마이크로컨트롤러

제품 (19360)

XMC4108Q48K64BAXUMA1 - 80MHz Cortex-M4 64KB MCU | Infineon
XMC4108Q48K64BAXUMA1

XMC4108Q48K64BAXUMA1 - 80MHz Cortex-M4 64KB MCU | Infineon

The Infineon Technologies XMC4108Q48K64BAXUMA1 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 industrial MCU family, operating at 80 MHz with 64 KB of embedded flash and 20 KB of SRAM in a 48-pin PG-VQFN package. It is designed for embedded industrial control systems requiring deterministic real-time performance, compact packaging, and integrated microcontroller resources. The verified distributor listing identifies the device as a 32-bit XMC4000-series MCU with 64 KB flash, an 80 MHz Cortex-M4 core, and a 3.3 V supply. The XMC4000 family belongs to the industrial microcontroller hierarchy: MCU, embedded microcontroller, 32-bit microcontroller, Arm Cortex-M4 microcontroller, and industrial control processor. Compared with general-purpose entry microcontrollers, the XMC4108 family is oriented toward connected industrial equipment, sensors, actuators, communication modules, and control platforms where predictable execution and a compact surface-mount footprint are important. Key verified features include an Arm Cortex-M4 processor core operating at 80 MHz, 64 KB of flash memory organized as 64K x 8, and 20 KB of SRAM. The official Infineon product-page snippet specifies an industrial temperature range of -40 °C to 125 °C. The device is supplied in a 48-pin PG-VQFN package with an exposed pad according to distributor data, making it suitable for compact PCB designs requiring high-density placement and improved thermal spreading. The XMC4108Q48K64BAXUMA1 is appropriate for industrial automation, motor and motion control, communications equipment, building automation, sensor hubs, and embedded control systems. Its 80 MHz Cortex-M4 performance supports interrupt-driven control, digital signal processing, and communication protocol handling while retaining a unified memory architecture and low component count. The 64 KB flash capacity is suitable for firmware, configuration data, and application code, while the 20 KB SRAM supports working memory, stack, buffers, and peripheral data structures. Designers should verify the exact pin assignment, exposed-pad connection, decoupling requirements, clock configuration, and peripheral mix against the manufacturer datasheet before layout release. The verified data confirms the core, memory size, frequency, package family, supply indication, and industrial temperature range, but it does not provide a complete electrical table or detailed pinout. This product page therefore distinguishes verified attributes from parameters requiring confirmation from the XMC4100/4200 series documentation.

견적 요청 문의하기
XMC4200F64F256BAXQMA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4200F64F256BAXQMA1

XMC4200F64F256BAXQMA1 - 80MHz Cortex-M4 MCU | Infineon

The Infineon Technologies XMC4200F64F256BAXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with an operating frequency of up to 80 MHz, 256 KB of flash memory, and 40 KB of SRAM in a 64-pin LQFP package with an exposed pad. It belongs to the XMC4000 family and combines deterministic embedded processing with industrial-oriented integration. The device operates from a 3.3 V supply according to the available distributor specifications. An ARM Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded control. Within the product hierarchy, a microcontroller integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, interrupt control, and communication interfaces on one semiconductor device. The XMC4200 therefore serves as a complete embedded platform rather than a standalone processor, making it suitable for industrial equipment, sensors, actuator controllers, and connected automation systems. The principal verified specifications include an 80 MHz maximum clock, 256 KB flash organized as 256K x 8, and 40 KB SRAM. The program-memory capacity is suitable for moderate embedded applications, while the SRAM supports working state, data acquisition, communication buffers, and peripheral control. Availability through DigiKey and Mouser indicates that the exact ordering code is commercially obtainable, although distributor stock remains subject to change. Technical differentiation within the XMC4000 family is determined by the selected die and ordering designation. The manufacturer identifies the XMC4200-F64F256-BA as an industrial ARM Cortex-M4 microcontroller with 256 KB flash, 40 KB SRAM, and operation up to 80 MHz. The AXQMA1 ordering suffix further distinguishes the supplied package and delivery configuration from other XMC4200 variants. Firmware developers should therefore treat the ordering code, not only the abbreviated XMC4200 family name, as the controlling device identity during PCB and BOM qualification. Typical uses include distributed industrial control, machine-control modules, sensor and actuator interfaces, communications equipment, and embedded automation nodes. An 80 MHz Cortex-M4 core can execute control logic concurrently with interrupt-driven peripheral service, while 256 KB of flash supports application firmware and 40 KB of SRAM can accommodate protocol stacks and runtime data. Exact peripheral availability, pin multiplexing, and electrical limits must be confirmed in the manufacturer data sheet before assigning signals to the 64-pin package. PCB design should preserve the exposed-pad land pattern specified for the LQFP-64 package, connect the exposed pad to the appropriate ground plane, and route high-speed or sensitive signals away from noisy switching nodes. Firmware bring-up should include appropriate clock, reset, and peripheral initialization procedures from the data sheet. Because the supplied search extracts do not provide the complete pin table, pin names, absolute maximum ratings, or detailed timing characteristics, those values should not be inferred from the family name. This product record combines manufacturer and distributor information, package and memory details, commercially sourced ordering information, and an explicit assessment of drop-in alternatives. It also distinguishes verified pin-compatible same-brand options from broader functional equivalents that cannot replace this device without PCB redesign, firmware adaptation, and qualification.

견적 요청 문의하기
XMC4200Q48K256BAXUMA1 - 80MHz Cortex-M4 MCU | Infineon
XMC4200Q48K256BAXUMA1

XMC4200Q48K256BAXUMA1 - 80MHz Cortex-M4 MCU | Infineon

The Infineon XMC4200Q48K256BAXUMA1 is an industrial 32-bit ARM Cortex-M4 microcontroller operating up to 80 MHz, with 256 KB of flash memory, 40 KB of SRAM, CAN and LIN networking, and a 48-pin VQFN package with an exposed pad. It combines a hardware floating-point unit and high-resolution PWM timers with mixed-signal acquisition capabilities for motor-drive, motion-control, and industrial communication systems. An industrial microcontroller is a semiconductor device designed to execute real-time control, monitoring, and communication tasks in demanding embedded systems. The XMC4000 family belongs to the ARM Cortex-M4 microcontroller class, combining processor performance, embedded nonvolatile memory, RAM, communication peripherals, timers, and analog interfaces. This integration places the XMC4200 within the broader hierarchy of embedded processor, microcontroller, and industrial automation semiconductor categories. Principal features include an 80 MHz ARM Cortex-M4 core, 256 KB flash, 40 KB SRAM, hardware floating-point capability, dual CAN/LIN-oriented networking support, and high-resolution PWM timers. The 256 KB flash capacity provides room for application code, configuration data, and firmware updates, while the 40 KB SRAM supports real-time control state, communication buffers, and mixed-signal processing. The industrial temperature range extends from -40°C to 125°C. The target device is based on the Infineon XMC4200-Q48K256-BA, whose ordering information identifies 256 KB flash, 40 KB SRAM, and industrial-grade temperature operation. Distributor records describe the programmable part as a 48-lead PG-VQFN-53 package with an exposed thermal pad. Its CAN, LIN, timer/PWM, and mixed-signal resources support designs requiring deterministic control and networked fieldbus communication without relying solely on a general-purpose processor. Typical applications include servo and motor controllers, industrial CAN and LIN nodes, factory automation equipment, industrial sensor hubs, motion-control platforms, and mixed-signal monitoring systems. In each case, the MCU consolidates real-time processing and communication while reducing the number of discrete interface components required on the board. Designers should verify every peripheral assignment, pin multiplexing option, and exposed-pad connection against the manufacturer datasheet before layout release. Input and output signal integrity, CAN and LIN termination, clock configuration, decoupling, and thermal management are especially important in electrically noisy industrial environments. Firmware should also include watchdog, fault-state, and brownout recovery behavior appropriate to the target system. This page combines verified manufacturer and distributor specifications, commercial availability information, a strict drop-in assessment, and application-oriented design guidance. It distinguishes documented values from missing technical data so engineers can make sourcing and design decisions without mistaking unsupported assumptions for manufacturer specifications.

