P5010NSN1QMB557 - QorIQ P5 2GHz PowerPC e5500 SoC | NXP
부품 번호: P5010NSN1QMB557 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $268.5 | $2,685.00 |
| 100 | $245 | $24,500.00 |
| 500 | $220 | $110,000.00 |
| 1,000 | $198 | $198,000.00 |
P5010NSN1QMB557 개요
A microprocessor (MPU) is an integrated circuit that contains a central processing unit, cache hierarchy, memory controllers, and a wide peripheral set on a single die. QorIQ P-series parts belong to the Power Architecture ecosystem - a family of 64-bit embedded processors that bridge networking, storage, and industrial control. Within the broader taxonomy they sit under microprocessors -> integrated circuits -> semiconductors, sitting alongside ARM-based application processors and x86 server CPUs but optimized for packet processing and deterministic latency.
Key features of the P5010 include the e5500 64-bit core with hardware virtualization, dual DDR3 memory controllers with ECC, integrated security engines (SEC), multiple RGMII/SGMII/XAUI / PCIe / SATA / USB interfaces, and on-chip SRAM for low-latency lookups. The platform is qualified for 0C to 105C ambient operation, suiting NEBS-style telecom chassis as well as fan-cooled industrial gateways. The 1295-FCPBGA provides the ball pitch and pin-out needed for multilayer PCB designs with matched impedance SERDES routing.
Architecturally, the e5500 pipeline executes up to two instructions per cycle and supports out-of-order completion with branch prediction, while the platform incorporates CorDA acceleration via hardware assists for queue management and cryptography. The SEC 4.0 block accelerates DES/3DES/AES/SHA and public-key algorithms, offloading security processing from the core for line-rate IPSec and SSL.
Typical applications include enterprise routers and switches, network security appliances (firewall, UTM), wireless base station controllers, storage controllers, and industrial control with deterministic networking. The combination of single high-frequency core plus ECC memory and SEC acceleration makes it ideal for low-latency control plane code.
Design consideration: the FCBGA requires 8-layer minimum PCB with matched-length SERDES lanes; thermal design must keep junction below 105C with top-side heatsink plus thermal vias. Ensure firmware (U-Boot, Linux BSP) is available for your derivative before committing to layout.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the bare NXP datasheet, giving procurement and engineering a single reference for the P5010NSN1QMB557.
드롭인 대체품: P5010NSN1QMB557 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: P5010NSN1QMB557 (동일 폼 팩터 및 풋프린트) — 차이점: Architecture, Core Count, Ethernet, Hardware Acceleration, Memory Controller.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
P5010NSN1QMB
✅ 드롭인✓ 재고 있음
$318.25 / 개
데이터시트 보기 →P5020NSN1QMB
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
P5040NSN1QMB
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
P5010NSN7QMB
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
P5020NSN7QMB
✅ 드롭인✓ 재고 있음
$289.99 / 개
데이터시트 보기 →P5010NSN1QMB557 최대 정격 & 전기적 특성
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | QorIQ P5 |
| Core Processor | PowerPC e5500 |
| Number of Cores | 1 |
| Core Architecture | 64-bit Power Architecture |
| Core Speed | 2.0 GHz |
| 패키지 / 케이스 | 1295-BBGA, FCBGA |
| Supplier Device Package | 1295-FCPBGA (37.5 x 37.5 mm) |
| 실장 유형 | Surface Mount |
| 동작 온도 | 0C to 105C (TA) |
| Product Status | Active |
| Terminal Form | Ball |
| Number of Terminals | 1295 |
| Package Code | BGA |
P5010NSN1QMB557 bga 핀 구성 가이드
P5010NSN1QMB557(bga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: P5010NSN1QMB557.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
P5010NSN1QMB557 적합 용도: 6 애플리케이션s: Enterprise Router Control Plane, Network Security Appliance (UTM / Firewall), Wireless Base Station Controller, Storage Controller / RAID Adapter, Industrial Deterministic Networking Gateway, Defense / Long-Life Embedded Computing.
Enterprise Router Control Plane
The NXP P5010NSN1QMB557 fits enterprise router control-plane designs where a single high-frequency e5500 core at 2.0 GHz delivers deterministic throughput for routing-protocol processing (OSPF, BGP, IS-IS). Its dual DDR3 controllers with ECC handle large routing tables without soft errors. Compared to multi-core parts, the single-core P5010 simplifies firmware partitioning and timing analysis for line-rate forwarding decisions, while the SEC 4.0 block accelerates IPSec tunnel setup. Placed on the control card with PCIe links to line cards, it acts as the supervisor CPU; the 1295-FCBGA footprint allows up to four SERDES lanes to dedicated switching fabric.
추천
Network Security Appliance (UTM / Firewall)
In unified threat management and next-generation firewall appliances, the P5010NSN1QMB557 combines a 2 GHz e5500 core with the SEC 4.0 cryptographic engine to deliver line-rate IPSec and SSL inspection. The single-core architecture suits medium-throughput SMB and branch-office deployments where sustained gigabit throughput is required without the cost of multi-core QorIQ parts. With dual DDR3 controllers and ECC, deep-packet-inspection scratch tables stay protected from soft corruption. The platform runs hardened Linux with netfilter or commercial UTM stacks; the 1295-FCBGA package supports -40 to 105C extended temperature operation for industrial deployments.
추천
Wireless Base Station Controller
The P5010NSN1QMB557 supports small-cell and pico-cell base station controller boards where the e5500 core handles Layer-2/3 backhaul traffic and the SEC block secures the S1 interface. The 2 GHz clock rate accommodates LTE timing requirements with software margin, while dual DDR3 with ECC protects against radiation-induced bit flips in tower-mounted equipment. The platform's SGMII and XAUI SERDES connect directly to baseband modems and backhaul Ethernet. Compared to ARM Cortex-A9 alternatives, the PowerPC e5500 offers stronger single-thread performance for control-plane algorithms and mature telecom BSP availability.
