XMC4504-F144F512AB - 120MHz Cortex-M4 MCU | Infineon
부품 번호: XMC4504-F144F512AB ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
XMC4504-F144F512AB 개요
A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces on one semiconductor device. In the hierarchy of electronic components, this MCU sits below embedded processor and below the broader category of semiconductors, while it is above general-purpose control logic in system-level terminology. The ARM Cortex-M4 core provides a 32-bit processing environment suitable for motor control, industrial automation, communications, and embedded measurement systems.
The verified data identifies the XMC4504-F144F512AB as an XMC4000-series device with 120 MHz operation, 512 KB flash, an Ethernet MAC, 32-bit architecture, and a 144-pin LQFP package. The related Infineon XMC4504-F144K512-AC product page identifies the same 120 MHz, 512 kB, Ethernet MAC platform for industrial applications, providing useful family-level context while the exact orderable MPN remains the requested AB variant.
The part is especially relevant when a design needs substantial embedded processing alongside Ethernet connectivity. The 120 MHz core can support protocol handling, supervisory control, signal processing, and real-time control tasks, while the 512 KB flash capacity provides a practical balance between firmware storage and system integration. The LQFP-144 package exposes a broad pin count for external peripherals and mixed-signal interfaces.
Typical uses include industrial Ethernet equipment, factory automation controllers, building and infrastructure electronics, communication gateways, and embedded control platforms. Engineers should verify the exact peripheral assignments, electrical limits, pin multiplexing, startup configuration, memory map, and package details against the manufacturer documentation before layout or firmware deployment.
The principal design consideration is package and software verification rather than headline performance. Confirm that the PCB land pattern matches the exact 144-pin LQFP variant, that all required power, clock, reset, debug, and communication signals are available, and that the selected toolchain supports the XMC4000 family. This page consolidates the verified source information, source links, application context, and engineering caveats without inventing unavailable electrical details.
드롭인 대체품: XMC4504-F144F512AB — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
XMC4504-F144K512-AC
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
XMC4504-F144F512AB 최대 정격 & 전기적 특성
| Architecture | 32-bit ARM Cortex-M4 |
| Product Family | XMC4000 series |
| 최대 클록 주파수 | 120 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 |
| Ethernet MAC | Integrated Ethernet MAC |
| 패키지 | PG-LQFP-144-24 |
| Package Pin Count | 144 pins |
| Package Type | LQFP |
| 동작 온도 범위 | -40 °C to +85 °C |
| Supply Voltage Range | 3.13 V to 3.63 V |
| ADC Resolution | 12-bit |
| ADC Count | 12 |
| Microcontroller Type | Industrial MCU |
| 실장 유형 | Surface mount |
| RoHS 상태 | RoHS |
XMC4504-F144F512AB lqfp 핀 구성 가이드
XMC4504-F144F512AB(lqfp 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: XMC4504-F144F512AB.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
XMC4504-F144F512AB 적합 용도: 6 애플리케이션s: Industrial Ethernet Control, Factory Automation Controller, Building Infrastructure Electronics, Communication Gateway, Embedded Measurement and Monitoring, Motor and Power-System Control.
Industrial Ethernet Control
The XMC4504-F144F512AB fits industrial Ethernet control because its verified feature set combines a 120 MHz ARM Cortex-M4 core, 512 KB flash, and an Ethernet MAC. It can serve as the supervisory controller in a gateway, PLC-adjacent controller, or communication concentrator where local control and network connectivity must coexist. The MCU provides a platform for protocol handling, supervisory logic, diagnostics, and real-time peripheral control without relying on a separate host processor. The principal design check is the exact XMC4504 suffix pinout, Ethernet PHY interface, clocking, and 3.13 V to 3.63 V supply requirements. Use the manufacturer datasheet to confirm PHY, connector, isolation, and board-level network requirements before layout.
추천
Factory Automation Controller
The XMC4504-F144F512AB is suitable as an industrial automation controller because the verified data identifies a 120 MHz Cortex-M4 processor, 512 KB flash, and industrial microcontroller positioning. Those resources support sequencing, actuator monitoring, sensor acquisition, and communication tasks in factory equipment. The integrated Ethernet MAC can reduce the need for a separate network interface when the selected board design uses a compatible PHY and isolation network. Before deployment, confirm the exact analog and digital peripheral map, ADC requirements, timers, communication peripherals, and package pin availability. The 144-pin LQFP package offers more external connectivity than a small leadless package, but its 144-pin footprint still requires careful escape routing and thermal-aware layout.
추천
Building Infrastructure Electronics
The XMC4504-F144F512AB can support building infrastructure controllers that need deterministic embedded processing and network-aware monitoring. Its verified 120 MHz Cortex-M4 core is suitable for coordinating sensors, relays, meters, and remote diagnostics, while the Ethernet MAC supports connected building equipment when paired with the correct physical-layer interface. The 512 KB flash capacity is useful for application firmware and configuration data, although RAM availability is not stated in the supplied data and must be checked before selecting the exact device. Engineers should confirm low-power behavior, watchdog strategy, environmental requirements, isolation requirements, and the exact package pinout. The part should not be assumed to replace a dedicated safety controller without appropriate certification and diagnostic review.