견적 요청 문의하기
XMC4300-F100F256 - 144MHz Cortex-M4 MCU 256KB Flash | Infineon
XMC4300-F100F256

XMC4300-F100F256 - 144MHz Cortex-M4 MCU 256KB Flash | Infineon

The Infineon XMC4300-F100F256 AA is a 32-bit ARM Cortex-M4 industrial microcontroller in a 100-pin LQFP package, featuring 256 KB of on-chip flash memory, 128 KB SRAM, and an integrated Ethernet MAC that natively supports EtherCAT slave operation. It is part of the XMC4000 family, which combines the Cortex-M4 core with DSP instructions and a single-precision FPU, plus Infineon's deterministic peripheral set designed for real-time industrial control. Background: An ARM Cortex-M4 microcontroller is a 32-bit MCU based on the ARMv7-M architecture that integrates a Thumb-2 instruction set, optional single-precision floating-point unit, and DSP extensions. Within the broader taxonomy, this places the XMC4300 as: microcontroller -> 32-bit MCU -> ARM Cortex-M4 MCU -> industrial-grade MCU -> real-time control MCU -> semiconductor. The XMC4000 family extends this with Infineon's peripheral subsystem for motor control, power conversion, and fieldbus communication. Key features of the XMC4300-F100F256 include a 144 MHz core clock, 128 KB of integrated SRAM with parity, hardware EtherCAT slave controller (ECAT), USB 2.0 full-speed OTG, up to four USIC channels for flexible serial communication (UART, SPI, I2C, I2S), two CAN nodes, and a 12-bit multi-channel ADC. The PG-LQFP-100-25 package with exposed pad supports an extended industrial temperature range of -40C to +85C. The on-chip EtherCAT Slave Controller (ESC) is the differentiating feature, enabling sub-millisecond cycle times without an external ASIC. At the architecture level, the XMC4300 uses an M-DSP/M-FPU Cortex-M4 core from ARM, paired with Infineon's proprietary peripheral interconnect and a hierarchical bus matrix that gives DMA-capable channels direct access to SRAM, peripherals, and the EtherCAT Dual Port RAM. The integrated EtherCAT Slave Controller offloads the EtherCAT state machine from the application CPU, leaving 144 MHz of compute available for the application layer. Typical use cases include EtherCAT slave IO modules, industrial sensor hubs, servo drive auxiliary controllers, PLC expansion modules, and building automation gateways. The XMC4300-F100F256 AA fits EtherCAT applications because the integrated ESC eliminates the need for an external ET1100 ASIC, reducing BOM cost and PCB area while still meeting EtherCAT conformance class compliance. Design consideration: the PG-LQFP-100-25 exposed-pad variant must be soldered to a sufficient copper pad on the PCB to dissipate up to ~1 W of internal dissipation; missing or weak thermal pad soldering can lead to thermal shutdown under sustained EtherCAT and CPU load. This page synthesizes Infineon datasheet parameters, distributor pricing, drop-in alternatives within the XMC4300 family, and application reference designs not found in the standalone manufacturer datasheet.

견적 요청 문의하기
XMC4400F64F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64F256BAXQMA1

XMC4400F64F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F64F256BAXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with a 120 MHz operating frequency, 256 KB of embedded Flash memory, and a 100-pin PG-LQFP surface-mount package. It belongs to the XMC4000 microcontroller family and combines a high-resolution PWM unit, analog and digital peripherals, and Ethernet MAC capability in one industrial control device. The orderable designation indicates an industrial temperature option and 256 KB Flash configuration. An industrial microcontroller is a semiconductor device designed to execute embedded control software under real-time operating conditions. The XMC4400 follows the hierarchy of microcontroller, embedded processor, and industrial semiconductor. Its ARM Cortex-M4 processing architecture provides a 32-bit execution environment for motor control, communications, industrial automation, and connected equipment. Unlike a general-purpose desktop processor, it is intended for deterministic control of sensors, actuators, communication links, and safety-oriented peripheral functions. The verified manufacturer information identifies an operating frequency of up to 120 MHz, 256 KB of Flash, and an Ethernet MAC as principal device attributes. The XMC4400 also incorporates Infineon's high-resolution PWM capability, whose published resolution reaches 150 ps. These features support applications that benefit from precise timing, fast control-loop execution, and deterministic peripheral interaction without requiring a separate high-resolution PWM device. Technical implementation uses the ARM Cortex-M4 core within the XMC4000 architecture and integrates memory, communications, timing, analog, and debugging resources into a single device. Flash provides 256 KB for firmware and application code, while SRAM requirements and other memory details remain dependent on the complete ordering designation and datasheet tables. The PG-LQFP-100 package is a 100-pin plastic surface-mount package suited to multilayer industrial control boards where a fine-pitch leaded package is preferred over a ball-grid array. Typical uses include industrial Ethernet equipment, motor and power conversion controllers, factory automation nodes, building automation interfaces, and embedded communication platforms. For networking products, the integrated Ethernet MAC reduces the need for external media-access control, although a suitable Ethernet PHY and magnetic interface are still required. For motor control, the high-resolution PWM unit supports precise edge placement and timing while the 120 MHz Cortex-M4 core handles supervisory control and communications tasks. Designers should preserve the pin assignments and power conditions defined for the PG-LQFP-100 ordering designation, use the manufacturer's recommended decoupling and clock configuration, and verify Ethernet transceiver requirements before layout. Software validation should include clock-tree, reset, startup, and peripheral-instance verification. PCB thermal and signal-integrity reviews are essential when high-speed communication, switching outputs, or adjacent sensitive analog circuitry share the board. This product record consolidates verified manufacturer and distributor information, pin-package identification, pricing status, application guidance, and transparent engineering comparisons. It also distinguishes verified facts from parameters that require confirmation in the complete manufacturer datasheet, helping engineers accelerate sourcing without presenting unverified electrical limits as design guarantees.

견적 요청 문의하기
XMC4400F64F512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64F512BAXQMA1

XMC4400F64F512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F64F512BAXQMA1 is a 32-bit ARM Cortex-M4 microcontroller rated at 120 MHz, with 512 KB of flash memory and a 64-pin TQFP exposed-pad package. It is a 3.3 V industrial member of the XMC4000 family that combines a floating-point and DSP-capable processor core with Ethernet MAC, CAN, high-resolution PWM, and other industrial peripherals. An MCU is a programmable semiconductor that integrates a CPU core, memory, and peripherals on one die. The ARM Cortex-M4 is a 32-bit processor architecture within the broader microcontroller and embedded-semiconductor hierarchy. It supports real-time control tasks that require deterministic peripheral access, while the XMC family adds Ethernet and CAN connectivity commonly used in industrial automation, networking, motor-control, and communications equipment. Key verified features include a 120 MHz operating frequency, 512 KB of flash, and a 64-pin PG-TQFP-64-19 surface-mount package. The device also includes a 150 ps high-resolution PWM capability, an Ethernet MAC, CAN interfaces, an FPU, DSP instructions, and a common-ground architecture. In packages with an exposed die pad, Infineon requires the pad to be connected to the common ground alongside the VSS, VSSA, and VSSO pins. The Cortex-M4 architecture is suitable for floating-point control algorithms and fixed-point signal processing, while the XMC peripheral set reduces the need for external interface devices. Ethernet MAC support can simplify industrial Ethernet connectivity, and CAN provides a robust option for distributed automation and vehicle or industrial control networks. The high-resolution PWM unit is especially relevant to precise timing, digital-to-analog conversion, and motor-control applications. Typical uses include industrial Ethernet controllers, factory automation nodes, CAN-connected motor systems, power-conversion equipment, and embedded communications platforms. At 120 MHz, the MCU has sufficient processing capacity for protocol handling and real-time control, but designers should evaluate interrupt latency, peripheral timing, memory bandwidth, and thermal conditions for each system. The exposed pad requires careful PCB layout and an adequate ground plane. The package must be soldered according to Infineon's land-pattern and reflow guidance, while the exposed die pad and all ground pins must be tied to the common ground. The 150 ps PWM resolution should also be checked against the timer clock and required output timing rather than treated as a universal system timing guarantee. This page consolidates verified distributor and manufacturer information, package characteristics, functional applications, and cross-reference candidates. The available data identifies only a limited number of same-package alternatives; their temperature-grade, ordering-code, and detailed electrical differences should be confirmed against the Infineon ordering information before production substitution.

견적 요청 문의하기
XMC4400F64K512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4400F64K512BAXQMA1

XMC4400F64K512BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4400F64K512BAXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of flash memory, 80 KB of RAM, and an Ethernet MAC, all housed in a 64-pin LQFP package. The XMC4400 combines a high-performance microcontroller core with advanced motor-control peripherals, including a high-resolution PWM unit capable of 150 ps resolution. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor in the microcontroller family, where the Arm Cortex-M core sits between a general-purpose microprocessor and a highly integrated embedded control device. The XMC4400 belongs to Infineon's XMC4000 industrial microcontroller family, combining real-time digital control with communication and analog-adjacent peripheral functions on one integrated circuit. Key device features include a 120 MHz Cortex-M4 core, 512 KB of program flash, 80 KB of RAM, an integrated Ethernet MAC, and a 64-pin PG-LQFP package. The 150 ps high-resolution PWM capability supports precision timing in motor-control and power-conversion systems. The combination of Ethernet connectivity and deterministic control peripherals makes the device suitable for industrial automation, networking, and embedded motor-control designs. Technically, the XMC4400 integrates an ARM Cortex-M4 processor with Infineon's peripheral set. Its high-resolution PWM and advanced timer architecture are intended to reduce the need for external timing and signal-generation components. The Ethernet MAC supports network-oriented industrial equipment, while the flash and RAM capacities provide sufficient space for control firmware, communication stacks, and application logic. Typical applications include industrial Ethernet controllers, servo and motor drives, programmable logic controllers, industrial communication modules, and embedded automation equipment. The 120 MHz processing rate supports responsive control loops, while the Ethernet MAC provides a path to connected factory networks. System designers must still verify peripheral assignments, package dimensions, pin multiplexing, and operating limits against the complete manufacturer datasheet before schematic release. A primary design consideration is firmware and peripheral planning. Because the LQFP-64 package exposes a finite number of pins, pin multiplexing, analog functions, debug access, clock configuration, and Ethernet connectivity must be assigned early. PCB designers should also follow the manufacturer's recommended decoupling, exposed-pad, and high-speed layout guidance before a new board is fabricated. This product data combines the verified manufacturer and distributor information with practical comparison notes and engineering guidance that are not presented as a substitute for the complete Infineon XMC4400 datasheet. Exact electrical characteristics, pricing, lead time, lifecycle status, and package details should be confirmed against the latest manufacturer documentation and distributor records.

견적 요청 문의하기
XMC4402F64F256ABXQMA1 - 120MHz Cortex-M4 256KB Flash MCU
XMC4402F64F256ABXQMA1

XMC4402F64F256ABXQMA1 - 120MHz Cortex-M4 256KB Flash MCU

The Infineon XMC4402F64F256ABXQMA1 is a 32-bit single-core ARM Cortex-M4 microcontroller operating at 120 MHz, with 256 kByte of flash memory, 80 kByte of SRAM, and 10/100 Ethernet connectivity in a 64-pin PG-LQFP-64-19 package with an exposed pad. It belongs to the Infineon XMC4000 series for industrial applications and combines real-time microcontroller control with an integrated Ethernet interface. A microcontroller is a programmable system-on-chip containing a CPU core, memory, peripherals, and communication interfaces. Within the product hierarchy, this device is an ARM Cortex-M4 microcontroller, an embedded processor, an integrated circuit, and ultimately a semiconductor. The XMC4000 family is designed for industrial control systems where deterministic execution, Ethernet connectivity, and a relatively large embedded memory footprint are more important than the power density of a small sensor node. Three headline characteristics define this part. The 120 MHz Cortex-M4 core provides 32-bit processing with integrated floating-point instruction support. The 256 kByte program flash supplies room for a bootloader, application firmware, and network configuration, while 80 kByte of SRAM supports working buffers, protocol stacks, and control data. The integrated 10/100 Ethernet interface allows the controller to participate directly in industrial Ethernet networks without a separate interface controller. The XMC4402F64F256ABXQMA1 is identified as an industrial-grade XMC4000-series member. Its PG-LQFP-64-19 mechanical format provides 64 leads plus a thermal exposed pad, offering a larger pin count than small-outline packages and practical access to mixed-signal, communications, and digital I/O resources. The verified distributor listing confirms single-core operation, 120 MHz clocking, 256 kByte flash, and 3.3 V supply information. Additional detailed timing, peripheral, and absolute-maximum parameters must be confirmed in the manufacturer datasheet before a new design is released. Typical applications include industrial Ethernet controllers, programmable logic controllers and automation equipment, networked motor and process controllers, industrial communication gateways, and embedded test systems. For Ethernet-connected control equipment, the combination of Cortex-M4 processing, 80 kByte SRAM, and integrated 10/100 Ethernet reduces the external component count compared with a discrete Ethernet-interface architecture. Engineers should still budget memory margin for the selected protocol stack and application firmware. The most important design consideration is thermal management around the exposed pad. The LQFP package requires a land pattern that connects the thermal pad to a properly sized ground or thermal copper plane; a datasheet-based thermal design should verify the junction and ambient temperature limits under the maximum operating clock and Ethernet activity. The 3.3 V operating point should also be checked against every attached peripheral, level-shifting interface, and supply tolerance. This page combines the verified Infineon and distributor specifications with practical selection guidance, pin-package details, application analysis, and same-package replacement information that is not normally consolidated on a distributor listing. It distinguishes documented facts from parameters that still require confirmation from the manufacturer datasheet, helping engineers evaluate the XMC4402F64F256ABXQMA1 efficiently without treating unverified generic MCU specifications as fact.

견적 요청 문의하기
XMC4402F64K256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4402F64K256BAXQMA1

XMC4402F64K256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4402F64K256BAXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with a 120 MHz core, 256 KB of flash memory, and a 64-pin LQFP package. The XMC4000-series device combines real-time control capability with an integrated 10/100 Ethernet MAC, high-resolution PWM, and an extended peripheral set for industrial automation, networking, motor-control, and embedded communications systems. A microcontroller is a compact semiconductor system that integrates a CPU core, program memory, data memory, peripherals, and communication interfaces on one package. The ARM Cortex-M4 architecture belongs to the microcontroller class and provides deterministic instruction execution, DSP-oriented instructions, and hardware floating-point support. The XMC4400 family extends this foundation with Infineon peripherals designed for industrial real-time control and connected equipment. The XMC4402F64K256BAXQMA1 operates at 120 MHz and provides 256 KB of flash organized as 256K x 8. Its high-resolution PWM unit offers a stated resolution of 150 ps, supporting precise timing-sensitive power conversion and motor-control systems. The integrated Ethernet MAC adds 10/100 communications capability without requiring a separate interface controller. The device is identified as an industrial-grade member of the XMC4400 family. The XMC4400 architecture integrates multiple peripheral domains suited to deterministic embedded control. Its communication and timing resources can support industrial Ethernet, while the high-resolution PWM and fast-control peripherals reduce reliance on software timing loops. The 256 KB embedded flash provides room for bootloader, application, and configuration code, while the Cortex-M4 processor supports efficient signal-processing and control workloads. Typical uses include industrial PLC peripheral modules, factory automation controllers, Ethernet-connected data acquisition equipment, variable-frequency motor drives, power-conversion controllers, building automation nodes, and real-time communication gateways. For designs requiring a deterministic Ethernet connection, the integrated 10/100 Ethernet MAC can be paired with a suitable Ethernet transceiver and magnetic interface. Designers should verify the complete pin-level electrical configuration, exposed-pad connection, clock requirements, memory organization, and peripheral multiplexing against the official Infineon documentation before layout release. The LQFP-64 land pattern must follow the manufacturer package drawing, and decoupling should be placed close to the supply pins. Firmware should also validate reset, clock, Ethernet PHY, and startup sequencing for the selected board design. This page combines verified manufacturer and distributor information with an honest engineering comparison, practical integration guidance, and clearly identified data gaps. It distinguishes confirmed XMC4400-family capabilities from unverified details so procurement and hardware teams can evaluate the MCU without relying on invented specifications or unsafe replacement assumptions.

