EPC81500RC304-3 vs EPC4QC100N 비교
다음의 상세 나란히 비교: EPC81500RC304-3 제조: Altera 및 EPC4QC100N 제조: Intel. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Altera
EPC81500RC304-3 - Enhanced Configuration Device for SRAM FPGAs | Altera
EPC81500RC304-3 Obsolete
사양 비교
| 파라미터 | EPC81500RC304-3 | EPC4QC100N |
|---|---|---|
| 브랜드 | Altera | Intel |
| 카테고리 | FPGA & CPLD | Memory ICs |
| 수명 주기 상태 | Obsolete | NRND |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $23.90 | $8.10 |
| Device Type | Enhanced Configuration Device (Flash-based FPGA configuration memory) | — |
| Target FPGA Families | Altera FLEX 8000, FLEX 10K, ACEX 1K, APEX series SRAM-based LUT FPGAs | — |
| Configuration Memory Size | 8 Mbit | — |
| Interface Modes | Parallel-byte and serial bitstream modes | — |
| Programming Interface | JTAG (IEEE 1149.1) and byte-wide parallel | — |
| Supply Voltage VCCINT | 3.3 V | — |
| I/O Voltage VCCIO | 3.3 V or 5.0 V tolerant | — |
| 동작 온도 범위 | 0 C to +70 C (commercial) | — |
| 패키지 | 304-pin PQFP (RC304) | 100-pin PQFP (Plastic Quad Flat Pack) |
| 실장 유형 | Surface Mount | Surface Mount |
| 핀 수 | 304 | — |
| Configuration Clock | DCLK generated internally or externally to target FPGA | — |
| Multi-Device Support | Yes - daisy-chain configuration of multiple FPGAs | — |
| RoHS 상태 | [DATA_NEEDED: RoHS compliance status] | — |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| 메모리 유형 | — | Flash (NOR, configuration PROM) |
| 메모리 크기 | — | 4 Mbit (4,194,304 bits) |
| Programmable Type | — | In System Programmable (ISP) |
| Configuration Interface | — | Serial / Parallel / JTAG (IEEE 1149.1) |
| Maximum DCLK Frequency | — | 66.7 MHz |
| On-Chip Decompression | — | Yes |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Typical Supply Voltage | — | 3.3 V |
| 동작 온도 | — | 0 C to 70 C (commercial) |
| Package Dimensions | — | 20 x 14 mm |
| Pin Pitch | — | 0.65 mm |
| Packaging | — | Tray |
| Lead Free / RoHS | — | Yes (per chipdig datasheet excerpt) |
| Family | — | EPC4 Enhanced Configuration Device |
| JTAG Support | — | Yes (IEEE 1149.1 boundary-scan) |