AS7331-AQFM vs AS7331-AQFM-OLGA16-LF 비교
다음의 상세 나란히 비교: AS7331-AQFM 제조: ams OSRAM 및 AS7331-AQFM-OLGA16-LF 제조: ams OSRAM. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
ams OSRAM
AS7331-AQFM-OLGA16-LF - UVA/UVB/UVC Spectral UV Sensor | ams OSRAM
AS7331-AQFM-OLGA16-LF ✓ 활성사양 비교
| 파라미터 | AS7331-AQFM | AS7331-AQFM-OLGA16-LF |
|---|---|---|
| 브랜드 | ams OSRAM | ams OSRAM |
| 카테고리 | Image Sensors | Humidity Sensors |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $7.87 | $6.94 |
| 센서 유형 | 3-channel spectral UV sensor (UVA/UVB/UVC) | Spectral UV Sensor (UVA / UVB / UVC) |
| Spectral Range | 260 nm to 360 nm | 260 nm to 360 nm |
| 채널 수 | 3 (UVA, UVB, UVC) with interference filter technology | — |
| 인터페이스 | I2C (adjustable slave address) | I2C |
| 공급 전압 | 3.3 V | 2.7 V to 3.6 V |
| ADC Resolution | 16 to 24 bit | — |
| Dynamic Range | up to 3.43E+10 (adjustable) | — |
| Sensitivity (UVA) | up to 421 counts/(uW/cm2) | — |
| Smallest LSB | 2.38 nW/cm2 (at 64 ms integration time) | — |
| Operating Modes | 4 low-power modes; continuous and triggered measurement | 4 (continuous and triggered measurement) |
| Integrated Temperature Sensor | Yes (coarse thermal compensation) | — |
| Synchronization | SYNC input; RDY output (push-pull or open-drain) | — |
| 패키지 | 16-pin OLGA / TFLGA, SMD | OLGA-16, 3.65 mm x 2.6 mm (16-TFLGA) |
| 실장 유형 | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (LF T&R) | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | Compliant (per JLCPCB/LCSC listing) |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| Number of Channels | — | 3 (UVA, UVB, UVC) |
| 분해능 | — | 24-bit digital output |
| 동작 온도 | — | -40 C to +105 C |
| Responsivity Adjustment | — | Via gain, conversion time and internal clock frequency |
| Photodiode Type | — | UV-optimized photodiodes |
| Power Characteristic | — | Low power, low noise |
| Packaging Suffix | — | T&R (Tape and Reel), LF lead-free finish |
| 대기 전류 | — | [DATA_NEEDED: quiescent current] |
| I2C Address | — | [DATA_NEEDED: I2C slave address] |