AD624ADZ vs AD624BDZ 비교
다음의 상세 나란히 비교: AD624ADZ 제조: Analog Devices 및 AD624BDZ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
AD624BDZ - 25 MHz Low-Noise Instrumentation Amplifier | Analog Devices
AD624BDZ Unknown사양 비교
| 파라미터 | AD624ADZ | AD624BDZ |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | NRND | Unknown |
| Amplifier Type | Instrumentation Amplifier | — |
| Number of Circuits | 1 | — |
| Gain Bandwidth Product | 25 MHz | — |
| Slew Rate | 5 V/us | 5 V/µs |
| Settling Time | 15 us | 15 µs |
| Input Offset Voltage | 200 uV | 75 µV |
| Supply Voltage Range | +/-6 V to +/-18 V | ±6 V to ±18 V |
| Factory-Trimmed Gains | 1, 100, 200, 500, 1000 | — |
| 패키지 | 16-CDIP (0.300 inch, 7.62 mm) | 16-lead ceramic DIP |
| 실장 유형 | Through Hole | Through-hole |
| External Components for Trimmed Gains | Not required (gains of 1, 100, 200, 500, 1000) | — |
| Typical Application | Load cells, strain gauges, pressure transducers, data acquisition | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: CMRR] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| 대기 전류 | [DATA_NEEDED: quiescent current] | — |
| Input Noise Density | [DATA_NEEDED: input voltage noise density] | — |
| Product Type | — | Precision instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Gain-Bandwidth Product | — | 25 MHz |
| Trimmed Gain Settings | — | 1, 100, 200, 500, and 1000 |
| External Gain-Setting Components | — | Not required for trimmed gains |
| Input Signal Type | — | Differential |
| Common-Mode Rejection | — | [DATA_NEEDED: Common-mode rejection ratio] |
| Input Noise | — | [DATA_NEEDED: Input noise density] |
| Gain Accuracy | — | [DATA_NEEDED: Gain accuracy] |
| 출력 전압 범위 | — | [DATA_NEEDED: Output voltage range] |
| RoHS 상태 | — | unknown |
| REACH Status | — | unknown |
| Automotive Qualification | — | not_applicable |