LM211D vs LM211DR2G 비교
다음의 상세 나란히 비교: LM211D 제조: Texas Instruments 및 LM211DR2G 제조: onsemi. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
LM211D - Single Differential Comparator with Strobe | Texas Instruments
LM211D ✓ 활성사양 비교
| 파라미터 | LM211D | LM211DR2G |
|---|---|---|
| 브랜드 | Texas Instruments | onsemi |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Comparator Type | Single differential comparator with strobes | Single general-purpose voltage comparator |
| Architecture | Differential voltage comparator | — |
| Supply Voltage Examples | ±15 V and 5 V | — |
| 출력 유형 | Open-collector | Open collector |
| Logic Compatibility | TTL and MOS compatible | DTL, MOS, open-emitter, open-collector, RTL, and TTL |
| Load Capability | Capable of driving lamps or relays | — |
| 패키지 | 8-pin SOIC | 8-pin SOIC |
| 동작 온도 범위 | -40°C to +85°C | -25 °C to +85 °C |
| Number of Channels | 1 channel | — |
| Input Configuration | Differential inputs | — |
| Strobe Function | Yes | — |
| 실장 유형 | Surface mount | Surface mount |
| Datasheet Page Count | 25 pages | — |
| Datasheet File Size | 506 kB | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Response Time | [DATA_NEEDED: comparator response time] | 200 ns |
| Output Sink Current | [DATA_NEEDED: maximum output sink current] | — |
| 공급 전류 | [DATA_NEEDED: supply current] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Supply Voltage Range, Single Supply | — | 5 V to 30 V |
| Supply Voltage Range, Split Supply | — | ±15 V |
| Number of Comparators | — | 1 |
| Input Isolation | — | Inputs may be isolated from system ground with split supplies |
| Output Reference Flexibility | — | Loads may be referenced to ground, VCC, or VEE |
| Output Drive Capability | — | Capable of driving lamps and relays |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |