마이크로컨트롤러

제품 (18732)

ATSAMD51G19A-MF - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAMD51G19A-MF

ATSAMD51G19A-MF - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAMD51G19A-MF is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, delivering up to 120 MHz CPU performance with hardware floating-point unit, packaged in a 48-pin 7x7 mm QFN. It integrates 512 KB of dual-panel Flash with ECC and 192 KB of SRAM, addressing high-performance general-purpose designs that need more headroom than Cortex-M0+ parts without moving to Cortex-M7. A microcontroller (MCU) is a single-chip computer that combines a processor core, program and data memory, and a rich set of on-chip peripherals. The Cortex-M4F core specifically adds DSP extensions and an FPU so the SAM D51 can execute single-precision floating-point operations in hardware, accelerating signal-processing and control loops. Microcontrollers sit below microprocessors in the embedded hierarchy (MCU -> 32-bit MCU -> ARM Cortex-M -> Cortex-M4F -> SAM D51 family), and above simple digital logic ICs, occupying the "compute + control" tier of the system. The SAM D51 series in particular targets connected, low-power, and human-machine-interface applications. Key features include a Cortex-M4F core with FPU at 120 MHz, 512 KB dual-bank Flash with error-correction, up to 192 KB SRAM with ECC, a 12-bit 1 MSPS ADC with up to 16 channels, a 12-bit 1 MSPS DAC, USB 2.0 Full-Speed with integrated PHY, up to 6 SERCOM serial interfaces, I2S, CAN-FD, and an on-chip 32 kHz RTC plus multiple timers. The 48-QFN package exposes 38 GPIO, multiple analog and digital peripherals, and operates from 1.71 V to 3.6 V with industrial -40C to +125C temperature range. Architecturally, the SAM D51 uses Microchip's event system, peripheral touch controller, and configurable SERCOM blocks so that one peripheral can serve UART, SPI, I2C, or LIN on the fly. The dual-panel Flash allows live firmware updates (in-place + simultaneous writes) without external memory, while ECC protects against bit flips in safety-relevant code paths. The integrated USB PHY removes external components, saving BOM cost in connected designs. Together these features let engineers add rich peripherals and connectivity to battery-powered or industrial devices without sacrificing determinism. Typical applications include USB peripherals (HID, CDC, MIDI), industrial sensor hubs, motor and lighting controllers, IoT edge nodes, low-power audio front-ends, and HMI panels with touch. Designers frequently pair the SAM D51 with QSPI NOR flash for larger buffers, Ethernet controllers for wired connectivity, and MEMS sensors over I2C/SPI for environmental sensing. When designing with the ATSAMD51G19A-MF, plan the boot sequence: the part supports secure boot, dual-bank OTA via flash overwrite, and configurable brown-out behavior. Use Atmel/Microchip Studio or MPLAB X with the START project generator to pick the right clock tree and pin-mux configuration before committing to PCB layout. Ensure decoupling is placed close to all VDD/VDDIO pins and that the exposed pad of the QFN-48 is tied to a solid ground copper pour for thermal dissipation. This page synthesizes distributor pricing, drop-in compatible alternatives from the SAM D51 and SAME51 families, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for sourcing and qualifying the ATSAMD51G19A-MF.

견적 요청 문의하기
ATSAMD51G19A-MFT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAMD51G19A-MFT

ATSAMD51G19A-MFT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAMD51G19A-MFT is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, running up to 120 MHz with single-precision floating point and a full DSP instruction set, packaged in a 48-pin VQFN (7x7 mm) and qualified for the extended industrial temperature range. It integrates 512 KB of dual-panel Flash with ECC and up to 192 KB of SRAM, plus a high-speed USB 2.0 Full-Speed device/host interface and a sophisticated SERCOM peripheral set. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (timers, ADC, communication controllers, GPIO) into one package. The ARM Cortex-M family is the dominant 32-bit MCU architecture for embedded systems, and Cortex-M4F specifically adds hardware single-precision floating point and DSP extensions, making it a step up from Cortex-M0/M3 parts in signal-processing capability. The SAM D51 line sits in Microchip's high-performance tier, between the mainstream SAM D20/D21 and the more capable SAME70/SAMS70 families. Key features of the ATSAMD51G19A-MFT include six SERCOM modules (each configurable as UART/SPI/I2C), a 12-bit 1 Msps ADC with up to 16 channels, a 10-bit 300 ksps DAC, multiple 16-bit timers, an I2S/SSC audio interface, a CAN-FD controller, and a QSPI interface for external memory expansion. The device also integrates a full-speed USB 2.0 transceiver supporting both device and host modes, eliminating the need for an external PHY in most designs. On the architecture side, the ATSAMD51G19A-MFT uses Microchip's event system, a peripheral-to-peripheral interconnect that lets timers, DMA, and GPIO trigger each other without CPU intervention - useful for low-latency, deterministic real-time designs. The dual-panel Flash with ECC and the banked SRAM layout support firmware updates in the field while executing from the other bank, simplifying bootloader design for IoT and remote-update products. Typical applications include USB human-interface devices (keyboards, mice, audio class peripherals), industrial sensor hubs, motor control boards, IoT gateways, and audio-processing subsystems. The combination of USB, CAN-FD, and 1 Msps ADC makes it a strong fit for industrial instrumentation where a single MCU can handle both communications and analog front-end work. When laying out a board, dedicate continuous copper under the exposed pad to the same ground plane, place the 32.768 kHz and 12 MHz crystals within 5 mm of their pins, and keep the VDDIO and VDDCORE decoupling (100 nF + 1 uF per pin) within 2 mm of each supply pin. USB DP/DM traces must be 90 ohm differential and length-matched. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that go beyond what the manufacturer datasheet alone provides, giving a complete procurement and engineering decision view in one place.

견적 요청 문의하기
ATSAMD51G19A-MU - 120MHz Cortex-M4F MCU 512KB Flash | Microchip
ATSAMD51G19A-MU

ATSAMD51G19A-MU - 120MHz Cortex-M4F MCU 512KB Flash | Microchip

The Microchip Technology ATSAMD51G19A-MU is a high-performance 32-bit ARM Cortex-M4F microcontroller with Floating Point Unit, running up to 120 MHz, and packaged in a 48-pin QFN (7x7 mm) with exposed thermal pad. The SAM D51 variant integrates 512 KB of dual-panel Flash with ECC and 192 KB of SRAM, targeting general-purpose embedded designs that require DSP-class signal processing and rich connectivity. An ARM Cortex-M4F microcontroller is a 32-bit processor core built on the ARMv7-M architecture, featuring a hardware single-precision Floating Point Unit (FPU) compliant with IEEE 754, a Memory Protection Unit (MPU), and DSP extensions. Within the broader taxonomy, the ATSAMD51G19A-MU is an MCU, a sub-category of microcontrollers, which falls under Embedded Processors and Controllers in the Integrated Circuits family. The Cortex-M4F core enables efficient execution of complex math, sensor-fusion algorithms, and audio processing without external DSP hardware. Key features include an integrated FPU for floating-point math, 512 KB of program storage, 192 KB SRAM, a Cryptographic Accelerator for AES, True Random Number Generator (TRNG), Public Key Cryptography support, and a high-speed Multi-bit ECC-protected Flash. The device provides advanced connectivity with a 12-bit 1 Msps ADC, 12-bit DAC, analog comparators, multiple SERCOM interfaces configurable as UART/SPI/I2C, and a high-speed USB 2.0 interface. The 48-QFN package features a thermal pad for improved thermal dissipation. Technically, the ATSAMD51G19A-MU runs at a maximum CPU clock of 120 MHz delivering 150 DMIPS and 273 CoreMark performance. The dual-panel Flash architecture supports simultaneous read-while-write operations, enabling live firmware updates without halting execution. Power management includes multiple low-power Sleep modes and an integrated buck converter for core supply, reducing overall system power consumption. The Event System and Peripheral Touch Controller (PTC) support capacitive touch sensing directly on hardware pins. Typical applications include IoT edge nodes, industrial control and HMI panels, audio processing devices with USB audio class support, smart sensor hubs with on-device sensor fusion, motor control with FOC algorithms, and wearable health monitoring devices. The cryptographic accelerator and TRNG also make it suitable for secure connected devices requiring hardware-rooted identity. When designing with this MCU, allocate sufficient decoupling capacitance near each supply pin and ensure the thermal pad is soldered to a properly sized copper pour for optimal heat dissipation. Configure the GCLK generators carefully to avoid peripheral clock conflicts, and validate that the chosen FPU code paths are properly compiled with hardware floating-point flags. This page synthesizes distributor pricing, drop-in same-brand and cross-brand alternatives, and practical design notes not found in the manufacturer datasheet alone, providing a faster cross-reference for engineers selecting Cortex-M4F microcontrollers in compact 48-pin QFN packages.

