LM2903ATH-13 vs LM293AM 비교
다음의 상세 나란히 비교: LM2903ATH-13 제조: Diodes Incorporated 및 LM293AM 제조: onsemi. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Diodes Incorporated
LM2903ATH-13 - Dual Differential Comparator, TSSOP-8 | Diodes Inc
LM2903ATH-13 ✓ 활성사양 비교
| 파라미터 | LM2903ATH-13 | LM293AM |
|---|---|---|
| 브랜드 | Diodes Incorporated | onsemi |
| 카테고리 | Logic ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 기능 | Dual differential voltage comparator | — |
| Number of Comparators | 2 | — |
| Supply Voltage Range (Dual) | ±1 V to ±18 V | — |
| Supply Voltage Range (Single) | 2 V to 36 V | — |
| 출력 유형 | Open collector | Open-collector, open-drain |
| Input Type | Differential (PNP input pair) | — |
| 패키지 | 8-TSSOP | 8-pin SOIC |
| 실장 유형 | Surface Mount | Surface mount |
| Product Series | LM2903 (Diodes Incorporated) | — |
| Common-Mode Range | Includes negative rail (ground-sense capable) | — |
| Application Segment | Industrial, automotive, consumer electronics | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Response Time | [DATA_NEEDED: propagation delay] | [DATA_NEEDED: comparator response time] |
| Supply Current (per comparator) | [DATA_NEEDED: supply current] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Comparator Type | — | Dual differential comparator |
| Number of Channels | — | 2 channels |
| Single-Supply Operating Range | — | Up to 36 V |
| Dual-Supply Operating Range | — | Up to ±18 V |
| Typical Low Current Drain | — | 800 µA |
| Typical Input Bias Current | — | 25 nA |
| Common-Mode Input Capability | — | Comparison of voltages near ground potential |
| Logic Compatibility | — | Compatible with TTL, MOS, and CMOS logic |
| 공급 전류 | — | [DATA_NEEDED: maximum supply current] |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Differential Input Voltage Range | — | [DATA_NEEDED: differential input voltage range] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |