MPVZ5004G7U vs MPVZ5004GW7U 비교
다음의 상세 나란히 비교: MPVZ5004G7U 제조: STMicroelectronics 및 MPVZ5004GW7U 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | MPVZ5004G7U | MPVZ5004GW7U |
|---|---|---|
| 브랜드 | STMicroelectronics | NXP Semiconductors |
| 카테고리 | Pressure Sensors | Pressure Sensors |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $5.73 | $6.75 |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 3.92 kPa (0 to 0.57 PSI) | 0 kPa to 3.92 kPa (0 to 0.57 psi) |
| 공급 전압 | 4.75 V to 5.25 V (5 V typical) | 5.0 V (typ) |
| 출력 전압 범위 | 1.0 V to 4.9 V (ratiometric) | — |
| 출력 유형 | Analog Voltage (ratiometric) | Analog voltage, ratiometric |
| Sensitivity | 1.0 V/kPa (typical, ratiometric to 5 V) | approx. 1.0 V / kPa |
| 동작 온도 | 0C to +85C | 0 °C to 85 °C |
| Accuracy (Linearity) | +/-1.5% of full-scale span (typical) | — |
| 패키지 / 케이스 | 8-DIP Module (axial port) | — |
| 실장 유형 | Through-Hole | Through-Hole (DIP module with tube port) |
| Port Style | Axial pressure port with vent | — |
| Output Impedance | [DATA_NEEDED: output impedance] | — |
| Response Time | [DATA_NEEDED: response time] | — |
| Pressure Port | Vented gauge (back-side referenced to ambient) | Male 0.22" (5.59 mm) tube, single axial |
| RoHS 상태 | Compliant | [DATA_NEEDED: confirm from datasheet] |
| Moisture Sensitivity | Non-condensing environments only | — |
| Output Voltage Span | — | 1.0 V to 4.9 V (at 5 V excitation) |
| Output Voltage at 0 kPa | — | 1.0 V typ |
| 공급 전류 | — | 4 mA typ (per datasheet family) |
| Accuracy | — | [DATA_NEEDED: linearity/error %] |
| Storage Temperature | — | [DATA_NEEDED: storage temperature range] |
| 패키지 | — | 8-DIP Module (Case 1560-02) |
| Technology | — | Piezoresistive MEMS, monolithic silicon |
| Signal Conditioning | — | On-chip amplifier, temperature-compensated, calibrated |
| Media Compatibility | — | Non-corrosive dry gases (air) |