A54SX08-1TQG176I - 12K-Gate SX FPGA, 176-TQFP | Microsemi
부품 번호: A54SX08-1TQG176I ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $62.5 | $62.50 |
| 10 | $56.2 | $562.00 |
| 100 | $49.8 | $4,980.00 |
| 500 | $44.1 | $22,050.00 |
| 1,000 | $39.3 | $39,300.00 |
A54SX08-1TQG176I 개요
An FPGA is a programmable logic device that implements custom digital circuits by configuring a fabric of logic blocks and interconnect. The SX family belongs to the higher tier of the Actel/Microsemi FPGA hierarchy, sitting above the ACT-series FPGAs and using a sea-of-modules antifuse architecture that delivers application-specific-IC-like performance and routing density in a one-time-programmable device. Unlike SRAM FPGAs, the antifuse configuration is non-volatile, radiation-tolerant by nature, and requires no configuration PROM, simplifying the bill of materials and improving design security.
Key features include a 0.35 um process technology with toggle rates up to 280 MHz, dual supply voltage operation (3.0 V to 3.6 V core and 4.75 V to 5.25 V I/O per Microchip USA data), and 128 programmable user I/Os configurable for interfacing with 5 V-tolerant peripheral systems. The -1 speed grade balances performance with power, and the industrial I-suffix rating supports operation in harsh environments.
The sea-of-modules architecture uses two module types, combinational and sequential, in an 8:2 ratio, providing efficient implementation of both wide and narrow logic functions with predictable, low-skew timing. Because routing is fixed at programming time via antifuse links, the device exhibits deterministic interconnect delays that simplify static timing analysis.
Typical applications include industrial control and automation, communications and networking glue logic, bridge and interface logic, and defense/aerospace embedded control where one-time programmability and configuration immunity are valued.
Design consideration: as a one-time-programmable antifuse device, functional errors cannot be re-fixed in the field, so complete simulation with the Libero/Designer flow is mandatory before programming.
This page synthesizes distributor data, family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: A54SX08-1TQG176I — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: A54SX08-1TQG176I (동일 폼 팩터 및 풋프린트) — 차이점: System Gates, Series, Process Technology, Package, Package / Case.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
A54SX08-2TQG176I
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$28.9 / 개
데이터시트 보기 →A54SX08-TQG176I
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$59.75 / 개
데이터시트 보기 →A54SX08-1TQG176
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$17.1 / 개
데이터시트 보기 →A54SX16-TQG176I
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
가격 문의
데이터시트 보기 →A54SX16-1TQG176I
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
가격 문의
데이터시트 보기 →A54SX32-1TQG176I
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$45.2 / 개
데이터시트 보기 →A54SX08-1TQG176I 최대 정격 & 전기적 특성
| Family | Actel SX (54SX) |
| System Gates | 12000 |
| Logic Cells | 512 |
| Logic Array Blocks (LABs) | 768 |
| User I/Os | 128 |
| Speed Grade | -1 |
| Maximum Toggle Rate | 280 MHz |
| Process Technology | 0.35 um |
| Supply Voltage (Core) | 3 V to 3.6 V |
| Supply Voltage (I/O) | 4.75 V to 5.25 V |
| Programming Technology | Antifuse (one-time programmable) |
| 동작 온도 | -40C to +85C (industrial, per I suffix) |
| 패키지 | 176-TQFP (24x24 mm) |
| 실장 유형 | Surface Mount |
| Architecture | Sea-of-modules |
A54SX08-1TQG176I 176-tqfp (24x24 mm) 핀 구성 가이드
A54SX08-1TQG176I(176-tqfp (24x24 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: A54SX08-1TQG176I.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
A54SX08-1TQG176I 적합 용도: 6 애플리케이션s: Industrial Control and Automation, Communications and Networking Glue Logic, Defense and Aerospace Embedded Logic, Legacy Board Continuation and Obsolescence Management, 5V-Tolerant Interface and Bridge Logic, Test and Measurement Instrumentation.
Industrial Control and Automation
The A54SX08-1TQG176I fits industrial control because its industrial temperature rating (-40C to +85C), 5 V-tolerant I/O operation (4.75 V to 5.25 V I/O rail), and non-volatile antifuse configuration remove the boot-time configuration step that SRAM FPGAs require on factory-floor equipment that must be live at power-up. In a PLC or motor-control interface card, the 128 user I/Os and 12,000 gates implement encoder interfaces, PWM generation, and safety-interlock glue logic with deterministic timing (0.35 um fabric toggling to 280 MHz). Because routing is fixed at programming, propagation delays do not vary with reconfiguration, simplifying certification of deterministic control paths.
추천
Communications and Networking Glue Logic
In line cards, backplane bridges, and telecom adapters, the A54SX08-1TQG176I implements address decoding, bus formatting, and protocol adaptation between processors and PHY devices. Its 280 MHz toggle capability supports high-speed counters and shift-register functions, while the sea-of-modules fabric provides low, predictable interconnect delay for tight setup/hold budgets between the FPGA and companion ASICs. The 176-TQFP 24x24 mm footprint offers a practical 0.5 mm-pitch lead frame for two-layer routing of 128 I/Os, and the one-time-programmable configuration eliminates the configuration PROM that would otherwise occupy board space and add a boot sequence to the link bring-up time.
추천
Defense and Aerospace Embedded Logic
Antifuse FPGAs are valued in defense and aerospace systems because the one-time-programmed configuration cannot be disturbed by radiation-induced configuration upsets, unlike SRAM fabrics. The A54SX08-1TQG176I provides 12,000 system gates for sensor interfaces, telemetry formatting, and redundant-signal voting logic in upgrade programs where the original Actel SX design must be maintained. The industrial -1 grade part suits ground-based and laboratory defense electronics, while the non-volatile fabric removes power-up configuration risk in mission equipment. Its deterministic routing also eases worst-case timing analysis required by high-reliability design reviews, and Microchip continues to support the family for legacy program continuity.
추천
Legacy Board Continuation and Obsolescence Management
Programs maintaining boards designed around Actel SX devices rely on the A54SX08-1TQG176I for exact re-creation of the original logic image, since the antifuse bitstream remains archivable and re-programmable onto new dies indefinitely. When a production run needs more logic but cannot change the PCB, drop-in family upgrades in the same 176-TQFP footprint (A54SX16-TQG176I, A54SX32-1TQG176I) absorb design growth without respin. Because the SX08 design database compiles identically across speed-grade variants within the family, obsolescence managers can qualify A54SX08-2TQG176I as a second source with only timing re-verification, protecting against allocation shortages on the -1 grade.
추천
5V-Tolerant Interface and Bridge Logic
Many industrial and test systems still run 5 V peripheral buses, and the A54SX08-1TQG176I directly accommodates a 4.75 V to 5.25 V I/O supply, eliminating the level-shifting buffers that modern 1.2-3.3 V FPGAs demand at every boundary. The 128 user I/Os connect to legacy SCSI, VME-style backplanes, and TTL sensor clusters, while the 3.0 V to 3.6 V core rail keeps dynamic power manageable. With 512 logic cells, the device implements bus arbitration, wait-state generation, and parallel-to-serial bridging between a 5 V host bus and 3.3 V peripherals, consolidating dozens of 74-series devices into one 24x24 mm TQFP and cutting board area and assembly cost.
추천
Test and Measurement Instrumentation
Bench instruments and ATE fixtures benefit from the A54SX08-1TQG176I's predictable antifuse timing and instant-on operation: the programmed logic is active the moment power is applied, with no configuration latency that would skew time-stamped measurements. The 280 MHz toggle capability supports frequency counters, event timers, and pattern generators at moderate rates, while 128 I/Os drive probe matrices and relay-control arrays from one device. In fixture electronics that remain configured for years, one-time programming is an advantage because there is no configuration memory to corrupt. The industrial temperature range also permits use in temperature chambers and environmental test stations without derating.
