DG211CJ+ vs DG211DY+T 비교

다음의 상세 나란히 비교: DG211CJ+ 제조: Maxim Integrated 및 DG211DY+T 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Maxim Integrated
DG211CJ+ DG211CJ+ - 4-Channel SPST Analog Switch | Maxim Integrated

DG211CJ+ - 4-Channel SPST Analog Switch | Maxim Integrated

DG211CJ+ ✓ 활성
Analog Devices
DG211DY+T DG211DY+T - Quad SPST CMOS Analog Switch | Analog Devices

DG211DY+T - Quad SPST CMOS Analog Switch | Analog Devices

DG211DY+T ✓ 활성

사양 비교

파라미터 DG211CJ+ DG211DY+T
브랜드 Maxim Integrated Analog Devices
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Number of Channels 4 channels —
Switch Configuration 4 × SPST 1:1 SPST
Signal Configuration 1:1 —
On-Resistance 175 ohm maximum 175 ohm maximum
Technology CMOS CMOS
Supply Voltage Range ±4.5 V to ±18 V —
패키지 16-pin PDIP 16-SOIC, 0.154 inch (3.90 mm) width
실장 유형 Through-hole Surface mount
Switch Type Normally closed SPST analog switch —
Switching Behavior Guaranteed break-before-make Break-before-make guaranteed
Continuous Terminal Current 30 mA maximum —
Peak Terminal Current 20 mA maximum —
Storage Temperature to +150 °C —
Control Interface Digital control inputs —
Latch-Up Protection No latch-up when supplies are disconnected with input signals connected Guaranteed not to latch up with disconnected supplies and connected input signals
RoHS 상태 [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Number of Circuits — 4 circuits
Number of Switches — 4 normally closed SPST switches
Positive Supply Range — +4.5 V to +18 V
Negative Supply Range — -4.5 V to -18 V
Total Supply Range — ±4.5 V to ±18 V
Turn-On Time — 1000 ns maximum
Turn-Off Time — 500 ns maximum
Switching Transients — Glitch-free switching
동작 온도 범위 — -40 °C to +85 °C
Package Height — 1.75 mm maximum

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청