EPM5032DC-2 vs EPM5016DC-20 비교

다음의 상세 나란히 비교: EPM5032DC-2 제조: Altera 및 EPM5016DC-20 제조: Altera. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 EPM5032DC-2 EPM5016DC-20
브랜드 Altera Altera
카테고리 FPGA & CPLD FPGA & CPLD
수명 주기 상태 Obsolete Obsolete
재고 상태 In Stock In Stock
단가 (USD) $8.75 $16.50
Product Type CPLD (Complex Programmable Logic Device) —
Series MAX 5000 —
Macrocells 32 16
Usable Gates (typical) 600 —
Logic Array Blocks (LABs) 4 —
패키지 20-pin CDIP (Ceramic DIP) —
Speed Grade -2 (tPD ~25 ns, commercial) -20 = 20 ns tPD
Configuration Memory EPROM (one-time programmable per generation; UV-erasable variants exist) —
Supply Voltage (VCC) 5 V (single supply, +/-5%) —
동작 온도 0C to +70C (commercial grade) [DATA_NEEDED: operating temperature range]
Programmable Pins / I/O 20 pins (JEDEC-standard 0.300" ceramic DIP) —
Programming Interface Altera ByteBlaster / parallel-port JTAG-style ISP —
Interconnect Programmable Interconnect Array (PIA) with deterministic timing —
RoHS 상태 [DATA_NEEDED: RoHS compliance - CDIP package typically pre-RoHS] [DATA_NEEDED: RoHS compliance]
실장 유형 Through-Hole (DIP) —
MSL 레벨 Not applicable (through-hole hermetic ceramic) —
Family — MAX 5000
Device Type — EPLD (UV-Erasable Programmable Logic Device)
Product Terms — 160
Dedicated Inputs — 7
I/O Pins — 8
Propagation Delay (tPD) — 20 ns
최대 클록 주파수 — 62.5 MHz
Maximum Supply Voltage — 5.25 V
Nominal Supply Voltage — 5.0 V
Process Technology — CMOS, UV-erasable
Architecture — PAL-type macrocell with Programmable Interconnect Array (PIA)
Package Type — 20-pin Ceramic DIP (Cerdip) with UV window
Package Suffix Code — DC = Ceramic DIP, Commercial
Programming Method — UV erase + EPROM-style programming via Altera programming hardware

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청