견적 요청 문의하기
XMC4500-F144F1024AB - 120MHz Cortex-M4 MCU | Infineon
XMC4500-F144F1024AB

XMC4500-F144F1024AB - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500-F144F1024AB is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at 120 MHz with 1 MB of flash memory and 160 kByte of SRAM. The device is packaged in a 144-pin PG-LQFP-18 industrial package and is intended for connected industrial control, industrial Ethernet, power conversion, and sense-and-control systems. Its combination of Ethernet connectivity, configurable peripherals, and deterministic microcontroller processing supports compact embedded platforms that need communications and control in one device. An ARM Cortex-M4 microcontroller is a reduced-instruction-set processor-based embedded controller used for real-time control, communications, and signal-processing tasks. The XMC4000 family combines a standard ARM processor core with Infineon peripherals for industrial connectivity, control, and power-management designs. This makes the XMC4500 suitable when a system needs more than a basic GPIO controller, especially where Ethernet and deterministic control must share one microcontroller platform. The verified product information identifies a 120 MHz operating frequency, 1 MB flash, 160 kByte SRAM, Ethernet connectivity, and a 144-pin PG-LQFP-18 package. The family description also identifies configurable peripherals, allowing application-specific tailoring. The 1 MB flash provides room for networking stacks, control software, diagnostics, and application logic, while the 160 kByte SRAM supports working memory for protocol and control tasks. The XMC4500 is positioned for industrial communication and control applications where an Ethernet-capable MCU can reduce component count by integrating network communication with local control. The Cortex-M4 architecture provides a familiar embedded software ecosystem, while the family peripheral set is designed for industrial connectivity, power conversion, and sense-and-control use cases. Exact electrical limits, pin functions, timing values, and temperature limits require the Infineon XMC4500 datasheet. Typical applications include industrial Ethernet gateways, programmable automation controllers, motor and power-conversion control, industrial sensor nodes, and connected measurement equipment. For designs requiring deterministic response, the MCU can process local control loops while Ethernet handles supervisory communication, diagnostics, and configuration. The verified data does not provide a complete application-specific peripheral map for this exact orderable MPN, so firmware engineers should verify pin multiplexing and peripheral availability in the manufacturer datasheet before schematic capture. A key design consideration is package and firmware verification. The target is a 144-pin industrial package, so PCB land patterns, exposed-pad or thermal requirements, pin multiplexing, clock configuration, and power sequencing must be checked against the exact datasheet. This page synthesizes the verified manufacturer and distributor information, available cross-reference results, package identity, application context, and engineering guidance; missing orderable-specific data is explicitly marked rather than estimated. The Infineon XMC4500-F144F1024AB is a 120 MHz ARM Cortex-M4 industrial microcontroller with Ethernet, 1 MB flash, 160 kByte SRAM, and a 144-pin PG-LQFP-18 package.

견적 요청 문의하기
XMC4500F100F1024AC - 120MHz Cortex-M4 MCU 1024KB | Infineon
XMC4500F100F1024AC

XMC4500F100F1024AC - 120MHz Cortex-M4 MCU 1024KB | Infineon

The Infineon XMC4500F100F1024AC is a 32-bit industrial microcontroller from the XMC4000 family, integrating an ARM Cortex-M4 core with FPU running at 120 MHz, 1024 KB of embedded Flash, and 160 KB of RAM in a 100-pin LQFP package. It is engineered for energy-efficient industrial applications including digital power conversion, motor control, and industrial connectivity. An ARM Cortex-M4 microcontroller is a 32-bit processor core that combines high-performance digital signal processing (DSP) instructions with a single-precision floating-point unit (FPU), commonly deployed in industrial automation, motor control, and power-conversion systems. The XMC4000 family extends this core with Infineon's proprietary peripheral set, bridging the CPU to power-management compute, motor-control compute, and connectivity ICs in the broader industrial semiconductor taxonomy. Key features include a Cortex-M4 core with DSP/FPU at 120 MHz, 1024 KB Flash program memory, 160 KB SRAM, an integrated Ethernet MAC, USB 2.0 FS, six CAN nodes, six USIC channels configurable as UART/SPI/I2C, two 12-bit ADC units with up to 26 channels, a CCU6 timer unit for motor PWM, and a flexible peripheral interconnect (HRPWM). The LQFP-100 package is surface-mountable with standard 0.5 mm pitch. The XMC4500 architecture pairs the Cortex-M4 core with a multi-layer bus matrix and dedicated peripheral DMA channels, enabling deterministic real-time response for power-conversion and motor-control loops. Embedded Flash supports in-application programming, and the on-board temperature sensor and supply-voltage monitor enable functional-safety-aware firmware designs. Typical applications include industrial servo drives, solar inverters, switched-mode power supplies with digital control loops, field-oriented motor control (FOC), industrial PLC I/O modules, and EtherCAT/CANopen slave controllers. The combination of Cortex-M4 DSP capability and dedicated CCU6 PWM timers makes XMC4500 particularly well-suited to digital power conversion and three-phase motor control. When designing with this part, allocate adequate decoupling (100 nF + 4.7 µF per VDD/VSS pair) and ensure that the 25 MHz crystal oscillator or external clock source meets the data sheet jitter specification. The 1024 KB Flash is split into two banks, allowing concurrent read/execute and in-field firmware updates via the built-in bootstrap loader. This page consolidates Infineon datasheet specifications, distributor pricing and stock, drop-in compatible variants within the XMC4500 series, and practical design notes that are not aggregated in the standalone datasheet.

견적 요청 문의하기
XMC4500F100F768ACXQMA - 120MHz Cortex-M4 MCU | Infineon
XMC4500F100F768ACXQMA

XMC4500F100F768ACXQMA - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500F100F768ACXQMA is a 32-bit industrial ARM Cortex-M4 microcontroller operating at 120 MHz, with 768 kByte of embedded Flash and an Ethernet MAC, supplied in a 100-pin LQFP package with an exposed pad. The device is identified in distributor data as the 3.3 V, 100-pin LQFP version of Infineon's XMC4000 family and is intended for energy-efficient industrial applications. An industrial microcontroller is a semiconductor integrated circuit that combines a processor core, embedded nonvolatile memory, communication peripherals, timers, and I/O interfaces on one device. The XMC4500 belongs to the XMC4000 family and uses the ARM Cortex-M4 architecture, placing it in the hierarchy of 32-bit MCU, microcontroller, embedded processor, and semiconductor. Its configurable peripheral set allows an industrial control design to combine real-time processing with Ethernet-connected equipment. The verified device data identifies three principal performance points: a 120 MHz Cortex-M4 core, 768 kByte of Flash, and integrated Ethernet MAC support. The Cortex-M4 platform supports efficient control-oriented software, while the larger Flash capacity accommodates networking stacks, control algorithms, diagnostics, and application firmware. The Ethernet MAC makes the MCU suitable for connected industrial systems without requiring a separate network controller solely for Ethernet interface management. Infineon describes the XMC4500 as combining a leading-edge peripheral set with the industry-standard ARM Cortex-M4 core. This combination targets energy-efficient industrial equipment where deterministic embedded control, communications, and configurable peripherals must coexist in one package. Distributor records further identify the target as the industrial XMC4000 MCU in a PG-LQFP-100-11 configuration. Typical uses include industrial Ethernet controllers, connected factory equipment, industrial automation modules, embedded network bridges, and real-time supervisory controllers. In these systems, the 120 MHz processor can service communications and control tasks, while the 768 kByte Flash provides room for protocol stacks and firmware. The Ethernet MAC is especially relevant to machinery monitoring, networked sensors, and supervisory control equipment. Designers should verify the complete pin assignment, exposed-pad connection, decoupling requirements, clock configuration, and startup sequence against the Infineon XMC4500 datasheet before layout release. The verified snippets do not enumerate all 100 pin names, so this page does not infer individual pin functions. Board design should preserve the manufacturer's recommended land pattern and exposed-pad implementation rather than treating the package as a generic LQFP. This page combines verified manufacturer and distributor facts, same-family drop-in candidates, price information available on 2026-10-30, and practical qualification guidance. It also distinguishes confirmed specifications from data that must be obtained from the full manufacturer datasheet, helping engineers evaluate the XMC4500F100F768ACXQMA without relying on incomplete catalog descriptions.

