MPXV5004GP vs MPVZ5004GW7U 비교

다음의 상세 나란히 비교: MPXV5004GP 제조: NXP Semiconductors 및 MPVZ5004GW7U 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

NXP Semiconductors
MPXV5004GP MPXV5004GP - 0-3.92 kPa Gauge Pressure Sensor | NXP | SO-8

MPXV5004GP - 0-3.92 kPa Gauge Pressure Sensor | NXP | SO-8

MPXV5004GP ✗ 단종
NXP Semiconductors
MPVZ5004GW7U MPVZ5004GW7U - 3.92kPa Pressure Sensor, 5V, SOP-8 | NXP

MPVZ5004GW7U - 3.92kPa Pressure Sensor, 5V, SOP-8 | NXP

MPVZ5004GW7U ✓ 활성

사양 비교

파라미터 MPXV5004GP MPVZ5004GW7U
브랜드 NXP Semiconductors NXP Semiconductors
카테고리 Pressure Sensors Pressure Sensors
수명 주기 상태 수명 종료 활성
재고 상태 In Stock In Stock
단가 (USD) $8.20 $6.75
Pressure Type Gauge (vented) Vented Gauge
Pressure Range 0 kPa to 3.92 kPa (0 to 0.57 PSI) —
공급 전압 4.75 V to 5.25 V (nominal 5.0 V) 5.0 V (typ)
공급 전류 10 mA (typical) 4 mA typ (per datasheet family)
출력 전압 범위 1.0 V to 4.9 V —
Sensitivity 1.0 V/kPa (nominal) approx. 1.0 V / kPa
Offset Voltage at 0 kPa 1.0 V (nominal) —
Accuracy [DATA_NEEDED: accuracy %FS over temperature] [DATA_NEEDED: linearity/error %]
동작 온도 범위 0 C to +85 C —
Storage Temperature -40 C to +125 C [DATA_NEEDED: storage temperature range]
Response Time [DATA_NEEDED: response time ms] —
패키지 8-pin SOP (SOP-8), side port 8-DIP Module (Case 1560-02)
Port Type Side port, male 0.13" (3.17 mm) tube —
실장 유형 Surface Mount Through-Hole (DIP module with tube port)
AEC-Q100 Qualified (automotive grade) —
RoHS 상태 Compliant [DATA_NEEDED: confirm from datasheet]
Technology Piezoresistive MEMS with on-chip ASIC conditioning Piezoresistive MEMS, monolithic silicon
Operating Pressure Range — 0 kPa to 3.92 kPa (0 to 0.57 psi)
Pressure Port — Male 0.22" (5.59 mm) tube, single axial
출력 유형 — Analog voltage, ratiometric
Output Voltage Span — 1.0 V to 4.9 V (at 5 V excitation)
Output Voltage at 0 kPa — 1.0 V typ
동작 온도 — 0 °C to 85 °C
Signal Conditioning — On-chip amplifier, temperature-compensated, calibrated
Media Compatibility — Non-corrosive dry gases (air)

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청