1.3 interfaces. The chip is fabricated in a 45 nm CMOS process and requires 1.5 V, 1.8 V, 2.5 V and 3.3 V power rails. The combination of dual-cluster quad-core topology and a hardware-accelerated datapath makes it well suited to control-plane and data-plane workloads running concurrently. Architecturally the P4081 places cores, L2 cache, the memory controller and the network/IO fabric on a single die; the Corenet coherent fabric allows each core to share memory and accelerator resources without software coherence management overhead. This tightly integrated SoC design removes the chip-to-chip latency of multi-chip designs used in earlier PowerPC platforms. Typical applications of the P4081NSN7MMC include enterprise routers and switches, multi-service gateways, wireless baseband controllers, network security appliances, and industrial control or storage controllers that require both high compute density and rich packet-oriented IO. When designing with this device, allocate the largest copper plane to the 1.5 V and 1.8 V cores because the 45 nm process is sensitive to supply noise; a 12+ layer PCB with buried capacitance is recommended for layout, and the BGA requires a socket or direct solder attach. This page synthesizes distributor availability, supply-chain status, and pin-compatible QorIQ family variants not consolidated in the original NXP datasheet, giving you a one-stop reference for sourcing and replacement decisions.

견적 요청 문의하기
P5010NSE1TNB - QorIQ P5 2.0GHz 64-Bit PowerPC e5500 MPU | NXP
P5010NSE1TNB

P5010NSE1TNB - QorIQ P5 2.0GHz 64-Bit PowerPC e5500 MPU | NXP

The NXP P5010NSE1TNB is a PowerPC e5500 microprocessor in the QorIQ P5 family, integrating a single 64-bit e5500 core running at 2.0 GHz in a 1295-ball FCPBGA (37.5x37.5 mm) package. Designed for high-performance embedded applications, it combines out-of-order execution, hardware virtualization support, and an integrated memory controller with high-bandwidth I/O peripherals on a single SoC. The "NSE1" speed-grade designation indicates the 1800/1333 MHz core/DDR frequency bin, and "TNB" refers to the standard-temperature FCPBGA package variant. A microprocessor (MPU) is an integrated circuit that contains the central processing unit of a computer system, executing program instructions and managing data flow. The PowerPC e5500 architecture is a 64-bit, superscalar, out-of-order implementation originally derived from Freescale's e500 lineage used across NXP QorIQ networking and industrial platforms. This product family sits within the broader hierarchy of microprocessor -> embedded processor -> SoC (System-on-Chip) -> semiconductor, optimized for network packet processing, secure routing, and industrial control workloads. Key features of the P5010NSE1TNB include a single e5500 core with double-precision floating point, hardware virtualization for partitioned OS environments, an integrated DDR3/DDR3L memory controller, multiple Gigabit Ethernet interfaces, PCI Express Gen 2 controllers, and integrated security engines. The wide I/O fabric reduces external component count, allowing compact board designs for space-constrained routers and embedded systems. The P5010NSE1TNB leverages NXP's e5500 core architecture, which combines dual-issue superscalar dispatch with out-of-order completion and AltiVec-compatible SIMD media processing. This micro-architectural depth delivers significantly higher instructions-per-clock than in-order alternatives, while integrated L2 cache and coherency logic keep memory subsystem latency low. The platform's Trusted Execution and Secure Boot features are designed for networking equipment where hardware root-of-trust is mandatory. This MPU is commonly deployed in industrial routers and secure gateways, factory automation controllers, defense and aerospace embedded systems, networked storage controllers, and single-board computing platforms. The 2.0 GHz operating point balances throughput and thermal envelope for fanless or low-airflow industrial chassis. Standard temperature grade makes it suited for commercial and industrial settings, while extended-temperature variants may be required for fully ruggedized deployments. Design considerations include proper thermal management via the exposed-die FCPBGA package, signal-integrity routing for DDR3 memory traces, and decoupling strategy for the multiple supply rails (core, I/O, DDR PHY, and PLL). Engineers should review the hardware specifications for clocking, reset, and configuration of the on-chip SerDes lanes. This page synthesizes distributor pricing, parameter data, and cross-reference information for the P5010NSE1TNB beyond what is offered in the manufacturer datasheet summary, providing engineer-oriented selection guidance.

견적 요청 문의하기
P5010NSE1TNB557 - QorIQ P5 2GHz e5500 MPU | 1295-FCPBGA
P5010NSE1TNB557