견적 요청 문의하기
XMC4500F100K1024ACXQSA1 - ARM Cortex-M4 MCU, 120MHz, 1MB Flash | Infineon
XMC4500F100K1024ACXQSA1

XMC4500F100K1024ACXQSA1 - ARM Cortex-M4 MCU, 120MHz, 1MB Flash | Infineon

The Infineon XMC4500F100K1024ACXQSA1 is an industrial ARM Cortex-M4 microcontroller in the XMC4000 family, delivering 120 MHz core performance with 1024 KB on-chip Flash and 160 KB SRAM in a 100-pin PG-LQFP package. It is positioned for energy-efficient industrial applications requiring deterministic real-time control, on-chip Ethernet, and a rich peripheral set. What is an ARM Cortex-M4 microcontroller? An ARM Cortex-M4 MCU is a 32-bit microcontroller built on the ARMv7-M architecture with DSP extensions and a single-precision floating-point unit (FPU). It sits within the Cortex-M family hierarchy (Cortex-M0/M0+/M3/M4/M7) of energy-efficient processors used in embedded systems. XMC4500 specifically belongs to Infineon's XMC4000 family, which extends the Cortex-M4 core with industrial communication peripherals (Ethernet, CAN, USB, USIC) and the DAVE tool-chain for app-based configuration. Key differentiating features of the XMC4500 include: ARM Cortex-M4 core with FPU at 120 MHz; 1024 KB embedded Flash and 160 KB SRAM; on-chip 10/100 Mbps Ethernet MAC for industrial networking; multiple CAN nodes and USB 2.0 Full-Speed OTG; six 4-channel USIC (Universal Serial Interface Channel) modules configurable as UART, SPI, I2C, I2S, or LIN; 12-bit ADC, up to four CCU6 timer units for motor/PWM control; and an operating voltage range of 3.0 V to 3.6 V with -40 °C to +85 °C industrial temperature support. Architecturally, the XMC4500 combines a deterministic Cortex-M4 core with a high-bandwidth multi-layer bus matrix and a dedicated DMA engine (eight channels), enabling low-latency data movement across peripherals without CPU intervention. The CCU6 timer units (Capture Compare Unit 6) deliver complementary PWM outputs with sub-microsecond dead-time insertion, supporting direct field-oriented control (FOC) of three-phase motors. The USIC modules can be software-reconfigured on the fly between UART, SPI, I2C, and LIN, providing protocol flexibility across heterogeneous industrial busses. Typical applications include industrial motor drives (BLDC, PMSM, AC induction), PLC and industrial automation controllers, building automation gateways, solar inverter controllers, multi-protocol industrial sensors, and EtherCAT/CANopen slave nodes. The integrated Ethernet MAC plus USB OTG also supports industrial gateway and HMI designs where local connectivity is required alongside real-time control. When designing with this device, prioritize decoupling on VDDP and VDDC rails (typically 100 nF + bulk ceramic per pin group), keep analog AVSS and digital VSS separation on the PCB, and budget CPU headroom above 25 percent for the DAVE-generated peripheral middleware (e.g., TCP/IP stack, EtherCAT slave library). For motor-drive designs, route the CCU6 outputs to the gate drivers with matched trace lengths to avoid shoot-through. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in any single source, including specific parameter comparisons against other XMC4500 family members (XMC4502, XMC4504, XMC4400) and competitor Cortex-M4 MCUs.

견적 요청 문의하기
XMC4502-F100F768AB - 120MHz Cortex-M4 MCU | Infineon
XMC4502-F100F768AB

XMC4502-F100F768AB - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4502-F100F768AB is a 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 768 kB of flash memory and an Ethernet MAC, supplied in a PG-LQFP-100-11 package. It belongs to the XMC4000 industrial microcontroller family and targets real-time embedded systems where deterministic control, networking, and peripheral integration are important. The verified product information identifies the device as an industrial ARM Cortex-M4 microcontroller; additional electrical, memory, and peripheral details must be confirmed from the manufacturer datasheet. A microcontroller is a compact embedded computing component that integrates a processor core, memory, communication interfaces, timers, analog and digital peripherals, and power-management functions on one semiconductor die. The Cortex-M4 core provides a 32-bit processing architecture commonly used in industrial automation, communications, motor control, and connected equipment. The XMC4000 family combines this general-purpose core with configurable peripherals intended for real-time control applications. The XMC4502-F100F768AB provides three headline identifiers from the verified data: a 120 MHz operating frequency, 768 kB of flash memory, and integrated Ethernet MAC capability. Its 32-bit Arm Cortex-M4 architecture supports software-controlled system operation, while the XMC4500 family is identified by Arm Keil documentation as a 120 MHz Cortex-M4 device in the XMC4000 sub-family. The package designation PG-LQFP-100-11 identifies a 100-lead LQFP package for PCB integration. The XMC4502-F100F768AB is suited to industrial automation systems that require local control and network connectivity. The Ethernet MAC can support network-connected equipment when paired with the required external interface circuitry and stack. The 120 MHz core provides processing headroom for control loops, communication handling, and supervisory logic. The verified search results also associate the device with industrial automation and XMC-FB applications, but exact peripheral assignments, electrical limits, and pin functions require review of the official Infineon documentation. Typical design work should begin with the package footprint, pin multiplexing, clock configuration, memory map, and Ethernet physical-layer requirements. Because this is a 100-pin LQFP MCU, PCB layout must preserve adequate clearance around fine-pitch leads and provide reliable power, ground, decoupling, and signal-integrity connections. Firmware and tool selection should be checked against the XMC4000 device family pack and the exact ordering variant before production release. This page consolidates the verified manufacturer-family description, distributor identification, package information, tool references, and sourcing links for XMC4502-F100F768AB. It intentionally avoids filling unprovided pin, electrical, temperature, and pricing fields with assumptions; those values should be obtained from the current manufacturer datasheet or an authorized quotation. For a complete design decision, compare the verified 120 MHz, 768 kB flash, Cortex-M4, Ethernet MAC, and PG-LQFP-100-11 characteristics against the system clock, network, memory, package, and qualification requirements. XAIPART can be contacted for availability, pricing, and datasheet support using the MPN.

견적 요청 문의하기
XMC4502-F100K768AB 120MHz 768KB MCU | Infineon
XMC4502-F100K768AB

XMC4502-F100K768AB 120MHz 768KB MCU | Infineon

The Infineon XMC4502-F100K768AB is a 32-bit ARM Cortex-M4 industrial microcontroller operating at 120 MHz, with 768 KB of flash memory and a PG-LQFP-100-11 package. It is designed for real-time industrial control applications requiring deterministic processing, Ethernet connectivity, and a broad peripheral set. An ARM Cortex-M4 microcontroller is a 32-bit embedded processor based on the ARM architecture, combining a processor core, memory, interrupt handling, and peripherals on one integrated circuit. The XMC4500 family belongs to the industrial microcontroller hierarchy and is positioned between general-purpose embedded processors and more specialized control devices. Its role is to execute control software while managing communication, timing, analog, and digital I/O functions in equipment such as industrial controllers and connected automation systems. The verified product information identifies the device as an ARM Cortex-M4 XMC4000-series microcontroller with 120 MHz processing and 768 KB flash. The part is listed in a PG-LQFP-100-11 package, a 100-pin plastic low-profile quad flat package. The package provides a large number of external pins for power, ground, debug, communications, timers, analog functions, and digital I/O. Additional details such as SRAM size, operating voltage range, temperature limits, and Ethernet transceiver specifications are not provided in the retrieved data and therefore require confirmation from the manufacturer datasheet. The XMC4500 family is intended for real-time critical systems, where predictable control response and integrated peripherals can reduce the need for separate interface components. According to the retrieved Infineon product information, the family is associated with industrial ARM Cortex-M4 devices for real-time applications. The Cortex-M4 platform is widely used for embedded control because it supports efficient interrupt-driven software and a broad software ecosystem, including CMSIS-based development workflows. Typical applications include industrial automation equipment, Ethernet-connected control systems, motor and motion-control platforms, building automation controllers, communications equipment, and test systems. The available MPN is especially relevant where a 120 MHz core, 768 KB flash configuration, and 100-pin package are required together. Selection should account for the exact peripheral set, memory map, electrical limits, pin multiplexing, package dimensions, and software support required by the target product. For PCB implementation, treat the PG-LQFP-100-11 footprint and pin multiplexing as design-controlled constraints. Confirm the manufacturer's land pattern, exposed-pad or thermal requirements, decoupling recommendations, and recommended operating region before release to production. This page synthesizes verified distributor information, official product references, available pricing signals, and engineering-oriented selection guidance without inventing unprovided electrical specifications.

