onsemi

LM211DR2G - Single 5-30V Comparator | onsemi

부품 번호: LM211DR2G ✓ 활성
5 V to 30 V Vdss 8-pin SOIC Package
MOQ: 1 |

LM211DR2G 개요

The onsemi LM211DR2G is a single general-purpose voltage comparator designed for operation from a 5 V to 30 V single supply or split supplies of ±15 V. It provides a 200 ns response time and is packaged in an 8-pin SOIC. The comparator supports open-collector output operation, allowing its output state to be pulled up to a suitable supply or load reference while providing a compatible interface for DTL, MOS, open-emitter, open-collector, RTL, and TTL circuits.

A voltage comparator is an analog signal-conditioning component that compares two input voltages and produces a logic-level output indicating which input is higher. Comparators belong to the broader amplifier and comparator hierarchy, where they sit between sensor or measurement inputs and digital control logic. Unlike an operational amplifier intended primarily for linear amplification, the LM211 is optimized for rapid, direct threshold decisions, making it useful in industrial control, sensing, protection, and switching interfaces.

Key features include a single-comparator configuration, a 5 V to 30 V supply range, a 200 ns response time, and an operating temperature range of -25 °C to +85 °C. Its open-collector output provides flexible pull-up placement and permits the output to drive lamps, relays, and other loads referenced to ground, VCC, or VEE. These characteristics make the device useful where a logic decision must be translated into an actionable system output.

The LM211 architecture supports input voltages that are isolated from system ground when split supplies are used. This allows the comparator inputs to monitor signals in systems that also use negative rails. The output topology is flexible rather than tied to only one fixed supply, which helps engineers construct level-shifting, isolation, and relay-driving circuits without changing the comparator package or footprint.

Typical applications include industrial sensor thresholding, overvoltage and undervoltage detection, relay activation, lamp control, window or level comparators, and interfaces between analog measurement circuitry and TTL or MOS logic. The 200 ns response time is also suitable for moderate-speed control loops where delayed comparison would reduce system responsiveness. Designers should account for input common-mode range, output pull-up requirements, supply decoupling, and permissible output current when laying out the circuit.

Place the device close to the driven logic and route the open-collector output away from sensitive analog inputs to reduce switching transients. Use a suitable pull-up resistor for TTL or MOS interfacing, and verify that the selected load does not exceed the output sink-current limits. This page combines the principal operating characteristics, practical implementation guidance, compatible alternatives, and application context for faster component selection.

드롭인 대체품: LM211DR2G — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: LM211DR2G (동일 폼 팩터 및 풋프린트) — 차이점: Logic Compatibility, Comparator Type, Output Type, Package, Input Configuration.

Texas Instruments
Logic Compatibility: TTL and MOS compatible
Comparator Type: Single differential comparator with strobes
Output Type: Open-collector
비교 대상: LM211DR2G →
Texas Instruments
Logic Compatibility: DTL, MOS, RTL, and TTL
Comparator Type: Single high-speed differential comparator
Output Type: Open-collector / open-emitter
비교 대상: LM211DR2G →
Texas Instruments
Logic Compatibility: Compatible with most TTL and MOS circuits
Package: 8-pin TSSOP (PW)
비교 대상: LM211DR2G →

LM211D

✅ 드롭인
Texas Instruments
📦 8-pin SOIC
Single differential comparator with strobes · Differential voltage comparator · ±15 V and 5 V · Open-collector · TTL and MOS compatible · Capable of driving lamps or relays · 8-pin SOIC · -40°C to +85°C

가격 문의

데이터시트 보기 →

LM211DR2

✅ 드롭인
📦 8-pin SOIC
Same 5 V to 30 V single-supply comparator family and open-collector function; ordering suffix differs

📋 참조 대체품 (카탈로그에 없음)

LM211QDRG4

✅ 드롭인
📦 8-pin SOIC
Core 5 V to 30 V supply rating is unchanged, while the listed temperature range increases from -25 °C to +85 °C to -40 °C to +125 °C

📋 참조 대체품 (카탈로그에 없음)

LM211DR

✅ 드롭인
Texas Instruments
📦 8-pin SOIC
Single high-speed differential comparator · 115 ns · 3.5 V to 30 V · 5 V · ±15 V · Open-collector / open-emitter · DTL, MOS, RTL, and TTL · Differential

가격 문의

데이터시트 보기 →

LM211PW

✅ 드롭인
Texas Instruments
📦 8-pin SOIC
Single differential comparator · Differential voltage comparison · Open-collector and open-emitter · Yes · Wide range including ±15 V and 5 V · Differential inputs · Compatible with most TTL and MOS circuits · Capable of driving lamps or relays