추천
추천 제품 요약
엔지니어링 참조 데이터: A54SX08-1TQG176I — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | A54SX08-2TQG176I | A54SX08-TQG176I | A54SX08-1TQG176 | A54SX16-TQG176I | A54SX32-1TQG176I |
|---|---|---|---|---|---|---|
| Package | 176-TQFP (24x24 mm) | 176-TQFP (24x24 mm) - same | 176-TQFP (24x24 mm) - same | 176-TQFP (24x24 mm) - same | 176-TQFP (24x24 mm) - same | 176-TQFP (24x24 mm) - same |
| Brand | Microsemi (Actel) | Microsemi (Actel) | Microsemi (Actel) | Microsemi (Actel) | Microsemi (Actel) | Microsemi (Actel) |
| System Gates | 12000 | 12000 | 12000 | 12000 | 24000 | 32000 |
| User I/Os | 128 | 128 | 128 | 128 | 128 | 128 |
| Speed Grade | -1 | -2 (faster) | Standard | -1 | Standard | -1 |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C (industrial) | -40C to +85C (industrial) | 0C to +70C (commercial) | -40C to +85C (industrial) | -40C to +85C (industrial) |
| Supply Voltage | 3V-3.6V core, 4.75V-5.25V I/O | 3V-3.6V core, 4.75V-5.25V I/O | 3V-3.6V core, 4.75V-5.25V I/O | 3V-3.6V core, 4.75V-5.25V I/O | 3V-3.6V core, 4.75V-5.25V I/O | 3V-3.6V core, 4.75V-5.25V I/O |
| Programming Technology | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) |
| Design Migration Effort | Reference design | None - same die, timing only | None - same die, timing only | None - temp derating review only | Re-fit and timing re-verification | Re-fit and timing re-verification |
주요 차별점
- Identical die with faster speed grade available (vs A54SX08-2TQG176I)
- Industrial temperature rating (vs A54SX08-1TQG176)
- Lowest-cost footprint-stable option for legacy designs (vs A54SX16-TQG176I)
- 5 V I/O operation eliminated in modern FPGAs (vs Modern SRAM FPGA families)
설계 노트
Provide two supply rails: a 3.3 V (3.0-3.6 V) core rail and a 5 V (4.75-5.25 V) I/O rail per Microchip USA data. Decouple each VCC pin pair with 0.1 uF ceramic capacitors placed within 5 mm of the pin, plus bulk 10 uF at the board entry. The VPP/VPCA/VPCB programming pins are used only during antifuse programming; on the production board tie them per the 54SX datasheet programming-pin recommendation (typically grounded through specified networks) and never power them in-system.
The 176-TQFP (24x24 mm) has a 0.5 mm lead pitch; use a 2-layer fan-out or 4-layer board with 5-mil trace/space for escape routing of 128 user I/Os. Place a solid ground plane under the device and flood copper on the signal layers to reduce ground bounce when many 5 V outputs switch simultaneously. The thermal path is through the leads, so generous copper pour on all four sides of the package improves dissipation; at SX08 densities a 4-layer board needs no dedicated heatsink.
The A54SX08-1TQG176I is one-time-programmable: a logic error in a soldered device is unrecoverable. Always run complete post-layout timing simulation in the Actel/Microchip Designer flow and program and functionally test at least one socketed sample before committing a production assembly. Also verify the ordering code suffix carefully - the non-I commercial version (0C to +70C) looks nearly identical on labels but will not meet the -40C to +85C industrial requirement.
When driving 5 V TTL buses from the 128 I/Os, add 22-33 ohm series resistors on lines longer than about 10 cm to damp reflections, since the 5 V-tolerant drivers have fast edges for a 0.35 um process. Keep clock inputs short and route them on an inner layer adjacent to ground. Estimated: with a 50 pF load per output, simultaneous switching of many outputs increases ground bounce - limit concurrent switching groups or spread them across I/O banks.
규정 준수 정보
Compliance status for this specific ordering code is not stated in the verified web data; request a material declaration from Microchip Technology/Microchip USA.