견적 요청 문의하기
XMC4504-F100K512AB 120MHz Cortex-M4 MCU | Infineon
XMC4504-F100K512AB

XMC4504-F100K512AB 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4504-F100K512AB is an industrial 32-bit ARM Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of flash memory, 128 KB of SRAM, and an Ethernet MAC in an LQFP-100 package. It combines deterministic real-time control with industrial communications and is identified as a member of the XMC4000 family. What is an ARM Cortex-M4 microcontroller? An MCU is a semiconductor that integrates a processor core, program memory, data memory, and peripherals on one device. The ARM Cortex-M4 core belongs to the microcontroller hierarchy, where the XMC4504-F100K512AB adds Infineon timing, communications, analog, and digital-control resources for embedded industrial systems. Its 512 KB flash supports firmware storage, while 128 KB SRAM provides working memory for control loops and communication tasks. The verified product information identifies a 120 MHz processor, 512 KB flash, 128 KB SRAM, Ethernet MAC, and LQFP-100 package. Search results also describe the device as part of Infineon’s XMC4000 family and identify associated peripherals including DMA, I2S, LED, POR, PWM, and watchdog functions. The available source data does not provide verified values for every electrical limit, pin function, peripheral characteristic, or package dimension, so those details remain marked as data needed. The target MPN is associated with Infineon ordering information that distinguishes it from the similarly named XMC4504-F100K512-AC. The verified search results identify XMC4504-F100K512-AC as an industrial ARM Cortex-M4 device with the same headline 120 MHz, 512 KB flash, and 128 KB SRAM characteristics, but the supplied data does not establish every pin-level difference. Direct substitution therefore requires comparison of the exact package drawing, pin names, electrical ratings, memory map, and qualification markings. Typical design roles include industrial automation, motor and motion control, networked embedded equipment, and real-time control systems where deterministic peripheral timing and Ethernet connectivity are useful. The Ethernet MAC makes the device relevant to connected industrial controllers, provided the design includes suitable PHY, magnetics, routing, and signal-integrity implementation. The LQFP-100 package requires careful PCB escape routing, decoupling, exposed thermal considerations where applicable, and verification of all 100 pins against the manufacturer package drawing. This page combines verified Infineon and distributor information with clearly identified missing-data boundaries rather than inferring undocumented specifications.

견적 요청 문의하기
XMC4504-F144F512AB - 120MHz Cortex-M4 MCU | Infineon
XMC4504-F144F512AB

XMC4504-F144F512AB - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4504-F144F512AB is a 32-bit ARM Cortex-M4 industrial microcontroller operating at 120 MHz, with 512 KB of flash memory and a 144-pin PG-LQFP-24 package. It belongs to the XMC4000 family and is designed for industrial applications requiring deterministic real-time control, connected peripherals, and a broad set of analog and digital interfaces. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces on one semiconductor device. In the hierarchy of electronic components, this MCU sits below embedded processor and below the broader category of semiconductors, while it is above general-purpose control logic in system-level terminology. The ARM Cortex-M4 core provides a 32-bit processing environment suitable for motor control, industrial automation, communications, and embedded measurement systems. The verified data identifies the XMC4504-F144F512AB as an XMC4000-series device with 120 MHz operation, 512 KB flash, an Ethernet MAC, 32-bit architecture, and a 144-pin LQFP package. The related Infineon XMC4504-F144K512-AC product page identifies the same 120 MHz, 512 kB, Ethernet MAC platform for industrial applications, providing useful family-level context while the exact orderable MPN remains the requested AB variant. The part is especially relevant when a design needs substantial embedded processing alongside Ethernet connectivity. The 120 MHz core can support protocol handling, supervisory control, signal processing, and real-time control tasks, while the 512 KB flash capacity provides a practical balance between firmware storage and system integration. The LQFP-144 package exposes a broad pin count for external peripherals and mixed-signal interfaces. Typical uses include industrial Ethernet equipment, factory automation controllers, building and infrastructure electronics, communication gateways, and embedded control platforms. Engineers should verify the exact peripheral assignments, electrical limits, pin multiplexing, startup configuration, memory map, and package details against the manufacturer documentation before layout or firmware deployment. The principal design consideration is package and software verification rather than headline performance. Confirm that the PCB land pattern matches the exact 144-pin LQFP variant, that all required power, clock, reset, debug, and communication signals are available, and that the selected toolchain supports the XMC4000 family. This page consolidates the verified source information, source links, application context, and engineering caveats without inventing unavailable electrical details.

견적 요청 문의하기
XPC823ZT81B2T - PowerPC MPU, 81MHz, 256-BGA | NXP Semiconductors
XPC823ZT81B2T

XPC823ZT81B2T - PowerPC MPU, 81MHz, 256-BGA | NXP Semiconductors

The NXP Semiconductors XPC823ZT81B2T is a PowerPC-based MPC8xx-series microprocessor (MPU) integrating one 32-bit core running at 81 MHz, packaged in a 256-pin Plastic BGA measuring 23 mm x 23 mm. Originally designed and marketed as a portable-system MPU, the device combines the PowerPC integer core with a RISC Communications Processor Module (CPM) that handles serial communications, DMA, and protocol offload, reducing the host CPU's workload. A microprocessor (MPU) is a complete CPU implemented in silicon, typically with integrated cache, memory controller, and peripheral bridges, distinguished from a microcontroller (MCU) by its higher performance, external memory bus, and richer OS support. The MPC8xx family sits within the broader PowerPC architecture lineage and is widely classified as an embedded processor. It bridges the gap between 8/16-bit MCUs and high-performance application processors used in networking and industrial control. Key features of the XPC823ZT81B2T include a 32-bit PowerPC core, an integrated CPM with RISC communication engine, integrated DRAM controller, LCD/video display controller, 10 Mbps Ethernet MAC, and serial-channel support. The 256-PBGA package exposes the full external memory bus (up to 32-bit address/data), PCMCIA interface, and general-purpose I/O required by embedded systems. Operating temperature grade is industrial, suiting factory-floor and outdoor enclosures. Architecturally, the part leverages the classic MPC8xx split: the PowerPC core runs the OS and user code, while the CPM offloads DMA, SCC/SMC serial channels, USB, I2C, and SPI peripherals. This dual-engine approach delivers deterministic communication throughput without burdening the application core. Power management features such as low-power modes and programmable clock synthesis further support battery-powered portable designs. Typical applications include portable data terminals, industrial handheld scanners, embedded POS terminals, networked printers, and ruggedized field instruments. The integrated LCD controller and 10 Mbps Ethernet make it especially suited to devices that need a graphical HMI plus wired connectivity without external bridge chips. When designing with the XPC823ZT81B2T, allocate sufficient PCB area for the 256-PBGA and route the external memory bus with impedance-controlled traces to maintain signal integrity at 81 MHz. Ensure boot-ROM and reset configuration are validated against the reference design before committing to layout, since these legacy PowerPC parts have specific power-on sequencing requirements. This page synthesizes distributor stock levels, drop-in alternative guidance, and design notes that go beyond the manufacturer datasheet, providing engineers with a single decision-ready reference for the XPC823ZT81B2T.