P5010NSE1TNB557 - QorIQ P5 2GHz e5500 MPU | 1295-FCPBGA

The NXP P5010NSE1TNB557 is a QorIQ P5 series PowerPC e5500 microprocessor integrating a single 64-bit core running up to 2.0 GHz, packaged in a 1295-ball FCPBGA (37.5 x 37.5 mm). It is built on a high-performance CMOS process and targets networking, telecom, and embedded compute platforms requiring deterministic throughput with a familiar Power Architecture ISA. The device ships in a standard temperature grade and is sold by Rochester Electronics as factory-traceable stock of the original Freescale/NXP silicon. A microprocessor (MPU) is the central execution unit of a computing system, fetching and decoding instructions, performing arithmetic and logic operations, and orchestrating data movement between memory and peripherals. The QorIQ P5 family sits in the broader taxonomy of PowerPC e5500 cores -> embedded microprocessors -> microcontrollers and MPUs -> integrated circuits -> semiconductors, and is widely used in wired/wireless infrastructure where per-watt performance and rich I/O matter. Key differentiating features of the P5010 include a 64-bit data path, hardware virtualization support, integrated security acceleration (SEC), and the high-bandwidth CoreNet fabric that links the core to on-chip accelerators. The 1295-ball FCPBGA package provides the dense signaling required to expose multiple 10 GbE-class SerDes lanes, DDR3/3L memory controllers, and PCI Express Gen 2 interfaces simultaneously, enabling single-chip system designs. Architecturally, the e5500 core extends the classic Power Architecture with out-of-order execution hints, larger caches, and symmetric multiprocessing support, while the platform layer adds a Data Path Acceleration Architecture (DPAA) for packet parsing, queueing, and crypto offload. This combination makes the P5010 well suited for line-card controllers, mid-range routers, and industrial gateways where deterministic latency and protocol processing coexist. Typical applications include enterprise and industrial networking equipment, telecom base stations and edge compute nodes, secure industrial control systems, single-board compute modules for defense and aerospace, and protocol-aware gateway designs. The wide I/O complement also supports storage controllers and TSN-enabled industrial Ethernet endpoints. When designing with this device, ensure the PCB can dissipate the thermal envelope of a 2.0 GHz e5500 core and follow NXP's reference schematics for DDR3L layout, SerDes routing, and core voltage rail decoupling. Firmware must initialize the RCW (Reset Configuration Word) and SERDES reference clocks before boot, and stock firmware for the P5 family is available from NXP and Rochester Electronics as factory-original parts. This page synthesizes distributor pricing, drop-in same-package alternatives, and design references that complement the manufacturer datasheet and reference manual.

견적 요청 문의하기
P5010NSE7MMB - QorIQ P5 2.0GHz SoC | NXP Semiconductors
P5010NSE7MMB

P5010NSE7MMB - QorIQ P5 2.0GHz SoC | NXP Semiconductors

The NXP Semiconductors P5010NSE7MMB is a QorIQ P5-series communications processor built on 64-bit Power Architecture technology (e5500 core), integrating a single CPU core operating up to 2.0 GHz, hardware-accelerated security (SEC), packet processing, and high-speed serial interfaces (PCIe, Serial RapidIO, Gigabit Ethernet). It is housed in a 1295-ball FC-PBGA (FCBGA) package measuring 37.5 mm x 37.5 mm and is specified for the 0 to 105C ambient temperature range. The device is fabricated in CMOS technology and targets enterprise and service-provider networking equipment such as routers, switches, and security appliances. A QorIQ communications processor is a system-on-chip (SoC) designed for embedded networking and industrial control workloads. The QorIQ family is built on Power Architecture technology and spans entry-level single-core parts up to multi-core data-plane processors; the P5 series sits in the mid-tier with integrated datapath acceleration. Within the broader taxonomy, P5010 belongs to: communications processor -> embedded processor -> microprocessor -> integrated circuit -> semiconductor. This hierarchical context is what distinguishes an SoC from a generic microcontroller and explains its role in wired/wireless infrastructure. Key features of the P5010NSE7MMB include a 64-bit e5500 Power Architecture core with integrated L1/L2 caches, dedicated hardware engines for pattern matching, queue management, encryption (SEC engine for IPsec/SSL), and RapidIO, plus support for DDR3 memory with ECC. The integrated datapath acceleration block offloads packet classification and QoS functions from the CPU, enabling wire-speed throughput on multi-Gigabit interfaces. According to the NXP QorIQ P5010/P5020 product brief, the e5500 core delivers higher instructions-per-clock than previous-generation e500 cores while retaining software compatibility. The architecture pairs the e5500 core with a high-bandwidth coherent interconnect that feeds multiple integrated controllers, including SerDes lanes used to configure PCIe, Serial RapidIO (SRIO), and 1G/2.5G Ethernet PHYs. The SoC's nominal core voltage is 1.00 V (range 0.95 V to 1.05 V) with separate rails for the DDR3 I/O and SerDes analog blocks; careful power-rail sequencing is required during board bring-up. The 1295-ball FC-PBGA package uses flip-chip land pads on the bottom surface and demands a matched-impedance multilayer PCB with controlled-via stitching for the core's high-speed signals. Typical applications include enterprise routers, multiservice gateways, line cards for chassis-based switches, network-attached storage controllers, industrial control and automation hosts, and secure communication appliances that benefit from on-chip SEC acceleration. The P5010NSE7MMB's 0 to 105C temperature range allows deployment in thermally constrained networking shelves where ambient cooling is provided by forced airflow rather than heatsinks. When designing with this part, pay close attention to DDR3 trace length matching (within the limits stated in the NXP hardware design guide), SerDes reference-clock jitter, and the in-package thermal dissipation of the 37.5 mm BGA - a multi-layer PCB with inner ground/power planes is essential for the high-current transient response demanded by the core and SerDes blocks. This page synthesizes distributor pricing, verified specifications, drop-in alternatives within the QorIQ family, and design notes not found in the manufacturer datasheet, giving embedded designers a single reference for evaluating the P5010NSE7MMB against current alternatives.

견적 요청 문의하기
P5010NSE7TNB557-FR - QorIQ P5 1.8GHz PowerPC e5500 MPU | NXP
P5010NSE7TNB557-FR

P5010NSE7TNB557-FR - QorIQ P5 1.8GHz PowerPC e5500 MPU | NXP

The NXP P5010NSE7TNB557-FR is a PowerPC e5500 microprocessor IC in the QorIQ P5 communications processor family, integrating 1 core operating up to 1.8 GHz on a 64-bit architecture, housed in a 1295-ball FCPBGA (37.5x37.5 mm) package. Designed for high-performance embedded networking and communications workloads, it combines a high-frequency e5500 core with integrated platform peripherals used in routers, switches, and security appliances. A QorIQ communications processor is a system-on-chip (SoC) that combines one or more Power Architecture CPU cores with networking-specific accelerators, security engines, and high-speed I/O, sitting between general-purpose CPUs and dedicated ASICs in the broader hierarchy of embedded processors. The P5 series specifically targets mid-range routing, switching, and unified threat management (UTM) applications where single-thread performance and high integration reduce bill-of-materials cost and board area. Key features include a 64-bit PowerPC e5500 core running up to 1.8 GHz, integrated high-speed SerDes lanes for 10 GbE and PCI Express connectivity, hardware-accelerated security engines, and the FCBGA-1295 (37.5x37.5) package with high-density interconnect for the multi-lane SerDes interfaces. The device is part of NXP's communications processor portfolio originally developed by Freescale, with the -FR suffix indicating a specific tape-and-reel packaging variant. From an architectural standpoint, the e5500 core supports hypervisor-aware virtualization, hardware page table translation, and out-of-order execution for single-thread performance critical to control-plane packet processing. The integrated SerDes and queue manager reduce external PHY count and simplify traffic management, while the high-bandwidth memory controller supports DDR3/DDR3L with ECC for high-reliability networking systems. Typical applications include enterprise routers, industrial gateways, network-attached storage (NAS) controllers, military/aerospace secure communications, and single-board computers for edge networking. The combination of single-core simplicity and integrated peripherals makes it well suited to platforms where deterministic performance matters more than raw core count. When designing with this device, plan thermal dissipation carefully: at 1.8 GHz under heavy load the FCBGA-1295 dissipates substantial power and requires a heatsink or thermal interface material rated for the expected ambient temperature. PCB layout must follow NXP's high-speed design guide for the SerDes lanes to meet signal-integrity margins. This page synthesizes distributor pricing, package details, and practical application notes for the P5010NSE7TNB557-FR beyond what the manufacturer product page alone provides.

견적 요청 문의하기
P5010NSN1MMB - QorIQ P5 e5500 2.0GHz 64-bit MPU | NXP Semiconductors
P5010NSN1MMB

P5010NSN1MMB - QorIQ P5 e5500 2.0GHz 64-bit MPU | NXP Semiconductors

The NXP Semiconductors P5010NSN1MMB is a PowerPC e5500-based microprocessor IC from the QorIQ P5 communications platform family, integrating a single 64-bit core running at 2.0 GHz in a 1295-ball flip-chip plastic BGA (FCPBGA) package measuring 37.5 mm × 37.5 mm. The part belongs to NXP's high-end embedded communications processor family, serving as the system-on-chip engine for wired and wireless infrastructure, industrial control, and defense/aerospace compute applications. A microprocessor (MPU) is an integrated circuit that contains one or more central processing units implemented as a single silicon die, designed to fetch, decode, and execute general-purpose instructions while orchestrating peripherals over bus fabrics and memory controllers. MPUs occupy the top of the embedded compute hierarchy (microprocessor -> MPU/SoC -> embedded processor -> communication processor), and QorIQ P5 devices in particular target enterprise and carrier-grade workloads where 64-bit address-space performance, hardware packet acceleration, and extended operating-temperature envelopes matter far more than instruction-level power efficiency. Key differentiating characteristics of the P5010NSN1MMB include the e5500 64-bit dual-issue superscalar Power architecture core, integrated high-bandwidth memory and I/O controllers, on-chip SerDes lanes for backplane interfaces, and 2.0 GHz maximum operating frequency. The 1295-ball FCPBGA exposes the full DDR controller, multiple Ethernet MACs, PCIe lanes, and other high-speed serial interfaces needed to drop into a top-of-rack switch, radio-network controller, or secure industrial gateway without external protocol bridges. Application fit includes Layer 2/3 enterprise switches, router control planes, secure VPN/IPsec gateways, industrial automation controllers, and defense embedded compute modules. When designing with this part, special attention must be paid to PCB stack-up for the FCPBGA, thermal dissipation, and power-rail sequencing - the e5500 core will not tolerate spec-violating supply ramps. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical sourcing notes not collected in one place in the NXP product brief.

견적 요청 문의하기
P5010NSN1QMB - QorIQ P5010 SoC, 64-bit Power Arch, 2.0GHz, 1295-FCBGA | NXP
P5010NSN1QMB

P5010NSN1QMB - QorIQ P5010 SoC, 64-bit Power Arch, 2.0GHz, 1295-FCBGA | NXP

The NXP P5010NSN1QMB is a QorIQ single-core 64-bit Power Architecture system-on-chip (SoC) running at up to 2.0 GHz, housed in a 1295-pin FCBGA (37.5x37.5 mm) package. The device supports DDR3 memory with hardware ECC, integrated PCI Express Gen 2 controllers, dual Gigabit Ethernet, Serial RapidIO (SRIO), and a hardware acceleration engine for data-path offload. The part is qualified for 0 to 105C standard temperature operation. A QorIQ communications processor is a multi-core Power Architecture SoC family from NXP designed for networking, wireless base-station, and embedded infrastructure applications. QorIQ P-series parts sit in the system hierarchy as application processors -> communications processors -> SoC -> NXP QorIQ family, integrating CPU cores, memory controllers, high-speed SerDes, packet-processing accelerators, and peripheral IP into a single chip to reduce board area and BOM. Key features include one e5500 core built on Power Architecture technology, 32 KB I-cache and 32 KB D-cache per core, a shared 1 MB L2 frontside cache, the DPAA (Data Path Acceleration Architecture) engine, on-chip SEC crypto engine, and multiple high-speed SerDes lanes configurable as PCIe, SRIO, or Aurora. The 1295-FCBGA package exposes the full complement of SerDes lanes and external memory interfaces required for high-end networking line cards. The P5010 is architected around a coherent SMP fabric connecting the e5500 core to memory and I/O controllers. The e5500 core is dual-issue, out-of-order, and supports hardware virtualization, hypervisor extensions, and AltiVec SIMD-style DSP operations. Integrated DPAA provides packet parsing, queue management, and buffer management without consuming CPU cycles, freeing the core for control-plane and exception processing. Typical applications include enterprise routing and switching line cards, wireless baseband processing (3G/4G small-cell), network-attached storage controllers, industrial embedded control with deterministic networking, and secure gateway appliances. The standard temperature grade (0 to 105C) targets commercial and industrial networking equipment rather than fully automotive environments. When designing with the P5010, route DDR3 traces with matched length and 50-ohm controlled impedance. Use a multi-layer PCB with dedicated ground planes adjacent to the high-speed SerDes lanes. Provide a heatsink or thermal interface to manage the 30W+ TDP at full 2.0 GHz operation, and follow NXP layout guidelines for the FCBGA substrate. This page synthesizes distributor stock, parametric proximity to others in the same package family, and practical design guidance not found in the manufacturer datasheet, giving engineers an actionable reference alongside the official document.

견적 요청 문의하기
P5010NSN1QMB557 - QorIQ P5 2GHz PowerPC e5500 SoC | NXP
P5010NSN1QMB557

P5010NSN1QMB557 - QorIQ P5 2GHz PowerPC e5500 SoC | NXP

The NXP P5010NSN1QMB557 is a QorIQ P5 communications processor built on the Power Architecture e5500 core, delivering 64-bit processing at 2.0 GHz with a single core in a 1295-ball FCBGA (37.5 x 37.5 mm) package. The SoC targets enterprise switching, routing, and unified threat management workloads where deterministic single-thread throughput and large L2 cache matter more than multi-core counts. A microprocessor (MPU) is an integrated circuit that contains a central processing unit, cache hierarchy, memory controllers, and a wide peripheral set on a single die. QorIQ P-series parts belong to the Power Architecture ecosystem - a family of 64-bit embedded processors that bridge networking, storage, and industrial control. Within the broader taxonomy they sit under microprocessors -> integrated circuits -> semiconductors, sitting alongside ARM-based application processors and x86 server CPUs but optimized for packet processing and deterministic latency. Key features of the P5010 include the e5500 64-bit core with hardware virtualization, dual DDR3 memory controllers with ECC, integrated security engines (SEC), multiple RGMII/SGMII/XAUI / PCIe / SATA / USB interfaces, and on-chip SRAM for low-latency lookups. The platform is qualified for 0C to 105C ambient operation, suiting NEBS-style telecom chassis as well as fan-cooled industrial gateways. The 1295-FCPBGA provides the ball pitch and pin-out needed for multilayer PCB designs with matched impedance SERDES routing. Architecturally, the e5500 pipeline executes up to two instructions per cycle and supports out-of-order completion with branch prediction, while the platform incorporates CorDA acceleration via hardware assists for queue management and cryptography. The SEC 4.0 block accelerates DES/3DES/AES/SHA and public-key algorithms, offloading security processing from the core for line-rate IPSec and SSL. Typical applications include enterprise routers and switches, network security appliances (firewall, UTM), wireless base station controllers, storage controllers, and industrial control with deterministic networking. The combination of single high-frequency core plus ECC memory and SEC acceleration makes it ideal for low-latency control plane code. Design consideration: the FCBGA requires 8-layer minimum PCB with matched-length SERDES lanes; thermal design must keep junction below 105C with top-side heatsink plus thermal vias. Ensure firmware (U-Boot, Linux BSP) is available for your derivative before committing to layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the bare NXP datasheet, giving procurement and engineering a single reference for the P5010NSN1QMB557.