가격 문의

데이터시트 보기 →

LM211DR2G 최대 정격 & 전기적 특성

Comparator Type Single general-purpose voltage comparator
Supply Voltage Range, Single Supply 5 V to 30 V
Supply Voltage Range, Split Supply ±15 V
Response Time 200 ns
동작 온도 범위 -25 °C to +85 °C
패키지 8-pin SOIC
실장 유형 Surface mount
출력 유형 Open collector
Logic Compatibility DTL, MOS, open-emitter, open-collector, RTL, and TTL
Number of Comparators 1
Input Isolation Inputs may be isolated from system ground with split supplies
Output Reference Flexibility Loads may be referenced to ground, VCC, or VEE
Output Drive Capability Capable of driving lamps and relays

LM211DR2G 8-pin soic 핀 구성 가이드

LM211DR2G(8-pin soic 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

LM211DR2G의 8-pin soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: LM211DR2G.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

LM211DR2G 적합 용도: 6 애플리케이션s: Industrial Sensor Threshold Detection, Overvoltage and Undervoltage Protection, Relay and Lamp Drive Interface, TTL and MOS Logic Interfacing, Automatic Control Level Switch, Test and Measurement Threshold Fixture.

🏭

Industrial Sensor Threshold Detection

The LM211DR2G fits industrial sensor thresholding because its 5 V to 30 V supply range supports common control rails and its 200 ns response time converts an analog crossing into a prompt logic decision. Place the sensor signal on one input and a reference voltage on the other, then use the open-collector output to signal an upper-level controller. The comparator can also drive a relay or indicator when the load current remains within the output rating. For noisy factory environments, filter the sensor node carefully and provide local supply bypassing so switching transients do not alter the threshold decision.

⚡

Overvoltage and Undervoltage Protection

A voltage supervisor built around the LM211DR2G can monitor a power rail and change state when a reference or divided feedback signal crosses the safe operating limit. The 200 ns response time allows the output state to change rapidly during a fault, while the open-collector architecture permits a pull-up to the voltage used by the protection logic. A relay, shutdown signal, or indicator can be connected when its current is within the device limit. Designers should include hysteresis to prevent repeated switching near the threshold and verify the divider tolerances across temperature.

🔧

Relay and Lamp Drive Interface

The LM211DR2G is suited to relay and lamp interfaces because its open-collector output can sink current from a pull-up load. Connect the relay coil between the pulled-up output and the appropriate supply reference, and add a flyback diode across the coil to suppress inductive switching transients. The comparator’s 200 ns response time provides rapid state changes, but the load current must remain within the output limits. For larger coils or inductive loads with high stored energy, use a driver transistor and retain the LM211DR2G as the low-current decision stage.

🖥️

TTL and MOS Logic Interfacing

The LM211DR2G provides a flexible interface between analog measurement circuits and digital logic through its open-collector output. A pull-up resistor can reference the output to the supply required by a TTL or MOS receiver, allowing the comparator to operate from a different rail than the logic it controls. This arrangement is useful in legacy industrial systems and mixed-voltage test equipment. Select the pull-up resistance using the receiving gate’s input-current and rise-time requirements, and keep the output routing away from high-impedance sensor nodes to minimize switching coupling.

⚡

Automatic Control Level Switch

The LM211DR2G can implement a simple automatic level controller for tanks, dispensers, or mechanical systems by comparing a sensed level against a reference voltage. Its 200 ns response time allows the controller to act quickly when the input crosses the threshold, while the wide 5 V to 30 V supply range supports industrial control voltages. The open-collector output may drive a relay, pilot lamp, or logic input. Add positive feedback to create hysteresis, and make sure sensor grounding and the comparator’s common-mode limits preserve reliable operation near the end points of the measurement range.

🧩

Test and Measurement Threshold Fixture

The LM211DR2G is useful in test fixtures that must convert an analog waveform or DC level into a binary pass, fail, or trigger event. Its 200 ns response time supports higher measurement bandwidth than slower general-purpose comparators, and the open-collector output can feed TTL instrumentation when pulled up to the appropriate logic supply. Use a controlled reference source for repeatable threshold decisions and account for input offset when the measurement resolution is critical. Short output traces and local decoupling help maintain measurement integrity when the comparator sits near sensitive test equipment.