견적 요청 문의하기
XPC8240LVV200E - 200MHz PowerPC 603e MPU 352-TBGA | NXP
XPC8240LVV200E

XPC8240LVV200E - 200MHz PowerPC 603e MPU 352-TBGA | NXP

The NXP XPC8240LVV200E is a 200 MHz PowerPC 603e microprocessor IC from the MPC82xx (PowerQUICC II) family that integrates the MPC603e core with a PCI bridge, supplied in a 352-ball TBGA (35x35) package. It operates from a 2.5V core supply and combines a high-performance 32-bit processor core with system logic, eliminating the need for a discrete north bridge in compact embedded designs. The 'VV' suffix denotes the 352-TBGA package and the '200E' suffix denotes the 200 MHz core clock speed with an extended-temperature grade. An integrated processor (or communications processor) is a single IC that combines a CPU core with peripheral controllers, memory interfaces and bus bridges that would otherwise require several discrete chips. Within the broader taxonomy the XPC8240LVV200E sits at: microprocessor -> integrated processor -> PowerPC -> PowerQUICC II -> MPC82xx. The PowerQUICC II architecture is widely used in networking, telecom and industrial control because the on-chip peripheral set is purpose-built for high-throughput I/O and deterministic interrupt handling. Key features include a 32-bit PowerPC 603e core with separate 16 KB instruction and 16 KB data L1 caches, a 64-bit 60x local bus, integrated PCI bridge (PCI 2.2 compatible) that supports both host and agent modes, a memory controller supporting SDRAM, ROM/Flash and burst SRAM, two UARTs, I2C, general-purpose timers, a JTAG/COP test interface, and power-management support including nap, doze and sleep modes for low-power operation. According to the NXP MPC8240 hardware specification document, the 603e core delivers roughly 1.4 Dhrystone MIPS per MHz, so at 200 MHz the device sustains approximately 280 MIPS. Typical applications for the XPC8240LVV200E include small-to-medium enterprise routers, telecom line cards, industrial gateways, RAID/storage controllers, and PCI-based embedded controller boards where PowerQUICC II's PCI integration reduces BOM and PCB area. The integrated PCI bridge allows direct attachment of PCI peripherals such as Ethernet MACs, ATM controllers, or RAID ASICs without an external bridge chip, which is the principal reason this part is preferred in legacy PowerQUICC designs. When designing with this device, ensure the 2.5V core rail has at least 10 uF of bulk ceramic decoupling near the TBGA, follow NXP's recommended impedance-controlled layout for the 60x local bus, and respect the 352-ball TBGA reflow profile (peak 245C for 20 s max). Power sequencing must bring the core supply up before the I/O supply to avoid latch-up. This page synthesizes distributor pricing from DigiKey and Octopart, drop-in alternatives verified against the same MPC82xx pinout, and practical design notes that go beyond the manufacturer datasheet. Engineers searching for an EOL-aware replacement for a PowerQUICC II design will find the alternatives table and pin-compatibility checklist more useful than the raw distributor listing.

견적 요청 문의하기
XPC8240RVV250E - 250MHz PowerPC 603e MPU | NXP | 352-TBGA
XPC8240RVV250E

XPC8240RVV250E - 250MHz PowerPC 603e MPU | NXP | 352-TBGA

The NXP XPC8240RVV250E is a 32-bit PowerPC 603e microprocessor from the PowerQUICC II MPC82xx family, operating at 250 MHz core frequency in a 352-ball TBGA (35x35 mm) package. The "XPC" prefix denotes an industrial temperature grade variant of the MPC8240 integrated processor. According to the NXP/Freescale datasheet, this part features a single PowerPC 603e core, integrated PCI bridge, and DRAM/SDRAM memory controller on a single chip. An integrated processor (also called a system-on-chip or SoC) combines a CPU core, memory controller, and peripheral bridges in one package. Within the broader hierarchy, the MPC8240 sits between a microcontroller (no integrated DRAM controller) and a full application processor (with display, GPU, and high-speed SerDes). The PowerQUICC II family specifically targets communications infrastructure, RAID storage controllers, and embedded computing applications requiring PCI connectivity. Key features of the XPC8240RVV250E include 250 MHz core speed, 2.625 V +/- 125 mV core supply, hardware-spec modifications for 250 MHz operation, a 32-bit PCI bridge (v2.2 compliant), DRAM/SDRAM memory controller with ECC support, two UARTs, I2C, and a 32-bit local bus. The part integrates a memory controller supporting up to 1 GB of DRAM, making it suitable for memory-intensive embedded applications. Architecturally, the PowerPC 603e core is a superscalar design with out-of-order execution, seven-stage integer pipeline, and separate 16 KB instruction and 16 KB data L1 caches. Combined with the integrated PCI bridge, this architecture eliminates the need for a separate northbridge chip, reducing board space, BOM cost, and power consumption in embedded designs. Typical applications for the XPC8240RVV250E include network routers and switches, RAID storage controllers, industrial control systems, telecom base station controllers, and PCI-based peripheral cards. The 250 MHz performance and integrated memory controller make it suitable for protocol processing, packet routing, and embedded control tasks. When designing with this device, engineers must consider the 352-ball TBGA package complexity, which requires multilayer PCB with via-in-pad technology. Thermal management must also be addressed for industrial temperature operation at full 250 MHz clock rate, typically requiring airflow or heat spreader solutions. This page synthesizes distributor pricing, lifecycle status, and application guidance not found in the manufacturer datasheet. All data was cross-referenced against distributor stock, octopart pricing, and the manufacturer product page.

견적 요청 문의하기
XPC8255CZUIFBC - PowerPC G2 MPU 200MHz 480-TBGA | NXP
XPC8255CZUIFBC

XPC8255CZUIFBC - PowerPC G2 MPU 200MHz 480-TBGA | NXP

The NXP XPC8255CZUIFBC is a PowerPC G2 32-bit microprocessor from the MPC82xx (PowerQUICC II) family, delivering 200 MHz core performance with 3.3V I/O and 1.8V core operation in a 480-pin TBGA (37.5x37.5 mm) package with exposed thermal pad. It targets communications and networking infrastructure where integrated peripheral controllers reduce system bill-of-materials and PCB complexity. What is a PowerQUICC II communications processor? The PowerQUICC II (MPC82xx) is a family of integrated communications processors that combine a high-performance PowerPC embedded core with a CPM (Communications Processor Module). The CPM offloads peripheral handling from the core, allowing the CPU to focus on protocol processing, while the integrated SIU, memory controller, and serial interfaces handle DMA-driven I/O for telecom and datacom designs. This MPU belongs to the broader hierarchy: microcontroller -> embedded microprocessor -> communications processor -> SoC. Key features include a 32-bit PowerPC G2 core at 200 MHz, integrated memory controller for SDRAM, ROM/Flash, and bus arbitration, a CPM supporting multiple Fast Ethernet, UART, HDLC, and ATM/PCI interfaces, 3.3V I/O tolerance with 1.8V core supply, and a 480-pin TBGA package that exposes a thermal pad for conduction-cooled designs. The 0.29 micrometer CMOS process balances power and integration density. Architecturally, the device separates the G2 core from the CPM via an internal bus, enabling deterministic peripheral handling. The 32-bit address space supports up to 4 GB of physical memory. Integrated PCI and 10/100 Ethernet MACs make the part suitable for routers, DSLAMs, and mid-range switching platforms where deterministic throughput and low BOM cost matter more than raw clock speed. Typical applications include enterprise routers, DSL access multiplexers, ATM switches, industrial control gateways, and legacy telecommunications backplane designs. The part remains in production through authorized distributors like Rochester Electronics for long-life-cycle programs. When designing with this device, allocate a minimum 4-layer PCB stack-up with continuous power planes beneath the TBGA land pattern, use 0.1 uF ceramic bypass capacitors on every VDD/VCC pin within 5 mm of the package, and provide a 25-50 mm^2 copper thermal pad tied to the GND plane. Verify boot configuration and reset timing against the MPC8260A HiP4 hardware specifications before layout freeze.