견적 요청 문의하기
P5010NSN1TNB - QorIQ P5 64-Bit e5500 MPU 2.0GHz | NXP
P5010NSN1TNB

P5010NSN1TNB - QorIQ P5 64-Bit e5500 MPU 2.0GHz | NXP

The NXP P5010NSN1TNB is a QorIQ P5 series single-core 64-bit microprocessor built on the Power Architecture e5500 core, running at up to 2.0 GHz and housed in a 1295-ball FCBGA package measuring 37.5 x 37.5 mm. It integrates a high-performance 64-bit core with on-chip cache, DDR3/3L memory controller, multiple Gigabit Ethernet interfaces, PCI Express Gen 2, Serial RapidIO, and dedicated hardware accelerators for packet processing and security offload. What is an MPU (microprocessor unit)? An MPU is an integrated circuit that contains one or more processor cores along with integrated peripherals and memory controllers, forming a complete system-on-chip (SoC) for embedded compute. QorIQ P5 series parts sit in the NXP networking communications processor hierarchy: MPU -> communications processor -> multicore SoC -> embedded networking platform, bridging general-purpose compute and hardware-accelerated datapath silicon for routers, switches, and wireless base stations. Key features of the P5010NSN1TNB include 2.0 GHz e5500 core frequency, 64-bit Power Architecture instruction set, dual DDR3/3L memory controllers supporting up to 1866 MT/s, integrated 10 GbE and multiple GbE MACs, hardware pattern matching and encryption accelerators, and a 0 to 105 degrees C extended industrial temperature grade. The 1295-ball FCBGA provides the high-pin-count interconnect needed for wide parallel memory buses and multiple SERDES lanes. The P5010NSN1TNB uses the e5500 superscalar dual-issue Power Architecture core with out-of-order execution, integrated L1 caches, and a large shared L2 cache. The integrated datapath accelerators and SerDes lanes make it a single-chip solution for Layer 2-4 packet processing in carrier-grade networking equipment. Typical applications include enterprise and carrier Ethernet routers, wireless base station controllers, network security appliances, industrial control systems with deterministic compute, and high-end networked storage controllers. The integrated 10GbE and PCIe Gen2 provide direct attach to high-speed network and expansion silicon without external bridge chips. When designing with the P5010NSN1TNB, ensure the FCBGA 1295-ball PCB land pattern is matched exactly - this package is not socketed and uses lead-free reflow. Power sequencing rails must follow the NXP P5010 reference design sequence; consult the hardware design guide for SERDES reference clock and DDR3 fly-by topology. This page synthesizes distributor pricing, real cross-reference candidates for the QorIQ P5 family, and engineering design context drawn from NXP application notes, supplementing the manufacturer datasheet with practical selection and procurement guidance.

견적 요청 문의하기
P5010NSN1TNB557 - QorIQ P5 2GHz PowerPC e5500 MPU | NXP
P5010NSN1TNB557

P5010NSN1TNB557 - QorIQ P5 2GHz PowerPC e5500 MPU | NXP

The NXP P5010NSN1TNB557 is a QorIQ P5 communications processor integrating a single PowerPC e5500 64-bit core running at 2.0 GHz in a 1295-ball FCPBGA (37.5x37.5 mm) package. It is a member of the NXP QorIQ P5 family targeting networking, telecom, and embedded control workloads. A microprocessor (MPU) is an integrated circuit that contains the complete central processing unit of a computer on a single die, including the arithmetic logic unit, control unit, registers, cache, and memory management. MPUs belong to the semiconductor family and, in embedded systems, sit at the top of the compute hierarchy above microcontrollers (MCUs) and DSPs. The QorIQ P5 series is NXP's mid-range communications processor line, derived from the PowerPC e500/e5500 architecture and optimized for deterministic packet processing and low-power operation in routers, switches, and industrial gateways. Key features of the P5010NSN1TNB557 include the single e5500 core at 2.0 GHz, integrated L1/L2 caches, hardware acceleration engines for cryptography and pattern matching, dual 10 Gigabit Ethernet controllers, multiple lower-speed Ethernet MACs, DDR3/DDR3L memory controller with ECC support, PCI Express Gen 2 interfaces, and a SerDes-based interconnect fabric. The 1295-ball FCPBGA package exposes the full set of peripheral interfaces while providing thermal performance suitable for industrial temperature operation. Architecturally, the device leverages the e5500 superscalar core with out-of-order execution and a high-frequency system bus, paired with the Data Path Acceleration Architecture (DPAA) for packet parsing and queue management. This combination enables line-rate processing at 10 Gbps while keeping CPU load low, a critical advantage in software-defined networking and network function virtualization platforms. Typical applications include enterprise routers, Ethernet switches, network attached storage controllers, industrial control gateways, and aerospace/defense embedded compute modules. The QorIQ P5 platform enjoys long-term software support via NXP's Linux BSP and is widely deployed in long-life telecom and industrial programs. When designing with this device, plan thermal management around the 37.5x37.5 mm BGA, validate the SerDes reference clock topology against the manufacturer reference design, and confirm DDR3L signal integrity with the supplied IBIS models before committing to PCB layout. This page consolidates distributor pricing, drop-in package alternatives, and engineering guidance for the P5010NSN1TNB557 in a form that supplements the official NXP datasheet.

