5M40ZE64C5N - MAX V 40 LE CPLD, 7.5ns, 64-EQFP | Intel / Altera
부품 번호: 5M40ZE64C5N ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $8.5 | $8.50 |
| 10 | $7.65 | $76.50 |
| 100 | $6.5 | $650.00 |
| 500 | $5.45 | $2,725.00 |
| 1,000 | $4.85 | $4,850.00 |
5M40ZE64C5N 개요
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL/GAL-style macrocells with a centralized interconnect fabric. Positioned in the programmable logic hierarchy below FPGAs but above simple SPLDs, MAX V CPLDs offer instant-on behavior (sub-millisecond configuration), deterministic timing, and high-drive I/Os that drive 5.0 V backplanes. They sit within the broader taxonomy of programmable logic devices (PLDs) > non-volatile logic > glue-logic replacement ICs.
Key features include 1.8 V core operation with multi-voltage I/O support (1.5 V, 1.8 V, 2.5 V, 3.3 V LVCMOS/LVTTL), in-system programmability via JTAG (IEEE 1149.1), and on-chip voltage regulation requiring only a single 3.3 V external supply. The Flash-based configuration eliminates external boot memory and supports 100% factory-tested fault coverage.
Architecturally, the 5M40ZE64C5N uses Altera's classic Lab/Local FastTrack interconnect routing with 4-input look-up tables per LE, product-term allocation across macrocells, and a user Flash memory block (UFM) that provides non-volatile user storage. The 7.5 ns tPD1 timing makes it ideal for high-speed address decoding, bus interface logic, and asynchronous state-machine replacement in mixed-voltage systems.
Typical applications include address decoding and bus interface bridging in industrial controllers, I/O expansion and level translation in telecom line cards, glue-logic consolidation in medical instruments, and power-sequencer or reset-distribution networks in networking switches. The wide I/O voltage range makes it a flexible companion to legacy 5 V MCUs that still require 3.3 V or 1.8 V peripherals.
When designing with this device, plan the I/O bank assignments carefully because each bank has a fixed VCCIO reference. Use the Quartus Prime design suite for synthesis, fitting, and in-system programming; the JTAG chain can also be used for boundary-scan testing on production boards.
This page synthesizes distributor pricing, drop-in same-package MAX V alternatives, and practical design notes not consolidated on the manufacturer datasheet cover page, helping procurement and design engineers evaluate 5M40ZE64C5N for new designs or as a long-lead-time substitute.
드롭인 대체품: 5M40ZE64C5N — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: 5M40ZE64C5N (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature, Programming Interface, Configuration Memory, Logic Elements (LE).
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
5M40ZE64C4N
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$1.7 / 개
데이터시트 보기 →5M40ZE64A5N
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$2.18 / 개
데이터시트 보기 →5M160ZE64C5N
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$4.95 / 개
데이터시트 보기 →5M160ZE64C4N
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$4.3 / 개
데이터시트 보기 →5M160ZE64A5N
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$6.2 / 개
데이터시트 보기 →5M40ZE64C5N 최대 정격 & 전기적 특성
| Series | MAX V |
| Device Type | CPLD - Complex Programmable Logic Device |
| Logic Elements (LE) | 40 |
| Macrocells | 32 |
| Maximum User I/Os | 54 |
| Propagation Delay (tPD1) | 7.5 ns |
| Maximum Internal Frequency | 118.3 MHz |
| Configuration Memory | Flash (non-volatile) |
| Supply Voltage - Core | 1.8 V (internal) |
| External Supply Voltage | 3.3 V |
| I/O Voltage Support | 1.5 V / 1.8 V / 2.5 V / 3.3 V LVCMOS, LVTTL |
| Programming Interface | JTAG (IEEE 1149.1) - in-system programmable |
| 패키지 | 64-pin EQFP (Plastic Enhanced Thin QFP) with exposed thermal pad |
| 실장 유형 | Surface Mount |
| 동작 온도 | 0C to +85C (commercial) |
| User Flash Memory (UFM) | Yes (on-chip non-volatile) |
5M40ZE64C5N 64-pin eqfp (plastic enhanced thin qfp) with exposed thermal pad 핀 구성 가이드
5M40ZE64C5N(64-pin eqfp (plastic enhanced thin qfp) with exposed thermal pad 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: 5M40ZE64C5N.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
5M40ZE64C5N 적합 용도: 6 애플리케이션s: Address Decoding and Bus Interface Bridging, I/O Expansion and Level Translation, Industrial Glue Logic Consolidation, Power Sequencing and Reset Distribution, Legacy 5 V System Modernization, State Machine and Protocol Conversion.
