XC9572-10PC44I vs XC9572-15PC44I 비교

다음의 상세 나란히 비교: XC9572-10PC44I 제조: AMD 및 XC9572-15PC44I 제조: Xilinx. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

AMD
XC9572-10PC44I XC9572-10PC44I - 72-Macrocell 5V CPLD | AMD

XC9572-10PC44I - 72-Macrocell 5V CPLD | AMD

XC9572-10PC44I Obsolete
Xilinx
XC9572-15PC44I XC9572-15PC44I - 72-Macrocell 15 ns CPLD | Xilinx

XC9572-15PC44I - 72-Macrocell 15 ns CPLD | Xilinx

XC9572-15PC44I ✗ 단종

사양 비교

파라미터 XC9572-10PC44I XC9572-15PC44I
브랜드 AMD Xilinx
카테고리 FPGA & CPLD FPGA & CPLD
수명 주기 상태 Obsolete 수명 종료
Device Type Complex Programmable Logic Device (CPLD) In-system programmable CPLD
Macrocell Count 72 macrocells 72 macrocells
Usable Gate Count 1,600 gates —
User I/O Count 34 I/O —
Function Block Count 8 function blocks —
Function Block Architecture 8 blocks of 36V18 —
Speed Grade 10 ns —
Pin-to-Pin Logic Delay 7.5 ns —
Maximum System Clock Frequency 66.7 MHz —
Counter Frequency Up to 125 MHz —
Supply Voltage Range 4.5 V to 5.5 V —
Nominal Supply Voltage 5 V —
Process Technology 0.5 µm Advanced CMOS —
Configuration Technology 5 V Fast FLASH in-system programming 5 V Fast FLASH
Programming Endurance At least 10,000 program/erase cycles —
동작 온도 범위 -40°C to +85°C —
Temperature Grade Industrial Industrial
패키지 44-pin PLCC 44-LCC J-lead (PLCC), square
실장 유형 Surface mount —
Parallel Programming Support Supported —
RoHS 상태 Non-compliant [DATA_NEEDED: RoHS compliance status]
Lead-Free Status Contains lead [DATA_NEEDED: lead-free status]
Programming Pinout [DATA_NEEDED: complete 44-pin PLCC pin assignment] —
Architecture — Advanced CMOS 5 V Fast FLASH
Propagation Delay — 15 ns speed grade
Family Pin-to-Pin Logic Delay — 5 ns
Family Maximum Counting Frequency — 125 MHz
I/O Line Count — 34 I/O
Maximum Supply Voltage — 5.5 V
Programming Support — In-system programming and parallel programming of multiple XC9500 devices
Package Code — QCCJ
Terminal Count — 44 terminals
Terminal Form — J-bend
Transient Pin Overshoot — Up to +7.0 V for less than 10 ns with forcing current limited to 200 mA
Transient Pin Undershoot — Down to -2.0 V for less than 10 ns with forcing current limited to 200 mA
Maximum DC Undershoot Below Ground — Limited to either 0.5 V or 10 mA, whichever is easier to achieve
External I/O Voltage Limit — May not exceed VCCINT by more than 4.0 V
REACH Status — [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청