LT1039CJ vs MAX211IDB 비교
다음의 상세 나란히 비교: LT1039CJ 제조: Analog Devices 및 MAX211IDB 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | LT1039CJ | MAX211IDB |
|---|---|---|
| 브랜드 | Analog Devices | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | Unknown | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $10.99 | $1.41 |
| Product Type | Triple EIA-232 line transceiver | RS-232 Line Driver/Receiver (Transceiver) |
| Number of Drivers | 3 | 4 |
| Number of Receivers | 3 | 5 |
| 공급 전압 | Up to ±15 V | — |
| Receiver Input Voltage | ±30 V | — |
| Driver Output Voltage | RS-232 levels; outputs can be driven to ±30 V without damage | — |
| Receiver Input Impedance | 30 kΩ nominal | — |
| Receiver Input Hysteresis | 0.4 V | — |
| Shutdown Output State | High impedance | — |
| Power-Off Output State | High impedance when V+ and V− are 0 V | — |
| Driver Logic Input | TTL logic input | — |
| Receiver Logic Output | TTL or CMOS compatible | — |
| Short Circuit Protection | Fully short-circuit protected outputs | — |
| 패키지 | 18-pin DIP | SSOP-28 (DB) |
| Temperature Grade | [DATA_NEEDED: operating temperature range] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| 실장 유형 | Through-hole | Surface Mount |
| Supplier Case | DIP18 | — |
| Supply Voltage (VCC) | — | 4.5 V to 5.5 V |
| Data Rate (Max) | — | 120 kbps |
| Driver Output Swing | — | ±9 V (typ) |
| ESD Protection (HBM, RS-232 pins) | — | ±15 kV |
| Supply Current (typ, no load) | — | 1.5 mA |
| 동작 온도 범위 | — | -40 °C to +85 °C |
| Charge Pump Caps | — | 4 external 0.1 µF |
| Receiver Input Threshold | — | 0.8 V (low) / 2.4 V (high) |
| Receiver Hysteresis | — | 0.5 V (typ) |
| Standards Compliance | — | TIA/EIA-232-F |
| Input Logic Compatibility | — | TTL/CMOS |