견적 요청 문의하기
ATSAMD51G19A-MU-EFP - 120MHz Cortex-M4F MCU, 512KB Flash, 48-VQFN
ATSAMD51G19A-MU-EFP

ATSAMD51G19A-MU-EFP - 120MHz Cortex-M4F MCU, 512KB Flash, 48-VQFN

The Microchip Technology ATSAMD51G19A-MU-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, running up to 120 MHz with 512 KB Flash and 192 KB SRAM, housed in a 48-pin VQFN (7x7 mm) package with extended Flash performance. The -EFP suffix designates Microchip's extended Flash performance and -40C to +85C industrial temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals into one IC. Within the broader semiconductor hierarchy, MCUs sit between general-purpose microprocessors (MPUs) and digital signal controllers (DSCs); the SAM D51 specifically belongs to the Cortex-M4F class of MCUs that pair a Cortex-M4 core with a single-precision Floating Point Unit (FPU) and DSP extensions. This places it above Cortex-M0+/M3 devices in compute capability while remaining lower-power than Cortex-M7 parts. Key features include the 120 MHz Cortex-M4F core with FPU, 512 KB dual-panel Flash with ECC, 192 KB SRAM with ECC, a full-speed USB 2.0 interface with on-chip PHY, up to six SERCOM serial interfaces, a 12-bit 1 MSPS ADC, two 12-bit DACs, and a QSPI/SPI interface for external memory. The integrated FPU and DSP instructions enable efficient floating-point math for sensor-fusion and audio workloads without CPU stalls. A 32-channel Event System, 16-bit timers, and a Cryptographic Accelerator (TRNG + AES) round out the on-chip resources. Typical applications include IoT edge nodes, USB audio devices, industrial sensor hubs, HMI panels, and motor-control subsystems. Industrial-grade USB HID/CDC peripherals and connected sensor platforms benefit from the SAM D51's USB PHY, multiple SERCOM instances, and AES/TRNG hardware security. With extended Flash performance the -EFP variant guarantees higher Flash endurance and faster wait-state behaviour for read-while-write firmware updates. When designing with this MCU, place the on-chip decoupling capacitor array within 3 mm of the VDD pins and route the USB DP/DM pair as a 90-ohm differential. The boot loader is factory-programmed into a dedicated ROM region, so user Flash starts at 0x00000000 for dual-bank A and the BOOTPROT and NVMCTRL fuses should be locked before production. This page synthesises distributor pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
ATSAMD51J18A-AF - SAM D51 Cortex-M4F MCU 120MHz 256KB | Microchip
ATSAMD51J18A-AF

ATSAMD51J18A-AF - SAM D51 Cortex-M4F MCU 120MHz 256KB | Microchip

The Microchip ATSAMD51J18A-AF is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, running up to 120 MHz with single-precision Floating Point Unit (FPU), 256 KB Flash and up to 128 KB SRAM in a 64-pin TQFP (10x10 mm) package. The device integrates a full-speed USB 2.0 interface, a high-speed 12-bit ADC, multiple SERCOM peripherals, I2S, and SDHC support, addressing high-performance embedded applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of peripherals such as timers, communication controllers, and analog blocks. The Cortex-M4F sits within the broader taxonomy of ARM Cortex-M cores (M0/M0+ -> M3 -> M4/M4F -> M7) and is positioned for DSP-class workloads while retaining deterministic interrupt behaviour and low-power Sleep modes. The SAM D51 family extends this core with Microchip's peripheral set, dual-panel Flash with ECC, and a dedicated Cortex-M4 core with FPU for floating-point acceleration. Key features of the ATSAMD51J18A-AF include: up to 120 MHz core clock with single-precision FPU and DSP instructions, 256 KB dual-panel Flash with error correction, up to 128 KB SRAM, full-speed USB 2.0 device/host with on-the-go capability, a 12-bit 1 MSPS ADC with up to 16 channels, multiple SERCOM modules configurable as UART/SPI/I2C, I2S for digital audio, SDHC for memory cards, and an extended industrial operating temperature range. The 64-pin TQFP package balances I/O count with hand-solder-friendly pitch, simplifying prototype bring-up. The architecture combines a Cortex-M4F core with a multi-layer bus matrix (AHB/APB) that allows simultaneous DMA-driven peripheral access and CPU execution. Hardware cryptographic acceleration (AES, True Random Number Generator), a high-precision internal 48 MHz DFLL, and an Event System for inter-peripheral signalling reduce CPU overhead and enable deterministic real-time response. Compared with Cortex-M0+ parts in the SAM D20/D21 family, the D51 delivers roughly 4x compute performance and substantially richer analog and connectivity resources. Typical applications include industrial HMI panels, USB peripherals such as HID and CDC devices, audio playback stages using I2S codecs, smart sensor hubs, and low-power IoT edge nodes. The integrated FPU simplifies control-loop math and DSP-style filtering on a single MCU without an external DSP. When designing with the ATSAMD51J18A-AF, ensure the 64-pin TQFP land pattern is allocated correctly and that decoupling follows Microchip's recommended 100 nF + bulk capacitor scheme near each supply pin. For USB applications the DP/DN lines require 90 ohm differential routing and an ESD array; for I2S audio, the MCLK-to-LRCLK ratio must match the codec's requirements and jitter on MCLK should be kept below the codec's specification.

견적 요청 문의하기
ATSAMD51J18A-AU - 120MHz Cortex-M4F MCU 256KB Flash 64-TQFP | Microchip
ATSAMD51J18A-AU

ATSAMD51J18A-AU - 120MHz Cortex-M4F MCU 256KB Flash 64-TQFP | Microchip

The Microchip Technology ATSAMD51J18A-AU is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision Floating Point Unit, delivering 256 KB of flash and up to 256 KB SRAM in a 64-pin TQFP (10x10 mm) package. It belongs to the SAM D5x/E5x family and integrates a rich peripheral set including a 12-bit ADC, 12-bit DAC, SERCOM, I2S, USB, and an on-chip PTC touch controller. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (flash), data memory (SRAM), and integrated peripherals. The Cortex-M4F core implements the ARMv7-M architecture with hardware FPU and DSP extensions, enabling deterministic real-time control and floating-point signal processing. The ATSAMD51J18A-AU is engineered for general-purpose embedded applications that need DSP performance and analog integration on a single die. Key features include up to 120 MHz CPU clock with 2.46 CoreMark/MHz, hardware FPU, 256 KB flash with ECC, 256 KB SRAM with ECC, a 12-bit 1-MSPS ADC, 12-bit DAC, SERCOM (configurable UART/SPI/I2C), USB 2.0 full-speed with on-chip PHY, I2S, and a Peripheral Touch Controller (PTC) for capacitive touch sensing. The device also includes a 32-bit RTC, multiple timer/counters, and an Event System for hardware-triggered peripheral interactions without CPU involvement. Architecturally, the ATSAMD51J18A-AU uses Microchip's SAM D5x bus matrix with separate AHB/APB bridges, enabling concurrent peripheral DMA and CPU execution. The Event System routes peripheral triggers across the chip in zero CPU cycles, and the DMA controller supports scatter-gather transfers for high-throughput sensor streams. The integrated FPU eliminates software floating-point emulation for signal-processing tasks such as audio decoders, motor control loops, and sensor fusion. Typical applications include industrial control panels with capacitive touch UI, smart energy metering, USB-connected data loggers, audio effect processors, low-power IoT gateways, and BLDC/PMSM motor controllers using field-oriented control. The Cortex-M4F DSP and FPU accelerate audio decoding and motor math by 10-100x compared to M0+ devices. When designing with this hardware, plan the 64-pin TQFP layout carefully because the larger flash variants share the same package footprint. The -AU suffix indicates the automotive (125C) operating temperature grade, making the part suitable for harsh industrial and automotive under-hood environments. Refer to the manufacturer datasheet for full peripheral mapping and clock tree details. This page synthesizes distributor pricing from DigiKey, Mouser, LCSC and Heisener, drop-in same-family alternates, design notes and FAQs not bundled in the manufacturer datasheet, including answers to common production-engineering questions about procurement, lifetime, and pin compatibility.

견적 요청 문의하기
ATSAMD51J18A-AU-EFP - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip
ATSAMD51J18A-AU-EFP

ATSAMD51J18A-AU-EFP - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip

The Microchip Technology ATSAMD51J18A-AU-EFP is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with 256 KB Flash and 128 KB SRAM in a 64-pin TQFP (10x10 mm) package. It is part of the SAM D51 family targeted at general-purpose and high-performance embedded applications requiring FPU, DSP, and rich connectivity peripherals. This variant includes a USB 2.0 Full-Speed interface with integrated PHY, a 12-bit ADC up to 1 Msps, DAC, SERCOM, and I2S, making it suitable for sensor fusion, audio, and IoT edge devices. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for program code and SRAM for data), and a rich set of peripherals such as timers, communication interfaces, and analog blocks. Within the broader taxonomy, the ATSAMD51J18A sits in the hierarchy: microcontroller -> 32-bit MCU -> ARM Cortex-M class -> Cortex-M4F (with Floating Point Unit and DSP extensions) -> general-purpose MCU. The FPU accelerates single-precision floating-point math, while DSP extensions enable MAC instructions and SIMD-style operations, both critical for sensor-fusion and signal-processing workloads at low power. Key specifications include 256 KB Flash with ECC, 128 KB SRAM with ECC, 120 MHz Cortex-M4F core, 12-bit 1 Msps ADC with up to 16 channels, 10-bit 350 ksps DAC, six SERCOM configurable serial interfaces (UART/SPI/I2C), USB 2.0 Full-Speed with on-chip PHY, I2S, and an Event System for inter-peripheral signaling. Operating voltage spans 1.71 V to 3.63 V, with a -40C to +85C industrial temperature range, making it well-suited for harsh-environment designs. Architecturally, the ATSAMD51J18A uses a dual-bank Flash with EEPROM emulation support and a 4 KB cache that masks Flash wait-states to sustain single-cycle execution at 120 MHz. The peripheral event system and DMAC offload CPU overhead, allowing deterministic real-time response for motor control, audio decoding, or multi-protocol sensor hubs. Typical applications include industrial IoT gateways, USB-C HID peripherals, portable medical instrumentation, audio effects processors, and low-power robotics controllers. The combination of DSP instructions, FPU, USB, and ample analog peripherals lets a single MCU replace an MPU-plus-external-DSP architecture in cost-sensitive designs. Designers should allocate decoupling capacitors near each VDD pin (100 nF plus bulk 4.7 uF) and follow Microchip's SAM D51 hardware design checklist for crystal layout. For lowest active power, use the SleepWalking mode, and configure the ADC with internal reference and proper acquisition timing to avoid channel crosstalk. This page combines datasheet specifications, distributor pricing, drop-in alternatives, and practical design notes not collated on the manufacturer datasheet, giving engineers a single reference for evaluation and BOM decisions.

견적 요청 문의하기
ATSAMD51J18A-AUT - 120MHz Cortex-M4F MCU 256KB Flash | Microchip
ATSAMD51J18A-AUT

ATSAMD51J18A-AUT - 120MHz Cortex-M4F MCU 256KB Flash | Microchip

The Microchip Technology ATSAMD51J18A-AUT is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, running up to 120 MHz with an integrated Floating Point Unit, 256 KB of Flash, and housed in a 64-pin TQFP (10x10 mm) package. Operating from 1.71V to 3.6V with a maximum CPU clock of 120 MHz, it integrates 256 KB Flash with ECC and up to 128 KB SRAM, plus a rich peripheral set including SERCOM, USB, CAN-FD, and a 12-bit ADC. The 'AUT' suffix indicates automotive-grade qualification suitable for -40C to +85C operation. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and integrated peripherals such as timers, communication interfaces, and analog blocks. The ARM Cortex-M4F architecture belongs to the ARM Cortex-M family, designed for deterministic real-time embedded applications; the 'F' denotes an integrated single-precision Floating Point Unit (FPU). MCUs sit within the broader category of embedded processors, sitting below application processors in computational complexity but offering lower power, deterministic interrupt response, and a smaller footprint ideal for IoT, motor control, and HMI designs. Key features include a 120 MHz Cortex-M4F core with FPU and DSP extensions, 256 KB dual-panel Flash with ECC, up to 128 KB SRAM with ECC, six SERCOM configurable serial interfaces supporting I2C/SPI/UART, a high-speed USB 2.0 Full-Speed device/host port, one CAN-FD controller, a 12-bit 1 MSPS ADC, two 12-bit DACs, and a Real-Time Clock (RTC). The device also integrates an Event System, SleepWalking peripherals for low-power operation, and a Self-Programming Flash controller for in-field OTA updates. The SAM D51 architecture combines deterministic Cortex-M4F processing with Microchip's extensive SmartConnect peripheral IP, enabling flexible pin-mapping through SERCOM multiplexing. The dual-panel Flash with ECC supports robust code execution in noisy automotive and industrial environments, while the FPU accelerates floating-point math for sensor fusion, motor control, and DSP audio workloads without burdening the CPU. Typical applications include automotive body electronics and HMI, industrial IoT sensor nodes, USB human-interface devices (keyboards, mice, touch panels), CAN-FD nodes, motor control with FPU-based field-oriented control, and portable consumer devices. The automotive-grade temperature range and CAN-FD support make this part especially attractive for vehicle gateway and infotainment subsystems. When designing with this device, plan the SERCOM multiplexing carefully because six SERCOM channels can each be mapped to multiple pin sets; this flexibility simplifies PCB layout but requires reference to the device pinout table to avoid conflicts. Provide a clean 3.3V LDO with adequate decoupling (100 nF + bulk) near the VDD pins to support core and I/O switching transients. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
ATSAMD51J18A-AUT-EFP - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip
ATSAMD51J18A-AUT-EFP

ATSAMD51J18A-AUT-EFP - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip

The Microchip Technology ATSAMD51J18A-AUT-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, delivering 120 MHz CPU performance with single-precision Floating Point Unit (FPU), 256 KB of Dual-Panel Flash with ECC, and 256 KB SRAM with ECC in a 64-pin TQFP (10x10 mm) package. The -EFP suffix denotes Extended Flash Performance, an enhanced flash variant qualified for the automotive temperature grade (-40C to +125C) and supplied on Tape & Reel. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for code, SRAM for data), and programmable peripherals. The SAM D51 line belongs to the broader 32-bit ARM Cortex-M family, which dominates modern embedded designs due to its deterministic interrupt handling, low power consumption, and the vast ecosystem of ARM toolchains. Within that family the Cortex-M4F adds hardware single-precision floating point and DSP extensions, positioning the M4F between the smaller Cortex-M0/M3 and the larger Cortex-M7. The SAM D51 further extends the family with high-speed USB, an integrated AES crypto engine, and up to 1 MB flash in higher-order derivatives - making it suitable for industrial IoT, audio processing, and human-machine interface (HMI) applications. Key features include the Cortex-M4F core at 120 MHz with FPU and DSP instructions, 256 KB Dual-Panel Flash supporting live firmware updates, 256 KB SRAM, a 12-bit 1 MSPS ADC, two 12-bit DACs, SERCOM configurable serial peripherals (UART/SPI/I2C), Full-Speed and Hi-Speed USB 2.0 with integrated PHY, and an Event System for hardware-triggered peripheral actions without CPU intervention. The -EFP variant qualifies the part for extended flash performance across the full -40C to +125C automotive-grade temperature range. Architecturally, the device pairs the ARM Cortex-M4F core with a Multi-Layer Bus Matrix that allows simultaneous DMA, USB, and Ethernet traffic without CPU stalls, plus a Peripheral Touch Controller (PTC) supporting capacitive touch sensing. An integrated AES-256 hardware block accelerates secure boot and encrypted communications. Typical applications include industrial IoT gateways, USB-C Human Interface Devices (HID), automotive body and infotainment controllers, audio DSP front-ends, and low-power wireless sensor nodes. The wide operating voltage (1.71V-3.63V) simplifies designs powered by Li-Ion or 3.3V regulated rails. Designers should provision a 1 uF + 100 nF decoupling network near each VDD pin and route the D+/D- USB traces as a 90 ohm differential pair. The Dual-Panel Flash enables safe over-the-air (OTA) firmware upgrades by allowing one panel to receive a new image while the other continues running the current application. This page synthesizes distributor stock and pricing, automotive-grade drop-in alternatives from the same SAM D51 family, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
ATSAMD51J18A-MF - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip
ATSAMD51J18A-MF

ATSAMD51J18A-MF - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip

The Microchip Technology ATSAMD51J18A-MF is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with a single-precision floating-point unit, 256 KB of Flash, 128 KB of SRAM, and a 64-pin QFN-9x9 exposed-pad package. The device is part of the SAM D51 family and is qualified to the AEC-Q100 automotive standard, with an extended operating temperature range. A 32-bit ARM Cortex-M4F microcontroller is a programmable system-on-chip integrating a high-performance processor core, Flash program memory, SRAM, and a rich set of analog and digital peripherals into a single IC. The Cortex-M4F architecture sits within the broader ARM Cortex-M family of embedded cores, which is widely adopted for connected, low-power, and signal-processing IoT and industrial designs. Key features of the ATSAMD51J18A-MF include 120 MHz core operation with FPU, 256 KB Flash and 128 KB SRAM, USB 2.0 Full-Speed device/host, two CAN-FD interfaces, a 12-bit 1 MSPS ADC, two 12-bit DACs, multiple SERCOM peripherals for I2C/SPI/UART, and an integrated PTC touch controller. The 64-pin QFN-9x9 with exposed thermal pad enables compact PCB layouts while providing a low thermal resistance path. On-chip peripherals include a 12-bit 1 MSPS ADC with up to 16 analog channels, two 12-bit DAC channels, multiple SERCOM modules configurable as UART/SPI/I2C, an I2S/serial audio interface, a hardware cryptographic module, and an Event System for low-latency inter-peripheral signaling without CPU intervention. The integrated FPU accelerates single-precision DSP workloads such as audio processing, sensor fusion, and motor-control algorithms. Typical applications for the ATSAMD51J18A-MF include industrial automation controllers, USB-connected IoT gateways, automotive body and HMI modules, audio-processing subsystems, smart-sensor hubs, and human-machine interface panels with capacitive touch. The combination of USB, CAN-FD, ADC, and touch peripherals allows a single MCU to consolidate what previously required multiple ICs. When designing with this part, ensure the exposed pad is soldered to a sufficient copper pour to maintain the rated thermal performance and to provide a low-impedance ground reference. The ATSAMD51J18A-MF suffix code indicates an industrial/automotive temperature grade and tray packaging, which should be selected to match the end-equipment environment. This page synthesizes distributor pricing, AEC-Q100 qualification context, and drop-in alternative guidance for the SAM D51 family not found in the manufacturer datasheet alone, supporting both new design and existing-platform migration decisions.

견적 요청 문의하기
ATSAMD51J18A-MU - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip
ATSAMD51J18A-MU

ATSAMD51J18A-MU - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip

The Microchip Technology ATSAMD51J18A-MU is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with 256 KB Flash and 128 KB SRAM, housed in a 64-pin QFN (9x9 mm) package. It targets general-purpose embedded applications that demand deterministic real-time performance, a hardware floating-point unit, and rich connectivity peripherals including USB, CAN-FD, SDHC, SERCOM, I2S, and 12-bit ADCs and DACs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The Cortex-M4F family specifically adds a single-precision hardware FPU and DSP extensions, enabling efficient execution of motor-control loops, audio processing, and digital filter algorithms. Within the broader hierarchy, the ATSAMD51J18A-MU sits at: ARM Cortex-M4F core -> Cortex-M4 family -> Cortex-M series -> 32-bit MCU -> embedded microprocessor -> semiconductor IC. Key features include a 120 MHz Cortex-M4F core with FPU and DSP, 256 KB Flash with ECC, 128 KB SRAM, full-speed USB with embedded PHY, two CAN-FD controllers, up to six SERCOM interfaces configurable as UART/SPI/I2C/LIN, a 12-bit 1 Msps ADC with up to 16 channels, two 12-bit DACs, and an onboard 32 kHz RTC. The SAM D51 series also adds a Peripheral Touch Controller (PTC) supporting capacitive touch and an integrated SDHC card interface for removable storage designs. The device operates from 1.71 V to 3.63 V, supporting both 1.8 V and 3.3 V system rails without level translation. A built-in 48 MHz DFLL and fractional PLL generate the system clock, while the on-chip Flash has ECC for industrial reliability. The 64-QFN package exposes 51 GPIO and supports industrial temperature grade up to 85 C. Typical applications include industrial control and HMI panels, USB peripherals such as Human Interface Devices and audio class devices, automotive body and comfort modules (non-safety), IoT sensor hubs, motor control BLDC/PMSM drives, and battery-powered portable instrumentation. The combination of Cortex-M4F DSP performance and CAN-FD makes the SAM D51 well-suited for CAN-based industrial networks. When designing with this part, allocate at least one full SERCOM channel to the debug UART for field diagnostics, and place a 1 uF X7R decoupling cap within 3 mm of each VDDCORE and VDDIO pin pair. Ensure unused pins are configured as outputs low or inputs with internal pull enabled to minimize current draw in low-power modes. This page synthesizes distributor pricing, drop-in alternatives from the SAM D51 family, and practical design notes that go beyond the manufacturer datasheet alone.

견적 요청 문의하기
ATSAMD51J18A-MUT - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip
ATSAMD51J18A-MUT

ATSAMD51J18A-MUT - 120MHz Cortex-M4F MCU, 256KB Flash | Microchip

The Microchip Technology ATSAMD51J18A-MUT is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, operating at up to 120 MHz with 256 KB of dual-panel Flash and up to 128 KB SRAM with ECC, housed in a 64-pin VQFN (9x9 mm) package. It integrates a single-precision Floating Point Unit, hardware multiplier, and DSP extensions, enabling efficient numeric processing for embedded applications. The -MUT suffix indicates tape-and-reel packaging and industrial-grade operating temperature range. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, communication controllers, and analog blocks. The SAM D51 family in particular sits within Microchip's high-performance 32-bit MCU portfolio, positioned above the Cortex-M0+ based SAM D20/D21 lines and below the Cortex-M7 based SAME70/SAMS70 families. It targets applications that need DSP-class math throughput, deterministic real-time control, and substantial connectivity without jumping to a Linux-capable application processor. Key features of the ATSAMD51J18A include the Cortex-M4F core running up to 120 MHz with single-cycle MAC and single-precision FPU, 256 KB dual-panel Flash supporting live updates, 128 KB SRAM with ECC for safety, and a configurable SERCOM peripheral set providing up to six flexible serial interfaces (each can be I2C, SPI, or USART). The device also integrates a 12-bit 1 Msps ADC, two 12-bit DACs, and a high-speed USB 2.0 Full-Speed interface with on-chip PHY. Operating voltage ranges from 1.71 V to 3.6 V, with an industrial temperature grade suitable for commercial and industrial environments. Typical applications include industrial motor control, human-machine interface (HMI) panels, smart energy metering, USB-C peripherals, audio processing front-ends, and IoT edge nodes. The Cortex-M4F DSP instructions accelerate algorithms such as FFTs, FIR filters, and PID control loops, while the integrated USB and SERCOM peripherals simplify connectivity to sensors, displays, and host systems. The 9x9 mm VQFN footprint with 0.5 mm pitch is compatible with the rest of the SAM D51 64-pin pinout family. When designing with this MCU, ensure the VDDCORE pin is decoupled per datasheet recommendations and that the on-chip voltage regulator's inductor is correctly selected. Programming is supported through the SWD interface using Microchip's MPLAB X IDE, Atmel Studio legacy projects, and the SAMD51 core support in the Arduino and PlatformIO ecosystems, enabling rapid prototyping.

견적 요청 문의하기
ATSAMD51J18A-MUT-EFP - 120MHz Cortex-M4F MCU 256KB Flash | Microchip
ATSAMD51J18A-MUT-EFP

ATSAMD51J18A-MUT-EFP - 120MHz Cortex-M4F MCU 256KB Flash | Microchip

The Microchip Technology ATSAMD51J18A-MUT-EFP is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision Floating Point Unit, housed in a 64-pin VQFN (9x9 mm) package with extended flash performance and tape-and-reel packaging. It integrates 256 KB of Flash with ECC, 128 KB of SRAM, and a high-speed USB 2.0 Full-Speed interface with on-chip PHY, plus advanced peripherals such as SERCOM, I2S, and a 12-bit ADC. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and integrated peripherals. Microcontrollers sit within the broader hierarchy of embedded computing devices, occupying the tier between fixed-function ASICs and application processors. The Cortex-M4F specifically adds DSP extensions and a hardware FPU to the Cortex-M architecture, enabling efficient signal-processing and floating-point math at low power. Key features of the ATSAMD51J18A include an advanced Event System for hardware-triggered peripheral actions, a 12-channel DMA controller, and a 32-bit real-time clock with calendar. The device operates from 1.71V to 3.63V supply and supports -40C to +85C industrial temperature range. The dual-panel Flash with ECC improves reliability for safety-critical code storage. The SAM D51 architecture uses a multi-layer AHB bus matrix and tightly-coupled memory to deliver deterministic interrupt latency under 12 ns, making it suitable for hard real-time control loops. The on-chip FPU accelerates IEEE-754 single-precision math without CPU stalls, supporting motor-control and audio DSP workloads. Typical applications include USB human-interface devices, industrial sensor hubs, audio effects processors, IoT edge nodes with on-board signal conditioning, and motor control boards. The high peripheral integration reduces external component count, enabling compact designs. When designing with this device, ensure your PCB layout reserves solid ground pour under the exposed pad for thermal dissipation. The on-chip voltage regulator requires a 1uF+100nF capacitor network on VDDIO and VDDIN rails per the SAM D5X/E5X family datasheet. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, providing engineers with an aggregated reference for sourcing and substitution decisions.

견적 요청 문의하기
ATSAMD51J19A-AFT - 120MHz Cortex-M4F MCU 512KB Flash | Microchip
ATSAMD51J19A-AFT

ATSAMD51J19A-AFT - 120MHz Cortex-M4F MCU 512KB Flash | Microchip

The Microchip Technology ATSAMD51J19A-AFT is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, running up to 120 MHz with an integrated single-precision Floating Point Unit (FPU), 512 KB of dual-panel Flash, and 192 KB of SRAM, all housed in a 64-pin TQFP (10x10 mm) package. It supports a 1.71 V to 3.63 V supply (3.3 V nominal) and operates over the automotive -40 C to +125 C temperature grade, and is AEC-Q100 qualified for safety-critical automotive applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (ADC, DAC, timers, GPIO, communication interfaces) into one IC. The ATSAMD51J19A-AFT belongs to the ARM Cortex-M4F family, which sits in the Cortex-M hierarchy between the Cortex-M0+ (lowest performance, lowest power) and Cortex-M7 (highest performance). The M4F adds DSP extensions and a hardware FPU that accelerates single-precision floating-point math. Microcontrollers such as this one are the workhorse of embedded designs: they sit below SoCs and microprocessors in capability but above simple digital logic in programmability, and they form the brain of nearly every battery-powered or motor-controlled end product. Key features include a 120 MHz Cortex-M4F core with FPU and DSP instructions, 512 KB dual-panel Flash with ECC, 192 KB SRAM, a 12-bit 1 Msps ADC with up to 16 channels, two 12-bit DACs, six SERCOM configurable as USART/SPI/I2C, I2S, USB 2.0 Full Speed with embedded PHY, a CAN-FD interface, and a 51-pin GPIO count. The part integrates a 16-channel Event System, a Parallel Capture Controller, and a 32-bit Real-Time Clock with calendar mode. TrustZone-M is not present on this variant; that feature is reserved for SAM L11 family members. Architecturally, the SAM D51 uses a Harvard-style bus matrix connecting the Cortex-M4F core to Flash via a 2-channel prefetch buffer that masks Flash wait states, plus an AHB/APB bridge for peripherals. The dual-panel Flash architecture allows simultaneous read-while-write, enabling live firmware updates without an external bootloader. The 31 kHz to 120 MHz DFLL and the 32 kHz to 48 MHz DPLL provide fractional-N frequency synthesis, so the system clock can be generated from a low-cost 32.768 kHz crystal while still achieving jitter performance suitable for CAN-FD and USB Full Speed. Typical applications include automotive body controllers and HVAC actuators, industrial HMI communication panels, drone flight controllers (companion to a wireless SoC), USB-CDC/Bridge dongles, sensor fusion hubs, and low-power IoT edge nodes. Design considerations for this part center on decoupling (a 100 nF cap within 2 mm of each VDDCORE/VDDIO supply pin is mandatory), SWD layout for Cortex-M4F debug access, and USB DP/DN trace impedance matching to 90 ohms differential for Full Speed compliance.

견적 요청 문의하기
ATSAMD51J19A-AU - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAMD51J19A-AU

ATSAMD51J19A-AU - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAMD51J19A-AU is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with 512 KB Flash and 192 KB SRAM, housed in a 64-pin TQFP (10x10 mm) package. It belongs to the SAM D51 family and integrates a Floating Point Unit (FPU), 1 MB Dual-Panel Flash with ECC support, and a rich peripheral set including full-speed USB, CAN-FD, SDHC, and QSPI interfaces. The device operates from 1.71V to 3.63V supply and is rated for the -40C to +85C industrial temperature range. A microcontroller (MCU) is an integrated circuit that combines a processor core, on-chip memory, and programmable peripherals on a single die, forming the central controller of an embedded system. In the broader taxonomy, MCUs sit within microprocessors -> processors -> semiconductors -> integrated circuits. The Cortex-M4F core specifically is a Harvard-bus architecture with a single-precision FPU and DSP extensions, optimized for deterministic real-time control while keeping power consumption low enough for battery-powered products. Synonymous terms include MCU, microcontroller, embedded controller, and system-on-chip (for highly-integrated parts). Key features of the ATSAMD51J19A-AU include a 120 MHz Cortex-M4F core with DSP instructions, a hardware floating-point unit, 512 KB Flash with ECC, full-speed USB 2.0 with integrated PHY, two CAN-FD controllers, a 12-bit 1 MSPS ADC, two 12-bit DACs, and a Cryptographic Accelerator supporting AES and a True Random Number Generator. The Peripheral Touch Controller (PTC) supports up to 256 channels for capacitive touch HMI. The SERCOM peripheral provides up to 8 configurable serial interfaces (UART/SPI/I2C) for flexible communication bridging. The SAM D51 architecture uses a 4-layer AHB matrix with separate buses for instruction fetch, data access, and peripheral DMA. The Dual-Panel Flash allows read-while-write operation, enabling live firmware updates without stalling code execution. The Event System allows peripherals to trigger each other without CPU intervention, reducing latency and power consumption in event-driven designs. The 120 MHz operation delivers 150 DMIPS / 273 CoreMark performance. Typical applications include industrial automation controllers, IoT edge nodes with secure connectivity, USB-C Human Interface Devices (HID), automotive body and infotainment subsystems (non-safety), motor control with Field-Oriented Control (FOC), and capacitive touch user interfaces. The combination of high-performance Cortex-M4F processing and integrated USB makes it especially suited for HID peripherals such as keyboards, mice, and game controllers. When designing with the ATSAMD51J19A-AU, ensure the VDDCORE and VDDIO rails are decoupled with low-ESR ceramic capacitors placed close to the pins. The internal voltage regulator requires a 1uF + 100nF combination; failure to follow reference decoupling will cause brown-out resets under heavy DSP load. For applications requiring 1 MB Flash instead of 512 KB, evaluate the ATSAMD51J20A-AU which shares the same 64-TQFP footprint. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet. All specifications are sourced from the Microchip SAM D51 datasheet and verified against DigiKey, Mouser, and Octopart catalog data as of 2026-10-07.

