THS1215CPWRG4 vs THS1215IDW 비교
다음의 상세 나란히 비교: THS1215CPWRG4 제조: Texas Instruments 및 THS1215IDW 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
THS1215CPWRG4 - 12-Bit 15 MSPS Low-Power ADC | Texas Instruments
THS1215CPWRG4 ✓ 활성사양 비교
| 파라미터 | THS1215CPWRG4 | THS1215IDW |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | ADC/DAC | ADC/DAC |
| 수명 주기 상태 | 활성 | 활성 |
| 분해능 | 12 bits | 12 bit |
| Sample Rate | 15 MSPS | — |
| Number of Inputs | 1 input, pipelined | — |
| 공급 전압 | 3.3 V (single supply) | 3.3 V |
| Analog Input Range | -2 V to +2 V (differential / single-ended) | — |
| Input Configuration | Single-ended, single-ended with offset, or differential (Mode 1 gain = 1.0; Mode 2 gain = 0.5) | Single-ended, single-ended with offset, or differential |
| Digital Interface | Parallel CMOS, binary output code | — |
| Voltage Reference | Internal (user-selectable ranges) | — |
| Power-Down Mode | Yes (integrated) | — |
| Out-of-Range Indicator | Yes | Yes |
| Architecture | CMOS pipelined | — |
| 동작 온도 | -40C to +85C | — |
| 패키지 | 28-pin TSSOP (PW) | 28-SOIC (DW), PDSO28 |
| 실장 유형 | Surface Mount | Surface mount |
| MSL 레벨 | [DATA_NEEDED: MSL level] | — |
| RoHS 상태 | Compliant (G4 suffix denotes lead-free / RoHS, per TI nomenclature) | — |
| Power Consumption | [DATA_NEEDED: typical power in mW at 15 MSPS] | [DATA_NEEDED: active and power-down current] |
| 샘플링 속도 | — | 15 MSPS |
| Number of Channels | — | 1 |
| Conversion Architecture | — | Pipelined |
| Internal Voltage Reference | — | Yes |
| Power-Down Function | — | Yes |
| 출력 유형 | — | Parallel digital output |
| Operating Voltage Class | — | 3.3 V |
| Temperature Grade | — | Industrial |
| Package Body Width | — | 7.50 mm (0.295 inch) |
| Terminal Form | — | Gull wing |
| Number of Terminals | — | 28 |
| Effective Number of Bits | — | [DATA_NEEDED: ENOB value] |
| 입력 전압 범위 | — | [DATA_NEEDED: analog input voltage range] |
| 동작 온도 범위 | — | [DATA_NEEDED: minimum and maximum operating temperature] |
| Analog-to-Digital Transfer Delay | — | [DATA_NEEDED: acquisition and conversion timing] |
| Input Impedance | — | [DATA_NEEDED: analog input impedance] |
| 기준 전압 | — | [DATA_NEEDED: internal reference output voltage] |
| Signal-to-Noise Ratio | — | [DATA_NEEDED: SNR by input mode and sampling rate] |
| Integral Nonlinearity | — | [DATA_NEEDED: INL error] |
| Differential Nonlinearity | — | [DATA_NEEDED: DNL error] |