A3PE600-2PQ208I - 600K-Gate ProASIC3E Flash FPGA | Microchip
부품 번호: A3PE600-2PQ208I ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $38.5 | $38.50 |
| 10 | $34.9 | $349.00 |
| 100 | $31.2 | $3,120.00 |
| 500 | $28.6 | $14,300.00 |
| 1,000 | $26.4 | $26,400.00 |
A3PE600-2PQ208I 개요
A field-programmable gate array (FPGA) is a semiconductor device containing a fabric of programmable logic blocks and interconnects that designers configure in the field. The A3PE600 belongs to the flash-based FPGA hierarchy: ProASIC3E family -> ProASIC3 generation -> flash FPGA -> programmable logic device. Unlike SRAM FPGAs, flash-based FPGAs retain their configuration in non-volatile memory, so they power up instantly and need no external configuration PROM.
Key features include the unique VersaTile architecture, where each tile operates as a three-input LUT, a D-flip-flop, or a latch with enable, maximizing fabric utilization. The single-chip, non-volatile flash fabric eliminates configuration loads, reduces board cost (low TOC), and improves security because the bitstream is stored on-chip. Speed grade -2 supports system performance suitable for glue logic, bus bridging, and control applications, and the family supports optional soft ARM Cortex-M1 implementations per the ProASIC3E datasheet.
Technically, the device is built on a 130 nm flash process with a 1.5V core supply. On-chip RAM blocks provide distributed and block storage, while abundant I/O banks support common single-ended standards for board-level interfacing. The 208-pin BFQFP provides a 0.5 mm pitch gull-wing footprint that is straightforward to inspect and rework.
Typical applications include industrial automation control, aerospace and defense subsystems, medical instrumentation, communications bridging, and test equipment, where single-chip instant-on programmable logic is valued.
Design consideration: budget the 1.5V core and 3.3V I/O rails with clean decoupling, and confirm the industrial -40C to +125C rating matches your thermal environment before finalizing the BOM.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: A3PE600-2PQ208I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: A3PE600-2PQ208I (동일 폼 팩터 및 풋프린트) — 차이점: Package, Family, Process Technology, Configuration Memory, Operating Temperature.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
A3PE600-2PQ208
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
A3PE600-PQ208I
✅ 드롭인✓ 재고 있음
$47.9 / 개
데이터시트 보기 →A3PE600-PQG208
✅ 드롭인✓ 재고 있음
$24.64 / 개
데이터시트 보기 →A3PE600-PQG208IX218
✅ 드롭인✓ 재고 있음
$47.8 / 개
데이터시트 보기 →A3PE600-2PQ208IX
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
A3PE600-2PQ208I 최대 정격 & 전기적 특성
| Family | ProASIC3E |
| System Gates | 600,000 |
| User I/O | 147 |
| Embedded RAM | 110,592 bits |
| Speed Grade | -2 |
| Core Supply Voltage | 1.5 V |
| Process Technology | 130 nm Flash |
| Logic Element Type | VersaTile (3-input LUT / D-FF / latch) |
| Configuration Memory | On-chip flash, non-volatile, single chip |
| 동작 온도 | -40C to +125C (Industrial, I suffix) |
| 패키지 | 208-BFQFP (PQFP), surface mount |
| 실장 유형 | Surface Mount |
| Max Design Frequency | 231 MHz (per FindIC cross-reference listing) |
| Soft CPU Support | Optional soft ARM (per ProASIC3E datasheet) |
| Reprogrammability | Yes, in-system flash reprogrammable |
| Total Cost of Ownership | Low (single-chip, no external configuration device) |
A3PE600-2PQ208I 208-bfqfp (pqfp), surface mount 핀 구성 가이드
A3PE600-2PQ208I(208-bfqfp (pqfp), surface mount 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: A3PE600-2PQ208I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
A3PE600-2PQ208I 적합 용도: 6 애플리케이션s: Industrial Automation Control, Aerospace and Defense Subsystems, Medical Instrumentation, Communications Protocol Bridging, Test and Measurement Equipment, Embedded Soft ARM Control Systems.
Industrial Automation Control
The A3PE600-2PQ208I fits industrial automation because its -40C to +125C industrial rating survives factory-floor temperature swings, and its non-volatile flash fabric starts instantly at power-up - no configuration cycle delays that SRAM FPGAs impose on PLC and motion-control boards that must be deterministic from the first millisecond. With 147 user I/O and 600K gates, it aggregates sensor inputs, implements state machines, and bridges legacy field-bus parallel interfaces to modern controllers. In circuit terms it sits between the backplane connectors and a host CPU, handling glue logic, mailbox registers, and interrupt control. The trade-off versus an SRAM FPGA is lower fabric speed (130nm, -2 grade), so keep high-speed serialization off this device and use it for control-plane logic where its single-chip BOM advantage wins.
추천
Aerospace and Defense Subsystems
Aerospace and defense designers value the A3PE600-2PQ208I for three concrete reasons drawn from the ProASIC3E datasheet: on-chip flash configuration improves bitstream security because there is no external configuration ROM to read or clone; the fabric is reprogrammable for mission updates; and the industrial temperature range plus Microsemi's heritage in high-reliability FPGA supply supports long program lifecycles. The 600K-gate capacity handles telemetry framing, bus interfaces, and housekeeping logic, while 110,592 bits of embedded RAM buffer packetized sensor data. In the signal chain, the device typically sits between redundant sensor inputs and a flight computer, providing front-end formatting and voter logic. Note that space-grade variants exist elsewhere in the Microchip portfolio; the commercial-industrial A3PE600-2PQ208I is aimed at ground and airborne auxiliary systems, not radiation-exposed orbits.
추천
Medical Instrumentation
Medical diagnostic equipment benefits from the A3PE600-2PQ208I's deterministic instant-on startup, which shortens instrument boot time, and its single-chip flash architecture that removes external configuration parts from boards subject to IEC design review scrutiny. The 147 user I/O connect front-end analog modules, rotary/signal interfaces, and display buses, while the 600K VersaTile fabric implements timing generators, filters' control logic, and communication bridges to a host processor. Because the fabric is reprogrammable in-system, feature updates can be deployed across an installed instrument fleet without board changes. A design consideration: the device provides logic, not precision analog, so pair it with dedicated ADCs and reference ICs; the FPGA handles sequencing and data routing. The 208-pin QFP's gull-wing leads also simplify rework on low-volume medical boards where BGA reflow is impractical.
추천
Communications Protocol Bridging
For line-card and gateway boards, the A3PE600-2PQ208I serves as a protocol bridge between legacy parallel buses and modern serial interfaces. Its 147 I/O support the many single-ended pins that parallel standards demand, and the 110,592-bit embedded RAM implements FIFOs that clock-domain-cross data between asynchronous subsystems. The ProASIC3E VersaTile architecture lets each tile act as a 3-input LUT or a D-flip-flop with enable, which suits the register-heavy structures of UART, SPI, and parallel-to-serial bridge cores. Instant-on flash configuration means the bridge is live before the host finishes booting - useful for hot-swappable telecom slots. The -2 speed grade constrains line rates to the tens-of-MHz class per FindIC-listed 231 MHz figures, so keep multi-gigabit serialization on dedicated PHY devices and reserve this FPGA for control and bridging planes.
추천
Test and Measurement Equipment
Bench and rack instruments use the A3PE600-2PQ208I for trigger logic, timing generators, and interface formatting. The instant-on flash fabric lets a measurement instrument be capture-ready within milliseconds of power-up, an advantage over SRAM FPGAs that spend boot time loading configuration from external flash. The 600K-gate fabric implements pattern generators and comparator logic, while 110,592 bits of RAM buffer capture data streamed to a USB or Ethernet host interface. In the signal chain the FPGA typically sits between front-end conditioning circuits and the instrument's processor, timestamping events and routing channels. Designers should verify the -2 speed grade meets their sampling clock domain (FindIC-listed figures around 231 MHz class) and use synchronous design practices in Libero SoC for metastability-safe clock crossings on the capture path.
