DS90C365MTD vs DS90C365MTDX 비교
다음의 상세 나란히 비교: DS90C365MTD 제조: National Semiconductor 및 DS90C365MTDX 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
National Semiconductor
DS90C365MTD - 85MHz FPD-Link LVDS Transmitter | Texas Instruments
DS90C365MTD Obsolete사양 비교
| 파라미터 | DS90C365MTD | DS90C365MTDX |
|---|---|---|
| 브랜드 | National Semiconductor | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | Obsolete | 활성 |
| Device Type | LVDS transmitter | — |
| Number of Drivers | 1 driver | 1 |
| Number of Receivers | 0 receivers | — |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Protocol | FPD-Link, LVDS | — |
| Data Format | 18-bit or 24-bit Flat Panel Display Link | — |
| Pixel Clock | 85 MHz | — |
| Maximum Throughput | 2.38 Gbps | — |
| Maximum Bandwidth | 297.5 MB/s | — |
| LVDS Output Swing | 345 mV typical | — |
| PLL Requirement | No external components required | — |
| LVDS Standard Compatibility | TIA/EIA-644 | — |
| 패키지 | 48-lead TSSOP | 48-TSSOP |
| Package Width | 6.10 mm | — |
| Lead Pitch | 0.240 mm | — |
| Packaging | Tube | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Product Type | — | Programmable LVDS FPD-Link transmitter |
| 공급 전압 | — | +3.3 V |
| 최대 클록 주파수 | — | 85 MHz |
| Data Channel Width | — | 18 bit |
| Signal Standard | — | LVDS |
| Interface Family | — | Flat Panel Display (FPD) Link |
| Driver Configuration | — | 1 driver |
| Number of Functions | — | 4 |
| Logic Family | — | CMOS |
| 핀 수 | — | 48 pins |
| 실장 유형 | — | Surface mount |
| Output Differential Voltage | — | [DATA_NEEDED: LVDS output differential voltage] |
| 공급 전류 | — | [DATA_NEEDED: supply current] |
| Input Latch Type | — | [DATA_NEEDED: input latch type] |