견적 요청 문의하기
P5010NSN7MMB557 - QorIQ P5 64-bit Power Arch SoC 1.2GHz | NXP
P5010NSN7MMB557

P5010NSN7MMB557 - QorIQ P5 64-bit Power Arch SoC 1.2GHz | NXP

The NXP (formerly Freescale) P5010NSN7MMB557 is a QorIQ P5010 64-bit Power Architecture system-on-chip (SoC) microprocessor with a single e5500 core running up to 1.2 GHz, housed in a 1295-ball FCPBGA (37.5 mm x 37.5 mm) package. The device integrates the high-performance e5500 PowerPC core, large caches, hardware virtualization primitives, and a rich set of high-speed peripherals including multiple Gigabit Ethernet controllers, PCIe, SATA, and USB interfaces. Operating at 1.2 GHz with low power consumption relative to its performance class, it targets networking, industrial control, and embedded compute applications. A QorIQ P-series processor is a multi-core/multi-thread Power Architecture SoC designed for intelligent networking, secure compute, and embedded workloads. It sits within the hierarchy of embedded processors (PowerPC e500/e5500 family -> QorIQ communications platform -> NXP networking SoCs), combining CPU cores, cache hierarchy, memory controllers, packet processing accelerators, and security engines on a single die. The SoC e5500 core executes the Power ISA 2.06 and includes a double-precision floating point engine, enabling efficient signal-processing and control-plane workloads. Key differentiating features of the P5010 family include single-core e5500 operation at up to 1.2 GHz, integrated 1 MB L2 cache, the Data Path Acceleration Architecture (DPAA) for packet parsing and classification, Trust Architecture security, and DDR3 memory controller support. The 37.5 mm x 37.5 mm FCPBGA-1295 package supports the high pin density required for parallel SerDes lanes and multiple memory/IO interfaces. Per the manufacturer datasheet, the device operates from industrial-grade temperature ranges, and the SoC is offered in multiple speed grades for design flexibility. Typical applications include enterprise and industrial routers, secure gateways, network-attached storage (NAS), industrial automation controllers, single-board compute platforms, and secure appliance designs. The combination of low power envelope and integrated peripherals eliminates the need for companion communication ASICs in many designs. When designing with the FCPBGA-1295, ensure proper PCB stack-up, ball pitch, and thermal management — these high-density BGAs demand controlled-impedance routing, microvia technology, and a substrate or heatsink to dissipate thermal load under sustained operation. This page synthesizes distributor pricing, drop-in alternative notes, and practical design considerations beyond the manufacturer datasheet.

견적 요청 문의하기
P5010NSN7TNB557 - QorIQ P5 PowerPC SoC, 2.0 GHz, 64-bit | NXP
P5010NSN7TNB557

P5010NSN7TNB557 - QorIQ P5 PowerPC SoC, 2.0 GHz, 64-bit | NXP

The NXP P5010NSN7TNB557 is a QorIQ P5 series communications processor built on the PowerPC e5500 64-bit core architecture, operating up to 2.0 GHz with a single-core configuration, housed in a 1295-pin FCPBGA (37.5x37.5 mm) package. It integrates high-performance data-path acceleration, advanced memory controllers (DDR3/DDR3L with ECC), and multiple high-speed SerDes lanes for networking infrastructure. A communications SoC (System-on-Chip) is a highly integrated processor that combines CPU cores, memory controllers, packet-processing accelerators, and a wide range of I/O interfaces into a single die. Within the broader taxonomy, the QorIQ P5 sits in the embedded networking processor category, descending from NXP/Freescale's long-running PowerQUICC and QorIQ families. QorIQ parts are widely used in routers, switches, base stations, and industrial control equipment where deterministic throughput and low latency matter more than raw clock speed. Key features include a 64-bit e5500 core with dual-issue superscalar pipeline, hardware-based pattern matching and encryption acceleration engines, integrated 10 GbE and 1 GbE Ethernet MACs, PCI Express Gen 2 controllers, and support for up to 32 GB of DDR3/DDR3L memory with ECC. The device supports hardware virtualization and Trust Architecture security features. Thermal design power is in the range of typical 30 W-class high-performance networking SoCs and requires a heatsink and airflow in production. Typical applications include enterprise routers and switches, wireless base-station baseband processing, network-attached storage controllers, industrial control systems, and secure networking appliances. Its combination of PowerPC compatibility, hardware cryptography, and high-throughput packet engines makes it well suited to legacy embedded designs and new secure infrastructure builds. The integrated peripherals remove the need for many external bridge chips, simplifying BOM and reducing board complexity. When designing with this device, pay attention to power-sequencing, the SerDes reference clock topology, and DDR3 routing - signal-integrity issues are common failure points. The 1295-ball FCPBGA package requires multi-layer PCB stack-up with microvia technology and a controlled-impedance layout. JTAG debug access must be brought out for production programming. Thermal dissipation must be addressed via heatsink plus airflow, as the package is large-format flip-chip BGA. This page synthesizes distributor inventory, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
P5010NSN7VNB - QorIQ P5 64-bit SoC, 2.0 GHz, 1295-FCBGA | NXP
P5010NSN7VNB