추천
Embedded Soft ARM Control Systems
The ProASIC3E datasheet states the family supports optional soft ARM Cortex-M1 implementations, so the A3PE600-2PQ208I can host a 32-bit processor core synthesized in the VersaTile fabric alongside custom peripherals - replacing a separate microcontroller on compact control boards. This suits motor drivers, environmental monitors, and secure embedded controllers where board area and BOM consolidation matter. The 600K-gate capacity leaves room for the soft CPU plus UART, SPI, GPIO, and interrupt controllers, with 110,592 bits of RAM serving as scratch and buffer memory. Development happens in Microchip Libero SoC with the Cortex-M1 software flow. A key consideration: soft-core performance is modest compared with discrete MCUs, so validate your clock budget early; the trade-off gained is single-chip integration, instant-on boot, and flash-based field updates of both hardware and firmware.
추천
추천 제품 요약
엔지니어링 참조 데이터: A3PE600-2PQ208I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | A3PE600-2PQ208 | A3PE600-PQ208I | A3PE600-PQG208 | A3PE600-PQG208IX218 |
|---|---|---|---|---|---|
| Package | 208-BFQFP | 208-PQFP - same footprint | 208-PQFP - same footprint | 208-PQGFP - same footprint | 208-PQGFP - same footprint |
| Brand | Microsemi (Microchip) | Microsemi (Microchip) | Microsemi (Microchip) | Microsemi (Microchip) | Microsemi (Microchip) |
| System Gates | 600,000 | 600,000 | 600,000 | 600,000 | 600,000 |
| User I/O | 147 | 147 | 147 | 147 | 147 |
| Embedded RAM | 110,592 bits | 110,592 bits | 110,592 bits | 110,592 bits | 110,592 bits |
| Configuration Memory | On-chip flash, non-volatile | On-chip flash, non-volatile | On-chip flash, non-volatile | On-chip flash, non-volatile | On-chip flash, non-volatile |
주요 차별점
- Industrial temperature qualification in a mostly-commercial package family (vs A3PE600-2PQ208)
- Fastest standard speed grade in the 208-pin QFP ProASIC3E lineup (vs A3PE600-PQ208I)
- Single-chip non-volatile configuration (vs SRAM FPGAs (no verified pin-compatible cross-brand equivalent exists))
설계 노트
The A3PE600-2PQ208I uses a 1.5V core supply on the 130nm flash process, with I/O banks typically powered at 3.3V per the ProASIC3E family data. Decouple each supply pin with 0.1uF ceramic capacitors placed within 2 mm of the pin, plus bulk 10uF per rail. Because flash FPGAs draw near-zero configuration current at power-up, inrush is dominated by decoupling capacitors - size your supply's soft-start accordingly. Confirm exact pin list and I/O bank voltages from the ProASIC3E datasheet (document 50003270B) before tape-out.
The 208-pin BFQFP has 0.5 mm gull-wing pitch; define pads per the mechanical drawing in the Microchip datasheet and use a 1x1 mm thermal pattern under the die area if routing allows. Keep unused I/O configured as inputs with weak pull-down or tri-state per Libero SoC defaults to avoid floating-node EMI. Route the JTAG chain with series termination on TDI/TMS/TCK for reliable programming in-system.
Substituting the commercial A3PE600-2PQ208 for the industrial -I part in a -40C application will cause characterization and field failures - the suffix matters. Also, -1 and -2 speed grades are not freely interchangeable: a design closed on -2 may violate timing on -1 (FindIC lists different max-frequency figures per grade). Always re-run static timing analysis in Microchip Libero SoC after any ordering-code substitution, and verify the temperature-grade boundary conditions at the timing corners.
규정 준수 정보
Compliance status not stated in the provided verified web data; confirm on the Microchip product page for A3PE600 before procurement.