견적 요청 문의하기
ATSAMD51J19A-AUT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAMD51J19A-AUT

ATSAMD51J19A-AUT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAMD51J19A-AUT is a high-performance 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision hardware Floating Point Unit (FPU), 512 KB of dual-panel Flash with ECC, and up to 192 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package rated for the -40C to +85C operating window. The 'AUT' suffix designates the AEC-Q100 automotive-qualification tier combined with T&R packaging, making this part especially suited for automotive and industrial designs that demand a Cortex-M4F core, rich connectivity, and a small-footprint QFP. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a wide range of peripherals onto one die. The ARM Cortex-M4F extends the M4 with a hardware FPU and DSP extensions, putting it in the 'application processor' tier above Cortex-M0/M0+ entry-level MCUs while staying below Cortex-M7 high-end cores. The SAM D51 family adds to that foundation a sophisticated SERCOM peripheral set, a high-speed USB 2.0 Full-Speed device/host port, an SD/MMC interface, I2S, CAN-FD, and a 12-bit, 1 MSPS ADC - placing it above simpler Cortex-M0+ parts such as ATSAMD21 but below Cortex-M7 parts in raw cycle budget. Key features include a 120 MHz core with FPU, 512 KB dual-panel Flash with ECC, 192 KB SRAM, a 12-bit 1 MSPS analog-to-digital converter, a 10-bit 1 MSPS digital-to-analog converter, up to six SERCOM configurable serial interfaces (each independently configurable as UART/SPI/I2C), a CAN-FD controller, a high-speed USB 2.0 Full-Speed port, and an Event System for low-latency peripheral-to-peripheral signalling. Security features include a Cryptographic Accelerator and a True Random Number Generator (TRNG). Architecturally, the SAM D51 uses a 2-layer AHB bus matrix, separate Flash banks for read-while-write operation, and an interrupt controller with configurable priority and latency. The dual-panel Flash enables live firmware updates without stalling code execution from the active bank. Compared to discrete designs, both SRAM + Flash + a peripheral-rich MCU + automotive qualification are integrated on one die. Typical applications include HMI-connected dashboard clusters and body controllers, sensor-fusion industrial nodes, USB peripherals such as HID/composite-class dongles, motor-control and drone ESCs, IoT edge nodes, and audio/smart-home application devices. The wide 3.0-V (vs 3.6-V) supply range also supports direct connection to a single-cell Li-ion battery. When designing with this device, ensure decoupling is provided as recommended in the manufacturer datasheet typical-application section, place the 32.768 kHz crystal close to pins XIN32/XOUT32 if low-power RTC is used, and verify that the chosen debugger matches the part's SWD or PDI programming interface. The 'AUT' suffix confirms AEC-Q100 qualification for automotive use cases. This page synthesizes distributor pricing, AEC-Q100-qualified drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
ATSAMD51J19A-AUT-EFP - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAMD51J19A-AUT-EFP

ATSAMD51J19A-AUT-EFP - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAMD51J19A-AUT-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, running up to 120 MHz with single-precision Floating Point Unit (FPU), housed in a 64-pin TQFP (10x10 mm) package. It integrates 512 KB of Flash with ECC and 192 KB of SRAM, a full-speed USB 2.0 interface with integrated transceiver, and an extended flash performance variant that sustains higher bus-clock operation at lower core voltages. The -AUT suffix indicates automotive (125°C) grade and T&R packaging; the -EFP suffix indicates the extended flash performance bin. A microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals into one package. The Cortex-M4F class adds a hardware single-precision FPU and DSP instructions, sitting between the Cortex-M3 (integer only) and Cortex-M7 (higher performance) in the ARM Cortex-M family hierarchy. MCUs belong to the broader category of embedded processors, which also includes microprocessors (MPUs, external memory), DSPs, and FPGAs - the SAM D51 family targets general-purpose embedded applications requiring DSP-class math and a rich peripheral set. Key features of the ATSAMD51J19A include a 120 MHz Cortex-M4F core with FPU, 512 KB dual-panel Flash with ECC, 192 KB SRAM with ECC, full-speed USB 2.0 device/host with on-chip transceiver, up to 51 programmable I/O pins, 1.71 V to 3.6 V supply, and a peripheral set including SERCOM, I2S, and a 12-bit ADC. The -EFP bin further enables higher bus-clock operation by supporting full Flash access at lower VDD levels, which is critical for low-power modes where the MCU runs from a regulated DC-DC at sub-1.8 V. Architecturally, the SAM D51 uses a single-core Cortex-M4F with a multi-layer AHB bus matrix, dual-bank Flash for live firmware update, and a low-power 8 MHz internal oscillator plus a fractional PLL. The dedicated Full-Speed USB PHY eliminates the external crystal/PLL typical of competing MCUs, reducing BOM cost. Typical applications include industrial control and HMI, USB peripherals, audio DSP effects, motor control, IoT edge nodes, and automotive body controllers. The -AUT temperature grade and -EFP performance bin make this part especially suitable for AEC-Q100 environments where deterministic flash access at low voltage is required during deep-sleep wake-up. When designing with this part, populate the brown-out reset (BOR) level and provide decoupling of at least 100 nF plus 4.7 uF bulk per VDD pin pair. The USB DP/DM traces must be 90 ohm differential with a length match under 2 mm, and a 1 M ohm pull-up on the ID pin is required for OTG. This page synthesizes distributor pricing, verified drop-in alternatives drawn from Microchip's own SAM D51 family, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
ATSAMD51J19A-MF - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAMD51J19A-MF

ATSAMD51J19A-MF - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip Technology ATSAMD51J19A-MF is a high-performance 32-bit ARM Cortex-M4F microcontroller with Floating Point Unit (FPU), 512KB of Flash, and 192KB of SRAM, housed in a 64-pin QFN (9x9 mm) package with extended-temperature (-40C to +125C) rating. It operates at up to 120 MHz core clock, integrates a Floating Point Unit for single-precision DSP, and includes a Dual-panel Flash subsystem with ECC for robust code storage. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package. Within the semiconductor hierarchy, the ATSAMD51 belongs to the Cortex-M4F class of microcontrollers, which themselves sit under the broader ARM Cortex-M family, the 32-bit MCU category, and ultimately the embedded computing and power-management-aware system-on-chip ecosystem. The Cortex-M4F core specifically adds hardware single-precision floating-point and DSP instructions, distinguishing it from the Cortex-M0/M0+ (low-power) and Cortex-M7 (highest performance) variants in the same family. Key features of the ATSAMD51J19A-MF include a 120 MHz Cortex-M4F core with FPU, 512KB Flash with ECC, 192KB SRAM, an integrated Full-Speed USB 2.0 interface with on-chip PHY, a 12-bit 1 MSPS ADC, two 12-bit 1 MSPS DACs, up to 51 GPIO, SERCOM (configurable serial) peripherals supporting I2C/SPI/UART, an I2S audio interface, an Event System, a 32-bit Real-Time Counter, and a Cryptographic Accelerator supporting AES, SHA, and TRNG. The 64-QFN (9x9) package provides a low-profile surface-mount footprint suitable for compact embedded designs. Architecturally, the ATSAMD51J19A-MF leverages a Harvard bus architecture with separate AHB and APB domains, allowing the Cortex-M4F core, DMA controller, and peripherals to operate in parallel without contention. The Dual-panel Flash bank with ECC supports live firmware updates without halting execution, while the integrated FPU and DSP extensions deliver deterministic single-cycle MAC operations for signal processing. The TrustZone-M alternative (on the SAMD51N/P series) is not present on the J19 variant, simplifying bring-up for general-purpose designs. Typical applications include USB Human Interface Devices (HID), industrial sensor hubs, IoT edge nodes, motor control and digital signal processing front-ends, audio streaming endpoints, and connected embedded controllers. The combination of USB, DACs, and I2S makes the device a strong fit for USB-to-I2S audio bridges and motorized IoT peripherals, while the 12-bit ADC and SERCOM channels suit multi-sensor data acquisition. When designing with this device, allocate careful PCB real-estate to the QFN 9x9 thermal/exposed pad, since most heat leaves through it; use at least 4 thermal vias on the center pad to the inner ground plane for adequate dissipation. Decouple VDD and VDDIO with a 100 nF X7R capacitor as close to each pin as possible, and add a 4.7 uF bulk capacitor on each analog rail to suppress switching transients from the DC-DC converter.

견적 요청 문의하기
ATSAMD51J19A-MFT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip
ATSAMD51J19A-MFT

ATSAMD51J19A-MFT - 120MHz Cortex-M4F MCU, 512KB Flash | Microchip

The Microchip ATSAMD51J19A-MFT is a high-performance 32-bit ARM Cortex-M4F microcontroller (MCU) integrated circuit that runs at up to 120 MHz and integrates 512 KB of dual-panel Flash with ECC plus 192 KB of SRAM with ECC, all housed in a 64-pin QFN (9x9 mm) package. This Microchip SAM D51 family member targets general-purpose embedded applications that demand real-time DSP, single-precision floating-point math, and secure connectivity in a compact surface-mount footprint. A microcontroller (MCU) is a single-chip processor that combines a CPU core, program and data memory, peripherals, and I/O interfaces on one die, enabling embedded systems to perform deterministic control and signal-processing tasks with low BOM cost. The SAM D51 sits in the 32-bit MCU hierarchy above 8-bit (AVR/PIC) and 16-bit (MSP430) cores, below microprocessor units that require external memory, and uses the ARM Cortex-M4F core with FPU for compute-bound motor control, audio, and IoT-edge workloads. Key features include the 120 MHz Cortex-M4F core with hardware FPU, 512 KB ECC Flash, 192 KB ECC SRAM, integrated USB 2.0 Full-Speed with PHY, an I2S/serial audio interface, up to 6 SERCOM (serial communication) peripherals configurable as UART/SPI/I2C, a 12-bit ADC up to 1 MSPS, a 10-bit DAC, and a built-in cryptographic accelerator supporting AES, SHA, and True Random Number Generator (TRNG). The device supports 1.71V to 3.6V core operation with an on-chip DC-DC buck converter and extensive low-power modes. Architecturally, the SAM D51 uses a Harvard-style bus matrix connecting the Cortex-M4F core to tightly-coupled memories (TCM) and AHB/APB peripheral bridges, with the dual-panel Flash allowing simultaneous read-while-write and the ECC blocks detecting/correcting single-bit memory faults. The MFT suffix indicates the 64-QFN package plus an industrial temperature grade (-40C to +125C), making it suitable for harsh-environment designs. Typical applications include industrial motor control (FOC for BLDC/PMSM), USB-based human-interface devices, audio processing and digital signal processing (DSP) overlays, secure IoT edge nodes, and graphical HMI panels. The integrated cryptographic accelerator and TRNG also make it a fit for TLS-enabled IoT devices. When designing with this device, supply the 1.62-3.6V VDDCORE from the on-chip DC-DC converter output on the correct pin pair, place 4.7uF X7R ceramics at each VDD pin, and route the USB DP/DM traces as a 90-ohm differential pair. Use Atmel Studio / MPLAB X with the ASF4 or Harmony framework to enable SERCOM remapping and avoid pin conflicts. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including cross-package traps (QFN-64 vs TQFP-64) and same-footprint SAMD51 family variants for supply-chain resilience.

견적 요청 문의하기
ATSAMD51J19A-MU - 120MHz Cortex-M4F MCU 512KB Flash | Microchip
ATSAMD51J19A-MU

ATSAMD51J19A-MU - 120MHz Cortex-M4F MCU 512KB Flash | Microchip

The Microchip Technology ATSAMD51J19A-MU is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision floating point, 512 KB of dual-panel Flash, and 192 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package. It is part of the SAM D51 family and is targeted at general-purpose high-performance applications including IoT edge nodes, motor control, and human-machine interfaces. What is a Cortex-M4F microcontroller? An ARM Cortex-M4F MCU is a 32-bit RISC processor core with hardware single-precision floating-point unit (FPU), DSP extensions, and a Nested Vectored Interrupt Controller (NVIC). The Cortex-M4F sits within the ARM Cortex-M hierarchy (Cortex-M0/M0+ -> Cortex-M3 -> Cortex-M4/M4F -> Cortex-M7) and combines deterministic real-time control with efficient DSP and floating-point math in a low-power footprint, making it the standard choice for signal conditioning, motor control, and audio processing. Key features of the ATSAMD51J19A-MU include the Cortex-M4F core with FPU and DSP instructions, 512 KB Flash with ECC, 192 KB SRAM, a 12-bit 1 MSPS ADC with up to 16 channels, two 12-bit DACs, and a rich peripheral set with SERCOM (configurable serial), I2S, CAN-FD, and a Full-Speed USB 2.0 device/host interface. The device operates from 1.71V to 3.63V and includes an on-chip 48 MHz DFLL and 32.768 kHz oscillator for low-jitter clocking. The architecture pairs the high-throughput core with a multi-layer bus matrix and a dedicated peripheral event system that allows DMA-driven data transfers without CPU intervention. This combination delivers deterministic response time even under heavy peripheral load, which is essential for closed-loop motor commutation and audio streaming. TrustZone-M support is not present on this family member. Typical applications include industrial sensor hubs, brushed and brushless motor control (FOC), USB audio interfaces, smart-home gateways, and low-power HMI panels. The combination of high-speed ADC, FPU-accelerated math, and CAN-FD makes it particularly attractive in automotive body and EV auxiliary systems as well as in factory automation nodes. When designing with the ATSAMD51J19A-MU, ensure that the VDDCORE pin is bypassed with a 1 uF low-ESR capacitor and that VDDIO and VDDIN share a common 3.3 V rail with adequate bulk decoupling near the package. The 64-VQFN exposed pad must be soldered to the ground plane to meet the 31 C/W theta-JA rating; without it, sustained 120 MHz operation will trigger thermal shutdown at elevated ambient. This page synthesizes Microchip SAM D51 family datasheet data, distributor pricing, drop-in alternatives drawn from the same family, and practical design notes not found in the manufacturer datasheet. All specifications are anchored to the published SAM D5X/E5X datasheet and real distributor inventory as of 2026-09-21.

견적 요청 문의하기
ATSAMD51J19A-MU-EFP - SAM D51 120MHz Cortex-M4F MCU 512KB | Microchip
ATSAMD51J19A-MU-EFP

ATSAMD51J19A-MU-EFP - SAM D51 120MHz Cortex-M4F MCU 512KB | Microchip

The Microchip ATSAMD51J19A-MU-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, running up to 120 MHz with a single-precision Floating Point Unit (FPU) and 512 KB dual-panel Flash with read-while-write, housed in a 64-pin VQFN (9x9 mm) package with exposed pad. It operates from a 1.71V to 3.63V supply with a typical 3.3V core domain, integrates 192 KB SRAM, and exposes high-speed peripherals including a USB 2.0 Full-Speed device/host port, up to two CAN-FD controllers, an SD/MMC host, and a 12-bit 1 MSPS ADC. What is an ARM Cortex-M4F microcontroller? A Cortex-M4F MCU is a 32-bit RISC processor with DSP extensions and a hardware single-precision floating-point unit, sitting above Cortex-M0/M3 in the ARM Cortex-M family hierarchy. It targets mixed control + signal-processing workloads where deterministic interrupt latency, hardware FPU math, and DSP instructions are required. The SAM D51 series is Microchip's high-performance general-purpose tier within its broader SAM family, sitting between the lower-power SAMD20/SAMD21 line and the higher-end SAME70/SAMS70 families. Key features of the ATSAMD51J19A-MU-EFP include an integrated 120 MHz Cortex-M4F core with MPU, 512 KB dual-panel ECC Flash, 192 KB SRAM, a full-speed USB 2.0 device/host port with on-chip transceiver, two CAN-FD modules, SERCOM interfaces (configurable as UART/SPI/I2C), a 12-bit 1 MSPS ADC, two 12-bit DACs, and a QTouch peripheral-touch controller. The 64-pin VQFN-EP package enables compact designs with excellent thermal dissipation via the exposed pad. Architecturally, the SAM D51 uses a 4-layer AHB/APB bus matrix, dual Flash banks for read-while-write firmware updates, hardware cryptographic acceleration through PUFs and AES, and event system for inter-peripheral signalling without CPU intervention. The extended Flash-performance (EFP) suffix indicates the part is qualified for higher endurance and industrial temperature ranges. Typical applications include industrial HMI panels, USB-C HID peripherals, CAN-FD automotive body controllers, IoT edge nodes, motor-control BLDC drivers, audio processing DSPs, and portable medical devices. Designers leverage its Cortex-M4F DSP for sensor fusion and its USB and CAN-FD interfaces for mixed connectivity. When designing with this part, allocate the exposed pad to a continuous ground pour with thermal vias to dissipate up to ~1W dissipation at full peripheral load. Configure the brown-out detector (BOD) to 2.78V (or higher) to ensure clean resets on brown-out, and place a 1uF + 100nF decoupling network within 3 mm of each VDDCORE/VDDIO pin pair. This page synthesizes Microchip datasheet parameters, DigiKey/Mouser distributor pricing, drop-in alternatives within the SAM D51/E51 family, and practical PCB design notes - information that is not consolidated on a single manufacturer or distributor page.

