MSP430F412IPM vs MSP430F417IPM 비교
다음의 상세 나란히 비교: MSP430F412IPM 제조: Texas Instruments 및 MSP430F417IPM 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
MSP430F412IPM - 8MHz 16-Bit Ultra-Low-Power MCU | Texas Instruments
MSP430F412IPM ✓ 활성사양 비교
| 파라미터 | MSP430F412IPM | MSP430F417IPM |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Microcontrollers | Microcontrollers |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | 16-bit ultra-low-power RISC microcontroller | — |
| 최대 클록 주파수 | 8 MHz | 8 MHz |
| Minimum Instruction Cycle Time | 125 ns | — |
| Flash Memory | 4 KB (4K x 8) | — |
| SRAM | 256 bytes | 1 KB |
| CPU Architecture | 16-bit RISC | — |
| Register Width | 16-bit | — |
| Timer | 16-bit Timer_A | — |
| Comparator | Integrated comparator | — |
| LCD Segment Support | 96 segments | — |
| Low-Power Modes | 5 modes | — |
| 패키지 | 64-pin LQFP (PM), 10 mm x 10 mm | 64-pin LQFP (PM, 10x10 mm) |
| 실장 유형 | Surface mount | Surface Mount |
| 동작 온도 범위 | -40 °C to +85 °C | — |
| Ordering Code | PM | — |
| Flash Wait States | [DATA_NEEDED: Flash wait-state configuration] | — |
| Supply Voltage Range | [DATA_NEEDED: Supply voltage range] | 1.8 V to 3.6 V |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | Compliant (Green Package) |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Core Architecture | — | MSP430 CPU16 (RISC, 16-bit) |
| Series | — | MSP430x4xx |
| Instruction Cycle Time | — | 125 ns |
| Program Memory (Flash) | — | 32 KB (32K x 8 + 256B) |
| Active Mode Current (1 MHz, 2.2 V) | — | 200 µA |
| Standby Mode Current | — | 0.7 µA |
| Off Mode Current (RAM Retention) | — | 0.1 µA |
| Wake-Up Time from Standby | — | < 6 µs |
| Power-Saving Modes | — | 5 |
| Clock System | — | FLL+ (Frequency-Locked Loop) |
| LCD Driver | — | 96 segments |
| Timers | — | 16-bit Timer_A |
| Analog Comparator | — | Yes |
| Scan Interface (Scan IF) | — | Yes |
| GPIO Pins | — | 48 |
| 동작 온도 | — | -40°C to +85°C (Industrial) |