Address Decoding and Bus Interface Bridging
The 5M40ZE64C5N fits address decoding and bus-interface bridging because its 7.5 ns pin-to-pin propagation delay (tPD1) and 118.3 MHz internal frequency comfortably decode a 50-100 MHz processor or memory bus without inserted wait states. Its 32 macrocells provide ample product-term capacity for chip-select and byte-enable generation across multiple memory banks. Placed between a CPU and its memory/ASIC peripherals, the CPLD replaces discrete 74-series glue logic with a single Flash-programmable device, reducing board area and BOM cost. The multi-voltage I/O banks (1.5/1.8/2.5/3.3 V) allow direct connection to processors and peripherals running on different supply rails, eliminating external level translators and improving signal integrity on the decoded strobes.
추천
I/O Expansion and Level Translation
The 5M40ZE64C5N serves as an I/O expansion and level-translation bridge between mixed-voltage ASICs and processors. Each of its I/O banks supports an independent VCCIO voltage (1.5/1.8/2.5/3.3 V), so a 1.8 V processor GPIO can directly drive a 3.3 V peripheral or vice versa through the CPLD's bidirectional I/O cells. With 54 user I/Os available in the 64-pin EQFP package, it can expand a small microcontroller into a multi-bank mixed-signal system. The instant-on Flash configuration ensures the level-translation paths are active within microseconds of power-up, critical for systems where the MCU is held in reset until the I/O voltages are stable.
추천
Industrial Glue Logic Consolidation
The 5M40ZE64C5N consolidates 5 to 15 discrete 74-series logic gates into a single programmable device in industrial PLC and motor-drive controllers. Its 32 macrocells replace latches, flip-flops, monostable multivibrators, and combinational decoders with a Flash-programmable equivalent that fits on a 64-pin EQFP land pattern. The non-volatile configuration eliminates PROM failures common in high-vibration factory-floor environments, and the instant-on behavior lets I/O signals settle before the host MCU boots. Engineers can re-spin logic revisions by re-programming via JTAG on the production line, avoiding board respins and reducing time-to-market for industrial customers.
추천
Power Sequencing and Reset Distribution
The 5M40ZE64C5N is ideal for power-sequencing and reset-distribution networks in networking switches and telecom line cards. Its deterministic 7.5 ns timing lets designers build daisy-chained PG (power-good) and RESET signal chains that bring ASICs, FPGAs, and PHYs up in the correct order. Each of the 54 user I/Os can be configured with a weak pull-up, bus-keeper, or open-drain mode, matching the diverse reset-network requirements of multi-rail systems. The on-chip User Flash Memory (UFM) can store board-specific calibration data or MAC addresses alongside the configuration image, eliminating an external EEPROM from the BOM and reducing bill-of-material cost.
추천
Legacy 5 V System Modernization
The 5M40ZE64C5N bridges new low-voltage processors to legacy 5 V peripherals in medical instruments and factory automation systems. Its LVCMOS/LVTTL I/O banks interface directly with 3.3 V or 1.8 V modern MCUs while the programmable logic provides the level-shifting behavior to drive 5 V-tolerant signal chains. The 32 macrocells can implement Schmitt-trigger input conditioning and debounce logic for noisy mechanical switches and relays common in industrial control panels. Replacing legacy 74LS/74HC TTL gates with a single CPLD reduces standby current and board area while keeping the legacy 5 V peripheral interface fully functional.
