A42MX16-2PQG208I - 24K Gate MX FPGA, 140 I/O | Microchip
부품 번호: A42MX16-2PQG208I ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $48.5 | $48.50 |
| 10 | $44.1 | $441.00 |
| 100 | $39.8 | $3,980.00 |
| 500 | $36.2 | $18,100.00 |
| 1,000 | $32.9 | $32,900.00 |
A42MX16-2PQG208I 개요
A field-programmable gate array (FPGA) is a semiconductor device containing configurable logic blocks (CLBs) and programmable interconnects that the designer wires together after manufacturing, occupying the middle of the programmable logic hierarchy between CPLDs and full ASICs. The Microchip (formerly Microsemi/Actel) MX family is a 5.0 V-tolerant antifuse-based FPGA platform positioned as a reliable, single-chip ASIC alternative for high-volume legacy PLD integration.
Key features of the A42MX16-2PQG208I include 608 configurable logic blocks (CLBs), approximately 24,000 equivalent gates, a maximum clock frequency of about 56.16 MHz for this -2 speed grade, and dual supply ranges of 3V to 3.6V and 4.5V to 5.5V supported by the MX 5.0 V architecture. The lead-free, RoHS-oriented PQG208 package suits conventional surface-mount assembly.
Technically, the MX family uses antifuse programmable interconnect, which is non-volatile and radiation-tolerant by nature: configuration is permanent at power-up, removing the need for an external configuration flash and improving SEU robustness versus SRAM FPGAs. The 42MX16 die sits mid-family, below the A42MX24 and A42MX36, sharing the same architecture and toolchain (Microchip Libero SoC).
Typical applications include legacy 5V system consolidation, industrial control glue logic replacement, aerospace/military program migration from obsolete PLDs, and high-volume embedded control where single-chip ASIC cost is not justified.
Design consideration: the 208-PQFP 28x28 mm body requires careful fanout; the industrial -40C to +85C rating of the I suffix must be preserved by keeping junction temperature within limits given the FPGA's static and I/O current.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: A42MX16-2PQG208I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: A42MX16-2PQG208I (동일 폼 팩터 및 풋프린트) — 차이점: Package, System Gates, RoHS Status, Logic Cells, Family.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
A42MX16-PQG208I
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →A42MX16-1PQG208I
✅ 드롭인✓ 재고 있음
$299.95 / 개
데이터시트 보기 →A42MX16-1PQG208
✅ 드롭인✓ 재고 있음
$1 / 개
데이터시트 보기 →A42MX36-PQG208I
✅ 드롭인✓ 재고 있음
$55 / 개
데이터시트 보기 →A42MX36-2PQG208I
✅ 드롭인✓ 재고 있음
$1 / 개
데이터시트 보기 →A42MX36-2PQG208
✅ 드롭인✓ 재고 있음
$44.2 / 개
데이터시트 보기 →A42MX36-1PQG208
✅ 드롭인✓ 재고 있음
$45.3 / 개
데이터시트 보기 →A42MX36-FPQG208
✅ 드롭인✓ 재고 있음
$39.8 / 개
데이터시트 보기 →A42MX16-2PQG208I 최대 정격 & 전기적 특성
| Family | MX (42MX) |
| System Gates | 24000 gates |
| Configurable Logic Blocks (CLBs) | 608 |
| User I/O | 140 |
| Speed Grade | -2 |
| 최대 클록 주파수 | 56.16 MHz |
| Supply Voltage Range | 3V to 3.6V; 4.5V to 5.5V |
| Programming Technology | Antifuse (non-volatile) |
| 패키지 | 208-PQFP (28x28 mm), 0.5 mm pitch |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40C to +85C (industrial, I suffix) |
| JTAG / IEEE 1149.1 | Supported on MX family boundary-scan capable devices |
| RoHS 상태 | Compliant / Lead Free |
| Pin-Compatible Ceramic Option | CQ208 (pin-compatible with PQ208) |
| Design Software | Microchip Libero SoC |
A42MX16-2PQG208I 208-pqfp (28x28 mm), 0.5 mm pitch 핀 구성 가이드
A42MX16-2PQG208I(208-pqfp (28x28 mm), 0.5 mm pitch 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: A42MX16-2PQG208I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
A42MX16-2PQG208I 적합 용도: 6 애플리케이션s: Legacy 5V System Consolidation, Industrial Control and Automation, Aerospace and Defense Program Sustainment, ASIC Prototyping and Bridge Logic, Medical Equipment Legacy Boards, Communication and Networking Interface Cards.
Legacy 5V System Consolidation
The A42MX16-2PQG208I's 5.0 V-tolerant MX architecture with 3V-3.6V and 4.5V-5.5V supply ranges lets engineers collapse multiple obsolete PLDs, PALs, and glue-logic devices into one antifuse FPGA without level-shifting on 5V buses. Its 24,000 gates and 140 user I/O cover typical multi-device consolidation, while non-volatile antifuse configuration gives instant-on behavior identical to the discrete parts being replaced. This makes it a low-risk migration path for industrial equipment and test instruments still running legacy rails, per Microchip's MX positioning as a single-chip ASIC alternative.
추천
Industrial Control and Automation
In factory automation and process control, the A42MX16-2PQG208I provides deterministic, configuration-fixed logic for sequencing, interlocking, and interface translation. The industrial -40C to +85C rating, 5V-tolerant I/O for sensors and actuators, and instant-on antifuse startup eliminate boot-time gaps that SRAM FPGAs introduce after power loss. The -2 speed grade's ~56.16 MHz capability comfortably covers state machines and bus interfaces in this domain. Its permanence of configuration also simplifies functional-safety arguments where unintended reconfiguration is unacceptable on the plant floor.