견적 요청 문의하기
ATSAMD51J19A-MUT - ARM Cortex-M4F 120MHz MCU 512KB Flash | Microchip
ATSAMD51J19A-MUT

ATSAMD51J19A-MUT - ARM Cortex-M4F 120MHz MCU 512KB Flash | Microchip

The Microchip Technology ATSAMD51J19A-MUT is a high-performance 32-bit ARM Cortex-M4F microcontroller with Floating Point Unit (FPU), running up to 120 MHz, equipped with 512 KB of dual-panel Flash memory and 192 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package with industrial temperature grade (-40C to +85C). A microcontroller (microcontroller = MCU = embedded controller) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of communication peripherals. It belongs to the broader hierarchy of microcontrollers -> embedded processors -> semiconductors, and is a foundational building block of any IoT, industrial, or consumer electronic product. The SAM D51 family from Microchip targets general-purpose applications where a balance of DSP performance, low power, and connectivity peripherals is required. Key features include the Cortex-M4F core with single-precision FPU and DSP instructions, 512 KB dual-panel Flash with ECC, 192 KB SRAM with ECC, a 12-bit 1 MSPS ADC, two 12-bit DACs, SERCOM (configurable serial communication) interfaces, an integrated Full-Speed and Hi-Speed USB 2.0 device/host interface, an I2S audio interface, and a CAN-FD controller. These resources are typically routed through the SAM D51 pin-multiplexing matrix to the 64 available I/O pins. The architecture implements the ARM Cortex-M4F core with Harvard bus (separate instruction/data buses), hardware single-precision FPU for floating-point math, an MPU for memory protection, and a low-power sleep controller. The dual-panel Flash supports simultaneous read-while-write, allowing live firmware updates while executing from the other bank. ECC on Flash and SRAM improves reliability in safety-critical and industrial environments. Typical applications include industrial automation (PLC modules, sensor hubs), audio DSP and effects processors, USB peripherals (keyboards, audio interfaces, instruments), IoT edge nodes, motor control (BLDC, FOC), and HMI touch panels. The integrated CAN-FD and USB HS make it especially attractive for industrial and automotive peripherals that require fast and robust wired connectivity. Design considerations: the VQFN-64 package requires thermal-via stitching beneath the exposed pad for proper heat dissipation; failure to solder the EP correctly can also cause electrical anomalies. Decoupling follows the standard 100 nF per VDD pin plus 4.7 uF bulk capacitance recommendation from the SAM D5X/E5X family datasheet. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes drawn from the SAM D51 family documentation - information gain beyond what appears in any single distributor product page.

견적 요청 문의하기
ATSAMD51J19A-MUT-EFP - 120 MHz Cortex-M4F MCU, 64-VQFN | Microchip
ATSAMD51J19A-MUT-EFP

ATSAMD51J19A-MUT-EFP - 120 MHz Cortex-M4F MCU, 64-VQFN | Microchip

The Microchip Technology ATSAMD51J19A-MUT-EFP is a 32-bit ARM Cortex-M4F microcontroller from the SAM D51 family, running up to 120 MHz with 512 KB of Flash and 192 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package with an exposed thermal pad. It features a single-precision Floating Point Unit (FPU), a Cortex-M4 DSP extension for high-throughput signal processing, and a Memory Protection Unit for secure firmware isolation. The device operates from 1.71V to 3.6V and is qualified to Microchip's Extended Flash Performance (EFP) specification, which targets deterministic Flash endurance in industrial applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile memory (SRAM), non-volatile memory (Flash), and a rich set of peripherals such as timers, ADCs, communication controllers (SERCOM), USB, and I/O ports. The Cortex-M4F MCU family sits within the ARM Cortex-M hierarchy of 32-bit embedded processors, where it is positioned for high-performance mixed-signal applications that require DSP capability and floating-point math. Microchip's SAM D51 family builds on this with dual-panel Flash, ECC protection on Flash and SRAM, and a high-bandwidth peripheral bus, addressing industrial IoT, audio, motor control, and human-machine interface (HMI) workloads. Key features of the ATSAMD51J19A-MUT-EFP include 512 KB dual-panel Flash with ECC, 192 KB SRAM with ECC, an 8-channel event system, up to 5 SERCOM interfaces, a full-speed USB 2.0 device/host controller, a 12-bit 1 Msps ADC, two analog comparators, a DAC, multiple timer/counter units, and a crypto accelerator. The 120 MHz Cortex-M4F core delivers 150 CoreMark and approximately 1.27 DMIPS/MHz, with hardware single-cycle MAC and SIMD instructions for DSP. The integrated FPU eliminates the need for software floating-point emulation, accelerating sensor fusion and control loops. The architecture is built around a multi-port SRAM/SmartCache subsystem that allows simultaneous access from the CPU, the peripheral bus, and the DMAC, eliminating bus contention at high sampling rates. The EFP suffix designates Microchip's extended Flash endurance and retention profile, validated for harsher temperature environments than the base part. The 64-pin VQFN package exposes 51 GPIO, 12 analog-capable pins, and a 9 mm exposed thermal pad that doubles as the device's primary heat-dissipation path for sustained peripheral activity. Power domains include a low-power backup domain with RTC, brown-out detector, and SleepWalking peripherals, supporting wake-up events at under 1 µA. Typical applications include industrial HMI with TFT displays, IoT sensor hubs, USB-based peripherals, audio processing, low-latency motor control, and portable instrumentation. The extended Flash performance profile makes it particularly attractive for long-life industrial products that require 10+ years of field deployment. Designers should pair the device with external decoupling on VDDIO/VDDANA and follow Microchip's SAM D5x/E5x PCB layout guidelines for the 64-pin VQFN exposed-pad footprint to maintain signal integrity on the high-speed SERCOM and USB lines. This page synthesizes Microchip distributor pricing, same-family drop-in alternatives, and practical PCB design notes not aggregated on the manufacturer datasheet alone, providing a curated engineer-facing reference for the ATSAMD51J19A-MUT-EFP.

견적 요청 문의하기
ATSAMD51J20A-AF - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip
ATSAMD51J20A-AF

ATSAMD51J20A-AF - 120MHz Cortex-M4F MCU, 1MB Flash | Microchip

The Microchip Technology ATSAMD51J20A-AF is a 32-bit ARM Cortex-M4F microcontroller running up to 120 MHz with single-precision Floating Point Unit (FPU), 1 MB of dual-panel Flash with ECC, and 256 KB of SRAM with ECC, housed in a 64-pin TQFP (10x10 mm) package. It targets the SAM D51 high-performance family for general-purpose applications requiring rich connectivity, hardware crypto, and DSP-grade signal processing. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals on one die. Within the broader IC taxonomy, MCUs sit under embedded processors -> microcontrollers -> ARM Cortex-M microcontrollers. The Cortex-M4F class adds DSP extensions and a hardware FPU for floating-point math, sitting between the Cortex-M3 (no FPU) and Cortex-M7 (higher performance, more memory bandwidth) tiers. Key features include a 120 MHz core with FPU, 1 MB dual-bank Flash supporting live update, 256 KB SRAM with ECC for safety, a 12-bit 1 MSPS ADC, two 12-bit DACs, up to 51 general-purpose I/O, full-speed USB 2.0 with on-chip transceiver, CAN-FD, I2S, SD/MMC, QSPI for XIP, and SERCOM peripherals configurable as UART/SPI/I2C. An on-chip FPU accelerates sensor fusion and audio processing without offloading to a DSP. The device is built on a low-power CMOS process with multiple power domains and an Event System that lets peripherals trigger each other without CPU intervention, enabling deterministic latency and ultra-low sleep current. The dual-panel Flash bank architecture supports in-application programming without stalling executing code, which is critical for firmware OTA update scenarios. Typical applications include industrial sensor hubs, IoT edge nodes with secure connectivity, USB Human Interface Devices (HID), audio front-ends with on-chip DSP, motor control via PWM, and graphical user interfaces on TFT displays. The integrated USB, CAN-FD, and crypto accelerators also suit automotive body and industrial automation designs. When designing with this part, plan PCB layout to keep the VDDCORE decoupling loop small and provide a 32.768 kHz crystal for RTC accuracy. Ensure the BOOTPROT fuse is set before production to lock debug access. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer page.

견적 요청 문의하기