추천
State Machine and Protocol Conversion
The 5M40ZE64C5N implements compact finite state machines and lightweight protocol converters such as I2C-to-parallel, SPI-to-GPIO, or UART-to-keyscan. Each of the 40 Logic Elements contains a 4-input LUT and a programmable register, well-suited for Moore or Mealy state machines with 8 to 16 states. The 7.5 ns tPD1 enables bit-rate matching at standard SPI speeds up to 50 MHz. Combined with the on-chip JTAG, designers can add production-testable logic that simplifies board bring-up and boundary-scan coverage without external test fixtures, a useful feature for low-volume medical and industrial products.
추천
추천 제품 요약
엔지니어링 참조 데이터: 5M40ZE64C5N — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | 5M40ZE64C4N | 5M40ZE64A5N | 5M160ZE64C5N | 5M160ZE64C4N | 5M160ZE64A5N |
|---|---|---|---|---|---|---|
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Package | 64-pin EQFP | 64-pin EQFP - same | 64-pin EQFP - same | 64-pin EQFP - same | 64-pin EQFP - same | 64-pin EQFP - same |
| Logic Elements | 40 | 40 | 40 | 160 | 160 | 160 |
| Macrocells | 32 | 32 | 32 | 128 | 128 | 128 |
| User I/Os | 54 | 54 | 54 | 54 | 54 | 54 |
| Propagation Delay (tPD1) | 7.5 ns | 7.5 ns | 7.5 ns | 7.5 ns | 7.5 ns | 7.5 ns |
| Max Internal Frequency | 118.3 MHz | 118.3 MHz | 118.3 MHz | 118.3 MHz | 118.3 MHz | 118.3 MHz |
| Series | MAX V | MAX V | MAX V | MAX V | MAX V | MAX V |
주요 차별점
- Non-volatile Flash configuration eliminates external boot PROM (vs 5M160ZE64C5N)
- Lowest 5M40ZE64 density in the 64-EQFP package (vs 5M160ZE64C5N)
- Independent VCCIO banks for mixed-voltage designs (vs XC9536XL-64VQG64 (Xilinx XC9500XL))
설계 노트
The 5M40ZE64C5N requires a single 3.3 V external supply; the on-chip voltage regulator generates the 1.8 V core voltage internally. Decouple VCCINT and each VCCIO bank with 0.1 uF ceramic capacitors placed within 5 mm of the supply pins, and add a bulk 10 uF tantalum or ceramic capacitor at the regulator input. Each I/O bank has its own VCCIO pin; do not tie VCCIO banks together unless the design specifies the same voltage for the entire bank group.
Use a four-layer PCB with a dedicated ground plane and a power plane cut to avoid crossing noisy signal traces above split power regions. Route JTAG signals (TCK, TMS, TDI, TDO) away from high-speed switching signals; keep TCK trace length under 75 mm to meet IEEE 1149.1 timing. Connect the exposed thermal pad on the 64-pin EQFP package to the ground plane with multiple thermal vias (0.3 mm drill, 0.6 mm pad, 1.0 mm pitch) to improve heat dissipation during high-I/O-toggle operation.
Do not exceed the maximum I/O per bank current limit of approximately 25 mA per pin or 100 mA per bank - distribute high-current loads across multiple banks. Leave JTAG pins unused but pulled to a defined state (TDI/TMS pulled up, TCK pulled down through 10 kohm) if JTAG is not used to prevent spurious configuration events. The User Flash Memory (UFM) shares configuration logic; do not access the UFM during in-system programming without first pausing the JTAG state machine.
규정 준수 정보
RoHS and REACH compliance not explicitly stated in the verified web data; AEQ-Q100 not applicable for commercial-grade CPLD. Refer to manufacturer datasheet for confirmation.
