BTS426L1E3062AAUMA1 vs BTG7003A1EPWXUMA2 비교
다음의 상세 나란히 비교: BTS426L1E3062AAUMA1 제조: Infineon 및 BTG7003A1EPWXUMA2 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Infineon
BTG7003A1EPWXUMA2 - 15.7A PROFET Wire Guard High-Side Switch | Infineon
BTG7003A1EPWXUMA2 ✓ 활성사양 비교
| 파라미터 | BTS426L1E3062AAUMA1 | BTG7003A1EPWXUMA2 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $2.35 | $2.20 |
| Manufacturer | Infineon Technologies | — |
| Product Family | Classic PROFET 12V | — |
| 기능 | Smart High-Side Power Switch | — |
| 토폴로지 | N-Channel Vertical Power FET with Charge Pump | — |
| 출력 수 | 1 | — |
| 출력 구성 | High-Side | — |
| Typical On-State Resistance (RDS(on)) | 5 mΩ | — |
| Continuous Load Current | 7 A | — |
| Nominal Operating Voltage | 12 V (automotive) | — |
| Input Type | CMOS-compatible, ground-referenced | — |
| Diagnostic Output | Yes (ST pin, ground-referenced feedback) | — |
| Embedded Protections | Overload, Thermal Shutdown, Overvoltage Clamp, ESD | — |
| Technology | Smart SIPMOS, monolithic | — |
| 패키지 | PG-TO263-5-2 (DPAK-5, surface mount) | PG-TSDSO-14-22 (exposed pad) |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 범위 | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] | — |
| RoHS 상태 | Compliant | Compliant |
| Automotive Qualification | AEC-Q100 (per Classic PROFET 12V family) | — |
| Switch Type | — | High-Side Power Switch |
| Number of Channels | — | 1 |
| Configuration | — | 1:1 N-Channel |
| Maximum Continuous Load Current | — | 15.7 A |
| Operating Voltage Range | — | 6 V to 18 V |
| Load Dump Tolerance | — | 40 V |
| Idle Mode Quiescent Current | — | 50 µA |
| On-Resistance R_DS(on) | — | 10 mΩ (typ) |
| Control Input | — | Active High |
| Wire Protection | — | Integrated I²t |
| Functional Safety | — | ISO 26262 compliant |
| 동작 온도 | — | -40C to +150C (TJ) |