AD602JR vs AD600JR 비교
다음의 상세 나란히 비교: AD602JR 제조: Analog Devices 및 AD600JR 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD602JR | AD600JR |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Number of Channels | 2 channels | — |
| Channel Architecture | 2 independent gain-control channels | — |
| Gain Range | -10 dB to +30 dB | — |
| Gain-Control Response | Linear in dB | — |
| Gain Accuracy | 0.3 dB accurate absolute gain | — |
| Input Noise Density | 1.4 nV/√Hz | 1.4 nV/√Hz |
| -3 dB Bandwidth | 35 MHz | — |
| Total Harmonic Distortion | -60 dBc THD at 1 V output | −60 dBc at 1 V output |
| Number of Gain Ranges | 2 gain ranges | — |
| Upper Gain Range | +30 dB | — |
| Package Type | 16-lead SOIC | — |
| 실장 유형 | Surface mount | Surface mount |
| Primary Application | Ultrasound imaging | — |
| Signal Type | Analog | — |
| Control Interface | Analog gain control | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | 0°C to 70°C |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | [DATA_NEEDED: supply voltage range] |
| 대기 전류 | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: quiescent current] |
| Input Impedance | [DATA_NEEDED: input impedance] | — |
| Output Impedance | [DATA_NEEDED: output impedance] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Product Type | — | Dual-channel variable gain amplifier |
| Channel Count | — | 2 channels |
| Gain Control | — | Independent control for each channel |
| Maximum Gain Range | — | +30 dB |
| Gain Response | — | Linear in dB |
| Absolute Gain Accuracy | — | 0.3 dB |
| Small-Signal Bandwidth | — | 35 MHz at −3 dB |
| Slew Rate | — | 275 V/µs |
| 패키지 | — | 16-lead SOIC |
| 입력 전압 범위 | — | [DATA_NEEDED: input voltage range] |
| Gain-Control Input Type | — | [DATA_NEEDED: gain-control input type] |
| Output Load Requirement | — | [DATA_NEEDED: output load requirement] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |