MPXHZ6115A6T1 vs MPXH6115AC6U 비교
다음의 상세 나란히 비교: MPXHZ6115A6T1 제조: NXP Semiconductors 및 MPXH6115AC6U 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
NXP Semiconductors
MPXHZ6115A6T1 - 15-115 kPa Absolute Pressure Sensor | NXP | 8-SOIC
MPXHZ6115A6T1 ✓ 활성사양 비교
| 파라미터 | MPXHZ6115A6T1 | MPXH6115AC6U |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | Pressure Sensors | Pressure Sensors |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $10.85 | $5.75 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) |
| Maximum Overpressure | 400 kPa (58.02 PSI) | — |
| 출력 유형 | Analog Voltage | Analog, ratiometric to VCC |
| 출력 전압 범위 | 0.2 V to 4.7 V (at 5 V supply) | 0.2 V to 4.7 V (at 5 V supply) |
| 공급 전압 | 5 V (typical, [DATA_NEEDED: full min/max range]) | 4.75 V to 5.25 V (5 V typical) |
| Accuracy | ±1.5% (0 °C to 85 °C) | — |
| Temperature Compensation Range | -40 °C to +125 °C | — |
| 동작 온도 범위 | -40 °C to +125 °C | -40 C to +125 C |
| 패키지 | 8-SOIC (0.295", 7.50 mm Width), Surface Mount | 8-SOIC (0.335 inch, 8.50 mm width) Top Port |
| Port Style | No Port (media-resistant PPS surface mount) | — |
| Sensor Technology | MEMS silicon strain-gauge with bipolar op-amp signal conditioning | — |
| 실장 유형 | Surface Mount (PPS thermoplastic) | Surface Mount |
| RoHS 상태 | [DATA_NEEDED: RoHS compliance status] | Compliant |
| Media Compatibility | Media-resistant PPS package; dry gas media recommended | — |
| Sensitivity | — | 45.9 mV/kPa (typical) |
| Port Type | — | Male - 0.13 inch (3.3 mm) Tube, Top |
| Compensated Temperature Range | — | 0 C to +85 C |
| Signal Conditioning | — | On-chip bipolar op-amp + thin-film resistor network |
| Technology | — | Piezoresistive MEMS, monolithic silicon |
| Port Orientation | — | Top-side vertical |
| MSL 레벨 | — | [DATA_NEEDED: MSL rating] |