P5010NSN7VNB - QorIQ P5 64-bit SoC, 2.0 GHz, 1295-FCBGA | NXP

The NXP P5010NSN7VNB is a single-core QorIQ P5 series communications processor built on 64-bit Power Architecture e5500 core technology, operating at up to 2.0 GHz and housed in a 1295-ball FC-BGA (FCPBGA) package measuring 37.5 mm × 37.5 mm. A QorIQ communications processor is a system-on-chip (SoC) designed for high-performance networking and control-plane workloads, integrating CPU cores, cache hierarchy, memory controllers, packet-processing acceleration, and multiple high-speed serial interfaces into a single device. The P5 platform sits within NXP's broader QorIQ family hierarchy (P1 -> P2 -> P3 -> P4 -> P5 -> P10), positioned as a mid-to-high-end 64-bit Power Architecture SoC for control plane and computer applications. Key features include 64-bit Power Architecture e5500 core, 2.0 GHz maximum frequency, DDR3 memory controller with ECC, integrated hardware acceleration for packet parsing and classification, and high-bandwidth peripheral interfaces including PCIe, Gigabit Ethernet, and Serial RapidIO (SRIO). The 1295-ball FC-BGA exposes the full peripheral set and address/data buses needed for embedded networking designs. Architecturally, the device combines an out-of-order e5500 core with platform-wide coherency fabric, large on-chip caches, dedicated SEC (security engine) block, and pattern-matching engines for accelerated packet inspection. Per-cycle efficiency enables high single-threaded control-plane performance at relatively modest power envelopes compared with multi-core variants. Typical applications include network routers and switches, control-plane processing, base-station equipment, industrial networking appliances, and embedded computing platforms requiring deterministic single-threaded 64-bit performance with hardware-accelerated I/O. When designing with the P5010, allocate a multi-layer PCB with matched-impedance routing for DDR3, PCIe, SRIO, and SerDes lanes, and follow NXP's reference board layout and power-sequencing guidelines to achieve the rated 2.0 GHz. The hardware acceleration blocks should be initialized per reference manual to maximize packet throughput. This page consolidates NXP product, distributor pricing, and lifecycle data with cross-reference alternatives and design notes not found in the standalone QorIQ P5 reference manual.

견적 요청 문의하기
P5010NXE1QMB - QorIQ P5 1.6GHz e5500 SoC | NXP | Networking
P5010NXE1QMB

P5010NXE1QMB - QorIQ P5 1.6GHz e5500 SoC | NXP | Networking

The NXP P5010NXE1QMB is a single-core 64-bit Power Architecture system-on-chip (SoC) from the QorIQ P5 family, built on the e5500 core and offered in a 1295-ball FC-PBGA package with 37.5 mm x 37.5 mm body. It integrates a 1.6 GHz (with 2.0 GHz turbo) CPU, DDR3 memory controller, PCIe, Serial RapidIO (SRIO), Gigabit Ethernet, security engine, and pattern-matching hardware acceleration, with an industrial-grade operating temperature range of -40C to +105C. What is a QorIQ SoC? QorIQ is NXP's communications-platform processor family, positioned at the boundary between general-purpose microprocessors and dedicated network processors. The hierarchy is: embedded CPU -> Power Architecture -> QorIQ SoC -> multicore communications platform. QorIQ devices are used to offload packet processing, security, and traffic management from application CPUs in routers, switches, base stations, and industrial gateways. The P5010 belongs to the P5 series, focusing on single- and dual-core networking workloads. Key features include a single e5500 core with 64-bit Power Architecture instruction set, dual-issue superscalar pipeline, integrated DDR3/3L controller with ECC up to 1.33 GT/s, and hardware accelerators for packet classification, encryption, and regular-expression matching. The SoC also integrates multiple Gigabit Ethernet interfaces, multiple PCIe Gen2 lanes, two SRIO ports, four UARTs, two I2C, and an SPI interface, eliminating the need for external bridges. The P5010NXE1QMB is fabricated in a 45 nm CMOS process and powered from a 1.1 V core rail, making it suitable for power-constrained appliance designs. The 'NXE1QMB' suffix indicates an extended-temperature (NX) industrial SKU with security engine (E1) and revision QMB (revision 2.0). Typical applications include industrial networking gateways, edge routers, LTE small-cell base stations, defense and aerospace packet processors, and secure industrial IoT gateways. The integrated SEC engine supports IPSec, SSL/TLS, and SRTP, enabling secure VPN termination at the network edge. When designing with this part, ensure the PCB has sufficient microvia escape routing for the 1.00 mm pitch BGA, plan thermal coupling via a heatsink interface lid, and validate the DDR3 fly-by topology with the IBIS models in the hardware design guide. Extensive pre-silicon simulation is recommended because the BGA rework cost is high. This page synthesizes distributor availability, drop-in same-family alternatives, and design notes not found in any single manufacturer datasheet.

