ATMEGA88-15AD vs ATMEGA88-20AI 비교
다음의 상세 나란히 비교: ATMEGA88-15AD 제조: Microchip Technology 및 ATMEGA88-20AI 제조: Microchip Technology. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Microchip Technology
ATMEGA88-15AD - 8KB Flash AVR MCU 16MHz 5V | Atmel/Microchip
ATMEGA88-15AD ✓ 활성Microchip Technology
ATMEGA88-20AI - 8-bit AVR MCU 20MHz 8KB Flash TQFP-32 | Microchip
ATMEGA88-20AI ✓ 활성사양 비교
| 파라미터 | ATMEGA88-15AD | ATMEGA88-20AI |
|---|---|---|
| 브랜드 | Microchip Technology | Microchip Technology |
| 카테고리 | Microcontrollers | Microcontrollers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $1.55 | $1.38 |
| Core Architecture | AVR 8-bit RISC | — |
| Flash Memory | 8 KB (ISP, read-while-write) | — |
| EEPROM | 512 B | 512 B |
| SRAM | 1 KB | 1 KB |
| Maximum Clock Speed | 16 MHz | — |
| Supply Voltage Range | 4.5 V to 5.5 V | 1.8 V to 5.5 V |
| General Purpose I/O | 23 lines | — |
| Working Registers | 32 x 8-bit | — |
| Instructions | 130 (most single-cycle) | — |
| Timers/Counters | Three flexible timer/counters | — |
| Package Type | TQFP, 7 x 7 mm, 1.0 mm height, 0.8 mm pitch | — |
| 실장 유형 | Surface Mount | Surface Mount |
| Throughput | Up to 1 MIPS per MHz | — |
| ADC | 6-channel 10-bit | — |
| Serial Interfaces | USART, SPI, Two-Wire (I2C-compatible) | — |
| Life Cycle Stage | ACTIVE (newer device ATMEGA88A available) | — |
| Debug Interface | debugWIRE on-chip debug | — |
| Core Processor | — | AVR 8-bit RISC |
| Core Size | — | 8-bit |
| Speed | — | 20 MHz |
| Flash Program Memory | — | 8 KB (4K x 16) |
| Max Clock at Full Voltage | — | 20 MHz at 4.5 V to 5.5 V |
| GPIO Count | — | 23 |
| ADC Resolution | — | 10-bit, 8 channels |
| Communication Interfaces | — | USART, SPI, TWI (I2C) |
| Timers | — | Two 8-bit, one 16-bit |
| MIPS Throughput | — | Up to 20 MIPS at 20 MHz |
| 동작 온도 | — | -40C to +85C |
| 패키지 | — | 32-TQFP (7x7 mm) |
| On-Chip Debug | — | DebugWIRE |
| Programming | — | ISP, read-while-write Flash |
| Reset/Brown-out | — | Power-on Reset, Brown-out Detect/Reset |