MPX2010DP vs MPX2010GP 비교
다음의 상세 나란히 비교: MPX2010DP 제조: NXP Semiconductors 및 MPX2010GP 제조: STMicroelectronics. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
STMicroelectronics
MPX2010GP - 10 kPa Vented Gauge Pressure Sensor | STMicroelectronics
MPX2010GP ✓ 활성사양 비교
| 파라미터 | MPX2010DP | MPX2010GP |
|---|---|---|
| 브랜드 | NXP Semiconductors | STMicroelectronics |
| 카테고리 | Pressure Sensors | Pressure Sensors |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $8.50 | $7.20 |
| 센서 유형 | Differential Pressure Sensor | — |
| Pressure Range | 0 to 10 kPa (0 to 1.45 PSI) | — |
| Technology | Piezoresistive (silicon strain gauge bridge) | — |
| 출력 유형 | Analog voltage, Wheatstone bridge (mV level) | — |
| Typical Full-Scale Span | 25 mV at 10 V excitation | — |
| Zero Pressure Offset | 0 mV nominally (±1.0 mV max) | — |
| 공급 전압 | 10 V DC typical (max 16 V) | — |
| Linearity | ±0.05% (typ) | [DATA_NEEDED: linearity %FS] |
| Temperature Compensation | 0 °C to +85 °C (on-chip) | On-chip, calibrated |
| 동작 온도 | -40 °C to +125 °C | — |
| Response Time | 1.0 ms (typical) | 1 ms typical |
| Maximum Overpressure | 75 kPa | — |
| Burst Pressure | 200 kPa | — |
| Port Configuration | Dual ports (differential), 0.19 inch / 4.93 mm tubes | — |
| Package / Mounting | 4-SIP Module (through-hole with axial tubes) | — |
| Media Compatibility | Dry air or non-corrosive gas | Dry gases (silicone gel isolation) |
| RoHS 상태 | Compliant | Compliant |
| Pressure Type | — | Vented Gauge |
| Operating Pressure Range | — | 0 kPa to 10 kPa (0 to 1.45 PSI) |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Sensitivity (Full-Scale Span) | — | 25 mV typical at 10 V excitation |
| 출력 전압 범위 | — | 0 mV to 25 mV (10 V supply) |
| Offset (Zero Pressure) | — | 0 mV nominal |
| Supply Voltage (Excitation) | — | 10 V DC typical (max per datasheet) |
| 공급 전류 | — | 6 mA DC typical |
| 동작 온도 범위 | — | -40 C to +125 C |
| Storage Temperature Range | — | -40 C to +125 C |
| Port Style | — | Male, 0.19 inch (4.93 mm) tube, vented gauge |
| 패키지 / 케이스 | — | 4-SIP Module (Case 344B-01) |
| 실장 유형 | — | Through-Hole (SIP) |