A54SX32A-TQG176I - 32K Gates SX-A FPGA 176-TQFP | Microsemi
부품 번호: A54SX32A-TQG176I ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $62.5 | $62.50 |
| 10 | $56.8 | $568.00 |
| 100 | $51.2 | $5,120.00 |
| 500 | $47.6 | $23,800.00 |
| 1,000 | $43.9 | $43,900.00 |
A54SX32A-TQG176I 개요
An FPGA (Field Programmable Gate Array) is a class of programmable logic IC that lets designers implement custom digital circuits in hardware after manufacturing, sitting in the system hierarchy between fixed-function ASICs and general-purpose processors. The SX-A family uses a sea-of-modules architecture in which the entire die floor is covered by a grid of logic modules with virtually no area lost to routing, combining the density of ASICs with the flexibility of programmable logic.
Key features include 320 MHz internal performance, 3.7 ns pin-to-pin clock-to-output, 0.1 ns input setup time, and 0.25 ns clock skew, enabling single-chip integration of glue logic, bus interfaces, and control functions that previously required multiple devices. The family provides two logic module types: the register cell (R-cell) and the combinatorial cell (C-cell), supporting 100% resource utilization with 100% pin locking.
Architecturally, the sea-of-modules structure simplifies timing closure and dramatically reduces design cost, power consumption, and time to market for performance-intensive applications. The antifuse-based programming of the SX-A family makes it suitable where configuration security and immediate power-up operation matter.
Typical applications include industrial control and automation, communications and networking equipment, 5G-adjacent infrastructure glue logic, and aerospace/defense program replacements for end-of-life logic, where the industrial temperature grade (I suffix) is required.
Design consideration: verify timing at your target speed grade and confirm the 2.25V-5.25V supply planning against the datasheet's thermal and I/O guidelines before locking the 176-pin footprint.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: A54SX32A-TQG176I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: A54SX32A-TQG176I (동일 폼 팩터 및 풋프린트) — 차이점: Family, System Gates, Process Technology, Operating Temperature, Core Supply Voltage.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
A54SX32-TQG176I
✅ 드롭인✓ 재고 있음
$86.75 / 개
데이터시트 보기 →A54SX32-TQ176I
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →A54SX32-TQ176
✅ 드롭인✓ 재고 있음
$42.5 / 개
데이터시트 보기 →A54SX32-1TQG176
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$43.6 / 개
데이터시트 보기 →A54SX32-2TQG176I
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$55.1 / 개
데이터시트 보기 →A54SX32A-TQG176I 최대 정격 & 전기적 특성
| Logic Gates | 32000 gates |
| Logic Modules (Cells) | 1800 cells |
| User I/O | 147 |
| Maximum Internal Frequency | 238 MHz |
| Process Technology | 0.25 um |
| 공급 전압 | 2.25 V to 5.25 V |
| Core Supply Voltage | 2.5 V |
| 패키지 | 176-TQFP (24x24 mm) |
| 실장 유형 | Surface Mount |
| Clock-to-Out (Pin-to-Pin) | 3.7 ns |
| Input Set-Up Time | 0.1 ns |
| Clock Skew | 0.25 ns |
| Operating Temperature Grade | Industrial (I suffix) |
| Packaging | Tray |
| Family | SX-A (Actel/Microsemi/Microchip) |
| Architecture | Sea-of-modules (R-cell and C-cell) |
A54SX32A-TQG176I 176-tqfp (24x24 mm) 핀 구성 가이드
A54SX32A-TQG176I(176-tqfp (24x24 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: A54SX32A-TQG176I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
A54SX32A-TQG176I 적합 용도: 6 애플리케이션s: Industrial Control and Automation, Communications and Networking Equipment, Aerospace and Defense Legacy Sustainment, Test and Measurement Instrumentation, Medical Device Control Logic, 5G-Adjacent Infrastructure and Baseband Glue Logic.
Industrial Control and Automation
The A54SX32A-TQG176I fits industrial control and automation systems because its industrial temperature grade (I suffix), 2.25V to 5.25V supply tolerance, and 147 user I/O support direct interfacing with PLC backplanes, motor controllers, and legacy 5V logic. With 32,000 gates and 1800 logic modules, it integrates address decoding, bus bridging, sequencers, and I/O expansion that previously occupied several TTL devices. Placed as the single-chip control fabric between a microprocessor and field I/O, it delivers 3.7 ns pin-to-pin clock-to-out for deterministic response, while its antifuse-based configuration is active at power-up with no boot device, eliminating configuration-time delays that matter in safety-relevant machinery startup sequences.
추천
Communications and Networking Equipment
In networking and communications equipment, the A54SX32A-TQG176I serves as glue logic between line cards, backplanes, and processors. Its 238 MHz internal performance class, 0.1 ns input setup, and 0.25 ns clock skew support synchronous data-path control at line-card rates, while the 176-TQFP 24x24 mm package suits 3U/6U CompactPCI and similar card-based form factors. The sea-of-modules architecture achieves 100% resource utilization with 100% pin locking, so board respins do not force FPGA pin reassignment. Because the SX-A configuration is non-volatile antifuse, line cards power up functional immediately, simplifying hot-swap bring-up and reducing the need for configuration PROMs in telecom racks.
추천
Aerospace and Defense Legacy Sustainment
The A54SX32A-TQG176I is widely used to sustain aerospace and defense platforms designed around Actel antifuse FPGAs. Its industrial grade, non-volatile antifuse programming (resistant to configuration upsets and readout), and stable 0.25 um process make it a low-risk choice where redesign qualification is costly. Systems use it for telemetry formatting, bus interface bridging (MIL-STD-1553-adjacent glue logic), and voter/comparator functions. The 32K-gate capacity accommodates moderate control-plane logic while the 147 I/O cover parallel backplanes. Because the device is still procurable through distributors such as DigiKey and Octopart (4 distributors), obsolescence risk for existing programs is reduced compared to fully discontinued actel parts.
추천
Test and Measurement Instrumentation
Bench and rack instrumentation uses the A54SX32A-TQG176I as the real-time control fabric between acquisition front ends and processing back ends. The 3.7 ns clock-to-out and 0.25 ns clock skew let designers build tight trigger timing and counter/timer channels, while 32,000 gates implement state machines, histogram logic, and interface sequencing. The 5V-tolerant supply range (2.25V-5.25V) simplifies interfacing with legacy instrument buses and discrete front-end circuitry. Because the antifuse fabric does not require configuration loading, instruments are measurement-ready within milliseconds of power-on, an advantage in automated test equipment (ATE) where per-unit setup time multiplies across high-volume production test.
추천
Medical Device Control Logic
Medical diagnostic and monitoring equipment benefits from the A54SX32A-TQG176I as deterministic control logic between sensors, display drivers, and communication interfaces. The industrial temperature tolerance covers typical clinical environments, and the fixed antifuse configuration guarantees identical logic behavior on every power cycle, which supports design verification and regulatory documentation of firmware-independent control paths. With 147 user I/O, one device integrates front-panel switch scanning, LED/lamp control, sensor multiplexing, and host interface handshaking. The 176-TQFP surface-mount package with 0.5 mm class leads supports standard reflow assembly used in medical electronics manufacturing.
추천
5G-Adjacent Infrastructure and Baseband Glue Logic
In modern 5G-adjacent infrastructure builds, the A54SX32A-TQG176I is used for control-plane glue logic around higher-performance baseband and RF processing chains: clock distribution control, alarm aggregation, JTAG/serial muxing, and power-sequencing supervision. Its 238 MHz performance class exceeds the needs of these slow-control paths, while the antifuse configuration provides immediate-on operation during fast base-station restarts. The 5V-tolerant I/O range eases integration with legacy monitoring circuitry, and the 176-TQFP 24x24 mm footprint fits standard telecom card layouts. Distributor availability (DigiKey, Mouser, 4 sources via Octopart) supports both new builds and field replacement.
