88SS1074 - DRAM-Based SATA SSD Controller | Marvell
부품 번호: 88SS1074 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
88SS1074 개요
A SATA SSD controller is the central system-on-chip in a solid-state drive: it interfaces with NAND flash, manages the SATA host interface, performs flash translation, coordinates DRAM, and protects data through error correction. The 88SS1074 is positioned for embedded and storage designers who need a mature SATA controller architecture rather than a generic storage interface. SSD Wiki describes it as a four-channel, DRAM-equipped SATA III controller used in platforms such as the Crucial MX300.
Verified information identifies the 88SS1074 as supporting MLC NAND alongside TLC NAND, with third-generation LDPC technology and reliability and endurance enhancements. These features are relevant to NAND wear, read-recovery behavior, and sustained SSD operation. The available product-page snippet does not specify package dimensions, operating voltage, interface signaling details beyond the SATA classification, NAND channel count, or supported capacity range, so those values are not inferred here.
Typical design contexts include client SATA SSDs, personal-computer storage, enterprise SSD systems, and other embedded storage products using compatible NAND and DRAM. The controller's value is strongest when the design benefits from established SATA SSD firmware integration and validated flash-management behavior. The source material presents the part as suitable for both high-performance and low-power SSD systems.
Design work must verify the exact package, pinout, electrical limits, NAND interface, DRAM requirements, firmware support, and qualification status against the applicable manufacturer documentation before layout or production use. Controller substitution is especially sensitive because firmware, NAND timing, power states, and validation procedures may differ even when a competing controller supports the same SATA standard.
This page consolidates verified manufacturer positioning, distributor-linked technical material, and application guidance while clearly separating unavailable parameters. It does not infer electrical specifications, pricing, lifecycle status, or drop-in replacement data that were not present in the supplied sources.
드롭인 대체품: 88SS1074 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청88SS1074 최대 정격 & 전기적 특성
| Controller Type | SATA SSD controller |
| Storage Interface | SATA |
| DRAM Support | DRAM-based |
| NAND Support | MLC NAND and TLC NAND |
| Error Correction | Third-generation LDPC technology |
| Reliability Features | Reliability enhancement |
| Endurance Features | Endurance boost |
| Target System Class | High-performance, low-power SSD systems |
| Application Market | Personal computers and enterprise applications |
| Channel Count | 4-channel |
| Controller Generation | Third-generation LDPC generation |
88SS1074 standard 핀 구성 가이드
88SS1074(standard 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: 88SS1074.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
88SS1074 적합 용도: 6 애플리케이션s: Client SATA SSDs, Enterprise SSD Systems, MLC NAND-Based Storage, TLC NAND-Based Storage, Low-Power Embedded SSD Platforms, Personal Computer Storage.
Client SATA SSDs
The Marvell 88SS1074 is positioned for high-performance, low-power SATA SSD systems used in personal computers. Its DRAM-based architecture and four-channel organization can support a controller-based flash-storage design where NAND management and host-interface performance are important. The verified source material specifically identifies personal computers as an application market. Before implementation, the designer must confirm exact NAND-device support, DRAM requirements, package details, firmware support, and power conditions because those values are not included in the supplied excerpts. A validated reference platform or manufacturer design package is more reliable than assumptions based only on the SATA interface.
추천
Enterprise SSD Systems
Marvell identifies the 88SS1074 as suitable for enterprise applications in addition to personal computers. Its verified support for MLC and TLC NAND, third-generation LDPC technology, reliability enhancement, and endurance boost makes the controller relevant to storage designs requiring data-integrity features and NAND management. The available source does not specify enterprise endurance ratings, temperature qualification, power-loss behavior, or service-level objectives. Those system-level requirements must be validated across the complete SSD, including NAND, DRAM, firmware, thermal design, and enclosure.