추천
Aerospace and Defense Program Sustainment
Microchip MX antifuse FPGAs are widely used to sustain defense and aerospace platforms because the technology is inherently single-event-upset tolerant - configuration is hard-wired, not stored in volatile cells. The pin-compatible CQ208 ceramic package screened toward MIL-STD-883 levels allows plastic PQ208 prototypes to convert directly to qualified ceramic production parts without board redesign, as stated in the Microchip datasheet. For programs locked to the A42MX16 die, the A42MX16-2PQG208I supports industrial-temperature prototype builds ahead of ceramic qualification runs.
추천
ASIC Prototyping and Bridge Logic
The A42MX16-2PQG208I serves as a low-cost ASIC alternative for mid-volume products where mask costs cannot be justified, and as bridge logic between mismatched bus standards on mixed-voltage boards. Its antifuse fabric provides fixed timing after programming - useful when validating interfaces destined for ASIC conversion - and the 208-PQFP's 0.5 mm pitch is hand-solderable for lab rework. Designers typically implement bus bridges, address decoders, and custom peripherals within the 24K-gate budget, migrating to the pin-compatible A42MX36 PQ208 parts when gate count grows.
추천
Medical Equipment Legacy Boards
Medical device manufacturers maintaining long-lifecycle equipment use the A42MX16-2PQG208I to keep obsolete control boards in production without recertification of the whole system. The non-volatile antifuse configuration preserves deterministic power-up behavior required by patient-connected equipment, while industrial temperature rating covers clinical environments. Because the part is still active from Microchip and shares the MX architecture across A42MX16/A42MX36 PQ208 members, last-time-buy risk is mitigated by documented pin-compatible successors on the identical footprint.
추천
Communication and Networking Interface Cards
On line cards and protocol adapters, the A42MX16-2PQG208I implements framing, formatting, and backplane glue logic with 5V-tolerant I/O that connects directly to legacy backplanes. The 140 user I/O accommodate wide parallel buses, and the fixed antifuse routing delivers repeatable signal timing across units - important for multi-slot systems. The -2 speed grade supports interface clock rates within the family's ~56 MHz class. For higher-throughput designs, the same-footprint A42MX36 parts double the logic without PCB respin, protecting the layout investment.
추천
추천 제품 요약
엔지니어링 참조 데이터: A42MX16-2PQG208I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | A42MX16-PQG208I | A42MX16-1PQG208I | A42MX36-PQG208I | A42MX36-2PQG208I |
|---|---|---|---|---|---|
| Package | 208-PQFP (PQ208) | 208-PQFP - same | 208-PQFP - same | 208-PQFP - same | 208-PQFP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 24000 | 24000 | 24000 | ~2x A42MX16 (36K-class die) | ~2x A42MX16 (36K-class die) |
| User I/O | 140 | 140 | 140 | 140 (PQ208-limited) | 140 (PQ208-limited) |
| Temperature Range | -40C to +85C (I) | I (industrial) | I (industrial) | I (industrial) | I (industrial) |
| Supply Voltage Range | 3V-3.6V / 4.5V-5.5V | 3V-3.6V / 4.5V-5.5V | 3V-3.6V / 4.5V-5.5V | 3V-3.6V / 4.5V-5.5V | 3V-3.6V / 4.5V-5.5V |
| Programming Technology | Antifuse (non-volatile) | Antifuse | Antifuse | Antifuse | Antifuse |
주요 차별점
- Non-volatile antifuse configuration - no boot flash, instant-on, SEU-tolerant (vs A42MX16-PQG208I (and all SRAM FPGAs))
- 5V-tolerant dual-rail I/O architecture (vs A42MX16-1PQG208I)
- Pin-compatible gate-count upgrade without respin (vs A42MX36-2PQG208I)
설계 노트
The MX family supports dual supply ranges (3V-3.6V and 4.5V-5.5V); identify which rail each bank uses before schematic capture and never mix them on one bank. Estimated: with 140 I/O, simultaneously switching outputs can drive tens of milliamps per bank - budget core and I/O current separately and size the 3.3V/5V regulators accordingly. Decouple each VCC/VDDA pin pair with 0.1 uF ceramics placed within 2 mm of the pin, plus bulk 10 uF per rail.
The 208-PQFP has 0.5 mm lead pitch; specify a solder-mask-defined footprint per IPC-compatible PQFP land patterns and inspect with AOI or X-ray for bridging on fine-pitch rows. Route JTAG (TCK/TMS/TDI/TDO) as a short daisy chain with series resistors near the header to limit ringing. Because antifuse parts are programmed post-assembly, keep programming-pad access or plan socketed prototypes; reprogramming is impossible after fuse blowing.
The most common MX design error is treating this like an SRAM FPGA: there is no external configuration flash and no in-field reconfiguration - each logic change consumes a new device. Order the full ordering code including speed grade and I suffix; mixing commercial-range parts into -40C applications causes field failures. Verify the -2 timing constraints in Libero rather than assuming -1 data; and for upgrade paths, design the board to the PQ208 pin map so A42MX36 PQ208 parts drop on later.
규정 준수 정보
Distributor listings (Kynix, PCB Electronics) mark the part LEAD FREE; the G in PQG208 indicates green/lead-free packaging. REACH, halogen-free, and conflict-minerals status not stated in provided data.