추천
Communication Gateway
The XMC4504-F144F512AB is a reasonable candidate for a communication gateway that combines local control with network connectivity. The 120 MHz ARM Cortex-M4 core can execute protocol stacks, buffering logic, routing decisions, and supervisory functions, while the verified Ethernet MAC supports an Ethernet-facing communication path. The 512 KB flash capacity provides storage for firmware and configuration, but the final firmware budget must be measured against the selected compiler, runtime, diagnostics, security features, and update mechanism. Gateway designs should explicitly review package pin multiplexing, Ethernet PHY requirements, clock source, reset behavior, and 3.13 V to 3.63 V power design. Because exact peripheral assignments are not included in the verified material, hardware and firmware engineers must work from the exact manufacturer documentation.
추천
Embedded Measurement and Monitoring
The XMC4504-F144F512AB can be used in embedded measurement equipment where control processing, 12-bit conversion resources, and communications are required. The verified data specifies a 12-bit ADC and a 120 MHz Cortex-M4 core, which can support sensor conditioning, sampling coordination, filtering, calibration, and host communication. The exact ADC channel count, sampling characteristics, analog voltage limits, and peripheral routing are not supplied, so the part should be selected only after checking those details in the exact datasheet. The LQFP-144 package provides access to many pins, but analog layout remains sensitive to grounding, reference design, noise sources, and digital-to-analog coupling. Use careful partitioning and validate the complete measurement chain before production.
추천
Motor and Power-System Control
The XMC4504-F144F512AB may be evaluated for industrial motor or power-system control because it combines a 120 MHz 32-bit Cortex-M4 core with a 512 KB flash program memory and multiple potential control peripherals. The MCU can execute current control, sequencing, fault handling, and supervisory communication tasks when the exact timer, ADC, PWM, and fault-input assignments meet the application requirements. The verified data does not provide those peripheral mappings, so engineers must confirm them before making a motor-control design decision. A robust implementation also needs isolated gate drivers, current sensing, desaturation or fault handling, appropriate PCB creepage and clearance, and thermal analysis. Do not treat the MCU's stated clock frequency or package size as proof of motor-control suitability without reviewing the exact electrical and pin documentation.
추천
추천 제품 요약
엔지니어링 참조 데이터: XMC4504-F144F512AB — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | XMC4504-F144K512-AC |
|---|---|---|
| Brand | Infineon | Infineon |
| Core | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum Frequency | 120 MHz | 120 MHz |
| Flash Memory | 512 KB | 512 KB |
| Ethernet MAC | Integrated Ethernet MAC | Ethernet MAC |
주요 차별점
- Exact AB ordering code (vs XMC4504-F144K512-AC)
- Verified 120 MHz Cortex-M4 processing (vs XMC4504-F144K512-AC)
- Verified Ethernet MAC positioning (vs XMC4504-F144K512-AC)
설계 노트
Design the power tree around the verified 3.13 V to 3.63 V operating range. Confirm the exact absolute maximum ratings, core and I/O voltage domains, decoupling requirements, brownout behavior, and startup sequencing in the manufacturer datasheet before placing bypass capacitors or selecting a regulator. Estimated: if the design uses a nominal 3.3 V rail, the available margin is approximately 0.17 V at the upper verified operating limit and approximately 0.17 V at the lower limit before accounting for tolerance and transient variation; regulator accuracy and load regulation must therefore be selected with additional margin.
Route the 144-pin LQFP footprint and exposed thermal considerations as a complete package design, not merely as a generic 144-pin symbol. Confirm pad dimensions, pin-1 orientation, solder mask, paste stencil, assembly tolerances, and exposed-pad connection using the exact Infineon package drawing. Keep analog, digital, clock, reset, and communication routes separated where their timing or noise sensitivity differs. Because the complete pinout is absent from the verified data, do not freeze the PCB layout until the exact AB package drawing has been checked.
Do not assume that parts with the same XMC4504 family name have identical suffixes, memory maps, peripheral options, or package assignments. The verified data explicitly shows the related XMC4504-F144K512-AC, but it does not provide a complete pin-by-pin comparison. Before substituting it, compare the AB and AC ordering codes, exact datasheet revision, flash and RAM configuration, Ethernet MAC options, analog peripherals, pin multiplexing, temperature grade, and qualification requirements. Treat family similarity as a review starting point, not proof of drop-in compatibility.
규정 준수 정보
The supplied JLCPCB result contains the term RoHS, but no formal compliance declaration or scope was provided. The part is identified as an industrial MCU; automotive qualification status is not supplied.
