LM2903PWRG3 vs LM2903YPT 비교
다음의 상세 나란히 비교: LM2903PWRG3 제조: Texas Instruments 및 LM2903YPT 제조: STMicroelectronics. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | LM2903PWRG3 | LM2903YPT |
|---|---|---|
| 브랜드 | Texas Instruments | STMicroelectronics |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Comparator Type | Dual differential comparator | Low-power dual voltage comparator |
| Number of Elements | 2 channels | — |
| 출력 유형 | Open collector | Open-collector |
| Single-Supply Voltage Range | 2 V to 36 V | +2 V to +36 V |
| Dual-Supply Voltage Range | ±1 V to ±18 V | ±1 V to ±18 V |
| Compatible Logic Families | CMOS, MOS, open-collector, and TTL | — |
| Tested Supply Voltage | 30 V | — |
| 패키지 | 8-TSSOP, 4.40 mm width | 8-pin TSSOP |
| 실장 유형 | Surface mount | Surface mount |
| Supplier Packaging | Tape and reel | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | 25 nA typical |
| Supply Current per Channel | [DATA_NEEDED: supply current per channel] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Low Voltage | [DATA_NEEDED: output low voltage] | — |
| Response Time | [DATA_NEEDED: response time] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Number of Channels | — | 2 channels |
| Channel Independence | — | 2 independent comparators |
| 공급 전류 | — | 0.4 mA, independent of supply voltage |
| Power Consumption per Comparator | — | 1 mW at +5 V |
| Input Offset Current | — | ±5 nA typical |
| Propagation Delay | — | 1.3 µs |
| Common-Mode Range | — | Rail-to-rail |
| Logic Compatibility | — | TTL, DTL, ECL, CMOS, and MOS |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: LM2903YPT AEC-Q100 qualification status] |
| Output Low Saturation Voltage | — | [DATA_NEEDED: output low saturation voltage] |