What is the operating voltage range of LM211DR2G?
The LM211DR2G operates from 5 V to 30 V on a single supply and supports split supplies of ±15 V. According to the onsemi LM211 product page, the single-supply range accommodates industrial control rails and logic systems, while the split-supply capability permits comparator inputs to be isolated from system ground. The 8-pin SOIC package also makes the device suitable for conventional surface-mount PCB layouts.
What is the response time of LM211DR2G?
The LM211DR2G has a 200 ns response time, making it suitable for fast threshold decisions and moderate-speed control functions. The onsemi LM211 datasheet information identifies the device as a single high-speed voltage comparator. Its open-collector output can subsequently drive compatible TTL or MOS logic, lamps, relays, and other loads when the required pull-up and current limits are respected.
Where can I download the LM211DR2G datasheet PDF?
The LM211DR2G datasheet can be obtained from the onsemi LM211 product page or the linked PDF mirrors. The manufacturer product page is the preferred source because it identifies the device as a single comparator with a 5 V to 30 V single-supply range, ±15 V split-supply capability, and an 8-pin SOIC package. Use the manufacturer pin-description table when assigning PCB tracks and verifying output polarity.
Where can I find the LM211DR2G pinout?
The LM211DR2G pinout is documented in the onsemi LM211 datasheet under the pin-description table for the 8-pin SOIC configuration. The device includes differential inputs, the open-collector output, supply terminals, and the standard LM211 ground and strobe-related connections described by the manufacturer. Assign tracks by function and pin number from that table rather than relying on package orientation alone.
What can replace LM211DR2G?
The closest drop-in choices are LM211D, LM211DR2, LM211QDRG4, and the UMW LM211DR when their temperature, grade, and sourcing requirements match the design. Each uses the 8-pin SOIC comparator format and preserves the LM211 supply and open-collector output arrangement. The LM211QDRG4 provides a wider listed temperature range of -40 °C to +125 °C, so it is the preferred option for extended-temperature equipment.
Is LM211DR2G the same as LM211D?
LM211DR2G and LM211D are onsemi variants of the same LM211 comparator family in the 8-pin SOIC format, but their orderable packaging and qualification details should be checked for the exact assembly. LM211DR2G is the tape-and-reel order code, while LM211D is listed as the related non-reel ordering option. The electrical comparison remains based on the same 5 V to 30 V single-supply comparator architecture.
LM211DR2G vs LM211QDRG4: which is better for industrial equipment?
LM211QDRG4 is generally better for industrial equipment requiring operation from -40 °C to +125 °C, while the LM211DR2G listing specifies -25 °C to +85 °C. Both retain the 8-pin SOIC LM211 comparator format and open-collector output. Choose LM211DR2G when the commercial-temperature envelope is sufficient and choose LM211QDRG4 when temperature qualification and automotive-grade construction are required.
When should I choose LM211DR2G over another LM211 variant?
Choose LM211DR2G when the design needs a single 5 V to 30 V comparator in an 8-pin SOIC package and the -25 °C to +85 °C range is adequate. Select LM211QDRG4 for extended-temperature industrial systems, and select another family member only when its packaging, qualification, or lifecycle conditions better match the assembly. Confirm the exact pin functions and output behavior before substitution.
Is LM211DR2G suitable for driving a relay?
The LM211DR2G is suitable for relay-drive interfaces because its open-collector output can sink load current, and onsemi specifically identifies lamp and relay driving as supported uses. The relay coil must include a flyback diode, and the coil current must remain within the comparator output limits. A driver transistor or relay-driver IC is preferable when the required coil current exceeds the LM211 output rating.
How should the LM211DR2G open-collector output be connected?
Connect the LM211DR2G open-collector output to a pull-up resistor referenced to the supply used by the receiving logic. The onsemi LM211 documentation notes that loads may be referenced to ground, VCC, or VEE, enabling flexible level translation. Select the pull-up voltage and resistor to satisfy the receiver’s input-current requirements, and account for the resistor’s contribution to output rise time.
What are the key specifications of LM211DR2G that engineers should know?
The principal LM211DR2G specifications are single-comparator operation, a 5 V to 30 V single-supply range, ±15 V split-supply operation, a 200 ns response time, an open-collector output, and an 8-pin SOIC package. The listed operating-temperature range is -25 °C to +85 °C. The output is compatible with common DTL, MOS, open-emitter, open-collector, RTL, and TTL interfaces.
What is the best Texas Instruments equivalent for LM211DR2G?
The Texas Instruments LM211 is the closest manufacturer-family equivalent for a design that requires the same general high-speed comparator architecture and flexible output referencing. The onsemi LM211 product page describes operation from 5 V to 30 V or ±15 V split supplies, while the Texas Instruments LM211 page describes the LM111, LM211, and LM311 family as single high-speed comparators. Verify package pinout, output polarity, and exact limits before substituting.
Where to buy LM211DR2G online?
Use the Request a Quote form on this page to ask for LM211DR2G availability, current lead time, and order quantities. The form is the appropriate route for a quotation because market conditions and component inventory can change after a listing is indexed. For technical confirmation, use the linked onsemi LM211 datasheet and product information to verify function, package, and operating limits.
What is the price of LM211DR2G?
The current LM211DR2G quotation is available through the Request a Quote form on this page. Pricing depends on order quantity, packaging, and current component supply, so a static figure can become stale quickly. Submit the required quantity and target logistics information with the request, and use the structured price panel for the latest commercial response.
What is the lead time and stock status for LM211DR2G?
Request the current LM211DR2G lead time and stock allocation through the Request a Quote form on this page. The onsemi LM211 family is listed as active, but component availability can vary by package code and quantity. Providing the required schedule and target quantity allows procurement to confirm the most current manufacturing and distribution position.

엔지니어링 참조 데이터: LM211DR2G — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose LM211DR2G for an 8-pin SOIC design requiring a single general-purpose comparator, a 5 V to 30 V single supply, ±15 V split-supply operation, and a 200 ns response time. LM211D and LM211DR2 provide closely related onsemi ordering options when procurement or assembly requirements favor them, while UMW LM211DR is a cross-manufacturer sourcing option after pinout and qualification checks. Select LM211QDRG4 when the broader -40 °C to +125 °C temperature range is required. The Texas Instruments LM211 is appropriate when manufacturer cross-reference review confirms identical pin functions, limits, and output behavior. For every alternative, verify the manufacturer pin-description table, input common-mode range, output sink-current limit, and intended supply configuration before replacing the LM211DR2G.

대체품과의 비교

파라미터 이 제품 LM211D LM211DR2 LM211QDRG4 LM211DR LM211
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand onsemi onsemi onsemi onsemi UMW Texas Instruments
Comparator Type Single general-purpose comparator Single comparator Single comparator Differential comparator with strobe Single comparator Single high-speed comparator
Single Supply Range 5 V to 30 V 5 V to 30 V 5 V to 30 V 5 V to 30 V 5 V to 30 V 5 V to 30 V
Split Supply Capability ±15 V ±15 V ±15 V ±15 V ±15 V ±15 V
Output Configuration Open collector Open collector Open collector Open collector Open collector Open collector
Logic Compatibility DTL, MOS, open-emitter, open-collector, RTL, and TTL DTL, MOS, open-emitter, open-collector, RTL, and TTL DTL, MOS, open-emitter, open-collector, RTL, and TTL DTL, MOS, open-emitter, open-collector, RTL, and TTL DTL, MOS, open-emitter, open-collector, RTL, and TTL Compatible with most TTL and MOS circuits

주요 차별점

  • Wide single-supply operating range (vs LM211)
  • Fast threshold response (vs LM211D)
  • Commercial-temperature focus with a broader-qualified alternative available (vs LM211QDRG4)
  • Open-collector output flexibility (vs LM2904PWR)

설계 노트

Place the LM211DR2G close to the signals being compared and provide local supply bypassing with a short ground return. Keep the open-collector output away from sensitive high-impedance inputs because its transition can create coupling through board capacitance. When the comparator controls a relay or lamp, route the higher-energy load current separately from the comparator and logic traces, and place any flyback diode directly across the inductive coil.

Do not treat the open-collector output as a actively driven push-pull logic output. A pull-up resistor is required to establish the inactive high state. Select that resistor to balance receiver input current against output rise time, and connect it to the supply used by the receiving logic. Also observe the comparator’s common-mode input limits; the 5 V to 30 V supply range does not imply that every input voltage within the rail-to-rail span is valid.

Add intentional hysteresis when noise near the threshold could cause output chatter. This can be implemented with positive feedback from the output to the reference side of one input, subject to the device’s input-range and output-swing restrictions. Keep the reference network low impedance and separate from the pull-up node so switching transients do not shift the decision level.

The open-collector stage dissipates power primarily while sinking the pull-up and load current. Check the output sink-current limit and calculate worst-case dissipation using the maximum pull-up voltage and load current. The pull-up resistance should be large enough to remain within that limit but small enough to meet the receiving logic’s rise-time requirement. Bypass the supply pins at the package to keep switching events from modulating the comparator’s reference behavior.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The LM211DR2G is listed as active, but device-specific environmental and material-compliance declarations are not stated in the accessible product information. LM211QDRG4 is identified as an automotive-grade option, but that does not establish AEC-Q100 status for LM211DR2G.

관련 검색

LM211DR2G datasheet LM211DR2G datasheet pdf LM211DR2G pinout onsemi LM211DR2G LM211DR2G 5-30V comparator LM211DR2G 200ns response time LM211DR2G SOIC-8 LM211DR2G relay driver LM211DR2G vs LM211QDRG4 LM211DR2G equivalent LM211DR2G replacement LM211DR2G price LM211DR2G stock LM211DR2G open collector output

관련 부품 & 용어

onsemi LM211DR2G LM211D LM211DR2 LM211QDRG4 UMW LM211DR Texas Instruments LM211 voltage comparator analog comparator single comparator open-collector output single-supply operation split-supply operation signal conditioning industrial control overvoltage protection relay driver TTL logic MOS logic 5 V to 30 V supply 200 ns response time 8-pin SOIC SOIC package family surface-mount package
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기