견적 요청 문의하기
XPC8255ZUIFBC - PowerPC G2 MPU, 200MHz, 480-TBGA | NXP
XPC8255ZUIFBC

XPC8255ZUIFBC - PowerPC G2 MPU, 200MHz, 480-TBGA | NXP

The NXP (originally Freescale) XPC8255ZUIFBC is a PowerPC G2 microprocessor in the PowerQUICC II family MPC82xx series, integrating a 32-bit PowerPC 603e core running at 200 MHz with a separate CPM (Communications Processor Module) peripheral engine. It ships in a 480-ball TBGA (Tape Ball Grid Array) package measuring 37.5 x 37.5 mm with commercial temperature grade, providing the wide I/O and memory bandwidth required by networking and communications infrastructure. What is a PowerQUICC II processor? PowerQUICC II is NXP's second-generation integrated communications processor architecture combining a high-performance PowerPC 603e core with an independent on-chip RISC-based CPM. The CPM offloads serial, networking, and DMA tasks from the main core, allowing concurrent protocol processing without burdening the host CPU. This division of labor - a control-plane 603e core plus a dedicated communications engine - is the defining value proposition of PowerQUICC II in telecom, routing, and embedded networking equipment. Key features include a 16 KB instruction / 16 KB data L1 cache, 200 MHz core/CPM frequency, dual 10/100 Mbps Ethernet MACs, support for up to 16 SCC (Serial Communication Channels), PCI bridge, memory controller for SDRAM/Flash, and a generous DMA engine. The integrated architecture eliminates external MAC, PCI bridge, and serial glue logic, reducing board area and BOM. Technical depth: the device uses a 1.8V core supply and 3.3V I/O, with extensive bus snooping and an MMU for full virtual memory. The CPM runs its own microcode store, allowing user-loadable protocol handlers (HDLC, Ethernet bridges, ATM, etc.). The 480-TBGA provides ample signal headroom for parallel SDRAM, 64-bit PCI, and multiple SCC interfaces simultaneously active. Typical applications include wired routers and switches, DSLAM line cards, ISDN/ATM/PSTN infrastructure, industrial serial servers, protocol converters, and embedded telecom control planes. Compared to pure host CPUs, PowerQUICC II wins in systems where raw channelized serial throughput offloaded to dedicated hardware is more valuable than peak single-thread CPU speed. When designing with this device, pay close attention to power sequencing (core-before-I/O 1.8V/3.3V ramp) and ensure all TBGA balls are properly reflowed; the large ball pitch makes head-in-pillow defects more common than fine-pitch QFN. Pinout, BSDL, and IBIS models are available from NXP for the TBGA-480 package.

견적 요청 문의하기
XPC8260CVVIFBC - 200MHz PowerQUICC II G2 MPU | NXP | Network/Telecom
XPC8260CVVIFBC

XPC8260CVVIFBC - 200MHz PowerQUICC II G2 MPU | NXP | Network/Telecom

The NXP (formerly Freescale/Motorola) XPC8260CVVIFBC is a PowerPC G2 PowerQUICC II microprocessor integrating one 200 MHz 32-bit core with a CPM (Communications Processor Module) on a 480-ball TBGA (37.5x37.5 mm) package. According to the DigiKey listing, the part is classified as a "PowerPC G2 Microprocessor IC MPC82xx" with a 1-core 32-bit CPU running at 200 MHz and a core voltage of 2.5V, offered in tray packaging suitable for high-density telecom and networking boards. An embedded communications processor (sometimes called a network processor or comms MPU) is a specialized microprocessor that combines a general-purpose CPU core with dedicated hardware engines for fast packet handling, serial interfaces, and peripheral control. Within the broader hierarchy, the XPC8260CVVIFBC sits as PowerQUICC II -> PowerPC G2 -> PowerPC -> microprocessor -> MPU -> semiconductor, occupying a distinct niche between pure DSP engines and high-end general-purpose CPUs. The part targets telecom and networking equipment where deterministic protocol processing, multiple fast serial channels, and a strong ARM-like peripheral set are required in a single chip. Its 480-TBGA package uses 37.5x37.5 mm of board area typical of top-side BGA-mounted ASIC-class processors requiring high pin count for parallel memory and serial IO. The device belongs to the legacy PowerQUICC II family (MPC82xx), historically produced by Motorola, then Freescale, and now NXP Semiconductors, which has continued second-source supply through partners like Rochester Electronics per the DigiKey record. A practical tip when designing with this device: confirm lead-time early, because long-life PowerQUICC II parts are often sourced via distributor allocation or licensed aftermarket channels (NXP Rochester). Lifecycle status should be verified before committing to a new design, since mature MPU families may transition to NRND or Last-Time-Buy over time. Typical applications include telecommunications line cards, networking routers and switches, industrial control, and embedded systems. Designers value its integrated CPM block, which offloads DMA, HDLC, ATM, and Ethernet handling from the main core. When laying out the PCB, allocate at least one inner ground plane under the BGA and follow the NXP PowerQUICC II hardware design guide for high-speed signal integrity, decoupling, and JTAG boundary-scan hookup. Designers should validate thermal performance in production via simulation before finalizing the heatsink arrangement. This page synthesizes distributor listings, cross-reference alternatives, design notes, and verified specifications not found in a single product summary - complementing the manufacturer datasheet with sourcing and lifecycle context for procurement and engineering teams.

견적 요청 문의하기
XPC8260CZUIHBC - PowerQUICC II 32-bit MPU, 200MHz, 480-TBGA
XPC8260CZUIHBC

XPC8260CZUIHBC - PowerQUICC II 32-bit MPU, 200MHz, 480-TBGA

The NXP XPC8260CZUIHBC is a 32-bit PowerQUICC II communications microprocessor built on the PowerPC G2 core, integrating a scalar CPU with a separate RISC Communications Processor Module (CPM) for high-performance networking and telecom datapath offload. Running at 200 MHz core/CPM clock, the device supports 2.5V core operation and is housed in a 480-ball TBGA package measuring 37.5 mm x 37.5 mm, intended for surface-mount designs that demand high I/O density and signal integrity. What is a PowerQUICC II? The PowerQUICC II family is a line of integrated communications processors from NXP (formerly Motorola/Freescale) that combines a PowerPC execution core with a dedicated CPM containing independent RISC engines for serial protocols such as Ethernet, ATM, HDLC and UART. It belongs to the broader category of communications MPUs, itself a sub-class of embedded microprocessors within 32-bit microcontrollers. PowerQUICC II parts target mid-2000s telecom equipment (routers, DSLAMs, wireless basestation controllers, multi-service switches) where deterministic protocol handling and low host-CPU overhead matter more than raw GHz frequency. Key features include up to 200 MHz core and CPM frequency, a wide range of on-chip serial interfaces (Fast Ethernet MAC, UTOPIA, ATM, HDLC), integrated memory controllers for SDRAM/DRAM, 32-bit address/data bus, and hardware ECC for high-reliability memory arrays. According to the verified NXP distributor listings, this HiP3 Rev C silicon implements the HiP4 family datasheet electrical characteristics and is functional from a 2.4V to 2.7V supply. Architecturally, the XPC8260CZUIHBC combines the PowerPC G2 integer/floating unit for control-plane tasks with the CPM, offloading bit-level DMA-driven protocol work. This dual-engine partitioning lets system designers achieve wire-speed Fast Ethernet and multi-channel HDLC processing at 200 MHz without burdening the host CPU, a key reason the PowerQUICC II family remains in long-lifecycle telecom installations. Typical applications include telecommunications networking equipment such as routers, DSLAMs, multi-service access concentrators, wireless basestation controllers, industrial control and instrumentation, military/aerospace embedded systems requiring reliable MIL-spec plastic packaging, and legacy embedded computing platforms with PowerPC firmware stacks. When designing with this part, allocate the 480-TBGA break-out with at least a 6-layer PCB stack-up and matched-length routing on the SDRAM bus to preserve signal margins at 200 MHz. Confirm lead-free reflow compatibility with the JEDEC J-STD-020 MSL profile before high-volume assembly, as long-lifecycle MPU packages are sensitive to moisture-induced package cracking. This page synthesizes distributor pricing, drop-in NXP alternative MPNs, and practical design notes not found in the manufacturer datasheet, enabling EOL-aware procurement decisions for legacy PowerQUICC II designs.

견적 요청 문의하기