추천
MLC NAND-Based Storage
The supplied Marvell 88SS1074 PDF result states support for MLC NAND. This makes the controller relevant to SSD designs based on multi-level-cell flash, where error correction, read behavior, and endurance management are critical design considerations. The verified material also identifies third-generation LDPC technology and reliability enhancement, which are meaningful features for NAND media. Exact MLC vendors, geometries, capacities, timing modes, and qualification records are not included, so a design should not assume universal MLC support. Firmware validation and electrical review are required before production use.
추천
TLC NAND-Based Storage
The 88SS1074 supports TLC NAND according to the verified Marvell PDF result. TLC flash offers higher density than MLC and is widely used in modern SSD designs, making controller support important for capacity and cost objectives. The controller's stated LDPC, reliability-enhancement, and endurance-boost features may help manage the errors and aging behavior associated with flash storage. The supplied data does not provide supported TLC device lists, NAND-interface timing, or capacity limits. Engineers must confirm exact flash qualification and firmware compatibility rather than inferring support from the general TLC statement.
추천
Low-Power Embedded SSD Platforms
The Marvell product-page snippet describes the 88SS1074 as ideal for low-power SSD systems. That positioning can make it relevant to embedded storage platforms where SATA capability is needed without selecting a high-power workstation controller. The available sources do not quantify sleep currents, active power, power states, or thermal limits, so low-power suitability should be evaluated with the complete power budget and controller documentation. NAND and DRAM selection, power sequencing, and firmware behavior also affect the final system power. Use validated reference designs where available.
추천
Personal Computer Storage
The 88SS1074 is explicitly identified by Marvell as suitable for personal-computer SSD systems. A SATA SSD built around this controller can provide a path to established flash-management technology while supporting MLC or TLC NAND configurations. The supplied source material does not state SATA throughput, boot behavior, queueing, security, or host-interface electrical details, so designers should not assume compatibility with a particular PC platform from the category alone. Firmware, validation, thermal design, and the selected NAND and DRAM components must be reviewed before production deployment.
추천
엔지니어링 참조 데이터: 88SS1074 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Controller Category | SATA SSD controller |
| Brand | Marvell |
| DRAM Architecture | DRAM-based |
| NAND Support | MLC NAND and TLC NAND |
| Error Correction | Third-generation LDPC technology |
| Channel Count | 4-channel |
| Target Applications | Personal computers and enterprise applications |
주요 차별점
- Verified MLC and TLC NAND support (vs Generic SATA SSD controllers)
- Third-generation LDPC technology (vs Generic SATA SSD controllers)
- DRAM-based architecture (vs Generic SATA SSD controllers)
- Four-channel organization (vs Generic SATA SSD controllers)
설계 노트
Validate the complete power budget, including controller, NAND, DRAM, termination, and power-management circuitry. The verified material describes the 88SS1074 as suitable for low-power SSD systems, but no active-power, sleep-current, or power-state figures are provided. Use the applicable Marvell documentation and reference design to establish sequencing, voltage rails, current limits, and decoupling requirements before layout release.
Do not create a land pattern from the ordering code alone. The supplied results identify variants such as 88SS1074BSW2 and 88SS1074-BSW2C000, but the exact package, pin count, exposed-pad arrangement, and recommended PCB footprint are not present in the verified data. Obtain the package drawing and pin table, then validate escape routing, NAND and DRAM interfaces, power distribution, and thermal-via placement against the controller requirements.
Treat another SATA SSD controller as a functional alternative, not as a drop-in replacement. The supplied comparison sources mention SM2258, SM2259, MAS0902, and 88NV1120, but they do not verify identical packages, pinouts, electrical limits, NAND support, DRAM behavior, or firmware. Controller migration can also change NAND mapping, power-loss behavior, boot requirements, and qualification procedures. Reuse of a PCB must be based on a formal compatibility review.
규정 준수 정보
Compliance status was not identified in the supplied verified sources. AEC-Q100 is not applicable as stated because no automotive qualification claim was provided.