추천
추천 제품 요약
엔지니어링 참조 데이터: A54SX32A-TQG176I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | A54SX32-TQG176I | A54SX32-TQ176I | A54SX32-TQ176 | A54SX32-1TQG176 | A54SX32-2TQG176I |
|---|---|---|---|---|---|---|
| Package | 176-TQFP (24x24 mm) | 176-TQFP (24x24 mm) - same | 176-TQFP (24x24 mm) - same | 176-TQFP (24x24 mm) - same | 176-TQFP (24x24 mm) - same | 176-TQFP (24x24 mm) - same |
| Brand | Microsemi (Microchip) | Microsemi (Microchip) | Microsemi (Microchip) | Microsemi (Microchip) | Microsemi (Microchip) | Microsemi (Microchip) |
| Logic Gates | 32000 | 32000 | 32000 | 32000 | 32000 | 32000 |
| Logic Modules | 1800 | 1800 | 1800 | 1800 | 1800 | 1800 |
| User I/O | 147 | 147 | 147 | 147 | 147 | 147 |
| Supply Voltage | 2.25 V to 5.25 V | 2.25 V to 5.25 V | 2.25 V to 5.25 V | 2.25 V to 5.25 V | 2.25 V to 5.25 V | 2.25 V to 5.25 V |
| Family | SX-A | SX | SX | SX | SX | SX |
주요 차별점
- SX-A advanced family performance over original SX (vs A54SX32-TQG176I)
- Industrial temperature rating (vs A54SX32-TQ176)
- Cost/performance balance vs faster speed grades (vs A54SX32-1TQG176)
- Antifuse security and instant-on behavior (vs SRAM-based FPGAs)
설계 노트
The A54SX32A-TQG176I specifies a 2.25V to 5.25V supply range with 2.5V core nominal. Decouple each VCC/VDDA pin pair with at least 0.1 uF ceramic capacitors placed within 5 mm of the pin, plus bulk capacitance per the SX-A family datasheet power recommendations. Because antifuse FPGA current is design-dependent, run the Microchip design software power estimator on your final routed netlist rather than relying on typical values, especially at the 238 MHz performance class.
Estimated: the SX-A family datasheet states that thermal characteristics depend on the device and package, operating temperature, operating current, and the system ability to dissipate heat. The 176-TQFP 24x24 mm package dissipates heat primarily through its leads, so provide solid ground and power planes connected to thermal relief patterns under the package. For industrial-ambient enclosures above 70C, calculate junction temperature as TA plus (power x theta_JA from the datasheet package table) and keep TJ below the absolute maximum rating with margin.
The I suffix device is industrial grade; do not substitute commercial-grade variants (e.g., A54SX32-TQ176) in industrial-temperature designs. Antifuse FPGAs are one-time programmable: lock your pin assignments and verify timing in simulation before programming production parts, since a design error cannot be fixed by reconfiguration. When substituting SX-family parts for SX-A parts, FindIC data notes that some electrical characteristics differ - re-verify setup/hold and clock-to-out timing against your system budget.
With 147 user I/O in a 176-TQFP, heavily loaded buses can exceed the 0.25 ns clock skew budget if I/O standards are mixed carelessly. Keep each clock domain on dedicated clock pins, use series termination (22-33 ohm) on fast edges leaving the package, and match trace lengths for synchronous bus groups. Consult the SX-A family datasheet I/O timing tables for the specific input setup (0.1 ns nominal) and output delay values at your speed grade.
규정 준수 정보
RoHS status not stated in the verified distributor listings for this exact MPN; legacy Microsemi SX-A parts exist in both RoHS and non-RoHS builds. Obtain compliance certificates from the distributor before ordering for restricted markets.
