INA157UA vs INA157U 비교
다음의 상세 나란히 비교: INA157UA 제조: Texas Instruments 및 INA157U 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | INA157UA | INA157U |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Device Type | High-speed, precision difference amplifier | — |
| Number of Amplifier Channels | 1 channel | — |
| Bandwidth | 4 MHz | 3 MHz |
| Offset Voltage | ±500 µV maximum | — |
| Offset Voltage Drift | ±2 µV/°C maximum | — |
| Gain Error | ±0.05% maximum | — |
| Differential Gain | 1 V/V | — |
| Internal Resistor Network | Precision, laser-trimmed | Precision, ratio-matched, laser-trimmed |
| 패키지 | 8-pin SOIC (D) | 8-pin SOIC |
| 실장 유형 | Surface mount | Surface mount |
| 동작 온도 범위 | -55 °C to +125 °C | -40°C to +85°C |
| 공급 전압 | [DATA_NEEDED: supply voltage range] | — |
| Maximum Output Voltage | [DATA_NEEDED: maximum output voltage] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| 대기 전류 | [DATA_NEEDED: quiescent current] | — |
| 공급 전류 | [DATA_NEEDED: supply current] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| RoHS 상태 | unknown | unknown |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Product Type | — | High-speed, precision difference amplifier |
| Maximum Offset Voltage | — | ±500 µV |
| Maximum Offset Drift | — | ±2 µV/°C |
| Maximum Gain Error | — | ±0.05% |
| Circuit Count | — | 1 circuit |
| Internal Resistor Absolute Tolerance | — | ±20% |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Offset Current | — | [DATA_NEEDED: input offset current] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Noise | — | [DATA_NEEDED: input voltage noise] |