추천
Storage Controller / RAID Adapter
In RAID adapters and storage controllers, the P5010NSN1QMB557 drives SAS/SATA channels and PCIe links to host systems with the e5500 core at 2.0 GHz handling XOR calculations and metadata updates. The integrated SATA controller and PCIe lanes reduce external bridge count, while the SEC engine accelerates self-encrypting drive management. Dual DDR3 with ECC handles large write-back caches without silent data corruption. The 1295-FCBGA package fits standard PCIe card footprints with the heatsink on top. Compared to ARM-based parts, the PowerPC ecosystem offers mature MD-RAID and ZFS-on-Linux support.
추천
Industrial Deterministic Networking Gateway
The P5010NSN1QMB557 fits industrial deterministic-networking gateways that bridge PROFINET, EtherCAT, and TSN streams to enterprise Ethernet. The single e5500 core at 2 GHz provides deterministic latency for cyclic real-time frames, while the SEC block secures OPC-UA tunnels. The 0 to 105C operating range suits factory-floor cabinets, and the FCBGA package withstands industrial shock and vibration when properly mounted. Compared to newer Layerscape parts, the P5010 offers lower cost and longer lifecycle availability through Rochester Electronics for industrial customers planning 10+ year deployments.
추천
Defense / Long-Life Embedded Computing
Defense and avionics programs select the P5010NSN1QMB557 for its 64-bit e5500 core, SEC 4.0 cryptographic engine, and long-term availability through Rochester Electronics. The 1295-FCBGA package provides rugged mounting for conduction-cooled boards. Combined with ECC-protected DDR3, the platform supports mission-critical software under MIL-STD-810 environmental stress. Compared to consumer SoCs, the QorIQ P5 family offers trusted foundry sourcing, controlled configuration, and ITAR-friendly export classification for sensitive deployments. Software ecosystems include VxWorks 7, INTEGRITY, and LynxOS-178 for DO-178 / DO-254 certification programs.
추천
추천 제품 요약
엔지니어링 참조 데이터: P5010NSN1QMB557 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | P5010NSN1QMB | P5020NSN1QMB | P5040NSN1QMB | P5010NSN7QMB | P5020NSN7QMB |
|---|---|---|---|---|---|---|
| Package | 1295-FCBGA (37.5x37.5 mm) | 1295-FCBGA (37.5x37.5 mm) - same | 1295-FCBGA (37.5x37.5 mm) - same | 1295-FCBGA (37.5x37.5 mm) - same | 1295-FCBGA (37.5x37.5 mm) - same | 1295-FCBGA (37.5x37.5 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | PowerPC e5500 64-bit | PowerPC e5500 64-bit | PowerPC e5500 64-bit (x2) | PowerPC e5500 64-bit (x4) | PowerPC e5500 64-bit | PowerPC e5500 64-bit (x2) |
| Number of Cores | 1 | 1 | 2 | 4 | 1 | 2 |
| Core Speed | 2.0 GHz | 2.0 GHz | 2.0 GHz | up to 2.4 GHz | 2.0 GHz | 2.0 GHz |
| Operating Temperature | 0C to 105C | 0C to 105C | 0C to 105C | 0C to 105C | -40C to 105C (industrial) | -40C to 105C (industrial) |
| Memory Controller | Dual DDR3 ECC | Dual DDR3 ECC | Dual DDR3 ECC | Dual DDR3 ECC | Dual DDR3 ECC | Dual DDR3 ECC |
| Security Engine | SEC 4.0 | SEC 4.0 | SEC 4.0 | SEC 4.0 | SEC 4.0 | SEC 4.0 |
| Package Pin Count | 1295 balls | 1295 balls | 1295 balls | 1295 balls | 1295 balls | 1295 balls |
주요 차별점
- Single-core 2 GHz e5500 with mature QorIQ BSP (vs P5020NSN1QMB)
- Lower cost entry into QorIQ P5 platform (vs P5040NSN1QMB)
- Commercial-extended 0 to 105C temperature range (vs P5010NSN7QMB)
설계 노트
Estimated: at 2 GHz with all SERDES active, the P5010NSN1QMB557 typically dissipates 8-12 W depending on workload. With theta_JA around 12-15 C/W on a properly designed 8-layer PCB with thermal vias and top-side heatsink, junction temperature stays within the 0 to 105C operating range. Use NXP's thermal model from the hardware design guide and place a thermal sensor near the die center for closed-loop fan control. Industrial temperature variants (P5010NSN7QMB) extend the range to -40C.
Recommended: the 1295-FCBGA mandates an 8-layer PCB minimum with continuous ground planes under the BGA and matched-impedance SERDES routing. Reference the NXP QorIQ P5 hardware design guide for stackup recommendations. Place decoupling capacitors (0.1 uF + 10 uF) within 5 mm of every power pin, and route DDR3 address/command signals with 50-ohm controlled impedance and length matching within 25 mil across byte lanes.
Critical: do not confuse P5010NSN1QMB557 (NXP) with P5010NSN1QNB (NXP Freescale legacy marking) - the pinout and SERDES lane mapping differ between FCPBGA and FCPBGA-N revisions. Always validate the exact top marking against the NXP product change notification database. The '557' suffix in NXP convention denotes the tape-and-reel packaging code for the 1295-FCBGA tray variant - same die, different packing.
규정 준수 정보
RoHS, lead-free and halogen-free status not present in verified web data; AEC-Q100 not applicable to networking MPU; NXP publishes conflict-minerals compliance under its Dodd-Frank disclosures