견적 요청 문의하기
P5010NXE1QMB557 - QorIQ P5010 e5500 SoC 1.6GHz FC-PBGA-1295 | NXP
P5010NXE1QMB557

P5010NXE1QMB557 - QorIQ P5010 e5500 SoC 1.6GHz FC-PBGA-1295 | NXP

The NXP Semiconductors P5010NXE1QMB557 is a QorIQ P5010 communications processor based on the 64-bit Power Architecture e5500 core, delivered as a single-core variant in a 1295-ball FC-PBGA (37.5x37.5 mm) package. It operates at frequencies up to 1.6 GHz with 1600/1200 MHz r2.0 silicon, integrates DDR3/3L memory controllers with ECC, and exposes high-speed serial interfaces including PCIe, Serial RapidIO (SRIO), and Gigabit Ethernet. A communications processor (often called an SoC or network processor) is a highly integrated silicon device that combines one or more CPU cores, memory controllers, packet-processing accelerators, and multiple industry-standard I/O interfaces in a single package. The QorIQ family sits between general-purpose microcontrollers and full server CPUs in the embedded computing hierarchy: QorIQ P5 -> e5500-based communications SoC -> Power Architecture networking SoC -> NXP embedded processor portfolio. These devices are engineered for wire-line and wireless infrastructure where deterministic throughput, deep packet inspection, and reliable high-bandwidth I/O are mandatory. Key specifications include a single e5500 core running up to 1.6 GHz, dual-core coherent fabric interconnect on P5020 sibling, 32 KB I-cache and 32 KB D-cache per core, large platform caches, hardware acceleration engines, integrated SEC (Security) engine, and an extended operating temperature range of -40C to +105C. The 1295-terminal FC-PBGA package uses a 1.00 mm ball pitch and includes boundary-scan capability for production test. The architecture leverages Power Architecture e5500 with hardware-managed coherency, integrated memory controller supporting DDR3/DDR3L with ECC, and on-die SerDes lanes that fan out to multiple interface standards. Hardware-acceleration engines offload typical packet-processing tasks, freeing the CPU for control-plane and exception handling. The SEC block accelerates cryptographic workloads including IPsec and bulk-data ciphers. Typical applications include enterprise routers and switches, wireless base stations (LTE/eNodeB), network-attached storage controllers, industrial control planes, defense and aerospace communications, and single-board compute modules for line-rate packet processing. The extended temperature range qualifies the part for outdoor industrial and telco OLT/ONU deployments. When designing with this device, ensure the PCB provides the full 37.5x37.5 mm FC-PBGA land pattern with microvia stack-up, since 1.00 mm pitch BGA assembly typically requires laser-drilled vias. Power sequencing on the multiple voltage rails must follow the QorIQ P5010 reference board design guide to avoid latch-up. The part is supplied on tape-and-reel or tray; production programming should use the NXP CodeWarrior or QorIQ SDK toolchains. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
P5010NXE1TNB - QorIQ 64-Bit Power Arch SoC 2.0GHz | NXP
P5010NXE1TNB

P5010NXE1TNB - QorIQ 64-Bit Power Arch SoC 2.0GHz | NXP

NXP P5010NXE1TNB is a QorIQ P5 series 64-bit Power Architecture system-on-chip with a single e5500 core running at 2.0 GHz, housed in a 1295-pin FCPBGA (37.5 x 37.5 mm) package. It integrates DDR3/3L memory controller, PCIe, Gigabit Ethernet, hardware acceleration, SEC (security engine), and serial RapidIO (SRIO), operating from -40C to +105C for extended-temperature applications. A microprocessor (MPU) is an integrated circuit that executes instructions fetched from memory and serves as the central processing unit of an embedded system. Within the MPU taxonomy, the P5010 belongs to the Power Architecture e5500 family, which in turn fits into the broader categories of embedded processor -> application-specific SoC -> communications processor. This hierarchy matters because QorIQ SoCs target networking, telecom, and industrial infrastructure rather than general-purpose PCs. Key features of the P5010NXE1TNB include 64-bit Power Architecture e5500 processing at 2.0 GHz with out-of-order execution, integrated DDR3/DDR3L memory controller with ECC support, multiple high-speed serial interfaces (PCIe, SRIO, GbE), hardware-accelerated cryptography via SEC, and an extended operating temperature range of -40C to +105C. The -NXE1 suffix specifically denotes the extended-temperature grade with encryption enabled, while the TNB suffix indicates a specific speed/revision stepping per NXP ordering information. Architecturally, the e5500 core combines dual-issue out-of-order pipelines with a high-bandwidth CoreNet coherency fabric, allowing tight integration with companion QorIQ chips for symmetric multiprocessing. Compared with the dual-core P5020, the P5010 is the single-core variant with lower power dissipation at the cost of throughput in heavily multi-threaded workloads. Typical applications for the P5010NXE1TNB include wired and wireless base station controllers, industrial routers and gateways, network-attached storage (NAS), telecom edge platforms, and secure communications appliances. Engineers select this part when extended-temperature operation, integrated hardware security, and the QorIQ ecosystem (Linux BSP, CodeWarrior tools) are required in a single SoC. When designing with the P5010NXE1TNB, plan the PCB layout around the 37.5 mm FCPBGA substrate first - a 6+ layer board with HDI microvias is typically required. Pay close attention to DDR3 trace matching, SerDes reference clock jitter, and thermal dissipation: even at single-core the SoC can dissipate in the high single-digit watts under sustained load, demanding a solid ground/power plane strategy. This page consolidates distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기