DG409DJ+ vs MAX303CPE+ 비교
다음의 상세 나란히 비교: DG409DJ+ 제조: Analog Devices 및 MAX303CPE+ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | DG409DJ+ | MAX303CPE+ |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Dual 4-channel CMOS analog multiplexer | — |
| Multiplexer Configuration | 4:1 | — |
| Number of Circuits | 2 circuits | — |
| Number of Channels per Circuit | 4 channels | — |
| On-Resistance | 100 ohm | Less than 35 ohm |
| Supply Voltage Range | 5 V to 30 V | — |
| Maximum Charge Injection | 15 pC | — |
| Input Off-Leakage Current | Less than 5 nA at 85 C | — |
| ESD Protection | Greater than 2000 V | — |
| 패키지 | 16-pin PDIP | 16-pin plastic DIP |
| 실장 유형 | Through-hole | Through-hole |
| Signal Conduction Direction | Bidirectional | — |
| Control Logic Compatibility | TTL/CMOS-compatible | — |
| Channel Matching | 8 ohm maximum | — |
| Flatness Over Signal Range | 9 ohm maximum | — |
| Primary Applications | Audio-signal routing, communication systems, data acquisition, guidance and control systems, sample-and-hold circuits, test equipment | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Device Type | — | Precision, dual, high-speed analog switch |
| Number of Channels | — | 2 channels |
| Switch Configuration | — | 2:1 SPDT per channel |
| On-Resistance Matching Between Channels | — | Within 2 ohm |
| Normally Open Paths | — | 2 paths |
| Normally Closed Paths | — | 2 paths |
| Leakage Current at 25°C | — | Less than 250 pA |
| Leakage Current at 85°C | — | Less than 6 nA |
| Positive Supply Voltage | — | 10 V to 30 V |
| Negative Supply Voltage | — | -4.5 V to -20 V |
| Switching Time | — | [DATA_NEEDED: switching time] |
| Channel-to-Channel Capaciticity | — | [DATA_NEEDED: channel-to-channel capacitance] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |